M. Schaefer Ltd

Condition: used, 2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB Ijdsyuw S Espfx Abnjap >>2025 generalüberholt / 2025 complete overhauld

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit Iaedsyuuzdepfx Abnep • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Year of construction: 2002, condition: ready for operation (used), An Edelmann converted from a gravure printing machine into a rotary die-cutting machine is available. Principle: inline web processing with sheet stacking, materials: paper/cardboard/labels/die-cut parts, tool mounting: die-cutting plates, tool holder: magnetic cylinder, magnetic cylinder circumference: 24in, tool cassette: 12in, web width: 485mm, max. material width: 485mm, material weight range: 35-170g/m², max. roll diameter: 1200mm, max. production speed: 200m/min, production steps: roll-rotary die-cutting/cross-cutting/high-pile delivery. The machine ran little and is in as-new condition. Documentation available. An on-site inspection is possible. Iaodpfx Aoyt N Dksbnsp

Condition: used, Elektrische Exzenterpresse / Electric Eccentric Press Komex Eccentric Die Cutting Machine Iedpfjyt H Ndox Abnsap Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, New, original-packaged spare parts from Bobst Martin. All parts unused and in original packaging. Complete set. Iasdjyt Hwbepfx Abnsp

Condition: new, Drive: Frequency inverter (FU); Original and new! Iaedsyt Htvepfx Abnjp

Condition: good (used), Year of construction: 2014, operating hours: 35,000 h, functionality: fully functional, ETERNA 1620 SAL Extra ref 2950 year 2014 maximum sheet size: 1200 x 1620 mm material: Corrugated board Fala E, B, EB, BC Iaodsytum Ropfx Abnsp vacuum feeder extended feeder with sheet alignment section – mechanical register cleaning section batch delivery clamping force: 400 tons

Year of construction: 2010, operating hours: 50,000 h, condition: good (used), Bobst Novacut 106E ref. 2955 year 2012 counter: 180 million sheets maximum output up to 8,000 sph maximum sheet format – 740 x 1060 mm material: carton, corrugated board F, E – up to 4 mm stripping section Non Stop at delivery Iaedpfxjytufyj Abnep machine elevated by 300 mm

Year of construction: 2010, operating hours: 33,000 h, condition: excellent (used), Sanwa TRP 1060 Axia ref 2962 year 2010 max sheet size 740 x 1060 mm operating hours – 32,000 h cleaning section Isdpfxjytudcj Abneap NON Stop at feeder register control R, L motorized impression setting

Year of construction: 1979, condition: ready for operation (used), functionality: fully functional, Non-binding offer Automatic Die Cutting Machine Manufacturer: BOBST Autoplatine Model: SP-102 E Sheet Size: 1020 x 720 mm Iaedpfx Asyrxyrobnjp Year of Manufacture: 1979 Technical Data: - Max. Sheet Size: 1020 x 720 mm - Min. Sheet Size: 40 x 35 mm - Material Range: Paper/Cardboard: 80 – 1,000 g/m² Cardboard: 250 – 2,000 g/m² E+B flute: max. 4 mm - Max. Cutting Pressure: 250 t - Max. Production Speed: 7,500 sheets/h - Fully automatic die cutting machine with stripping station - Automatic high-pile feeder - High-pile delivery - Die cutting plates - Chase frames - Quick-action chase changing system - Complete with accessories - Machine in operating condition and well maintained - Video presentation available upon request! Price: on request Delivery: FCA Availability: immediately

Condition: excellent (used), Bobst Sprintera 106 PER - with PowerRegister Year: 2003 Paper, Cardboard, Corrugated Board Iajdpfoyna Naox Abnjp From 70 g/m², 250 - 2000 g/m² E Flute and B Flute up to 4 mm Sheet size max. 1060 x 760 mm / min. 400 x 350 mm Die cutting with gripper max. 1060 x 745 mm Embossing max. 1060 x 740 mm Gripper size: 9 - 17 mm Die cutting knife height: 23.8 mm Embossing height: 6.35 / 7 mm Pressure: max. 2.5 MN Speed (sheets/h): max. 12,000 Pallet height max.: 1600 mm Including: - Power Register - Height 60 cm – Quicklock System Centerline

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Iasdeymn Hwjpfx Abnjp Henk Hoos.

Year of construction: 1980, condition: excellent (used), functionality: fully functional, machine/vehicle number: 136/027, For Sale: WUPA PS 6.3 Automatic Die-Cutting Press We also offer other WUPA machines upon request. The machine underwent a complete overhaul in 2007 by QTM. During the overhaul, all major components were renewed, including the gripper bars, gripper chains, platen, and all ball bearings. Since then, the machine has been maintained in excellent condition. Comprehensive documentation is available. Both digital and hard copies of the electrical diagrams and exploded views are on hand. A production video can be provided upon request. Technical Specifications: Model: WUPA PS 6.3 Year of manufacture: 1980 Maximum sheet size: 1,450 × 1,020 mm Ijdpfx Ajymarrebnjap Minimum sheet size: 700 × 590 mm Maximum speed: 4,000 sheets/hour Maximum cutting force: 600 tons Material thickness: – Paper from 80 gsm – Board up to 2,000 gsm – Corrugated board up to E/B flute (according to our own experience) Equipment: – Non-stop feeder – Non-stop delivery Location: Germany Note: All information is provided without guarantee. Subject to errors and prior sale. If you are interested or have any questions, please feel free to contact us.

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine little used, in very good condition Equipment: – Pneumatic clutch and brake – Console – Heated plate – 3 working modes: single, continuous, time-delayed opening – Centralized lubrication – Additional safety guards – Working tools – Hard pressure plate Iodpfx Asyl Unxjbnoap

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication Iajdsyl Um Uepfx Abnep – additional safety guards – operation tools – hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Iodpfjyl Umnox Abneap Machine lightly used, in very good condition Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Iedeyl Ulwjpfx Abnsap Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter Isdpfx Absyl Rp Senoap MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm MAX. CUTTING PRESSURE: 550 tons

Year of construction: 1974, condition: good (used), Bobst SP 1120-E Max. size: 800x1120 mm Ijdpoylzdmjfx Abnjap Min. size: 380x450 mm Max. speed: 6500 sheets/h Year: 1974 Centerlien Quicklock system In production

Year of construction: 1988, operating hours: 60,000 h, condition: good (used), functionality: fully functional, Bobst SP 102 CER Max. sheet size: 720x1020 mm Min. sheet size: 350x400 mm Year: 1988 Max. speed: 8,000 sheets/h Iodpfx Aboylzaujnoap Max. cutting force: 250 t Centerline Quicklock system Non-stop in delivery

Year of construction: 1991, operating hours: 61,100 h, condition: good (used), functionality: fully functional, Bobst SP 102 CER Max. size: 720x1020 mm Min. size: 350x400 mm Year: 1991 Max. speed: 8,000 sheets/hour Max. cutting force: 250 tons Centerline system Isdpfx Aeyly Hyebnjap Quicklock system Non-stop delivery

Condition: used, Automatic Platen Die Cutter Joh. Cietz PRESTO Halbautomatischer Stanztiegel / Automatic Platen Die Cutter Joh. Cietz PRESTO Year 2008 - Serial-No. EP51568 Format 370 x 480mm Weight 1100kgs Included frame and tools Iaodoylqd Aepfx Abnjp Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Nr. 2816, TMZ autoplatine, type QW 161, year of manufacture 2000, equipped with breaking station and package tray. Many spare parts available: gripper carriages, opener rods, chains, gripper bodies, and other small parts. Can be inspected in production, operates flawlessly. €22,000 plus VAT ex-location. Isdoyk E N Dopfx Abnoap

Condition: ready for operation (used), Year of construction: 2019, operating hours: 15 h, machine/vehicle number: MP.DBDO-00198, Size 75 x 106 cm, non-stop function in feeder and delivery, integrated fine adjustment of the cutting plate, motorized die-cutting pressure adjustment, simple operating concept. The basic model is already equipped with all functions and equipment required to start production. Short makeready times, high flexibility thanks to an extended range of materials, accommodates smaller die-cutting tools. Machine number: MP.DBDO-00198, Impressions: 15 million. Iodpfjyhn Uqsx Abnoap

Year of construction: 2008, operating hours: 55,000 h, condition: excellent (used), functionality: fully functional, Heidelberg Dymatrix CSB Year: 2008 Size: 760 x 1060 mm Iodpfxoyf E Ice Abnjap Die-cutting, creasing, stripping and blanking unit Impressions: 290 million Maintenance: All preventive and OEM services carried out Spare parts: some available Condition: very good, in production