Koerkamp

Condition: like new (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 3,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Unused Lascentrum MIG/TIG 200 ACDC Synergic MIG & TIG ACDC for steel, stainless steel and aluminium. Ideally suited for use at home, on site, for general welding work, light steel/stainless steel/aluminium construction, and in the workshop. 5-200 AMP 230 Volt Synergic ACDC TIG Pulse 2/4 Step Gas pre flow / Gas post flow Start current / End current Up slope / Down slope Pulse Time / Pulse Frequency AC Balance / AC Frequency adjustable AC Wave adjustable Spot welding Fixed programs / Program memory Elektrode option Including: SB150 Welding torch 3 Meter SR17 Tig Welding torch Earth cable 3 Meter 35mm² Elektrode cable Gas hose Manual (If in the original packaging) Original Packaging 3 Months Warranty of Cjays The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test Welding is possible in our Workshop in Valkenswaard Ppedozqc U Aspfx Agmow Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), functionality: fully functional, total height: 450 mm, total width: 240 mm, total length: 670 mm, input voltage: 400 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 4,000 mm, welding current at 60% duty cycle: 250 A, welding current at 100% duty cycle: 200 A, welding current (min.): 15 A, welding current (max.): 300 A, Unused Lascentrum MIG 300 DP-3 Synergic Double Pulse MIG/MAG for steel, stainless steel and aluminium. Ideally suited for on-site work, general welding, medium-duty steel/stainless steel/aluminium structural work, and in the workshop. 15-300 AMP 400 Volt Synergic Puls / Double Pulse 2/4 Step / 4 Roller Drive Fixed Programs / Program Memory Stick Option Including: SB250 3 Meter Welding Torch Earth Cable 3 Meter 35mm² Electrode Cable Gas hose Manual (If available in the Packaging) Original packaging 3 Months Warranty Psdjzqc Aaspfx Agmepw The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test welding is available at our workshop in Valkenswaard. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, type of cooling: water, hose package length: 4,000 mm, welding current (min.): 25 A, welding current (max.): 450 A, Second-hand Röwac PU450 Double Pulse MIG Refurbished, tested, serviced and ready for immediate use 3 Months Warranty Specifications: Ppjdpfx Agezp D Afjmjw 25-450 AMP 400 Volt Pulse / Double Pulse Synergic Water-cooled 2/4 Step 4 Roller drive Gas pre flow / Gas post flow Start current / End current Fixed programs / Program memory Elektrode option Including: 4 Meter Welding torch, earth cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, type of cooling: water, hose package length: 15,000 mm, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, welding current (min.): 20 A, welding current (max.): 500 A, Esab Origo Mig 502cw – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use 3-month warranty Specifications: 20-500 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller Drive Burnbacktime adjustable End current Elektrode option Including: 4 Meter Welding Torch, earth cable with clamp, gas cable, and 15 metre interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Ppjdpfxozp Dzne Agmsw Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 24 months, type of cooling: water, welding current (min.): 30 A, welding current (max.): 400 A, OTC DAIHEN CPTX-i 400 2W Built for professionals. Ready for years of production. Looking for a reliable industrial MIG/MAG welding machine that performs day after day? The OTC DAIHEN CPTX-i 400 2W is designed for companies that value reliability, welding quality and low operating costs. Fully inspected, tested and ready for immediate use. ✔ Industrial 400 Amp inverter Pedpoznt Riefx Agmspw ✔ Exceptional arc stability ✔ Built for intensive daily use ✔ Reliable Japanese technology ✔ 3 months warranty Included: • OTC wire feeder • Interconnecting cable • Ground cable • Welding torch (if included) 🌍 Worldwide shipping available. 📩 Contact us for more information, photos or a demonstration. Specifications 400 Amp 400 Volt Water-cooled MIG/MAG Synergic 2/4 Step Industrial inverter 4-roll wire feed 24 Months Warranty Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current (min.): 40 A, welding current (max.): 420 A, ESS Powermag 461 – Water-Cooled MIG/MAG Double wire feed 3 Months Warranty Refurbished, tested, serviced, and ready for immediate use. Specifications: 40-420 AMP 380 Volt Water-cooled Synergic 2/4 Step / 4 Roller drive Double Wire Feed 36 Steps adjustable Spot welding Ppsdpfx Agsznt Hqemew Fixed programs Including 2 MIG PRO5000 welding torches, earth work cable with clamp, gas cable, and +- 3 Meter Interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), Year of construction: 2024, operating hours: 8 h, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 36 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 387 A, protection type (IP code): IP23, welding current (min.): 2 A, welding current (max.): 500 A, input frequency: 50 Hz, OTC A500P – Water-cooled TIG ACDC Welding Machine 36-month warranty Demo Model, Ready for immediate use for manual welding or robotics. Suitable for: Robotic welding, aluminium, steel and stainless steel production welding, heavy construction, machine building. Not suitable for: On location, hobby. Specifications: 2-500A 60% ED 500A 380 Volt AC TIG / DC TIG / AC-DC TIG Pulse Synergistically adjustable Water-cooled 2/4 Step High frequency Pre gas / Post Gas Start current / end current Up slope / Down slope AC Balance / AC Frequency Pulse Frequency Spot welding Pjdpfeznt D Nsx Agmepw Programme Memory Electrode option Includes: PRO30 8-metre welding torch, ground cable, and gas hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2021, Professional TIG Welding machine FRONIUS type TransTig 2200 Job G/F TIG direct current (DC) Pedpfszmxvhox Agmjpw Maxi power: 220 A 2-step and 4-step mode (see more technical details on photo) Year of construction: 2021 New, never used (Purchased price: 3 594 euros) Voltage: 230 V mono

Condition: used, Year of construction: 2003, Welding Rotator SAF POSISAF 1E Shelf diameter: Ø 295 mm Year of construction: 2003 Maxi Capacity: 100 kg Podpezmxvbjfx Agmopw Manual Swivel Rotation by speed varitator right/left Voltage: 220 V mono Total dimensions on support: 400 x 400 mm x H 1100 mm

Condition: used, Welding Rotator SAF POSISAF 1E Shelf diameter: Ø 295 mm Max capacity: 100 kg Manual Swivel Rotation by speed varitator right/left Equipped with one 3-jaws concentric chuck Ø 200 mm Voltage: 220 V mono Dimensions on support: L 800 x W 450 x H 1200 mm Ppsdpfezmxu Djx Agmsw

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, welding current (max.): 420 A, For sale: Kemppi Pro Evolution 4200 10-420 AMP (100% 400A) 400 Volt Pulse Double Pulse Synergic Water-cooled 2/4 Step 4 Roller drive Soft start Hot start Down slope Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished, serviced, and tested Including 2x PRO5000 Welding torches, earth work cable with clamp, and gas cable. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: Pedpfxszmnrro Agmspw OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: unexamined, type of input current: AC, input voltage: 230 V, ground cable length: 3,000 mm, overall weight: 11 kg, warranty duration: 3 months, type of cooling: air, hose package length: 4,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Cjays Tig 200E ACDC – Gas-cooled TIG ACDC 3 Months Warranty Specifications: 5-200 AMP 230 Volt 2/4 Step Pulse / Pulse Frequency Pre gas / Post gas Start current / End current Up slope / Down slope AC Balans Elektrode option Including: SR17 Welding torch, ground cable with clamp, gas cable, and manual. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: Ppsdpfozmnqzjx Agmjw OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: as good as new (ex-display), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 01164/18, Dane techniczne: Zakres przypawania: M3-MR16mm/ fi 3-14mm Materiał: stal konstrukcyjna, stal kwasoodporna A2 i A5, stal żaroodporna Psdpfx Aozmg T Ujgmepw Prąd przypawania: 300-1,000 A Czas przypawania: 3-1,000 ms Cykl pracy: do 50 trzpieni/min, zależnie od średnicy trzpieni Zasilanie: 3x400 V, 50/60Hz, 32AT

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, ground cable length: 4,000 mm, warranty duration: 24 months, type of cooling: air, welding current at 60% duty cycle: 273 A, welding current at 100% duty cycle: 212 A, welding current (min.): 30 A, welding current (max.): 300 A, OTC CPTX-i 300C - MIG MAG Welding Machine New and Ready-for-use 24 Months Waranty Specifications: Pedezmduvjpfx Agmspw 30-300A Synergic 4 Roller Drive Fixed Programs Steel & Stainless Steel Weldable Including: 4 meter PRO2500 Mig Welding Torch 5 Meter Earth Work lead with Clamp and Dinse plug Gas cable 0,8-1,0mm Wire feed rolls Pressure regulator Manual Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, functionality: fully functional, Micro and mini plasma welding generator, complete with torch and power cables. Psdpfezlud Ejx Agmspw Suitable for welding stainless steel with thicknesses ranging from 0.5 to 1.00 mm. Power supply: 380-41.5V (12A). Maximum welding current: 150A, with a welding speed of 5 to 10 mm/sec.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: W000257776, type of input current: three-phase, type of cooling: water, welding current (min.): 20 A, welding current (max.): 400 A, Oerlikon Citopuls MXW 420 MIG/MAG welding machine with water cooling – 400 A For sale is a used Oerlikon Citopuls MXW 420 MIG/MAG welding machine from the production stock of Syntegon Technology GmbH. The machine was used in its own production and is being sold due to a production and inventory consolidation, as it is no longer needed. The machine is functional and has been regularly inspected. The annual safety inspection certificate is available. This powerful industrial machine is particularly suitable for demanding MIG/MAG welding applications in the fields of mechanical engineering, metal construction, maintenance, and manufacturing. The water cooling ensures reliable operation even at higher welding currents. Technical data: Manufacturer: Oerlikon Model: Citopuls MXW 420 Year of manufacture: 2007 Serial number: W000257776 Welding current range: 20 – 400 A Power connection: 400 V Welding process: MIG/MAG [Machines_...likon 2134 | Excel] Water cooling with existing water cooler Welding torch included Condition: Ppodpfx Agjzlrwcsmjw Functional Safety inspected Used, from ongoing production The machine is ideal for workshops, metalworking shops, metal construction companies, as well as training and repair companies looking for a reliable industrial welding machine. Inspection possible by prior appointment. Loading upon agreement. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Disassembly, removal, and transport are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 89518, type of input current: three-phase, welding current (min.): 5 A, welding current (max.): 350 A, EWM Tetrix 350 AC/DC HF water-cooled TIG welding machine – 350 A For sale is a high-quality EWM Tetrix 350 AC/DC HF TIG welding machine from the inventory of Syntegon Technology GmbH. The machine was used in an industrial environment and is being sold as part of an inventory reduction, as it is no longer needed for production. The machine is fully functional and has been regularly maintained and inspected. The annual safety inspection certificate is available. This welding machine is suitable for both demanding TIG welding applications and electrode welding. The AC/DC technology allows for the processing of steel, stainless steel, and aluminum materials. Technical data: Manufacturer: EWM Model: Tetrix 350 AC/DC HF Year of manufacture: 2004 Welding current range: 5 – 350 A Power supply: 400 / 415 V Welding processes: TIG and electrode Water cooling with water cooler Torch included Condition: Functional Safety inspected Used, from ongoing production The machine is ideal for workshops, metalworking shops, metal construction companies, as well as training and repair facilities that are looking for a reliable industrial welding machine. Inspection is possible by prior appointment. Loading can be arranged. Important conditions: Please note that the sale of this machine is only possible under the following conditions: Ppsdpfxozlrnno Agmew • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at the buyer's risk. • The buyer is responsible for providing personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 19200, type of input current: three-phase, type of cooling: water, welding current (min.): 5 A, welding current (max.): 300 A, Equipment: type plate available, EWM TIG 300 DC HF TIG welding system with water cooling – functional For sale is a high-quality welding system from Syntegon’s production stock. The system is being sold due to a change in production processes or because it is no longer needed and comes from industrial use. The unit is functional and has been regularly inspected. The annual safety inspection report (UVV) is available. Technical data Manufacturer: EWM Model / Type: TIG 300 DC HF Year of manufacture: 1999 Serial number: 98350019004 Inventory number: 679 361 System number: 7000 1520 Welding process: TIG (GTAW) and SMAW (shielded metal arc welding) Welding current: 5 – 300 A Mains connection: 400 V Equipment TIG torch included Water cooling Integrated water cooler included Condition Functional Annual safety inspection report (UVV) available Used, from ongoing industrial operation Important conditions: Giscl Iozhnbpsdcwwjw Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales / Transfer conditions: • Dismantling, removal and transport are the responsibility of the buyer and at his own risk. • The buyer provides personnel, tools and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly. Ppjdpfx Aezlrkiegmow

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 97136003344, type of input current: three-phase, input voltage: 400 V, type of cooling: water, welding current (min.): 5 A, welding current (max.): 250 A, EWM TIG 250 DC HF water-cooled TIG welding machine – 250 A For sale is a used EWM TIG 250 DC HF TIG welding machine from the production stock of Syntegon Technology GmbH. The unit is being sold due to production adjustments and stock reduction, as it is no longer needed. The machine is functional and in used condition, appropriate for its age. The annual safety inspection has been carried out regularly. Pjdpfxozlrhhj Agmjpw Technical data: Manufacturer: EWM Type: TIG 250 DC HF Year of manufacture: 1997 Welding current: 5 – 250 A Mains connection: 400 V Welding process: TIG (GTAW) and electrode (SMAW) Water cooling with existing water cooler Welding torch included Condition: Functional Safety inspection available This machine is ideal for workshops, metalworking shops, metal construction companies, as well as training and repair companies looking for a reliable industrial welding machine. Inspection is possible by prior appointment. Loading can be arranged. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Disassembly, removal and transport are the responsibility of the buyer and at his own risk. • The buyer is responsible for providing personnel, tools and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 98350019004, type of input current: three-phase, type of cooling: water, welding current (min.): 5 A, welding current (max.): 300 A, Equipment: type plate available, EWM TIG 300 DC HF TIG welding system with water cooling – functional For sale is a high-quality welding system from Syntegon’s production stock. The system is being sold due to a change in production processes or because it is no longer needed and comes from industrial use. The unit is functional and has been regularly inspected. The annual safety inspection report (UVV) is available. Technical data Manufacturer: EWM Model / Type: TIG 300 DC HF Year of manufacture: 1999 Ppsdpjzlrdcsfx Agmjw Serial number: 98350019004 Inventory number: 679 361 System number: 7000 1520 Welding process: TIG (GTAW) and SMAW (shielded metal arc welding) Welding current: 5 – 300 A Mains connection: 400 V Equipment TIG torch included Water cooling Integrated water cooler included Condition Functional Annual safety inspection report (UVV) available Used, from ongoing industrial operation Important conditions: Giscl Iozhnbpsdcwwjw Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales / Transfer conditions: • Dismantling, removal and transport are the responsibility of the buyer and at his own risk. • The buyer provides personnel, tools and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 1,700 mm, welding current at 60% duty cycle: 320 A, welding current at 100% duty cycle: 250 A, welding current (min.): 20 A, welding current (max.): 400 A, ESAB Mig U4000iw Pulse – Water-cooled Pulse MIG Refurbished, serviced, tested and ready for immediate use. 3-Month Warranty Specifications: 20-400 AMP 400 Volt Pulse Synergic Water-cooled 2/4 Step 4 Roller drive Gas pre flow / Gas Post flow Hot start Crater-Fill Program mamory Stick option Including: 4 Meter Binzel MB EVO PRO 401D, Earth cable with clamp, and a 1,7 Meter interconnection package. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Ppjdpfxezlnm Ts Agmow You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, functionality: fully functional, Rotary table positioner for automatic or manual circumferential welding, equipped with: Ergonomic control console with touchscreen display for parameter management: variable and programmable rotation speed; weld overlap adjustable in degrees; pre-settable cycle counter; selectable number of welding passes; arc closing ramp; spot welding with adjustable dwell time; Ppedpfxozlih Ss Agmew post-gas stop; spindle acceleration and deceleration time. Dual multi-function foot pedal. Integrated rotating ground.

Condition: new, functionality: fully functional, Rotary table positioner with an inclinable tailstock, for automatic or manual circumferential welding, equipped with: Ppjdpfx Agszlig Usmow Ergonomic control console with a touch screen display for managing the parameters: variable and programmable rotation speed; weld overlap adjustable in degrees; pre-settable cycle counter; selectable number of welding passes; arc closing ramp; spot welding with adjustable spotting time; post-gas stop; acceleration and deceleration time of the spindle. Pneumatic tailstock with adjustable height. Integrated rotating fixture.

Condition: new, functionality: fully functional, Roller-type positioning device for welding flanges onto pipes. Ppodozlib Espfx Agmsw

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 245 A, welding current at 100% duty cycle: 210 A, welding current (min.): 5 A, welding current (max.): 260 A, Rehm Invertig 260 AC/DC Digital – Water-cooled TIG ACDC 3-month warranty Refurbished, tested, serviced, and ready for immediate use Specifications: 5-260 AMP 380 Volt Water-cooled ACDC Pulse 2/4 Step Pre gas / Post gas Start current / End current Up slope / Down slope Frequency adjustable AC Balance AC Frequency Electode option Including Parweld PRO18 Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: Pjdpfx Agszlfv Ssmspw OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.