AHM GmbH

Condition: used, Year of construction: 2007, voltage 400 V current capacity 800 VA frequency 50 Hz weight of the machine ca. ca. 355 kg In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Godpfxoxwdxco Ah Sjkd Changes and errors in the technical data and information as well Subject to prior sale!

Condition: like new (used), operating hours: 5 h, functionality: fully functional, machine/vehicle number: 4394, type of input current: AC, throat depth: 165 mm, overall weight: 85 kg, total height: 700 mm, total width: 212 mm, total length: 510 mm, input voltage: 230 V, measuring range Z-axis: 170 mm, Equipment: type plate available, Motorized Rockwell Hardness Tester Matchling HR-150DT Measuring Scales: HRC / HRB Measuring Ranges: HRB: 20-100, HRC: 20-70 Indenter: Diamond cone 120° Indenter: Ball, Ø 1.5875 mm Preload: 98.07 N ± 2% Total Test Loads: 588.4 N ± 1% / 980.7 N ± 1% / 1471 N ± 1% Measurement Motor-Driven Dwell time of test force adjustable from 1 to 30 seconds Maximum Specimen Height: 170 mm Distance Between Column Stand and Indenter Axis: 165 mm Electrical Connection: 220 V Weight: 85 kg Dimensions: 510 x 212 x 700 mm (L x W x H) Accessories: - Test anvil, Ø 60 mm - Test anvil, Ø 150 mm - V-block test anvil Gkjdsxuni Tjpfx Ah Sjd - 4 calibrated reference blocks: 93.9 HRB / 25.6 HRC / 56.3 HRC / 64.1 HRC - Operating instructions in German and English The measurement process is very straightforward. After applying the initial preload, the total test load is applied automatically via the motor. Once the adjustable dwell time has elapsed, the value can be read off the scale. The motorized operation nearly eliminates measurement errors. Each measurement takes less than one minute. A hole beneath the measuring axis is required in the table top. The cabinet shown in the photo can be included free of charge, but this will result in increased transport costs. The machine is operational and can be demonstrated and tested under power.

Condition: ready for operation (used), Reicherter Briro VA I Hardness Tester Rockwell Hardness Tester 50 – 100 kgf, 62.5 – 187.5 kgf, 100 – 250 kgf You are welcome to come for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are reserved. Gsdpfx Aexp Dbbsh Sskd

Condition: good (used), Year of construction: 2012, ITW BÜHLER WILSON HARDNESS TESTER SuperRockwell Hardness Testing Device BRIRO RK-Automatic Year of manufacture: 2012 Test height: 0-235 mm Throat depth: 145 mm with HM-Control evaluation system with RS-232 data interface for data transfer with settings for HR15N; HR30N; HR45N; HR15T; HR30T; HR45T Gkjdpfx Ajxnpvzsh Ssd used Weight: 150 kg

Condition: used, Manufacturer: Wolpert Godpfxexcu Rae Ah Sskd Type: 751 N

Condition: used, Portable hardness tester IMPACT with integrated impact device Type: TH-130 Hardness testing methods: Rockwell, Vickers, Brinell, Shore Minimum specimen thickness: 3mm with support Battery operation up to 8 hours Gkedpfx Ahsxciwuj Sod Printer connection - usable in all positions, including overhead - precise and reliable hardness measurement according to ASTM A956 - Dynamic, fast hardness testing method with direct hardness value display on the screen - Charger - Operating instructions The handheld device displays hardness values in all common scales such as HRC, HRB, HV, HB, and HS.

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) Gksdsw S Hvzjpfx Ah Sed - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Condition: used, Mecmesin Ultra Test Universal Testing Machine + AFG 100N Force Gauge (Max Load 1000N) Description: For sale is a Mecmesin Ultra Test Universal Testing Machine with a maximum test force of 1000 N (≈ 100 kgf). The scope of delivery includes a Mecmesin AFG 100N (Advanced Force Gauge), which serves as the force measurement module and display unit. The system is suitable for a wide range of tensile and compression tests in the fields of plastics, packaging, food products (e.g. dough), textiles, electronics, and adhesive testing. Technical specifications (Ultra Test): - Maximum test force: 1000 N - Test methods: tensile and compression tests Gksdpsw Svtiefx Ah Ssd - Motorized test stand, adjustable speed - Typical travel: approx. 500–1000 mm - Positioning accuracy: ±0.1 mm - Control directly via the AFG Technical specifications (AFG 100N): - Measuring range: up to 100 N (≈ 10 kgf) - Resolution: 0.01 N - Accuracy: ± 0.1% of the measured value - Measurement types: tension and compression force - Peak-hold function, live display - Interfaces: RS-232 / USB (depending on model) Condition: used Scope of delivery: (See picture) (Specifications may be subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 1995, diameter 300 mm workpiece length 600 mm Rated capacity 2,8 KA Gsdpfew D Hi Hex Ah Sskd total power requirement 22 KVA weight of the machine ca. 1 t dimensions of the machine ca. 3 x1,6 x 1,8 m Tiede Super Light 400 W.

Condition: used, Year of construction: 1985, rockwell hardness s. Fotos brinell hardness s. Fotos weight ca. 350 kg universal Hardness tester Rockwell, Brinell, Vickers Godpfjwugrijx Ah Sjkd with drawer cabinet accessories as seen in photos all technical data without guarantee

Condition: used, Year of construction: 1962, rockwell hardness . brinell hardness . Hardness tester Rockwell measurement Gkedpfx Ahjwugq Se Ssd with underframe table all technical data without guarantee

Condition: used, Year of construction: 1957, brinell hardness 250 kg rockwell hardness 150 kg throat 130 mm checking height 300 mm Gkjdpeu T R Tksfx Ah Ssd weight of the machine ca. 0,150 t dimensions of the machine ca. 650 x 530 x 1550 m Tests possible by system Rockwell, Vickers, Brinell. This device is a used one. Therefore we sell it without warranty.

Condition: good (used), Year of construction: 1972, hardness tester, hardness measuring machine, hardness tester, hardness tester, universal hardness testing machine -Manufacturer: Wolpert -Type: Dia Testor 2 Rc -Remark: Hardness tester according to Brinell/vickers and Rockwell with base cabinet -Type: Dia Testor 2 Rc -Accessories: as per photos -Dimensions total: 845/780/H1780 mm Gkjdpfx Aeu Hbadsh Sod -Weight: 318 kg

Condition: used, Year of construction: 1978, hardness tester, hardness measuring machine, hardness tester, hardness tester, universal hardness testing machine -Manufacturer: Reicherter, hardness tester according to Brinell/Vickers and Rockwell on solid base -Type: Briviskop BVR 187.5 H -Projection: 250 mm -Test height: 280 mm -Accessories: see photos Gjdpfsu Ha U Tox Ah Sekd -Total dimensions: 1200/700/H1730 mm -Weight: 256 kg

Condition: used, brinell hardness 250 kg rockwell hardness 150 kg throat 125 mm workpiece height max. 200 mm weight of the machine ca. 70 kg dimensions of the machine ca. 400 x 200 x 700 mm Gedpfx Ahsuvd Hdo Sjkd Test load: 62,5 / 100 / 150 / 187,5 / 250 nell Dto. 100 und 150 kg Rockwell. Device untested because we are not familiar with it. Machine dealer with own stock of 1600 m².

Condition: used, functionality: unexamined, Test height 320 mm Projection 150 mm Gkodpfxouihh Ro Ah Ssd

Condition: used, TECHNICAL DETAILS Gedpfx Ahjuhb I Ij Sskd - Durometer for production line control of soft rubber and elastomers and all natural rubber products.

Condition: used, TECHNICAL DETAILS - Brinell tests 3000 Kg and 750 Kg, HB according to DIN EN ISO 6506-01 - Test height with table : 0 - 610 [mm] - Test height without table : 370 - 1.120 [mm] - Clamping surface on table : 500 x 600 [mm] - Clamping surface on sole : 810 x 1.425 [mm] - Reach : 310 - 1.095 [mm] - Arm swiveling : 220 [°] - Test group swiveling around its axis : 180 [°] - Vertical stroke of the test group : 750 [mm] - Floor space (except hydraulic unit) : 810 x 2.155 [mm] - Height : 3.500 [mm] - Weight : 4.000 [kg] - Voltage : 3x 400 [V] - Frequency : 50/60 [Hz] - Installed power : 3,5 [kVA] EQUIPMENT Gjdpfxjuhb Iuj Ah Sskd - Control panel : Stiefelmayer - Optical measuring system : Zeiss - Measuring electronics HM-Control - 2 measuring rules of imprint size : Heidenhain - Warning lights : good / outside the tolerance range - Statistic function - Exit for PV printing - Table - Hydraulic unit

Condition: used, Year of construction: 1954, brinell hardness 250 kg rockwell hardness 150 kg throat 125 mm checking height 200 mm weight of the machine ca. 0,07 t dimensions of the machine ca. 650 x 530 x 1550 m Gksdpfx Ahst Smlbs Sjd Tests possible by system Rockwell, Vickers, Brinell. This device is a used one. Therefore we sell it without warranty.

Condition: used, Year of construction: 1978, diameter 0 mm workpiece length 0 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Crack testing device for large series of workpieces Godpet Hwpgjfx Ah Sekd

Condition: used, Stationary hardness testing machine Hardness tester The hardness tester can be used manually with a template. The device is compatible with software, for data protection reasons the hard disk with software has been removed. Device is sold without software. Retrofit hardness tester Briviskop BL 3: HMEWin-Compact consisting of : 3.900,00 € -Pc with integrated touch screen -HMEWin-Touch Basis software - Hub with 12-pin connection for measuring system -Complete support system for the machine stand. Working time for retrofitting, commissioning, € 1,100.00 Calibration and instruction of employees approx. For more technical data, see type plate. You are welcome to come by for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Gkedpfx Aorfwynoh Sod Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 1986, condition: used, machine/vehicle number: 80.000.-978, Version A, size 1 Test force: 750 kN Type of force effect: spring load kN pre-force: max.300 kN Projection: 200 mm Test height: 14 mm Gkodpol Axc Usfx Ah Ssd Voltage: 380/220 V Type of current: 50 Hz Accessories and special equipment: - Brinell-Vickers hardness measuring electronics type 2.802.007 - Glare shield for ground-glass device Space requirement: 360 x 840 x 1250 mm Weight approx. 620 kg

Year of construction: 1982, condition: used, machine/vehicle number: 1.001.001-052, Type of force effect: Spring force load Initial force: 98 kN Projection: 150 mm Test height: 250 mm Test force: 588 N, 613 N, 980 N,1471 N, 2450 N Voltage: 220 V Type of power: 50 Per Accessories and special equipment: - Holder with diamond cone 120 degrees - Hardness comparison plate HRC Gkjdpfx Aol Axb Tsh Sed - Holder with carbide ball 2.5 mm diameter - Hardness comparison plate HR 2.5/187.5 - Test table 190 mm diameter - prism. Test table for max. 85 mm diameter - Protective cover - Machine table with drawer Required space: 460 x 210 x 840 mm Weight: approx. 100 kg

Condition: used, Hardness tester, hardness measuring machine, hardness tester, hardness tester, impact hardness tester, hardness comparison plate, test block, calibration and adjustment plate -Manufacturer: SiB, hardness reference block test block -Type: 199HBW 5/750 Gkodpfx Aok Egkweh Sod -Dimension box: 180/170/H35 mm -Weight: 1.4 kg

Condition: used, Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm bar material stranggepreßte NE-Stangen weight of the machine ca. 3 t Bending and breaking device simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods +++++ Gedoit Ev Topfx Ah Sskd Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++