tbs-pack GmbH

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Cjdpfx Aszy Hu Eogterg

Condition: used, fuel type: diesel, Year of construction: 2013, PEUGEOT BIPPER, 2013, 1.3MJT engine, 290,000 km, air conditioning. Vehicle in good condition. Credpezy Hursfx Agtog

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Crsdpfx Aszy Hulsgteg With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: refurbished (used), Dry cleaner/ Friction cleaner Credezy Hufopfx Agtog with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness

Condition: reconditioned (used), functionality: fully functional, Drive power: 55-90 kW depending on the required performance and task Codpfx Ajzy Ht Usgtsrg Application: Drying and cleaning of hard plastics, PET flakes, films Output: 800-2500 kg/h depending on the input material

Condition: new, Impact clearing needle (28697a) 8 mm, Class III Crjdpezy Htzefx Agtjg Manufacturer: Hassan Savage, Type: EDP 11308 unused

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Csdpfx Agezy Htuetorg Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available.

Condition: used, kW: 30 Rotor diameter: 500 mm Cjdpfx Agezy Hthotsrg Rotor width: 1200 mm

Condition: refurbished (used), Dry cleaner/ Friction cleaner Codpfozy Htbjx Agtsrg with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter Csdszy Hrqepfx Agtorg • electrical control unit • compressor.

Condition: excellent (used), Spacer pins Manufacturer: Hassay Savage / Preci Tool Slot width: 3-4-5-8-12 mm Includes guide bushings and inserts. Csdpfx Agezy Hrdstorg

Condition: used, Manufacturer CONDUX Model CS 450/600-2 Hollow body granulator and secondary granulator for pre-shredded material Rotor: 450 mm diameter x 600 mm working width 5 rotor blades (angled cut), 2 stator blades Drive motor 22 kW Crsdpszy Hq Tefx Agtjg

Condition: used, mileage: 903,547 km, power: 375 kW (509.86 HP), first registration: 01/2017, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, spoiler, = Additional Options and Accessories = - Roof spoiler - Spare key - Speed limiter - Hydraulic tipping kit - Aluminum fuel tank - Alloy wheels - Side sills - Stability control - Standard air conditioning - Sun visor - Alternating current - Toolbox = Further Information = Tire size: 315/80 R22.5 Brakes: Disc brakes Csdjzy Hqyspfx Agtjrg Front axle: Alloy wheels; Steered; Tire tread depth left: 9 mm; Tire tread depth right: 7 mm; Suspension: Leaf spring suspension Rear axle: Twin tires; Alloy wheels; Tire tread depth left (inner): 10 mm; Tire tread depth left (outer): 7 mm; Tire tread depth right (inner): 8 mm; Tire tread depth right (outer): 6 mm; Suspension: Air suspension Damage: None

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables Crjdpfozy Hqtex Agtog With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, HERBOLD PU800 pulverizers Suitable for soft to medium-hard materials Used so far for fine grinding of plastics Diameter of grinding disks: 800 mm Codpfxszy Hqgj Agtjrg Drive motor: 90 kw

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,800 mm, number of axes: 3, This 3-axis EXPERT SYSTEMTECHNIK cutExpert variojet was manufactured in 2016. It features a maximum material thickness capacity of 100 mm, allowing for versatile cutting applications. The machine includes an Uhde HPS 4022 high-pressure pump, designed for a discharge capacity of 2.3 l/min and a pressure of 4000 bar, enhancing its cutting efficiency. If you are looking to get high-quality waterjet cutting capabilities, consider the EXPERT SYSTEMTECHNIK cutExpert variojet machine we have for sale. Contact us for further details. Cjdpfx Aezy Hqajgterg - Maximum Material Thickness: 100 mm (via adjustable Z-axis)- Operating Hours: 30,192 hours- Included Additional Equipment: Uhde HPS 4022 high-pressure pump, second worktable for continuous loading/cutting workflowHigh-Pressure Pump Specs (Uhde HPS 4022):- Pump Manufacturer: Uhde High Pressure Technologies GmbH (ThyssenKrupp)- Pump Model: HPS 4022- Design Discharge Capacity: 2.3 l/min- Design Pressure: 4000 bar- Plunger Diameter: 19 mm- Stroke Length: 182 mm- Motor Rated Output: 22 kW- Pump Weight: 1080 kg- Pump Operating Hours: 30,192 hours

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Crjdszy Hp Nspfx Agtog Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Year of construction: 1993, machine/vehicle number: H 3391, power: 7 kW (9.52 HP), equipped with 1 four-roll feed unit - Wegoma, Vario 3 Information: small motor not functioning large motor, 7 kW, is running Credpszy Hp Aefx Agtog

Condition: excellent (used), mileage: 74,480 km, power: 323 kW (439.16 HP), first registration: 11/2018, fuel type: diesel, axle configuration: 6x2, wheelbase: 5,950 mm, fuel: diesel, fuel tank capacity: 600 l, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 10,300 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 7,750 mm, loading space width: 2,550 mm, loading space height: 1,080 mm, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, power assisted steering, power mirror, traction control, trailer coupling, - Aluminum fuel tank - Rear work lights - Front work lights - Brake booster - DAB radio - Differential lock - High beam headlights - Windshield - Low noise - Speed limiter - Cab - Air conditioning - Alloy wheels - Air suspension - Air-suspended seats - Air horn - Media system - PTO - Rotating beacon - Sleeper cab - Sun visor - Toolbox - Central lubrication system - Tow hitch Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Axle configuration Front axle: Alloy wheels; Max. axle load: 8,000 kg Rear axle 1: Alloy wheels; Max. axle load: 11,500 kg Rear axle 2: Alloy wheels; Lift axle; Max. axle load: 7,500 kg; Steerable Weights Unladen weight: 10,645 kg Payload: 16,355 kg GVW: 27,000 kg Functional Body brand: VERHAEGH SPECIALS MACHINE TRANSPORTER Loading platform height: 108 cm Maintenance, history, and condition APK (Technical Inspection): valid until 01/2027 Technical condition: very good Optical condition: very good Identification License plate: 92-BLL-9 RENAULT T 430 6X2 – CARRIER / MACHINE TRANSPORTER VERHAEGH SPECIALS BODY – RAMSEY WINCH – ONLY 74,480 KM – 1ST OWNER Csdpjzy Hppofx Agtorg Very nice and exceptionally well-equipped Renault T 430 6x2 carrier / machine transporter with an extremely stable and robust Verhaegh Specials machine transport body. The vehicle comes from a single owner, has only 74,480 original kilometers, and is in excellent condition. Thanks to the fully air-suspended 6x2 configuration, the liftable and steerable trailing axle, the long and low loading platform, the integrated aluminum loading ramps, and the powerful Ramsey winch, this vehicle is ideally suited for the professional transport of construction machinery, aerial platforms, telehandlers, forklifts, wheel loaders, cranes, and other heavy equipment. CHASSIS / DRIVE * Brand: Renault * Type: T 430 * Axle configuration: 6x2 * Engine power: 430 hp * Transmission: Automatic * Mileage: only 74,480 km original * Weight variant: 27,000 kg * Full air suspension * Last axle liftable and steerable * Wheelbase from 1st to 2nd axle: 460 cm * Alcoa aluminum rims * Tires approx. 70 % * Vehicle from 1st owner * Very low mileage * Technically and optically in perfect condition VERHAEGH SPECIALS MACHINE TRANSPORT BODY The vehicle is equipped with a professional Verhaegh Specials carrier and machine transport body. The body is particularly stable, heavy, and robustly constructed, making it ideal for the daily professional transport of heavy machines and equipment. DIMENSIONS OF LOADING PLATFORM * Length of loading platform: 775 cm * Width of loading platform: 255 cm * Loading platform height: approx. 108 cm The combination of a 7.75-meter-long loading platform and a relatively low loading height enables comfortable and safe loading and unloading of various machines. TRACON ALUMINUM LOADING RAMPS Equipped with high-quality...

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) Cedpfozy Hpijx Agterg The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: used, Year of construction: 2001, The award requires approval! Cjdpfx Aozy Hpcjgtsrg

Condition: good (used), functionality: fully functional, mileage: 465,240 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,325 mm, overall weight: 3,500 kg, first registration: 08/2014, loading space length: 4,720 mm, loading space width: 1,780 mm, loading space height: 1,950 mm, emission class: euro5, color: grey, suspension: steel, number of seats: 3, fuel: diesel, Equipment: ABS, air conditioning, airbag, electronic stability program (ESP), power assisted steering, truck registration, Mercedes-Benz Sprinter 316 CDI Panel Van MAXI Long/High Engine OM651 DE 22 LA, 120 kW (163 hp) Emission class Euro 5 B+ N1 Gr.III/N2 Codszy Hn Sjpfx Agtsrg 6-speed manual transmission ECO Gear Wheelbase 4325 mm, overhang 2015 mm Tempmatic air conditioning 3 seats Trailer hitch Paint color: Slate Gray MB 7315 Control code, rear axle bevel gear: 215 Axle ratio I = 3.923 Electronic Stability Program ESP Rear axle stabilizer, mounted under the frame Reinforced front axle stabilizer Reinforced shock absorbers High roof Audio 10 radio Heated and electrically adjustable exterior mirrors 3.5-ton vehicle Outside temperature display Side marker lights Third brake light Adaptive brake light Daytime running lights Crosswind assist Gear shift indicator Service interval display ASSYST Tires 235/65 R16 C Tread depth: 1st axle 9 mm, 2nd axle 6 mm Internal dimensions of the cargo area: L 4.72 m, W 1.78 m, H 1.95 m

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 4,050 mm, travel distance Z-axis: 1,600 mm, spindle speed (min.): 625 rpm, spindle diameter: 200 mm, table load: 100,000 kg, SCHIESS AR-601/142 – completely overhauled in 2014 Key technical data: X-axis (longitudinal travel of the table): 12,000 mm Y-axis (vertical travel): 4,050 mm Travel of the drilling spindle: 1,600 mm Cedozy Hnxepfx Agtsrg Travel of the milling spindle: 900 mm Spindle diameter: 200 mm Spindle power: 91 kW Spindle speed: 1.18–625 rpm Machining capacity: Max. drilling diameter: 1,600 mm Max. machining diameter: 3,000 mm Load capacity: 120 tons Rotary table: Diameter: 3,000 mm Max. load: 100 tons Included accessories: Steady rest Clamping plates: 2 pieces – 8 x 5 m 1 piece – 6 x 3 m Angle plates

Condition: good (used), Deckel FP1 milling machine with 3-axis Heidenhain digital display, fixed angular table, and SK 40 spindle mount. Accessories: counter supports, various collets. In good, operational condition. Can be demonstrated under power by arrangement. Codpfx Aszy Hnlsgtsrg

Condition: used, Year of construction: 2018, TSUGAMI M08SY-II CNC lathe Fanuc OiTD with Manual Guide 2 x C-axis powered tools Crjdpszy Hm Uefx Agteg Axis travels: X: 221 mm Z: 400 mm A: 506 mm Y: ±50 mm Main spindle max 4,500 rpm A2-6 7.5/11 kW (10/14.8 hp) Counter spindle max 4500 rpm 5.5/7.5 kW (7.4/10 hp) Max turning diameter 280 mm Max turning length 380 mm 12-station turret Chuck 210 mm Spindle bore 65 mm Parts catcher LNS chip conveyor Documentation Tool holders