Pasta-Noris

Year of construction: 2025, operating hours: 150 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 103, This is prototype of the 570 series model, it has been completely refurbished. It has 96 trays at 60x40 cm and full temperature control on each tray. It has an extraction capacity of 25kg/hr. The machine will be delivered and mounted on location including one week of introduction by out technician. Cgedpfxjyut Hxs Abwer

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ Codpeyg H Dzjfx Abwjgr 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2021, operating hours: 987 h, condition: excellent (used), functionality: fully functional, HARTER Drymex® M3 Sludge Drying System incl. 2 Stainless Steel Containers For sale is a HARTER Drymex® M3 (M-Line) containerized drying system for the efficient drying of aeratable sludges/substrates (e.g., sewage sludge, organic substrates). The system operates with a closed air circuit and heat pump dehumidification—low-odor due to the sealed air cycle and energy-efficient during operation. The machine is in perfect working order and has only 987 operating hours. Purchased in 2021. Original price: €47,000 (net). Highlights - Only 987 operating hours - Fully functional, ready for immediate use - Closed air circulation (low-odor/energy-efficient) - Automated drying process with humidity-controlled shutoff Csdpjygwy Hofx Abwsgr - Includes 2x M3 stainless steel sludge containers with tipping mechanism Technical Data (Drymex® M3 – Standard) - External dimensions (W x D x H): approx. 1300 x 1300 x 2000 mm - Weight (without containers): approx. 400 kg - Air recirculation capacity: 2,000 m³/h - Rated power: approx. 4.3 kW - Electrical connection: 230/400 V, 50 Hz - Dehumidification capacity: approx. 275 kg/24 h (material-dependent) - Ambient temperature: 10–35 °C Containers (M3) - 2 units, stainless steel - Usable volume per container: 0.5 m³ - Dimensions per container (W x D x H): approx. 1000 x 1040 x 1000 mm - Weight per container: approx. 180 kg - Discharge via integrated tipping gear, front hatch opens automatically Condition / Location - Condition: used, very good condition, fully functional - Operating hours: 987 hours - Purchased: 2021 - Location: Marburg - Inspection available by appointment

Year of construction: 2015, operating hours: 8,286 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: Drymex S 5, Beautiful, robust drying system consisting of 2 units, 1 large stainless steel drying chamber with perforated floor, including piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food products (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), permitted for indoor use only. The individual segments of the perforated floor can be lifted up separately for cleaning. Excellent condition, very solid construction. Dimensions: Units – 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301. Unit 1: Year of manufacture 2012, Unit 2: Year of manufacture 2014, Drying chamber: Year of manufacture 2015. Price negotiable. Codpfx Abeyffqqowsgr

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, SPX Flow Spraydrier - we have been using it for drying fresh water algae into powder. The machine is fully functional and working well. Cjdpfxsxv A I He Abwogr

Operating hours: 20 h, condition: excellent (used), functionality: fully functional, Operates with liquefied gas, suitable for roasting nuts, fruits, vegetables, etc. Capacity: hazelnuts 150 - 175 kg/h, peanuts 125 - 150 kg/h, almonds 140 - 160 kg/h, sunflower seeds 75 - 85 kg/h. Features 2 roasting and 1 cooling sections. Belt brush cleaning system. Constructed in stainless steel. Includes dragée drum for salting, type TZM-100 mini, capacity 60 L, stainless steel, with filling unit, low operating hours. Cgedpexl Ttxefx Abwer

Year of construction: 2023, condition: ready for operation (used), A new belt roasting machine for nuts in the food industry is available. Fuel: diesel/electricity/gas/LPG, output: 2kW, machine dimensions X/Y/Z: approx. 3600mm/1900mm/1950mm, operating hours: 31h. Roasting capacity per hour: hazelnut kernels: 160kg, shelled peanuts: 150kg, shelled peanuts: 35kg, shelled pistachios: 90kg, sunflower seeds: 70kg, pumpkin seeds: 70kg, almonds: 120kg, cashew nuts: 150kg, chickpeas: 120kg. Including salt kettle with a capacity of 35kg and fully automatic high-pressure belt washer. Documentation available. On-site inspection is possible. Cgodpfx Abou Ei Utjwjr

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, Equipment: CE marking, Our client in Vilnius, Lithuania currently offers 7 complete sets of drying trolleys with trays available from stock. Can be sent one set at a time. Full manufacturer warranty is provided by HySpriz. This is an ideal trolley solution for drying products such as jerky, kabanos, fish snacks, and pet sticks. It is also suitable for fish defrosting processes and even baking applications. The mesh structure ensures excellent air convection through all product levels, resulting in uniform drying and stable product quality. We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with RK50U, SAS200, and FARS200 systems and is ideal for use in drying chambers, smokehouses, and climate-controlled environments with air dehumidification. Cjdjrftxfepfx Abwjgr The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is made of corrosion-resistant AISI 304 stainless steel using a robust 40 × 40 × 1.3 mm profile. It includes 30 levels with a 55 mm spacing between tiers and special locking systems to prevent trays from falling during movement. For mobility, the trolley is equipped with six heavy-duty pendulum swivel casters (Ø125 mm), allowing full rotation even when loaded. Each trolley includes 60 stainless steel trays sized 900 × 500 mm. The trays are made of corrugated stainless steel mesh, 5x5 mm. can be optionally equipped with Teflon liners (5,8 EUR/pcs) Wire thickness is 0.7 mm for high rigidity. Each tray has a 15 mm perimeter rim for improved airflow and heat distribution. Reusable non-stick Teflon inserts are included, ideal for sticky or soft products. Total load capacity is up to 400 kg per trolley, with up to 7 kg per tray. The system supports both low-temperature dehydration and high-temperature processing. Compatible with chambers using horizontal or vertical airflow. Designed for easy cleaning, hygiene, and long service life. This trolley ensures efficient moisture removal and uniform air distribution, which directly improves drying performance and final product shelf life.

Year of construction: 2021, condition: like new (used), For sale Food Dryer - Dehumidifier. Used a few times. Max. indoor temperature: 60 degrees Celsius. Flow rate: 4500 m3/h Shell for products: 25 psc. Power required: 220V 50Hz More parameters in photos. If you have an questions on this, please do not hesitate to contact us. Cedpfxsibwb Ts Abwogr

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ Cgedpfsfz I Rxsx Abwer 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Cgsdpofzccnefx Abwer Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Cgsdpfx Abjfzb Niewer Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ Cgodpefzb Nbjfx Abwer 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡