Transtech Industrieservice B.V.

Condition: good (used), Year of construction: 1999, Saw with planing head unit Cutting length: 3020 mm Year of manufacture: 1999 Pgjdez Hcgnjpfx Appot Equipped with a rear support table and stop with positioning indicator Space requirement: 4.78 x 1.56 m

Condition: used, Leybold Trivac D8B vacuum pump with a single-phase motor, 230V, 50Hz. Podpfxoz Hcgbe Appjgt

Condition: used, functionality: unexamined, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 200 mm, fuel type: electric, fork length: 2,000 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 105 kg, total length: 2,380 mm, total width: 540 mm, fuel: electricity, SONSTIGE OSE2500 – Electric low-lift pallet truck TECHNICAL DATA Pedoz Hcf Rjpfx Appegt Lifting capacity: 2.000 kg Lifting height: 200 mm Fork length: 2.000 mm Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Service weight: 105 kg Length: 2.380 mm Width: 540 mm Year of manufacture: 2023 Internal no.: 1700300 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 200 mm, fuel type: electric, fork length: 2,000 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 105 kg, total length: 2,380 mm, total width: 540 mm, fuel: electricity, SONSTIGE OSE2500 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 200 mm Fork length: 2.000 mm Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Service weight: 105 kg Length: 2.380 mm Width: 540 mm Year of manufacture: 2023 Internal no.: 1700301 Pedpfxez Hcf Do Appsgt Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 200 mm, fuel type: electric, fork length: 2,000 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 105 kg, total length: 2,380 mm, total width: 540 mm, fuel: electricity, SONSTIGE OSE2500 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 200 mm Fork length: 2.000 mm Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Service weight: 105 kg Podsz Hcfwopfx Appegt Length: 2.380 mm Width: 540 mm Year of manufacture: 2023 Internal no.: 1700302 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2023, lifting height: 200 mm, fuel type: electric, fuel: electricity, SONSTIGE OSE2500 – Electric low-lift pallet truck TECHNICAL DATA Lifting height: 200 mm Drive: Elektro 24V Year of manufacture: 2023 Internal no.: 1700303 Location: 14974 Ludwigsfelde bei Berlin Pedpfx Aez Hcfqoppogt Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 200 mm, fuel type: electric, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 72 kg, total length: 1,500 mm, total width: 540 mm, fuel: electricity, TVH TRP0007 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 200 mm Fork length: 1.150 mm Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Pjdez Hcfkepfx Appsgt Service weight: 72 kg Length: 1.500 mm Width: 540 mm Year of manufacture: 2025 Internal no.: 1700306 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 200 mm, fuel type: electric, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 72 kg, total length: 1,500 mm, total width: 540 mm, fuel: electricity, TVH TRP0007 – Electric low-lift pallet truck TECHNICAL DATA Podpfx Aoz Hcfdsppjgt Lifting capacity: 2.500 kg Lifting height: 200 mm Fork length: 1.150 mm Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Service weight: 72 kg Length: 1.500 mm Width: 540 mm Year of manufacture: 2025 Internal no.: 1700307 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: unexamined, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 200 mm, fuel type: electric, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 72 kg, total length: 1,500 mm, total width: 540 mm, fuel: electricity, TVH TRP0007 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 200 mm Fork length: 1.150 mm Drive: Elektro 24V Tyres: Tandem Polyurethan / Gummi Service weight: 72 kg Length: 1.500 mm Width: 540 mm Podpsz Hcd Tsfx Appsgt Year of manufacture: 2025 Internal no.: 1700308 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), lifting capacity 200 kg Psdpfxsz Hccvj Appogt lifting speed 4 m/min motor power 0.45 kW remote control operation safety button chain 5x15 mm year of production 2004

Condition: good (used), Year of construction: 1997, functionality: fully functional, 1 x CNC long-turn lathe Star SA 12/16 Year of manufacture: 1997 Control system: Fanuc 18 i-T with magazine loader Iemca CH 220/32 Year of manufacture: 1998 The counter spindle of the machine was re-bearinged approximately 6 months ago. Psdpez Hccijfx Appegt The machine can be inspected in operation and under power at the production facility.

Condition: good (used), Year of construction: 1969, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm Pedpjz Hcb Sofx Appogt max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: used, Year of construction: 2022, Overview Pgodpfxez Hcb Es Appst SMI ECOBLOC ERGON 6-20-5 HC EV blow moulder-filler-capper combiblock for still mineral water in 6.0 L PET bottles, max. 6,000 bottles/h. Built in 2022, started up in 2023 and run only 3 to 4 times a year. The complete downstream line (handle application, labelling, robot palletizing) is also on offer. Technical data - Year of manufacture: 2022, start-up 2023 - Capacity: max. 6,000 bottles/h - Product: still mineral water - Container: 6.0 L PET bottle - Preform: 100% rPET, 86.5 g - Closure: 48/41 cap Equipment - SMI blow moulder for 6 moulds - Filler with 20 filling valves - Capper with 5 capping heads - Cap sorter and cap elevator - Pressco control system for preform and neck inspection, integrated in the combiblock Not included Blow moulds, preform and cap feeding from the pallet tipper to the hoppers, high-pressure compressor for the blow moulder. Condition As-new condition, low operating hours. Annual preventive maintenance by the OEM plus regular in-house maintenance. In production until the end of April 2026 and still installed; dry run on request, inspection by appointment. Electrical and mechanical drawings, PLC programs with backups, service and maintenance manuals and spare parts books are included. Availability From October 2026; the machine must be dismantled by the end of October 2026. Dismantling, packing and truck loading can be arranged on request. Location: France.

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm Podpfxez Hcbro Appegt

Condition: excellent (used), length: 4022 mm width: 209 mm engine power: 0.092 kW Pedpfx Apjz Hcbfepjgt

Condition: good (used), Year of construction: 1964, Sheet width: 1650 mm Sheet thickness: 4 mm Straightening roller diameter: 45 mm Support rollers: 140 pieces Pgjdpfx Aez Hca Isppot Straightening rollers: 17 pieces

Condition: used, Year of construction: 2007, Overview KHS Innofill NRF filling and closing monoblock for still wine in glass bottles, built in 2007. A 50-valve filler is followed by two 10-head closers: a KHS natural-cork closer with vacuum device and an aluminium roll-on capper by Zalkin, so the machine closes either corks or screw caps. Output 12,000 bottles per hour. The operator panel and software were updated by KHS in 2022. Technical data - Manufacturer: KHS Pedpfxez Hcaue Appjgt - Model: Innofill NRF - Year of manufacture: 2007 - Output: 12,000 bottles/h - Filler: 50 filling valves, pitch circle 1,800 mm, filling tube diameter 20 mm - Cork closer: KHS, 10 heads, pitch circle 360 mm, electrically heated cork jaws, cork sorter mounted on top - Vacuum device with vacuum pump - Screw-cap closer: Zalkin aluminium roll-on capper, 10 heads, pitch circle 360 mm, for 31.4 x 24.2 mm aluminium caps - Machine pitch 36π, running direction left to right - Conveyor: stainless steel slat chain, 85 mm wide, conveyor height 1,250 mm - Power supply: 400 V, 3/N/PE, 50 Hz, 90 A nominal current, 100 A slow fuse; control voltage 24 V DC - Enclosure type 12 - Overall dimensions approx. 5,300 x 3,600 x H 4,400 mm Scope of delivery - Filler-closer monoblock with guarding, front panels slide up - Automatic central lubrication - Two infeed hoppers for corks and caps with elevating feed, approx. 1,600 x 1,200 x 1,720 mm and 1,500 x 1,250 x 1,550 mm - Stainless steel CIP unit, approx. 3,000 x 1,300 x 1,900 mm - Stainless steel control cabinet, approx. 2,500 x 750 x 2,100 mm - Stainless steel trolley, approx. 800 x 750 x 1,650 mm - Two trolleys with change parts, colour-coded format sets - KHS documentation: operating manuals, spare parts list, 2022 operator-panel supplement Condition Used. The machine is still installed at its production site and can be inspected by appointment. Availability Immediately.

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop Pgjdpfx Apoz Hcanepjt - Roll shelf

Condition: used, Year of construction: 2016, operating hours: 6,700 h, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 420 mm, controller manufacturer: Siemens, total length: 3,900 mm, total width: 2,550 mm, overall weight: 10,000 kg, coolant supply: 70 bar, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, Selling a used, universal machining center, Spinner U-1520, manufactured in 2016, from a training center with very few operating hours! Travel distances: X: 1520 Y: 520 Z: 420 C: 360 degrees B: -5 degrees (-90 degrees) +115 degrees Equipment: Siemens 840D control with ShopMill Chip conveyor Blum tool measurement system Blum measuring probe Calibration mandrel IKZ 70 bar with paper band filter 12000 rpm spindle, SK40 Tool changer Swinging operation, 3-axis - 5-axis machining Compressed air for the spindle Enclosed work area Clamping surface Pgsdpoz Hcahofx Appet 3-axis table: 920 x 540 mm Tilting round table: 650 mm diameter Accessories: Various tool holders, SK40 Machine feet 3D measuring probe Tool measurement system Machine is available immediately! We will handle the loading of the machine! Transport can be organized upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, KUPER FWM 630 NEW CONDITION (not used) veneer splicing machine for sale! Accessories for start up included. Year of manufacture 2023 Stand projection 630 mm Veneer thickness approx. 0.4-2 mm Feed speed 7 m/min Zigzag stitching Pgsdpfx Aez Hcabjppjt Heating head approx. 90 W Foot pedal control Power supply 230 V CE marking (Original operating instructions in german) Gross wight approx. 40 kg Space required (L x W x H) approx. 890 x 365 x 475 mm

Condition: used, Year of construction: 2008, machine/vehicle number: LV082, overall weight: 44,000 kg, Pittler PV1250 Vertical Turning Machine/Drill. Weight 44,000 kg. Condition Machine needs work. Delayed removal unit will be ready for removal by the end of September. Pjdpfoz Hb U Rex Appegt Buyer responsible for removal, contractor must be licensed and insured.

Condition: good (used), Year of construction: 1983, Sheet metal width: 6200 mm Sheet metal thickness: 8 mm Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Psdpfx Aoz Hb U Doppegt Machine weight (approx.): 19 t

Condition: used, mileage: 652,427 km, power: 324 kW (440.52 HP), first registration: 03/2009, fuel type: diesel, number of seats: 59, gearing type: mechanical, emission class: euro4, color: other, brakes: retarder, Year of construction: 2009, Equipment: ABS, air conditioning, cruise control, = Additional Options and Equipment = - DVD player - Air conditioning - Front refrigerator - Sleeper cab - Toilet - Webasto auxiliary heating = Further Information = Height: 370 cm Damage: None = Company Information = We are an international company based in Belgium, approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering an extensive parking area that serves as our exhibition space. We always have a large selection of buses of all brands, capacities, models, and price ranges in stock. We can find the right coach, school, or transit bus tailored to your needs or budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Opening hours for viewing used buses: Monday to Friday: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more. Pgodpjz Hb Uwefx Appot

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, total height: 1,000 mm, total length: 11,570 mm, total width: 2,440 mm, load capacity: 10,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: single-girder – Capacity: 10,000 kg – Lifting height: 6 m – Year of manufacture: 2001 – Hoist type: wire rope hoist – FEM/ISO hoist classification: 2m Dimensions – Span: 11,400 mm centre-to-centre – Overall length: 11,570 mm – Installation height: 660 mm Pgjdpfxoz Hb Uqo Appot – Width of wheel set including buffers: 2,440 mm – Width of wheel set excluding buffers: 2,300 mm – Wheelbase: 1,900 mm – Suitable for crane rail: 50×30 mm Features – Control: wired control panel – Crane manual available: no, to be prepared – Condition: in good working order – Dismantled: yes, available immediately

Condition: used, functionality: fully functional, mileage: 379,726 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,253 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cab: CR Battery, 210 Ah, rear Diesel engine DC13 164 450 hp Euro 6 /Japan Emission 2016 Gearbox GRS905R Pjdpez Hb Ukjfx Appsgt Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm Night heater WTA cab heater 3kW Storage rear lower, driver side refrigerator Technical specifications smart ADR Continental Tyres for front axle, 315/70 Tyres for rear axle, 315/70 Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only Main wheelbase, 3750 mm Axle ratio, i = 2.53 Fuel tank capacity 825 l, left Fuel tank capacity 395 l, right AdBlue tank capacity 105 l, right Road speed limiter, adjustable, limiter (engine speed regulation) Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED, automatic Daytime running light function LED and position lamps Fog lamp front type LED 3 diodes Cornering light Roof air deflector adjustable Door window air deflector Driver Assistance Package (ADAS) Adaptive cruise control (ACC) Lane departure warning system Lane Departure Warning with Active Steering Active Lane Keeping Assist Tyres Information Front left - 9 mm Front right - 9 mm Rear left inner - 5 mm Rear left outer - 6 mm Rear right inner - 9 mm Rear right outer - 5 mm