Module T

Condition: ready for operation (used), Year of construction: 2024, machine/vehicle number: 167/2-401, functionality: fully functional, operating hours: 4,494 h, total height: 7,650 mm, total length: 2,000 mm, total width: 6,500 mm, Product Rip Saw Brand Holz-Her Type Zentre 6215 dynamic Measurements hxwxd approx. 200x650x765 cm Year 2024 Specifications Equipped with conveyor and discharge tables; dimensions: Conveyor belt LxWxH approx. 520x160x105 cm (A) ; discharge conveyor LxWxH approx. 470x273x105 cm (B) ; feed conveyor LxWxH approx. 490x370x105 cm © Details Please note: Disconnect up to the shut-off valve; the shut-off valve is NOT included in the lot . Please note! The power supply must be Psdpfx Ae Agu Itobaorc professionally disconnected. The buyer must provide their own hoisting and lifting equipment and have the machine professionally removed from the premises.

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 4,600 mm, color: green, overall weight: 2,690 kg, first registration: 12/2024, rear tire size: 21×9 14 PLY, total width: 4,790 mm, machine/vehicle number: 9948018, Equipment: front power take-off, hydraulic folding, lighting,

Condition: excellent (used), functionality: unexamined, Equipment: documentation/manual,

Condition: good (used), Year of construction: 2007, operating hours: 16,500 h,

Condition: good (used), Year of construction: 2022,

Condition: ready for operation (used), functionality: fully functional, Product Automatic plate storage system Brand Grundner Sondernmachinen MLD 300 Measurements lxbxh ca. 32,50x11,80x2,50 meter Specifications Pjdpfe Agu H Dsx Abaorc Equipped with a Bertschinger conveyor table, LxWxH approx. 450x250x98 cm, including guardrails, 380V Details Please note! The power supply must be professionally disconnected. The buyer is responsible for providing hoisting and lifting equipment and must have the machine professionally removed from the premises.

Year of construction: 2013, condition: refurbished (used), functionality: fully functional,

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,920 h, empty load weight: 6,500 kg, fuel type: diesel, Equipment: all wheel drive,

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 0990200191,

Condition: used, functionality: fully functional, Year of construction: 2011, working width: 6,000 mm, color: red, first registration: 06/2011, tank capacity: 220 l, machine/vehicle number: 6085947 I, Equipment: 3rd hydraulic function, front power take-off, hydraulic folding, lighting, onboard computer,

Condition: used, axle configuration: 3 axles, first registration: 07/2008, total length: 10,600 mm, total width: 2,550 mm, total height: 3,950 mm, suspension: air, tire size: 385/65 R22.5, color: other, Equipment: ABS, = Additional options and accessories = - Air suspension - Blower - Central lubrication system - Disc brakes - Lift Axle = Remarks = Superstructure Material: Aluminium Psdps Agu Hcsfx Abaorc = More information = General information Year of construction: 2008 Operating hours: 1.695 Registration number: BP310ZP Axle configuration Tyre size: 385/65 R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle Weights Empty weight: 8.680 kg Carrying capacity: 29.320 kg GVW: 38.000 kg Functional Make of bodywork: TSCI

Condition: good (used), Year of construction: 2013,

Condition: used,

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-250-21-1034, functionality: fully functional, input voltage: 380 V, total height: 1,400 mm, total length: 4,400 mm, total width: 840 mm, Product Nesting Machine Brand Weeke Type Optimat BHP 210 Profiline Measurements L x W x H approx. 650 x 400 x 230 cm Year 2010 Specifications Serial number 0-250-21-1034, equipped with a Bertschingere conveyor table, LxWxH approx. 440x250x98 cm, control cabinet, and guardrail, 380V Prodo Agu Exjpfx Abajc , including various tool holders and collets , Busch vacuum pump assembly (MM 1322 AV), HxWxD approx. 255x84x140 cm. The upper pump must first be removed to vacate the space; the walls of the room where it is located must not be cut into Details Please note: Disconnect up to and including the flexible hose; the shut-off valve is NOT included in the lot . Caution! The power supply must be professionally disconnected. The buyer must provide their own hoisting and lifting equipment and have the machine professionally removed from the premises.

Condition: good (used), Year of construction: 2016,

Condition: good (used), functionality: fully functional, power: 22 kW (29.91 HP), fuel type: diesel, empty load weight: 3,650 kg, Year of construction: 2015, operating hours: 5,180 h, Equipment: gripper hydraulics,

Condition: used,

Condition: used,

Condition: good (used), functionality: fully functional, Year of construction: 2011,

Condition: good (used), Year of construction: 2024,

Condition: used, Year of construction: 2009, operating hours: 143 h, functionality: fully functional, machine/vehicle number: 283016, overall weight: 15,000 kg, fuel type: diesel, power: 504 kW (685.25 HP), output current: 909 A, output voltage: 400 V, output frequency: 50 Hz, motor manufacturer: Volvo Penta, type of cooling: water,

Condition: ready for operation (used), Year of construction: 2019, operating hours: 7,492 h, functionality: fully functional, machine/vehicle number: TZJ-08-K, mileage: 47,255 km, first registration: 06/2019, overall weight: 6,350 kg, fuel type: diesel, maximum load weight: 11,400 kg, empty load weight: 5,900 kg, gearing type: automatic, loading space volume: 5,300 m³, Product Sweeper Brand RAVO Type 540 Euro 6 Year 2019 Specifications Basic Specifications License Plate: TZJ-08-K Chassis Number (VIN): XL95F6CB4KA020390 Engine hours: 7,492 h Sweeping hours: 3,301 h Odometer: 47,255 km Sweeping odometer: 15,883 km Date of first registration: June 30, 2019 Engine & Drivetrain Engine: IVECO F4AFE411A 4-cylinder diesel engine Emission class: Euro 6 Power: 118 kW / 160 pk Torque: 580 Nm at 1,250–1,940 rpm Transmission: Hydrostatic, continuously variable transmission with automatic gearbox Weights & Dimensions Max. gross vehicle weight (GVW): 11,400 kg Curb weight: 5,900 to 6,350 kg (depending on body type/options) Payload: 5,000 to 5,300 kg Wheelbase: 1,800 mm Dimensions (L x W x H): approx. 470 x 210 x 260 cm Predpfx Abo Agu Dpoajc Capacity & Performance Waste container: approx. 4.3 to 5 m³ stainless steel (SS) container Container model: STH (Standard High Dump) Water Tank: approx. 600 liters (often equipped with a water recycling system) Suction Capacity: 14,000 m³/h

Condition: good (used),

Condition: used, mileage: 992,475 km, power: 355 kW (482.67 HP), first registration: 02/2018, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, parking heater, spoiler, tachograph,

Condition: good (used), Year of construction: 1997, operating hours: 33,000 h, functionality: fully functional, machine/vehicle number: 323, turning diameter over cross slide: 200 mm, turning length: 950 mm, turning diameter: 410 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 950 mm, spindle motor power: 7,500 W, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, total height: 1,700 mm, total length: 2,300 mm, total width: 1,400 mm, quill travel distance: 120 mm, quill diameter: 65 mm, quill stroke: 120 mm, swing diameter over cross slide: 200 mm, feed rate Z-axis: 10 m/min, turning diameter over bed slide: 410 mm, turning diameter over top slide: 200 mm, type of input current: three-phase, torque: 700 Nm, overall weight: 2,100 kg, swing diameter over bed slide: 410 mm, bar passage: 54 mm, swing diameter over top slide: 200 mm, spindle nose: DIN 55027 Size 6 type, center height: 200 mm, bar diameter (max.): 54 mm, travel distance cross slide: 230 mm, Equipment: rotational speed infinitely variable, 1997 Weiler E35 Cycle-Controlled CNC Lathe Used 1997 Weiler E35 CNC / Cycle-Controlled Lathe for Sale – Weiler D1 Control – 410mm Swing – 54mm Spindle Bore – 3,000rpm – 10 Tool Holders Manufacturer: Weiler Model: E 35 Machine Type: CnC Lathe Year: 1997 Condition: Working Well Machine Description The Weiler E35 is a high-quality German-built precision lathe combining the flexibility of a conventional centre lathe with the productivity of CNC/cycle-controlled machining. This machine is equipped with the Weiler digital conversational cycle control, allowing straightforward manual machining as well as programmed turning cycles for repeat work, tapers, radii and other common turning operations. With approximately 410mm swing over the bed, 54mm spindle bore and spindle speeds up to 3,000rpm, the E35 is particularly well suited to precision engineering, toolroom work, maintenance departments, repair work and small-to-medium batch production. The machine has approximately 33,000 power-on hours and is supplied with 10 quick-change toolpost holders. Main Specifications Manufacturer: Weiler Werkzeugmaschinen Model: E35 Year: 1997 Serial Number: 323 Machine Type: Cycle-Controlled / CNC Centre Lathe Control: Weiler Digital Cycle Control / D1-type control Power-On Hours: Approx. 33,000 hours Turning Capacity Swing Over Bed: 410mm Swing Over Cross Slide: 200mm Centre Height: 200mm Spindle Bore: 54mm Maximum Chuck Diameter: 250mm Faceplate Diameter: 355mm Distance Between Centres: 950mm Spindle Spindle Speed Range: 1–3,000rpm Spindle Power: 7.5kW Maximum Spindle Torque: 700Nm Pedpfx Aj Agu A Sebajrc Spindle Bore: 54mm Spindle Internal Taper: MT6 Spindle Nose: DIN 55027 Size 6 type The combination of a 54mm spindle bore and substantial torque makes the E35 suitable for both precision finishing and heavier general turning work. Weiler Cycle Control The machine is fitted with the Weiler conversational cycle control, designed to make CNC turning accessible without requiring full conventional G-code programming for every job. The control provides functions for operations such as: Straight turning Facing Taper turning Radius turning Threading Positioning Feed control Spindle speed control Repetitive machining cycles Manual machine operation Conversational cycle programming This type of control makes the E35 particularly attractive to toolrooms and general engineering workshops where both one-off components and repeat batches are produced. Feed & Axis Performance Longitudinal Feed Range: 0.001–20mm/rev Cross Feed Range: 0.001–20mm/rev Longitudinal Rapid Traverse: 10m/min Cross Rapid Traverse: 5m/min Cross Travel: 230mm Tailstock Tailstock Taper: MT4 Tailstock Quill Diameter: 65mm Tailstock Quill Stroke: 120mm The tailstock allows the machine to support longer workpieces and carry out drilling, reaming and centre-working operations. Tooling Included The machine is supplied with: 10 quick-change toolpost holders Electrical Specification Operating Voltage: 400V Frequency: 50Hz Connected Load: 10kW Nominal Current: 18A Control Voltage: 24 / 230V Approximate Machine Dimensions Overall Length: 2,300mm Overall Width: 1,400mm Overall Height: 1,700mm Machine Weight: 2,100kg Please Note: All specifications, dimensions, capacities, speeds and machine details quoted above are approximate and are provided for guidance only.