APT International nv

Condition: excellent (used), Year of construction: 2001, pressure 200 t chamfer lenght 4100 mm distance between columns 3150 mm stroke of upper beam 200 mm throat 300 mm dayligth 450 mm working feed 8.0 mm/sec return speed 80.0 mm/sec 265 bar Control BC GRAPHIC work height max. 965 mm total power requirement 18.7 kW weight 14.800 kg range L-W-H 4400 x 1900 x 3000 mm From a maintenance workshop In good/well-maintained condition (!!) Equipment: - CNC-controlled hydraulic press brake - Includes "ATLANTIC" CNC control system ("BC GRAPHIC") * Calculation of bending sequences * Positioning of the backgauge (X+R axes) Fgjdpfx As Aiv Efof Hoi * Positioning of the depth setting (Y1+Y2 axes) * Positioning of the gauge fingers (Z axis) * Capability to program various bending sequences * Visual representation of bending steps * Swiveling control panel (located at the front left) - CNC electro-hydraulic depth adjustment (Y1+Y2 axes) - CNC motorized backgauge (X axis) - CNC motorized adjustment of the gauge height (R axis) - CNC motorized adjustment of the gauge fingers (Z axes) - CNC motorized bed crowning (table crowning) - Upper tool clamping system – "AMADA/PROMECAM" * Includes 1x sectionalized set of upper tools - Lower tool clamping system – "AMADA/PROMECAM" * Includes 1x sectionalized set of 2V dies - Various additional bending tools - No side safety guards (hinged/swiveling doors) - Includes rear safety guard (sliding door) - 1x mobile two-hand/foot control unit - Operating manual (PDF)

Condition: good (used), functionality: fully functional, Year of construction: 2005, operating hours: 30,845 h, machine/vehicle number: 122, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, bending force (max.): 230 t, working width: 4,100 mm, stroke length: 400 mm, distance between stands: 4,200 mm, table height: 1,060 mm, oil tank capacity: 800 l, back gauge adjustment: CNC-controlled, back gauge: 600 mm, back gauge speed R-axis: 500 mm/s, overall weight: 21,800 kg, total length: 5,590 mm, total width: 2,257 mm, total height: 3,310 mm, power: 30 kW (40.79 HP), input voltage: 380 V, input current: 55 A, input frequency: 50 Hz, number of support arms: 2, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Hämmerle 3P-225 / 410 Fgodpfs Aiuh Ijx Af Hei The machine is in daily operation and functions perfectly. Maintenance is carried out periodically by the supplier, in accordance with the manufacturer’s specifications and checklists. Integrated lifting aid. Comes with numerous upper and lower tools.

Condition: good (used), functionality: fully functional, Year of construction: 1991, Safan CNCS 225-4300 – CNC press brake, 225 t / 4300 mm Technical specifications: Manufacturer: Safan (Holland) Model: CNCS 225-4300 Year of manufacture: 1991 Pressing force: 225 t (2,250 kN) Working / bending length: 4,300 mm Distance between side frames (throat): 3,550 mm Side frame clearance (throat depth): 400 mm Ram stroke: 200 mm Max. opening height: 460 mm Motor power: 15 kW (380 V) Fgodpfx Afe Aik Dho Hoi Machine weight: 15,700 kg Description and equipment: CNC control system on a swiveling ram Motorized back gauge (2 fingers) Upper intermediate adapters / punch holders The machine is in good condition, connected, and fully functional – demonstration possible under power.

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Fodpfs Aihyrsx Af Hsgi Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T

Condition: good (used), functionality: fully functional, Year of construction: 2006, Very well-maintained press brake from Safan. Type: H Brake 240 4100 Capacity: 4100 x 240 tons Equipped with Safan E Control with a dual screen Y1, Y2, X, and R axes CNC controlled 4 manual back gauge fingers Manual Wila New Standard top and bottom clamping Fgjdpfx Afe Ah Szpe Hoi Includes 1 set of tooling in the machine.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, machine/vehicle number: Bull30_4, working width: 3,100 mm, stroke length: 270 mm, distance between stands: 3,200 mm, reverse speed: 40 mm/s, travel distance X-axis: 600 mm, back gauge: 600 mm, back gauge speed R-axis: 100 mm/s, back gauge travel distance R-axis: 250 mm, back gauge travel distance Z-axis: 3,200 mm, overall weight: 16,000 kg, total length: 20,000 mm, total width: 40,100 mm, total height: 32,000 mm, warranty duration: 36 months, travel distance Y-axis: 270 mm, travel distance Z-axis: 3,200 mm, pressing force: 250 t, height adjustment type: electric, mount diameter: 3,100 mm, rapid traverse X-axis: 500 m/min, rapid traverse Y-axis: 40 m/min, space requirement height: 3,500 mm, space requirement length: 2,000 mm, space requirement width: 4,010 mm, table width: 3,200 mm, travel distance R-axis: 250 mm, working length: 3,100 mm, Equipment: CE marking, angle measuring system, angle stop, documentation/manual, emergency stop, european tool clamping system, finger protection, lower tooling, safety light barrier, upper tooling, Electric press brake Bull30 CoastOne Oy - Made in Finland Fgedpfx Aj Ah Siujf Hei Spindle drive - 5 controlled spindles Directly controlled crowning in the upper beam Pressing force: 2500kN Bending length: 3100mm Light barrier: Lazersafe IRIS Tool clamping: WILA hydraulic Backgauge: X-R-Z1-Z2 controlled Control: TC15-2D graphics control Front support arms, height adjustable and foldable Work light at the front and in the stop area Price and delivery time on request Further equipment options on request Warranty: 36 months after installation

Condition: good (used), Year of construction: 2003, Used Guifil press brake Type FCS 20 50 Capacity 2050 x 50 tons Delem DA65 CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC controlled Includes a complete set of tooling (not shown). Fodpfxs Ahwuwo Af Hegi

Condition: good (used), functionality: fully functional, Year of construction: 1995, CNC Hydraulic Press Brake Manufacturer: Darley Model: 100 3100 Year of manufacture: 1995 Control system: DR 23 Max. bending force: 100 tons Max. working width: 3100 mm Axes: Y1 and Y2, X1 and X2 Back gauge: 1500 mm Front gauge: 1300 mm SIK safety device Fodpe Ahwkkefx Af Hsgi Full-length tooling We can send a video via WhatsApp if we have a phone number.

Condition: used, Bending machine fixed price Fgodps Ahulyofx Af Hji loaded onto a truck

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, CNC Hydraulic Press Brake Manufacturer: EHT Model: EHPS 2030 Year of manufacture: 1995 Control system: Cybelec Max. working width: 3050 mm Clamping force: 200 tons Fede Ahm Ibepfx Af Hjgi Main motor: 18.5 kW Back gauge: 1000 mm Bending aid 2 Multi V dies 2 sets of split tools, 260 mm high Hydraulic crowning in the table

Condition: excellent (used), Year of construction: 2017, control type: CNC control, controller manufacturer: Cybelec ModEva 15T, bending force (max.): 300 t, distance between stands: 3,600 mm, travel distance X-axis: 1,000 mm, overall weight: 24,000 kg, total length: 4,600 mm, total width: 1,950 mm, total height: 3,000 mm, Equipment: documentation/manual, The YAWEI PBH-300/4100 is a heavy-duty CNC hydraulic press brake, designed for accurate and efficient bending of medium to heavy steel plates. With a pressing capacity of 300 tons and a bending length of 4,100 mm, this machine is ideal for professional industrial sheet metal fabrication. Premium Hydraulic Tool Clamping Equipped with WILA upper tool clamping and hydraulic lower tool clamping, allowing fast tool changes, reduced setup times and increased productivity. Particularly suitable for flexible production and frequent tooling changes. Suitable Industries & Applications Steel fabrication: Heavy plate bending, profiles and structural components. Machine manufacturing: Frames, brackets and industrial equipment. Sheet metal subcontractors: Small and medium production batches. Agricultural; construction equipment: Chassis and reinforced components. Transport trailer manufacturing: Large formed steel components. Shipbuilding: Heavy-duty industrial sheet metal applications. Max. bending length: 4100mm Distance between column: 3600mm Max. pressing force: 300T Beam stroke: 265mm Troth beam: 410mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 80mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 6 Power: 22kW Length: 4600mm Width: 1950mm Height: 3000mm Fsdpfj Agm N Rox Af Hegi Weight: 24000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1997, pressure 220 t chamfer lenght 4175 mm distance between columns 3760 mm column arm 410 mm dayligth 450 mm stroke 180 mm ajustment speed 100 mm/sec working feed 8.0 mm/sec return speed 75.0 mm/sec table width 180 mm table height 960 mm oil volume 190 l 0 295 bar controlled axis 5 Anzahl Number of working hours ca. 9.400 h total power requirement 15.0 KW weight of the machine ca. 16000 kg. range L-W-H 4810 x 2200 x 2990 mm Very good / well-maintained condition (!!) Only approx. 9.400 operating hours - Verified condition - Machine video - ?v=nDcOAjUtNi0 Equipment: - CNC electro-hydraulic press brake - Equipped with AMADA "OPERATEUR" CNC control - 5 controlled axes (Y1+Y2/X1+X2/R) Fgjdpfxs Afzu Uj Af Hei - Swiveling control panel (on the left) - CNC-controlled depth adjustment (Y-axis) - CNC-controlled backgauge adjustment (X-axis) - CNC-controlled vertical adjustment of the backgauge fingers (R-axis) * Pneumatic height adjustment for the backgauge fingers - 4x manually adjustable backgauge fingers - AMADA CNC bed crowning (compensation system) - AMADA upper tool clamping system with wedge-style crowning * Includes 1x set of segmented punch tools (30°) - AMADA 60-series lower tool holder * Includes 1x set of segmented die holders * Includes 1x set of segmented 2-V dies - Lateral safety guards (swiveling doors) - Rear safety guards (swiveling door + protective fencing) - CE-marked - 1x mobile two-hand control unit - 1x mobile foot pedal * Includes a handwheel for fine-tuning the ram penetration depth (Y1+Y2) - Machine documentation

Condition: used, Year of construction: 2014, pressure 170 t chamfer lenght 3050 mm distance between columns 2550 mm Fgodpfxj Advb He Af Hoi column arm 405 mm stroke of ram 400 mm distance between table / ram 320-720 mm feed down max. 220 mm/sec feed bending max. 10 mm/sec feed up max. 220 mm/sec connected load 27 kVA total power requirement 18,5 kW weight of the machine ca. 13.600 kg

Condition: used, functionality: fully functional, Year of construction: 2018, stroke length: 250 mm, overall weight: 17,500 kg, power: 26 kW (35.35 HP), input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, pressing force: 250 t, table length: 3,100 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, We are offering this used Bystronic Xpert Pro 250/3100 press brake, manufactured in 2018. Model: Xpert Pro 250/3100 Year of manufacture: 2018 Serial number: BY041049 Working length: 3100 mm Maximum pressing force: 2500 kN Maximum stroke: 250 mm Weight: 17500 kg Main motor power: 22 kW Total connected load: 26 kW Operating voltage: 3-phase 400 V AC Frequency: 50 Hz Control voltage: 24 V DC Rated current of the upstream fuse: 80 A Maximum pneumatic operating pressure: 8 bar Fgodo Adt S Nepfx Af Hoi Maximum hydraulic operating pressure: 310 bar Self-assembly and ex works. If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1999, Used conventional press brake from Ermaksan Type AP 3600 200 Capacity 3600 x 200 tons NC control with adjustable back gauge and stroke Includes a set of tools as shown in the picture. Fgjdpo Adpq Iefx Af Hji

Condition: used, USED Ursvikens 4.1m x 200 Ton, Cybelec ModEva 12S Control, Year 1999, Complete with Tooling Ram & Depth Axes Fgedpfj Act Egex Af Hei Y1 & Y2: Control of the vertical descent and depth of the left and right hydraulic cylinders. Backgauge Horizontal Axes (Depth) X1: Control the horizontal forward and backward movement of the left and right backgauge fingers. Backgauge Vertical Axes (Height) R1: Controls the vertical up-and-down height adjustment of the backgauge finger. Backgauge Lateral Axes (Left-to-Right) Z1 & Z2: Control the independent lateral positioning (left-to-right movement along the beam) of the backgauge fingers. VDT (Variable Die Tool): The VDT is the CNC controlled axis that automatically adjusts the opening width (the V-opening) of the lower die. MAF (Manual Adjustable Finger): Manual adjustable backgauge finger (forward and back movement) on Z2 Axis. Ursviken Optima 200 CNC Press Brake - 200 Ton x 4100mm Ram & Depth Axes Quality Swedish-built Ursviken Optima 200 CNC hydraulic press brake with 200 tonne bending capacity and 4100mm bending length. Designed for demanding fabrication environments, Ursviken press brakes are renowned worldwide for their robust construction, precision bending performance and long service life. Suitable for a wide range of sheet metal and fabrication applications, including structural steelwork, architectural metalwork, agricultural equipment, machinery manufacture and general engineering. The machine combines substantial pressing force with a generous working length, making it ideal for both heavy-duty and high-accuracy bending operations. Ursviken's reputation for reliability and engineering excellence has made the Optima series a popular choice amongst fabrication companies seeking dependable, high-capacity bending equipment. Available for inspection under power at Bowland Trading Ltd. Key Features 200 Tonne Capacity 4100mm Bending Length CNC Control Hydraulic Operation Heavy-Duty Fabrication Capability Swedish Manufactured Machine Suitable for Sheet Metal & Structural Fabrication

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, pressing force: 230 t, Equipment: CE marking, documentation/manual, safety light barrier, Darley hydraulic press brake, 230 tons x 6200 mm, CNC control Delem DA65W Y1/Y2/X/R + crowning + laser safety system. Machine in good condition, with annual maintenance performed by Darley. Fedpfe Abalwsx Af Hogi

Condition: excellent (used), Year of construction: 1999, stroke length: 3,060 mm, throat depth: 410 mm, operating speed: 11 mm/s, reverse speed: 135 mm/s, overall weight: 18,209 kg, total length: 2,310 mm, total width: 3,660 mm, total height: 3,095 mm, power: 30 kW (40.79 HP), pressing force: 230 t, clearance between the columns: 2,690 mm, table width: 200 mm, CNC Crowning Hydraulic MODUFIX Tool clamping Hydraulic lower tool clamping Fsdpfj Aa It Tex Af Hegi CNC Finger Backgauge Z1 and Z2 6 Axis backgauge X1/X2, R1/R2 and Z1/Z2 Network card BNC-with RJ-45 Connector ToPs 600 Software Set Tooling  Max. bending length: 3060mm Distance between column: 2690mm Max. pressing force: 230T Dis. Beam - Table: 535mm Beam stroke: 365mm Table Width: 200mm Troth beam: 410mm Approch speed: 200mm/min. Working speed: 11mm/min. Return speed: 135mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 9 Crowning: yes Hydraulic toolclamping: yes Power: 30kW Length: 2310mm Width: 3660mm Height: 3095mm Weight: 18209kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 35,295 h, bending force (max.): 230 t, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Fjdsz Rmabspfx Af Hogi Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Condition: good (used), functionality: fully functional, Year of construction: 2015, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes Fgedpfx Afsz Rl Nhs Hoi - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: good (used), Year of construction: 1991, Used Darley press brake Fsdpfxjz N Exgs Af Hjgi Type EHP 50 20 15 Capacity 2050 x 50 tons Delem control system Y1, Y2, and X-axis CNC Includes a set of tooling

Condition: good (used), functionality: fully functional, Year of construction: 1992, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Fgjdpfsz I N Hwjx Af Hji Control system: LVD MNC 95 Total power consumption: 14 kW Machine weight (approx.): 7,700 kg

Condition: good (used), pressing force: 200 t, ram plate length: 3,100 mm, HAMMERLE 200-ton 3m CNC Press Brake Press Brake, Edge Bending Machine Brand: HAMMERLE Pressing force: 200 tons Bending length: 3100 mm Fgsdpfxjz Iuaij Af Hji CNC control: CYBELEC DNC 90 Control axes: Y1, Y2, X, R, Z1, Z2, V, which means: Y1, Y2: left and right frame X: back gauge, front/rear R: upper/lower back gauge Z1, Z2: left/right finger V: table compensation Pneumatic supports for sheet metal to the back gauge Numerical and graphical 2D element drawing 1 set of tools included with the machine, plus all items visible in the photo in the toolbox Machine documentation: diagrams and operating instructions

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, stroke length: 365 mm, pressing force: 250 t, table length: 4,100 mm, Equipment: CE marking, safety light barrier, 1 used Edwards Pearson PR 250 Ton x 4 Metre (often listed as the 250/4100 model) is a heavy-duty, multi-axis CNC hydraulic press brake for sale - highly regarded in the metal fabrication industry for its robust build and longevity. Below is an overview of the technical specifications, variants, and common configurations for this machine based on historical industrial data and machinery listings: ⚙️ Core Technical Specifications • Bending Capacity: 250 Tonnes (Metric) • Max. Bend Length: 4100 mm (4.1 Metres) Year 2002 Fgjdpez Iqmrefx Af Hoi • Foundation: Free-standing design 🛠️ Common Variants & CNC Controls Configured as a 6 axis machine featuring a 4 axis back gauge (X, R, Z1, Z2,) paired with a Cybelec DNC 1200 control unit. • Features hydraulic crowning system to keep bends precise across the full 4-metre span.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: P784, stroke length: 315 mm, throat depth: 305 mm, operating speed: 180 mm/s, reverse speed: 150 mm/s, oil tank capacity: 350 l, overall weight: 20,000 kg, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 230 t, clearance between the columns: 2,600 mm, distance table to ram: 500 mm, table length: 3,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, The all-rounder with extra power! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the construction of the control cabinet, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to perform bending operations at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, coupled with user-friendly operation, allows us to meet the highest requirements and achieve maximum precision in the bending process. Press force: 2,300 kN (230 t) Working length: 3,100 mm Clearance between uprights: 2,600 mm Installation height: 450 mm Overhang: 305 mm Ram stroke: 265 mm Height of lower bed above floor: 850 mm Rapid traverse max.: 200 mm/s Pressing speed max.: 9.8 mm/s Retraction speed max.: 150 mm/s Positioning accuracy of ram: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 18.5 kW Hydraulic oil tank capacity: 290 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 17.5 t Description: > Machine body Steel S 355 N, design based on FEM analysis Side stands with two pressure cylinders, above-floor 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper beam Proportional control valve, electronically monitored cylinder synchronization Double upper beam guide, Heidenhain scales Separate Y1/Y2 control, inclination monitoring Fsdpfxsz Hnzke Af Hegi > Tooling Top: WILA hydraulic, NSCL-II-HC Bottom: narrow table, single V (13 × 20) 2 aluminum support arms at the front, approx. 600 mm, height-adjustable > Crowning Centrally adjustable, hydraulically-dynamically, CNC-controlled Active control loop keeps the lower bed in the zero position Constant bending angle > Back gauge 4 axes X-axis 1,100 mm, 400 mm/s, ± 0.01 mm R-axis 200 mm, 200 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger distance min. 50 mm > Control Delem DA 66S 24″ touchscreen on the swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency CE compliant, Pilz safety PLC TFS laser light curtain, rear light curtain eco-MODE start-stop automatic > Additional equipment Air conditioning in the control cabinet LED work area lighting at the rear Remote diagnostics for Delem control and Pilz PLC