Zipf GmbH

Condition: reconditioned (used), Year of construction: 2006, operating hours: 42,738 h, functionality: fully functional, turning diameter over cross slide: 328 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 83 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 4 rpm, overall weight: 4,300 kg, Equipment: documentation/manual, For sale: Well-maintained Weiler E 55 Universal precision lathe with cycle control. Year of manufacture: 2006 Prjdpsxzu Enofx Af Ned Control: Siemens Sinumerik 810D Powerline Operating hours: 42,738 h The ball screw on the Z-axis was recently replaced! The drive belt has also just been replaced! Technical Data: - Distance between centers: 2000 mm - Center height: 280 mm - Swing over bed: 570 mm - Swing over cross slide: 325 mm - Spindle bore: 83 mm - Drive power 60%/100% duty cycle: 20/17 kW - Speed range gear stage 1: 1–625 rpm - Speed range gear stage 2: 4–2500 rpm Total weight: 4300 kg Accessories: - 3-jaw chuck 315 mm - 5 Parat tool holders - Machine feet - Closed steady rest, clamping range 120–270 mm - Coolant device - Chip tray - Operating manual The machine can be inspected under power! Available immediately! We will load the machine for you! Transport can be arranged on request!

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, empty load weight: 8,400 kg, Submitting a bid obligates you to collect the item on time in calendar week 1 or 2 of 2026! Lathe with portal loading! MACHINE DETAILS Weight: 8,400 kg Pjdpfxsxzudks Af Nerd

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, empty load weight: 8,400 kg, Submission of a bid obligates timely collection in calendar week 1 or 2 of 2026! Pjdpjxzubpsfx Af Nsrd Lathe with gantry loading! MACHINE DETAILS Weight: 8,400 kg

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 100 mm Turning length : 580 mm In General: Year of manufacture:2007 Control system:Siemens 840 D Prjdpfx Aoxzmp Eef Nsd Turning diameter:100 mm Turning length:approx. 580 mm Bar capacity:32 mm Main spindle: Technology:Motorised spindle Speed:8,000 rpm Torque max.:100 Nm Power max.:26 kW C-axis:0.001° Bar capacity:32 mm Clamping cylinder:Hollow clamping cylinder Chuck:Hainbuch Spanntop Sub spindle: Technology:Motorised spindle Speed:8,000 rpm Max. torque:100 Nm. Max. power:26 kW C-axis:0.001° X-axis:145 mm Z-axis:380 mm Clamping cylinder:Partial hollow clamping cylinder Chuck:Hainbuch Spanntop Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 units Tool holder:VDI 25 Tool drive:6,000 rpm X-axis:220 mm Y-axis:60 (+/- 30) mm Z-axis:320 mm Tool carrier II (X/Z): Technology:Tool turret :Number of stations. 12 units Tool holder:VDI 25 Tool drive:6,000 rpm X-axis:120 mm Z-axis:345 mm Equipment: Chip management:Chip conveyor Coolant supply:Internal coolant system Bar loader:Irco Breuning Parts removal:Parts gripper + indexing conveyor Tailstock:Stroke 250 mm, quill MK 3 Chuck:2x Hainbuch Spanntop Tool holder:Various driven and static holders

Condition: used, Year of construction: 2005, control Traub TX8i weight of the machine ca. 4000 kg Prjdpfjxzk Rmex Af Nod

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected under power. Technical specifications: Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed range: 30 – 3000 rpm Tailstock: MK 2 Drive power: 1.5 kW Weight: 350 kg Podpfx Aoxzi I Def Njrd Dimensions: 1200 x 650 x 1550 mm

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl Prjdpfjxy Ub Hjx Af Ned Turning diam. : 120 mm Turning length : 380 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl Turning diameter:120 mm Turning length:380 mm Bar capacity:32 Main spindle: Technology:Belt spindle Speed:8,000 rpm Bar capacity:32 mm C-axis:0.001° Sub spindle: Technology:Belt spindle Speed:8,000 rpm Bar capacity:32 mm C-axis:0.001° Tool carrier: Technology:Tool turret Number of stations:16 Tool drive:8 stations Speed:6,000 rpm Tool holder:VDI 16 X-axis:400 mm Z-axis:400 mm Automation: Technologie:Industrieroboter Hersteller:Fanuc Typ:ARC Mate 100iC 6L Equipment: Position measuring systems:Directly in X/Z-axis Measuring probe:Marposs T18 Coolant supply:Minimum quantity lubrication Automation:Fanuc robot system

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 Dsl - Celos, _____ Description: Year of manuf. : 2022 Control : Siemens 840 Dsl - Celos Turning diam. : 140 mm Turning length : 235 mm In General: Year of manufacture:2022 Control system:Siemens 840 Dsl -CELOS Turning diameter:140 mm Turning length:253 mm Bar capacity:50 mm Main spindle: Technology:Motor spindle Speed:7,000 rpm Power:24 kW Torque:100 Nm C-axis:0.001°Chuck Sub spindle: Technology:Motor spindle Speed:7,000 rpm Power:24 kW Torque:100 Nm C-axis:0.001° Chuck:Hainbuch clamping top Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 25 Tool drive:8,000 rpm X-axis:240 mm Psdpfsxy Ubgsx Af Nerd Y-axis:70 mm (+/- 35 mm) Z-axis:350 mm Tool carrier II (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 25 Tool drive:8,000 rpm X-axis:125 mm Y-axis:70 mm (+/- 35 mm) Z-axis:380 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system incl. temperature control Bar loader:Top Automazioni Parts removal:Parts gripper + cycle belt Tailstock:Below counter spindle Chuck:2x Hainbuch clamping top Tool holders:Various driven and static holders

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Weiler DZ 65 / H4 Available from early February 2026 Y-axis Control: Siemens 840 D Turning diameter: 240 mm Turning length: 500 mm Bar diameter: 66 mm 16 driven tools – special feature Predpfx Aexywbief Njd Chip conveyor Sub spindle Interface for bar feeder Integrated bar puller for 1 m bars Enlarged coolant tank Hainbuch 65 Achsfix Mini Three-jaw chuck Reducing sleeves for spindles Y-axis: Ø1 - Ø350

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, turning length: 400 mm, turning diameter: 200 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,600 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 540 mm, type of input current: three-phase, Equipment: documentation/manual, LATHE MAZAK QUICK TURN 10N, year of manufacture 1986. Control: Mazatrol Space required: 1440mm x 2250mm Machine height: 1720mm Max. turning diameter: 200mm Max. turning length: 450 mm Turret type: 8 stations Tailstock: Automatic Machine weight: 2800 kg Manuals available Additional technical data: see pictures Prodpfxsxytu Sj Af Njd Includes collet chuck 42 mm and jaw chuck Optional: additional collet chuck 60 mm and 68 collets (see photos) The machine is sold as shown in the photos, without tooling on the machine. The machine is ready for operation and fully functional. It can be inspected under power.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Description: Pjdpfxoxyar Ro Af Nsrd The machine is in good technical condition. Testing is possible by prior arrangement and includes an LNS bar feeder. Max. turning length: 600 mm Max. turning diameter: 350 mm Max. diameter over bed: 580 mm Diameter over cross slide: 400 mm CNC type: Fanuc X-axis: 205 mm Z-axis: 630 mm Spindle bore: 76 mm Number of turret stations: 10 Adjustable speed: 4000 rpm Spindle motor power: 15 kW

Condition: good (used), Year of construction: 2005, functionality: fully functional, The machine is in good technical condition; testing is possible by prior arrangement. Machine (incl. chip conveyor): 290x235 cm, 3500-4000 kg. Transformer station: 65x60 cm, 150 kg. Max. turning length: 81.3 mm. Max. turning diameter: 99.1 mm. CNC type: Fanuc 21iT. X-axis: 300 mm. Z-axis: 240 mm. Spindle head: A2-6. Spindle bore: 33 mm. Number of turret tools: 8. Number of live tools: 10. Adjustable speed: 4000 rpm. Spindle motor power: 11 kW. Tailstock: no. Dimensions (L x W x H): 2600.0 × 2300.0 × 2400.0 mm. Weight: 3900 kg. Pjdpfxjxyaq Ts Af Nsrd

Condition: excellent (used), INDEX ABC 65 is an INDEX CNC Turning‑Milling‑Drilling Center designed for high precision, accuracy and reliability. Capacity: 2 turning spindles, 2 turrets; spindle bore 65 mm; spindle diameters 140/110 mm; travels Z300 X140 Y100 mm; turret positions 10/9 (back 8). Specs: main spindle stepless 0–6000 rpm, 25/35 kW, torque 80/120 Nm; back spindle 6000 rpm, 5/9 kW; driven tools 7.5/9 kW; tool shank 45 mm; indexing 0.4 s; rapids X30/Z50 m/min; power supply 3x400 V 50 Hz; installed power 41 kW; weight ~6500 kg; dims 3600×1280×1950 mm. Accessories: 300 l coolant, 80 bar high‑pressure, paper filter, lamp, collet device, USB, parts conveyor, chip conveyor, toolholder set. Achieves tight tolerances; ideal for automotive, watchmaking, aerospace, medical and toolmaking. Podpfx Ajxx U Svof Nord

Condition: used, JING YE CK09-R is a CNC Frontal lathe, designed for precision, high accuracy and reliable operation. Working capacities: 2 axes total, 1 spindle, 1 turret with 8 positions and 8 fixed tools. Main specifications: 50 Hz 3x 380 Volt supply, total power 5 kW; overall dimensions L1900×W1600×H1900 mm; machine weight approx. 1550 kg. Accessories: lamp, coolant system, workpiece loader, electronic handwheel, Ethernet and USB interfaces, workpiece conveyor, switch‑cabinet air conditioner, status light. Enables tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Pjdoxx U Iqopfx Af Njrd

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 978/9, turning length: 400 mm, travel distance X-axis: 120 mm, travel distance Z-axis: 300 mm, total height: 2,100 mm, total length: 3,500 mm, total width: 2,000 mm, overall weight: 3,000 kg, controller manufacturer: TRAUB, controller model: SYSTEM TX 8 F, TRAUB TND 160 CNC Lathe - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 36 A - Connected load: 18.8 kW The machine is equipped with a tailstock, a three-jaw chuck (diameter: 140 mm), an 8-position tool turret, and a chip conveyor. This is an item from a training workshop. Prjdpfx Afoxx Ny Is Ned FCA D-73235 Weilheim Teck, loaded onto truck

Condition: used, Year of construction: 2019, HAAS CNC - LATHE with Sub-Spindle DS - 30Y Year of manufacture: 02/2019 Total tool changes: 809,126 Total power-on hours: h Workpiece counter 1: 4,872 Workpiece counter 2: 4,872 Standard Equipment - Heavy-duty cast iron construction - Robust protective steel sheet enclosure - BMT turret with 12 stations - AC servo motors for axis drives - Synchronized spindles for on-the-fly workpiece transfer Main spindle: - Spindle speed up to 4,800 rpm - 22.4 kW spindle power - 254 mm diameter chuck Sub-spindle: - Spindle speed up to 4,800 rpm - 14.9 kW spindle power - 210 mm diameter chuck - Driven tools and C-axis - Flood coolant system - Automatic lubrication system - Air-conditioned control cabinet - HAAS CNC control to DIN 66025 / Fanuc compatible - Synchronized thread cutting - Spindle orientation - 1GB program memory - Tool load monitoring - Ethernet interface - USB interface - Lifting device HAAS CNC - LATHE with Sub-Spindle DS - 30Y Year of manufacture: 02/2020 Total tool changes: 335,409 Total power-on hours: 8,245 h Pjdpfxsxxkais Af Nsrd Workpiece counter 1: 8,360 Workpiece counter 2: 8,360 Standard Equipment - Heavy-duty cast iron construction - Robust protective steel sheet enclosure - BMT turret with 12 stations - AC servo motors for axis drives - Synchronized spindles for on-the-fly workpiece transfer Main spindle: - Spindle speed up to 4,800 rpm - 22.4 kW spindle power - 254 mm diameter chuck Sub-spindle: - Spindle speed up to 4,800 rpm - 14.9 kW spindle power - 210 mm diameter chuck - Driven tools and C-axis - Flood coolant system - Automatic lubrication system - Air-conditioned control cabinet - HAAS CNC control to DIN 66025 / Fanuc compatible - Synchronized thread cutting - Spindle orientation - 1GB program memory - Tool load monitoring - Ethernet interface - USB interface - Lifting device

Condition: ready for operation (used), Weiler Primus Lathe Precision Turning Machine with Accessories Weiler Primus Lathe: Center height: 125 mm Speed range: 40–3000 rpm Distance between centers: 400 mm Spindle bore: 24 mm Accessories: - 35 collets - Chuck - 4 Multifix tool holders - Accessory cabinet - Additional accessories as pictured You are welcome to arrange a viewing appointment. We can organize cost-effective shipping for you! Pedpfoxw R N Uex Af Nord You will receive a proper invoice. Net invoicing is possible for foreign customers provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers. Specified company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter: 42 mm, spindle speed (max.): 7,000 rpm, rapid traverse Z-axis: 60 m/min, overall weight: 5,500 kg, bar passage: 42 mm, bar diameter (max.): 42 mm, power: 57 kW (77.50 HP), bar length: 3,300 mm, Equipment: documentation/manual, rotational speed infinitely variable, 3 turrets Main and counter spindle C-axis on main and counter spindle Conveyor belt Predsxwwd Sepfx Af Njd IEMCA Boss – bar feeder Chip conveyor High pressure Machine operates with emulsion

Condition: good (used), Year of construction: 2008, 8 units Muratec turning centers. MURATEC MW 120, year 2003 MURATEC MW 200, year 2003 Prsdexwb Smspfx Af Ned MURATEC MW 120, year 2004 MURATEC MW 120, year 2004 MURATEC MW 120, year 2007 MURATEC MW 120, year 2007 MURATEC MW 120, year 2008 MURATEC MW 120, year 2008

Condition: used, Year of construction: 1991, functionality: limited functionality, For sale: Miyano BND34s lathe incl. LNS bar feeder & accessories Pedpfx Afoxvz A Ao Njrd A CNC lathe from the manufacturer Miyano is being offered for sale. The BND34s model is ideal for series production and is being sold as a package with various accessories. The unit is in ready-to-use condition and was in operation in our production until recently. Model: Miyano BND34s Bar feeder: LNS Hydrobar

Condition: ready for operation (used), Year of construction: 2017, Please contact by email only! Thank you! Predoxvw D Nepfx Af Nsd

Condition: used, MURATEC WIEDEMANN MOTORUM 2048 CNC TURRET PUNCH MACHINE MAKE MURATA WIEDEMANN, MADE IN JAPAN MODEL MOTORUM 2048 CONTROL FANUC 30i TOUCH SCREEN YEAR 2016 CAPACITY 20 TONS SHEET SIZE (WITH ONE REPOSITIONING) 1250mm x 2500mm SHEET THICKNESS MAX. 6.35 mm Y, X STOKE Y AXIS: 1360.0 mm X AXIS: 2550.0 mm PUNCHING ACCURACY +- 0.1mm THROAT DEPTH 1340.0 mm MAX ALLOWABLE SHEET WEIGHT 150 KG HIT RATE 1.0T 25 mm PITCH 8.3 mm stroke: 355 HPM 0.5 mm PITCH 1.4 mm stroke: 900 HPM SIMULTANEOUS AXIS SPEED 125 m/MIN PUNCHING ACCURACY +- 0.1 mm TURRET INDEX SPEED 35 RPM COMPRESSED AIR QUANITY: 100NL/MIN PRSSURE: 0.5 MPa POWER SUPPLY 19 kVA PLUS Pjdpfx Afoxvch Tj Nord GOOD SET OF TOOLING ONE OWNER FROM NEW VERY LESS HOURS SAFETY GUARDS

Condition: excellent (used), functionality: fully functional, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck set, collets from 3 to 30 mm, 40 collets, some duplicate sizes >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live centre Pjdpfx Afexu Hlas Njrd For Safety: >> Cover for lead and feed screw >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe from 1988 is being offered in very good condition. The machine is of course fully functional. The lead and feed screws are covered for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our facility.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 352 mm, travel distance Z-axis: 250 mm, controller model: Fanuc Series 0i Mate-TD, number of slots in tool magazine: 8, Equipment: chip conveyor, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel X-axis: 352 mm Travel Z-axis: 250 mm Spindle bore: 42 mm Prodpfx Afext E Eie Nsd Turning diameter over tool carrier: 70 mm Max. spindle speed: 5,000 rpm Available tool stations: 8 MACHINE DETAILS Control: Fanuc Series 0i Mate-TD Dimensions & Weight Dimensions (L x W x H): 2500 x 1200 x 1700 mm Weight: approx. 2000 kg EQUIPMENT Power chuck D135 mm Collet holder 173E Parts catcher Chip conveyor

Condition: good (used), Year of construction: 2007, turning length: 600 mm, spindle bore: 33 mm, Distance between main spil and left turret 404 mm Distance between spil and sub spil nose minimum 260 mm Distance between spil and sub spil nose maximum 760 mm Max. turning Ø: 180mm X-Axis: 160mm Z-Axis: 210/600mm Spindle bore: 33mm Speedrange: 4000Rpm Predpfx Aextb Nwef Ned Spindle power: 7.5kW Subspindle speeds:4000Rpm Subspindle bore: 7.5mm Length: 3100mm Width: 1700mm Height: 1800mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!