LV Trading BV

Condition: excellent (used), mileage: 580,739 km, power: 248 kW (337.19 HP), first registration: 10/2010, fuel type: diesel, tire size: 315/60 R22.5, axle configuration: 4x2, wheelbase: 5,200 mm, fuel: diesel, color: other, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 9,380 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 6,900 mm, loading space width: 2,500 mm, loading space height: 2,470 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, parking heater,

Year of construction: 1994, condition: ready for operation (used), Operating wire diameter: approx. 0.05-4 mm, max. feed stroke: 100 mm, cut length: 5-4000 mm, minimum cut length: 5 mm, max. output: 500 parts/min, max. wire speed: 50 m/min. An on site inspection is possible. Dedpfxjzkvmxj Aitekp

Condition: ready for operation (used), Operating hours: 59,018h, Equipment: Workpiece magazine, Linear transfer system, Station I: Swaging unit HU 15/VE, 4-die version, Stations I+II: Hydraulic feed unit VS 29/200, Version G, Station II: Swaging unit HE 17-V, Station III: Rotary station DS 19, Station III: Cutting tool SW 2, Station III: Hydraulic feed unit VS 29/200, Version A, Hydraulic pump drive, Cooling unit KE 33, Cooling unit KE 15, Central lubrication system, Documentation available, Operating manual, Oil specification, Maintenance and lubrication instructions, Hydraulic schematic HP 361, Hydraulic functional diagram, Hydraulic spare parts list, Electrical schematic with parts list Stp. 484, General assembly drawing. An on-site inspection is possible. Dkedpfx Aozkvmreitop

Condition: ready for operation (used), An automatic Treif dicing and strip cutting machine is available. Feed area dimensions X/Y/Z: 400mm/100mm/100mm, grid cross section X/Y: 96mm/96mm, cutting length range: 0.5mm-32mm, max. throughput: approx. 1200kg/h, machine dimensions X/Y/Z: approx. 1400mm/850mm/1100mm, weight: approx. 275kg. An on-site inspection is possible. Djdpjzkvmlefx Aitskp

Condition: ready for operation (used), Year of construction: 2006, Offered is a Hurco CNC vertical machining center including spare parts. Travel X/Y/Z: 1270mm/660mm/610mm, table dimensions X/Y: 1500mm/660mm, max. table load: approx. 1360kg, spindle speed: 10000rpm, spindle taper: SK40, main drive power: approx. 18.5kW, tool pockets: 24, feed X/Y/Z: 30m/min, feed Z: 20m/min, rapid traverse X/Y: 30m/min, rapid traverse Z: 20m/min, spindle operating hours counter: approx. 7676h, control: Hurco Ultimax. Machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, machine weight: approx. 9000kg. Inspection possible by arrangement. Dodpfxozkvmfj Aitjkp

Year of construction: 1991, condition: ready for operation (used), Connected load: 11.5kW, rated voltage: 380/220 V, rated current: 25 A, control voltage: 24 V, upstream fuse: 35 A, operating hours: 56,780 h. Equipment: Complete machine assembly, Machine base, Workpiece magazine, Linear transfer system, Hydraulic feed unit (Stations I-IV): Version F, Option X, Hammering unit (Stations I+II): HE 17/D, Three-jaw version, Hammering unit (Stations III+IV): HE 17/E-D, Hydraulic feed unit (Station V): VS 29/200, Version F, Option X, Hammering unit, Cutting tool, Pump drive, Coolant system, Central lubrication system, Including hydraulic circuit diagram, Equipment list, Functional diagram, Electrical schematic. An on-site inspection is possible. Dsdszkvl Uopfx Aitjkp

Condition: ready for operation (used), A Se-Ma meat grinder and bowl cutter combination machine is available. Bowl cutter volume: approx. 50l, bowl diameter: 940mm, upper edge height on bowl cutter side: 820mm, knife heads: 6, grinder plate diameter: 130mm, feed bowl internal dimensions X/Y: 600mm/820mm, feed bowl external dimensions X/Y: 630mm/850mm, upper edge height on grinder side: 1040mm, machine dimensions X/Y/Z: approx. 1800mm/1050mm/1400mm, weight: approx. 500kg. The machine is not equipped with a mixing gear. An on-site inspection is possible. Dkjdpfxjzkvl Io Aitop

Year of construction: 1990, condition: ready for operation (used), A Deckel CNC universal milling machine is offered. Travel X/Y/Z: 700mm/600mm/550mm, quill stroke: 80mm, milling head swivel range: +/-90°, spindle power: 12kW, max. spindle speed: 6300rpm, feed torque X/Y/Z: 13Nm/13Nm/21Nm, feed rate X/Y/Z: 6m/min, rapid traverse X/Y/Z: 6m/min, tool holder: SK40, measuring resolution: 0.001mm, 4th axis resolution: 0.001°, max. slide load: 1000kg, number of T-slots: 1, T-slot width: 14H7mm, mounting holes for table accessories: M12, control: Deckel Dialog 11. Machine weight: approx. 3900kg, electrical cabinet weight: approx. 475kg, 5110mm/4654mm/2335mm, floor space X/Y: approx. 6200mm/5700mm, floor load: 3500kg/m². Documentation available. Inspection by appointment possible. Dodpfszkvlzsx Aitokp

Condition: ready for operation (used), Year of construction: 1997, A PCS vertical form fill seal packaging machine is available. Documentation available. An on-site inspection is possible. Dkedezkvluepfx Aitep

Year of construction: 1985, condition: ready for operation (used), Equipment: Base frame, pump drive, coolant system, central lubrication system, control panel channel, workpiece magazine, feeding unit, linear transfer system, hammer unit, stations I to IV, hammer unit HE0, station V, cutting tool, hydraulic feed unit VS29/200, version F and X, hydraulic control system, electrical control system, hydraulic oil capacity: 175 l, lubrication oil capacity: 60 l, operating hours: 55,349h. Documentation available. On site inspection is possible. Djdpjzkvlnsfx Aitokp

Year of construction: 1985, condition: ready for operation (used), Equipment: Base frame, pump drive, hydraulic oil capacity, coolant system, lubrication oil capacity, central lubrication system, control panel channel, workpiece magazine, linear transfer system, hammer unit, cutting tool, hydraulic feed unit, hydraulic control system, electrical control system, operating hours: 77,107h. Documentation available. On site inspection is possible. Djdpfxjzkvlhj Aitokp

Year of construction: 1990, condition: ready for operation (used), A Kuper zigzag veneer splicing machine is offered. Overhang: 1150mm, working width: 1150mm, veneer thickness range: approx. 0.3mm-3mm, feed rate: approx. 10-30m/min, feed drive power: 0.55kW, working height: approx. 980mm, machine dimensions X/Y/Z: approx. 2160mm/780mm/1650mm, weight: approx. 540kg. Documentation available. Inspection possible by appointment. Dsdjzkvlbspfx Aitekp

Year of construction: 2023, condition: ready for operation (used), Two Scheugenpflug material preparation and feeding units are available. 1) Two-component machine Scheugenpflug A310, Year of manufacture: 2023, Tank volume: 60l/20l, Delivery volume: 293cm³/stroke, Machine dimensions X/Y/Z: approx. 700mm/1200mm/1950mm, Weight: approx. 400kg. 2) Two-component machine Scheugenpflug LiquiPrep LP804 20/20, Year of manufacture: 2023, Tank volume: 50l/20l, Machine dimensions X/Y/Z: approx. 1500mm/800mm/2050mm, Weight: approx. 430kg. Documentation available. An on-site inspection is possible. Dkodpfjzkvk Rox Aitjp

Year of construction: 1991, condition: ready for operation (used), Hydraulic CNC press brake EHT for sale. Press force: 1100kN, bending length: 3050mm, min./max. table-ram distance: 280mm/600mm, rapid approach speed: 100mm/s, working speed: 2mm/s-8mm/s, return speed: 100mm/s, backgauge adjustment range: 5-1000mm, backgauge adjustment speed: 200mm/s, backgauge vertical adjustment: +/-10mm, safety distance between tooling and operating elements: 120mm, stopping time: 75ms, stopping distance: 11mm, Control system: DAK 90. Machine weight: 8500kg. Documentation available. Inspection by appointment possible. Dkodpfxozkvk De Aitjp

Year of construction: 2026, condition: ready for operation (used), A brand new Spontan brush deburring machine, which was used only as a demonstration machine, for tubes and profiles is available. Product length range: 100mm-2000mm, Product diameter range: 8mm-90mm, Brush diameter: 300mm, Wall thickness range: 0.5mm-6mm, Max. workpiece weight: 10kg/m, Min. product length: 2×diameter, Brush wire diameter range: 0.2mm-0.5mm, Brush length: 450mm, Discharge height: 1300mm, Machine dimensions X/Y/Z: approx. 3500mm/1750mm/1700mm. Documentation available. An on-site inspection is possible. Dkedpszkvkwofx Aitsp

Year of construction: 2023, condition: ready for operation (used), An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling system, various grippers and gripper pairs, IoT, and management and monitoring software. This machine was never put into operation and is therefore in as-new condition. Documentation available. An on-site inspection is possible. Dkedpfx Aijzkvkqjtjp

Year of construction: 2021, condition: ready for operation (used), Two identical VAG diaphragm check valves are available. Nominal size: DN350, pressure rating: PN10, max. operating pressure: 10bar, max. operating temperature: 50°C, medium: water (1st stage filtrate), face-to-face length: 800mm, flange outside diameter: 505mm, flange thickness: 30mm, bolt circle diameter: 460mm, weight: approx. 280kg. Including two flange-to-flange pipe sections. Both items were only in contact with 1st stage filtrate in a drinking water treatment plant. Documentation available. An on-site inspection is possible. Dsdpfezkvkkjx Aitokp

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2010, total width: 2,480 mm, suspension: air, tire size: 385/55R22.5, wheelbase: 9,230 mm, color: black, Year of construction: 2010, Axle configuration Tyre size: 385/55R22.5 Make axles: Mercedes-Benz Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.900 kg Carrying capacity: 35.100 kg GVW: 41.000 kg Condition Technical condition: good Visual appearance: good Identification Registration number: OK-89-YY Additional information Please contact Arie or Pedro for more information = Additional options and accessories = Dedpfx Aezkvkdsitjkp - ADR - Air suspension - Disc brakes - EBS - Extandable - Lift axle - MB axles - Twist-locks = Remarks = 2x Extendable: Front and back All containers: 20, 30, 2x 20, 40 and 45 FT ADR EX/II - EX/III - FL - OX - AT

Condition: excellent (used), functionality: fully functional, mileage: 550,255 km, power: 309 kW (420.12 HP), first registration: 11/2015, fuel type: diesel, empty load weight: 12,185 kg, maximum load weight: 13,815 kg, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Year of construction: 2015, Equipment: air conditioning, tail-lift,

Condition: excellent (used), mileage: 409,382 km, power: 105 kW (142.76 HP), first registration: 07/2021, fuel type: diesel, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, traction control, = Additional Options and Accessories = Dkodozkvitepfx Aitjp - Passenger airbag - Driver airbag - Audio controls on the steering wheel - Third brake light - EfficientDynamics - Windows with electric operation - front - Alloy wheels - Steering wheel adjustable in height - Air suspension - Front center armrest - Multifunction steering wheel - Radio/CD player - Radio preparation - Rain sensor - Side mirrors with electric adjustment - Central locking with remote control = Additional Information = Number of doors: 4 Unladen weight: 2,409 kg Interior: black Technical condition: very good Optical condition: very good Damage: none Value-added tax/differential tax: VAT deductible License plate: VLF-57-N

Condition: excellent (used), 1.5 kW motor. Weight: 1000 kg. Table length: 125 cm. Two pneumatic clamping devices. 27 spindles. Spindle spacing: 35 mm. Dkjdpfx Aiozkvh Netsp

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Auction of a Kornit Allegro textile printer! Dksdjzkvh Ajpfx Aitep The machine is still in operation and can be inspected in the Paderborn area until week 30. After being dismantled in week 30, the machine will be stored. The machine will be made available for free loading in the Wuppertal area. EQUIPMENT ACS dryer Material feed Material removal Caldera RIP software

Condition: good (used), mileage: 247,616 km, power: 235 kW (319.51 HP), first registration: 12/2009, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: yellow, gearing type: automatic, number of gears: 12, emission class: euro5, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, full service history, power assisted steering, power mirror, soot filter, trailer coupling, = Additional Options and Accessories = - Outside temperature display - Work light - Leaf spring suspension - Brake booster - Skylight - Differential lock - Differential lock - Tachometer - Additional lighting - Driver's seat height adjustment - Remote central locking - High beam - Low noise - Speed limiter - Tilting hydraulics - Folding exterior mirrors - Air conditioning - Particle filter - Radio/CD player - Disc brakes - Sun visor - Tachograph - Immobilizer - Toolbox - Power take-off (PTO) - Power take-off (PTO) = Additional Information = Axle configuration Maximum front axle load: 9,000 kg Maximum rear axle load: 11,500 kg Weights Dodezkvhpjpfx Aitekp Unladen weight: 11,000 kg Payload: 9,500 kg GVW: 20,500 kg Functional Mast length: 18 m Lifting capacity: 6,200 kg Body manufacturer: N.C.H. Hydraulic Systems 1420.5.130 CE marking: yes Condition Technical condition: good Optical condition: good Damage: none = Company Information = Nidro cars Holland is located in the center of the country and is the right place to purchase your car, van, or truck. The stated price is the "internet take-away price." For questions or a test drive, please contact us: FIND OUR ENTIRE INVENTORY AT All types of trade-ins are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: excellent (used), CATALOGUE NUMBER 8041 TECHNICAL DATA - shaft width 240mm - shaft diameter 260mm - inlet width 250mm - inlet height 120mm - number of knives 9 pcs - automatic reversing with adjustment capability - screen dimensions 30mm - toothed drive shaft (bottom) 0.75kW - toothed drive shaft (top) 0.75kW - with conveyor belt 2060x260mm - feeder motor with conveyor belt 0.55kW - main motor 15kW - feeder dimensions (length/width/height) 2270x700x600mm - machine dimensions (length/width/height) 1550x850x700mm - weight 800kg ADVANTAGES - German production - automatic reversing with adjustment capability - with conveyor belt - very good condition - used shredder Dedpozkvhiofx Aitskp Net price: 29900 PLN Net price: 7119 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8040 TECHNICAL DATA - dimensions of the loading hopper (top, length/width): 850x1180mm - rotor width: 350mm - engine: 22kW Dedpfx Aiszkvhcstokp - screen size: 12mm - number of knives: 6 pcs - dimensions (length/width/height): 1260x1200x1890mm - weight: 980kg ADVANTAGES – German-made – very good condition – used shredder Net price: 25900 PLN Net price: 6167 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to fluctuations in the exchange rate)