Bio direkt

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic handler, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 12 R Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12 R Rear tire condition: 80 - 100% Description: The MT 625 H telescopic handler is designed for use on construction sites for new builds and for renovations on low-rise buildings. The compact machine, with a width of 1.80 m and a height of less than 2 m, easily passes through doors and can maneuver well on congested construction sites. Its turning radius of 3.30 m and the 3 available steering modes ensure excellent maneuverability. This telescopic handler is easy to operate and is equipped with an ergonomic dashboard and the JSM joystick, which guarantee easy handling. The MT 625 H has a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 hp engine enables a speed of 25 km/h. Maintenance work is facilitated by the large opening of the engine compartment. The 90 l gear pump enables simultaneous movements of the boom and the telescope, thus providing an increase in productivity. Lrodpfxozgyb Ee Am Tsn 3rd valve, full cab, air conditioning, CE certificate.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 1,200 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 26 kW (35.35 HP), empty load weight: 4,710 kg, total length: 3,470 mm, drive type: Diesel, construction width: 1,490 mm, Rigid telehandler Load centre: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New unit Technical condition: New Front tyres type: Pneumatic Lrodjzgybxopfx Am Ten Front tyres size: 12 R Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres size: 12 R Rear tyres condition: 80 - 100% Third hydraulic valve, rear work light, front work light, heating, full cab, CE certificate,

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 3,158 h, load capacity: 3,000 kg, lifting height: 4,450 mm, load center: 600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,200 mm, motor manufacturer: KOHLER, gearing type: hydrostat, fork carriage width: 1,100 mm, fork length: 1,500 mm, fork width: 100 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 27X10-12, rear tire type: cushion tires (black), rear tire size: 23X9-10, overall weight: 8,200 kg, empty load weight: 5,200 kg, total height: 2,200 mm, total length: 3,200 mm, total width: 1,300 mm, color: yellow, Equipment: adjustable boom, cabin, fork extension, lighting, pallet forks, sideshift, ## 🚜 JCB TLT30D – 2022 – 3158 HOURS – DIESEL – TELESCOPIC MAST 4450 mm – FORK POSITIONER – FULL SERVICE – NEW TYRES – CONDITION 5/5 ### ✔ Used and new forklifts with quality guarantee – FT LOGISTICS Ready for operation. No compromises. This JCB TLT30D is not just a machine – it is the assurance that your logistics will run smoothly, reliably, and without downtime. The forklift has been fully overhauled, both technically and visually, and is in near-new condition, ready for immediate use. --- ### 🔧 Key technical specifications 📅 Year of manufacture: 2022 ⏱ Operating hours: 3158 hrs ⛽ Power: DIESEL 🏋️ Rated capacity: 3000 kg 🔩 Mast: Telescopic – 4450 mm 📏 Fork positioner: 1100 mm 📦 Fork length: 1500 mm Lrjdpozgwi Hefx Am Tsn 🛞 Tyres: Superelastic (100%) ✔ Technical condition: 5/5 – after major service, ready to work ✨ Visual condition: refurbished, no corrosion, like new 📐 Height: 2200 mm 📐 Length: 3200 mm 📐 Width: 1300 mm 📐 Construction height: 2200 mm 🛞 Tyres: Front 27x10-12 Rear 23x9-10 🚪 Fully heated cabin ⚖ Machine weight: 5200 kg 📦 Rated capacity: 3000 kg 📍 Load centre: 600 mm --- ### 🏢 FT LOGISTICS Quality we stand behind. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,478 h, load capacity: 3,000 kg, lifting height: 4,050 mm, load center: 600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,200 mm, motor manufacturer: PERKINS, gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,200 mm, fork width: 100 mm, fork thickness: 40 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 27X10-12, rear tire type: superelastic tires (black), rear tire size: 23X9-10, overall weight: 7,900 kg, empty load weight: 4,900 kg, total height: 2,200 mm, total length: 2,800 mm, total width: 13,000 mm, color: yellow, first registration: 08/2018, maximum load weight: 3,000 kg, axle configuration: 4x2, tire size: 27X10-12, number of seats: 1, chain condition: 100 %, drive condition: 100 %, Equipment: additional headlights, adjustable boom, cabin, head guard, hydraulics, pallet forks, standard shovel, JCB TLT30D – 2018 – 4478 MTH – DIESEL – TELESCOPIC MAST 4100 mm – FORK POSITIONER – NEW TYRES – CONDITION 5/5 Used and new forklifts with quality guarantee – FT LOGISTICS Ready to work. No compromises. ✅ This JCB TLT30D is not just a machine — it is the assurance that your logistics operations will run smoothly, reliably, and without downtime. Designed for demanding working conditions and after a complete technical and visual service, the machine looks like new and is ready for immediate operation. Key technical specifications 📅 Year of manufacture: 2018 Lrsdszgwitepfx Am Tjn ⏱ Operating hours: 4478 MTH ⛽ Engine: DIESEL ⚖ Capacity: 3000 kg 📏 Telescopic mast: 4100 mm 🔧 Fork positioner + forks 1200 mm 🛞 Tyres: Superelastic – 100% condition Dimensions 📐 Height: 2200 mm 📐 Length: 2800 mm 📐 Width: 1300 mm ⚖ Machine weight: 4900 kg 📍 Load centre: 600 mm Equipment ✔ Fork positioner ✔ Full heated cabin ✔ New superelastic tyres ✔ After full technical service ✔ Ready to work immediately ✔ Very good technical and visual condition Tyres specification: Front 27x10-12 Rear 23x9-10 This machine is an ideal solution for warehouses, logistics centers, industry, and material handling operations where reliability and precision are essential. FT LOGISTICS – Quality we stand behind. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 7,741 h, load capacity: 2,700 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,200 mm, motor manufacturer: KOHLER, gearing type: hydrostat, fork carriage width: 1,100 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 6,5-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 7,040 kg, empty load weight: 4,340 kg, total height: 2,200 mm, total length: 2,700 mm, total width: 1,200 mm, color: yellow, Equipment: CE marking, adjustable boom, cabin, front guard, lighting, pallet forks, retractable fork, seat heater, sideshift, trailer coupling, JCB TLT27D – 2019 – 7,741 hours – DIESEL – TELESCOPIC MAST 4,100 mm – FORK SIDESHIFT – FULLY SERVICED – NEW TYRES – CONDITION 5/5 ⚙️🚜 Used and new forklifts with quality guarantee – FT LOGISTICS ✔️ 🔧 Ready for operation. No compromises. The JCB TLT27D is engineered for demanding applications where reliability and efficiency are crucial. Following a complete technical and cosmetic overhaul, this forklift is in near-new condition and immediately ready for use. 🔹 Key Specifications: 📅 Year of manufacture: 2019 ⏱ Operating hours: 7,741 h ⛽ Engine: Diesel ⚖️ Rated capacity: 2,700 kg 📐 Telescopic mast: 4,100 mm ↔️ Fork positioner: 1,100 mm | Forks: 1,200 mm 🛞 Superelastic tyres (100%) 🚪 Fully enclosed heated cabin ⚙️ Service weight: 4,340 kg | 🎯 Load centre: 600 mm 🔧 Technical condition: 5/5 | ✨ Visual condition: as new 🏭 Ideally suited for: 🌲 Timber industry & sawmills Lredpfx Aezgwimom Ton 🏗 Steel & aluminium warehouses 🏕 Outdoor storage yards 🚛 Logistics & transshipment operations 🏭 Manufacturing 🏗 Construction & prefabrication FT LOGISTICS – Quality you can count on. Service you can trust. 🤝

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 3,446 h, load capacity: 3,000 kg, lifting height: 4,450 mm, load center: 600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,200 mm, motor manufacturer: KOHLER, gearing type: hydrostat, fork carriage width: 1,100 mm, fork length: 1,500 mm, fork width: 100 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 27X10-12, rear tire type: cushion tires (black), rear tire size: 23X9-10, overall weight: 8,200 kg, empty load weight: 5,200 kg, total height: 2,200 mm, total length: 3,200 mm, total width: 1,300 mm, color: yellow, Equipment: adjustable boom, cabin, fork extension, lighting, pallet forks, sideshift, ## 🚜 JCB TLT30D – 2022 – 3446 MTH – DIESEL – TELESCOPIC MAST 4450 mm – FORK POSITIONER – FULLY SERVICED – NEW TYRES – CONDITION 5/5 ### ✔ Used and new forklifts with a quality guarantee – FT LOGISTICS Ready for work. No compromises. This JCB TLT30D is not just a machine – it is the assurance that your logistics operations will run smoothly, reliably, and without downtime. Built for demanding working conditions, after a complete technical and visual overhaul, the machine looks like new and is ready for immediate use. --- ### 🔧 Key technical specifications 📅 Year of manufacture: 2022 ⏱ Operating hours: 3446 MTH ⛽ Engine: DIESEL 🏋️ Capacity: 3000 kg 🔩 Mast: Telescopic – 4450 mm 📏 Fork positioner: 1100 mm 📦 Fork length: 1500 mm 🛞 Tyres: Superelastic (100%) ✔ Technical condition: 5/5 – after major service, fully ready for use ✨ Visual condition: refurbished, no corrosion, like new 📐 Height: 2200 mm 📐 Length: 3200 mm 📐 Width: 1300 mm 📐 Construction height: 2200 mm 🛞 Tyres: Front: 27x10-12 Rear: 23x9-10 🚪 Fully heated cab ⚖ Machine weight: 5200 kg 📦 Capacity: 3000 kg 📍 Load centre: 600 mm Lredpfozgwigjx Am Tsn --- ### 🏢 FT LOGISTICS Quality we stand behind. Service you can trust.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic handler, rigid frame Load center: 500 Mast type: Telescopic Lsdpezgpbbjfx Am Tsrn Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 12 R Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12 R Rear tire condition: 80 - 100% Description: The MT 625 H telescopic handler is designed for use on construction sites for new builds and for renovation work on low-rise buildings. The compact machine, 1.80 m wide and less than 2 m high, easily passes through doors and can maneuver well on congested construction sites. Its turning radius of 3.30 m and the 3 available steering modes ensure excellent maneuverability. This telescopic handler is easy to operate and is equipped with an ergonomic dashboard and the JSM joystick, which guarantee easy maneuverability. The MT 625 H has a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 hp engine enables a speed of 25 km/h. Maintenance work is facilitated by the large opening of the engine hood. The 90-liter gear pump enables simultaneous movements of the boom and the telescope, thus increasing productivity. 3rd valve, full cab, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,300 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Rigid telehandler Load centre: 500 Mast type: telescopic Transmission: hydrostatic Speed class: 20 Condition: Refurbished without warranty Technical condition: normal Front tyre type: pneumatic Lrodpfx Amszgpa De Ten Front tyre condition: 80 - 100% Rear tyre type: pneumatic Rear tyre condition: 80 - 100% 3rd hydraulic valve, full cab, air conditioning,

Condition: used, Year of construction: 2023, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,300 mm, - Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp: Dreifach-Teleskop - Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig - Motornorm: Stage V / Stufe 4 - Nennleistung Verbrennungsmotor / Leistung (kW) 211 Hp / 155 kW Lsdpfxezglt Hj Am Tsrn - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with CVT - Getriebe Speedshift - Max. travel speed 40 km/h - Zugkraft 9300 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen: 29 % / 38.70 % - Pumpenart: Verstellpumpe - Hydraulikfördermenge: 185 l/min - Hydraulikdruck: 350 bar - Motoröl: 13 l - Hydrauliköl: 300 l - Fassungsvermögen des Kraftstofftanks: 320 l - Abgasnachbehandlung für Diesel (AdBlue®): 24 l - Geräuschpegel im Fahrerstand (LpA): 68 dB - Außenschallpegel (LwA): 109 dB - Vibrationswert an Händen/Armen: < 2.50 m/s² - Lenkräder (vorne / hinten): 2 / 2 - Steuerungen: 2 Joysticks - Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco): Standard

Condition: new, Year of construction: 2026, load capacity: 8,000 kg, lifting height: 34,900 mm, total length: 9,290 mm, Rotating forklift Magni RTH 8.35 Drive Diesel Year built 2026 Lifting height (mm) 34,900 Lifting weight (kg) 8,000 Lrsdpfx Amszgltyo Tsn

Condition: used, Year of construction: 2023, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,300 mm, Max. Tragkraft 7000 kg - höhe 24.80 m - Maximale seitliche Reichweite 20.50 m - Kippwinkel 12 ° - Schüttwinkel 110 ° - Drehung des Oberwagens 360 ° - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang Lsdpfx Aozglttsm Torn - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Motor Hersteller: Yanmar - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FTT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 173 Hp / 127 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - 12V Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 - Max. travel speed 40 km/h - Zugkraft 9200 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 32.40 % / 41.40 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 300 l - Fassungsvermögen des Kraftstofftanks 320 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 67 dB - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: used, Year of construction: 2017, operating hours: 3,379 h, load capacity: 5,000 kg, lifting height: 18,000 mm, fuel type: diesel, Equipment: cabin, Magni RTH 5.18 Smart rotating telescopic handler, manufactured in 2017, with radio remote control! ----* Manufacturer: Magni * Type: RTH 5.18 Smart * Year of manufacture: 2017 * Operating hours: approx. 3,379 * Last service at approx. 3,355 operating hours! * Including pallet forks * Including remote control (radio controlled!) * Load capacity: approx. 5,000 KG * Lifting height: approx. 18 meters * German machine, 1st owner Ledpfxjzf T Uco Am Torn * In good condition! * 100 KW * Deutz diesel engine * CE declaration and exemption permit available * Video available upon request * Price: 64,900 Euro, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information is without guarantee, errors and prior sale excepted.

Condition: new, functionality: fully functional, machine/vehicle number: HR15272, Year of construction: 2026, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 56 kW (76.14 HP), fork length: 1,200 mm, empty load weight: 4,800 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,810 mm, Telescopic handler, rigid frame Chassis number: HR15272 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire size: CAMSO SKS532 1216.5 145A2 Front tire condition: New Rear tire type: Pneumatic Rear tire size: CAMSO SKS532 1216.5 145A2 Rear tire condition: New Lsdpfx Amjzf Tfhj Torn Battery voltage: 12V Battery capacity: 110Ah Battery type: Starter Battery year of manufacture: 2026 Battery condition: New Description: Machine completely workshop-tested, UVV and inspection newly approved! Rear work light, front work light, compliant with German Road Traffic Licensing Regulations (STVZO), full cabin, CE certificate, interior mirror, exterior mirror, joystick, windshield wiper, LED, seat, Fork carriage with load guard (PFB), forks 125 x 45 x 1,200 mm (FEM 2), Camso SKS532 tires 12-16.5, interior rearview mirror, rear-mounted mirror, radio antenna, radio preparation, auxiliary hydraulics, deactivation of tilt function, LED work lights front and rear, sun visors on the roof and windshield, roof windshield wiper, high-performance starter battery 12V / 110 Ah / 900 A, power cable 95 mm², protection for lubrication points, Easy Link System, CE machine approval and ABE (German operating permit) for Germany, TÜV version (German technical inspection) 20 km/h.

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 3,600 h, load capacity: 4,000 kg, lifting height: 17,000 mm, gearing type: hydrostat, Equipment: all wheel drive, cabin, lighting, pallet forks, Fully functional telescopic handler. Lrjdpfozfwnmsx Am Ton

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 9,570 h, load capacity: 4,500 kg, lifting height: 21,000 mm, fuel type: diesel, power: 107 kW (145.48 HP), Equipment: all wheel drive, cabin, lighting, pallet forks, trailer coupling, Telescopic handler MERLO ROTO 45.21MCSS Year of manufacture: 2012 According to the meter reading: 9,570 hours 20.8 meters working height 4.5 tons lifting capacity 18 meters side reach Lrodpfx Ajzffmqjm Ton 40 km/h, 2-stage hydrostatic transmission 107 kW IVECO 6-cylinder engine 360-degree continuously rotating upper carriage - incl. winch! - incl. remote control - incl. crane hook - incl. forks - incl. all documentation - incl. road approval (Netherlands) - immediately ready for use, original condition! Selling price: EUR 54,900.00 net Affordable delivery also possible! For an additional charge, available with a new bucket or new work platform!

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,500 h, load capacity: 7,000 kg, lifting height: 24,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 130 kW (176.75 HP), fork length: 1,200 mm, empty load weight: 21,810 kg, total length: 7,820 mm, drive type: Diesel, construction width: 2,490 mm, Rotating Telescopic Handler Load center: 600 Mast type: Telescopic Transmission: Hydrostatic Technical condition: good Front tire type: Pneumatic Front tire size: 445 / 65 R22.5 Lredpfx Amezfbvus Tsn Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 445 / 65 R22.5 Rear tire condition: 80 - 100% Description: The MRT 2470 Privilege Plus is an all-terrain rotating telehandler, ideally suited for applications in construction and industry. This machine is a significant asset for your material handling needs. It combines three machines in one: telehandler, crane, and work platform. Its 360° rotation capability allows you to perform various tasks without having to reposition the machine. The boom features a pentagonal cross-section, providing very high precision during operation and maintaining lateral rigidity regardless of wear. This offers added safety for you and your team. Soon, you won’t want to be without this powerful, precise, and versatile machine. 3rd hydraulic valve, air conditioning, Remote control available on request with bucket or light material bucket (1000 or 1500 liters), large swivel man basket.

Condition: used, functionality: unexamined, Year of construction: 2019, operating hours: 2,356 h, load capacity: 3,200 kg, fuel type: diesel, construction height: 2,300 mm, empty load weight: 7,640 kg, total length: 4,710 mm, drive type: Diesel, construction width: 2,260 mm, Rigid telehandler Lrjdpfjzctk Hox Am Ten Technical condition: Normal

Condition: new, Year of construction: 2023, load capacity: 4,000 kg, lifting height: 13,530 mm, total length: 7,360 mm, - Max. Tragkraft 4000 kg - höhe 13.53 m - Maximale seitliche Reichweite 9.46 m - Ausbrechkraft mit Schaufel 7400 daN - Gesamtbreite der Kabine 0.89 m - Kippwinkel 12 ° - Schüttwinkel 114 ° - Wenderadius (über Räder) 3.94 m - Eigengewicht (mit Gabel) 10855 kg - Gewicht 10900 kg - Bereifung Pneumatisch - Reifenmodelle Alliance 400/80 - 24 - 162A8 - Gabeln Länge / Gabeln Breite / Gabelquerschnitt 1200 mm x 125 mm x 50 mm - Heben 16 s - Senken 12.40 s - Teleskop ausfahren 17.30 s - Teleskop Einfahren 13 s - Ankippen 4 s - Auskippen 4 s - Hersteller Deutz - Motornorm Stage V / Tier 4 final - Motor Modell TD 3.6 L - Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3621 cm³ - Nennleistung Verbrennungsmotor - Leistung 75 Hp / 55.40 kW - Max. Drehmoment / Motordrehzahl 340 Nm @ 1600 rpm - Zugkraft 8320 daN - Getriebetyp Drehmomentwandler - Anzahl der Gänge (vorwärts / rückwärts) 4 / 4 - Max. travel speed 24.90 km/h - Parkbremse Automatische Parkbremse - Festellbremse Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Pumpenart Zahnradpumpe - Hydraulikfördermenge / Hydraulikdruck 106 l/min-270 bar - Motoröl 7.50 l - Hydrauliköl 135 l - Fassungsvermögen des Kraftstofftanks 140 l - Geräuschpegel im Fahrerstand (LpA) 79 dB - Umgebungsgeräusch (LwA) 102 dB - Schwingungsbelastung Hand/Arm < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Antriebsräder (vorne / hinten) 2 / 2 - Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 2 Ljdpfxjzcra Hs Am Torn - Steuerungen JSM

Condition: used, Year of construction: 2012, operating hours: 1,971 h, 1 unit of JCB 535-125 telescopic handler The engine was completely overhauled and professionally repaired in 2024. Repair costs amounted to approximately €8,200 net. Since then, the machine has been operated for approximately 152 hours. Operating hours: 1971 h. Color: as shown in the pictures, please refer to the images and arrange for an inspection. Year of manufacture: 2012 Condition: used Location of the goods: outdoors Payment method: prepayment by bank transfer Shipping: self-collection only from the Coburg location Ledpfszclt Tsx Am Torn

Condition: used, functionality: fully functional, machine/vehicle number: 1900227, Year of construction: 2006, operating hours: 2,442 h, load capacity: 6,000 kg, lifting height: 2,500 mm, fuel type: diesel, construction height: 1,900 mm, power: 52 kW (70.70 HP), empty load weight: 4,800 kg, total length: 4,000 mm, drive type: Diesel, construction width: 1,850 mm, Telescopic handler, rigid frame Chassis number: 1900227 Condition: Ready for operation and fully functional Lsdpjzciqcofx Am Tjrn Technical condition: very good Front tire condition: 20 - 40% Rear tire condition: 20 - 40% Description: Dieci Apollo 190 -- 2.5m reach -- 6 ton lifting capacity -- Year of manufacture 2006 -- 2442 operating hours -- mechanical quick coupler -- 4-cylinder Yanmar diesel engine 52kW -- 4-wheel steering -- 4-wheel drive -- 3 steering modes -- 1-speed hydrostatic drive -- cab -- heating -- lighting system -- additional hydraulics up to the fork carriage, 3rd valve -- with used pallet fork -- front tires 30% -- rear tires 30% -- with new bucket for an extra charge of €1000 -- with used bucket (width: 1.90m) -- overall height: 1.92m -- width: 1.85m -- length 4m -- weight: approx. 5 tons -- good condition -- new starter installed 3rd valve, heating, full cab Cab -- heating -- lighting system

Condition: used, functionality: fully functional, machine/vehicle number: 585143, Year of construction: 2009, operating hours: 3,342 h, load capacity: 2,000 kg, lifting height: 6,000 mm, fuel type: diesel, construction height: 1,920 mm, power: 43 kW (58.46 HP), empty load weight: 5,000 kg, drive type: Diesel, construction width: 1,800 mm, Telescopic forklift, rigid frame Chassis number: 585143 Ljdpfx Aezcip Ssm Torn Condition: Ready for use and fully functional Technical condition: very good Front tire condition: 20 - 40% Rear tire condition: 20 - 40% Description: Manitou MT620 – 6m reach – 2-tonne lifting capacity – Year of manufacture 2009 – 3342 operating hours – mechanical quick coupler – 3-cylinder Perkins diesel engine, 43kW – 4-wheel steering – 4-wheel drive – 3 steering modes – cabin – heater – lighting system – auxiliary hydraulics up to the fork carriage, 3rd valve – with used pallet fork – front tires 20% – rear tires 20% – with new bucket available for an extra charge – overall height: 1.92m – width: 1.80m – weight: approx. 5 tonnes – good condition – all mechanical – very maneuverable 3rd valve, heater, Cabin – heater – lighting system

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,600 h, load capacity: 5,000 kg, lifting height: 20,600 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 110 kW (149.56 HP), fork length: 1,200 mm, empty load weight: 17,930 kg, total length: 6,780 mm, drive type: Diesel, construction width: 2,490 mm, Rotating Telescopic Handler Load Center: 500 Mast Type: Telescopic Transmission: Hydrostatic Ledpszchvksfx Am Tsrn Speed Category: 20 km/h Condition: Ready for operation and fully functional Technical Condition: Good Front Tyre Type: Pneumatic Front Tyre Condition: 80 - 100% Rear Tyre Type: Pneumatic Rear Tyre Condition: 80 - 100% Description: The MRT 2150 Privilege Plus is an all-terrain rotating telehandler, ideal for applications in construction and industry. This machine is a major asset for your material handling tasks. It functions as a telehandler, crane, and aerial work platform, thus combining three machines in one. Its 360° rotation capability enables you to perform various tasks without having to reposition the machine. The boom's pentagonal cross-section ensures exceptionally precise control. At the same time, it maintains lateral rigidity of the boom regardless of wear, providing added safety for you and your teams. You will soon find this powerful, precise, and versatile tool indispensable. 3rd valve, rear work lights, front work lights,

Condition: used, machine/vehicle number: 9486, Year of construction: 2013, operating hours: 3,694 h, load capacity: 3,800 kg, lifting height: 13,000 mm, overall weight: 9,100 kg, enginetype: Diesel, manufacturer: Merlo Lsdpezca Ewsfx Am Tern

Condition: good (used), machine/vehicle number: 5169190, Year of construction: 2016, operating hours: 1,287 h, load capacity: 2,500 kg, lifting height: 6,000 mm, construction height: 1,930 mm, overall weight: 5,200 kg, enginetype: Diesel, manufacturer: Merlo Ljdpfx Aszca Ekjm Tern

Condition: used, machine/vehicle number: 4484, Year of construction: 2013, operating hours: 3,923 h, load capacity: 4,000 kg, lifting height: 18,000 mm, overall weight: 13,900 kg, enginetype: Diesel, manufacturer: Merlo Lsdpfx Aezca D Hjm Tern