ERA GmbH

ERA GmbH from Baden-Baden

Schwerpunkte unseren technischen Qualifikationen sind:

- Schlüsselfertige Technologielösungen
- Optimierungen für die Metallbearbeitung
- Schulungen und technische Unterstützung

Ausgehend von der Zeichnung des Kunden oder dem Musterwerkstück, erarbeite ich auf Basis von Projektvolumen und Budget eine umfassende Lösung für meine Kunden, oder optimiere bestehende Prozesse mit maximaler Wertschöpfung und vorhandenen Produktionsmittel mit minimalen Investitionen.

Das Konzept:

- Kurze Realisierungszeit
- Umfassende Aufgabenlösung
- Gründliche Projektaufarbeitung
- Garantiertes Ergebnis oder Endprodukt
- Die Verwendung von Sonderlösungen
- Genaue nachfolgende Produktionskontrolle auf der Grundlage der Einrichtungsblätter und Bearbeitungszeitkarten
- Anwendung von besten Technologien bei der Umsetzung des Projekts
- Genaue Berechnung der Realisierung des Projektes - seiner Rentabilität

Vielen Dank für Ihre Aufmerksamkeit

_________________________________________________________________________________________________

Технологии „под ключ“

Поставки комплексных технологических решений по металлообработке, автоматизации и машиностроению „под ключ“, с обучением и техническим сопровождением.
Получая от заказчика чертёж или пример заготовки, исходя из объёмов выпуска и бюджета проекта, производится подбор, комплексного решения.
Имея большой опыт и широкие партнерские связи, можем рассмотреть самые различные задачи и готовы предоставить наше решение для вашей проблемы.

КОНЦЕПТ ПОСТАВОК ТЕХНОЛОГИЙ
• Комплексное решение задач
• Глубокая проработка проекта
• Короткое время реализации
• Гарантия на результат или конечный продукт
• Точный расчёт реализации проекта, его доходности
• Точный последующий контроль производства на основании листов настройки и карт времени обработки
• Лучшие европейские технологии в реализации проекта
• Специальные, индивидуальные решения

ПРЕИМУЩЕСТВА

• Значительная экономия при поставке комплексного решения:
- Инструменты входящие в проект поставляются как оснастка 30% экономии
- Цена инструмента в Германии дешевле до 50%
• Последующие поставки инструмента дешевле до 20-25%
• Гарантия на сервисные поставки запчастей через Германию
• Минимальные риски в эксплуатации оборудования
• Обучение персонала по европейскому уровню и стандартам
• Предоставляем сервис по последующему технологическому сопровождению:
- Программирование
- Технологии
- Конструкции
• Значительная экономия средств через использование в проектах оборудования со вторичного рынка.

Благодарим за внимание

Mr Vladimir Timofeev
Quettigstr.12
76530 Baden-Baden
Germany
Baden-Württemberg

Current offers from similar dealers

Listing

CNC turning and milling center Okuma Mac Turn 350 W

Biebrich

7,781 km

CNC turning and milling center
OkumaMac Turn 350 W

Call

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma Mac Turn 350 W, year of manufacture 2004, OSP-E 100L, 80 Ww fac, HSK 63 tool holder, infinitely variable B axis as milling spindle, lower turret with 12 positions and driven tools, Interlite compact filter system 900 l, extraction unit, spindle operating time approx. 18,300 h, chip conveyor, tool changer gripper arm completely renewed, high-pressure coolant system, tool measurement arm, tool changer overhauled, main spindle Kitagawa B - 210, sub-spindle Kitagawa B - 208. Gjdey Atu Topfx Afzjir

See details

Listing

CNC turning and milling center Hyundai Wia LM1800TTSY

Borrby

7,787 km

CNC turning and milling center
Hyundai WiaLM1800TTSY

Call

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Max swing 290mm, max turning diam 230mm, X1 165mm, X2 195mm, Z1 700mm, Z2 720mm, Y 100mm, ZB 668mm, C 0,001dg, Main and sub spindel bore 76mm, bar capcity 65mm, 5,000Rpm. Turret 2 x 12 pos, live tool 5.000Rpm. Fanuc 31i-A, weight 8,500kg. Bar feeder LNS SL80-S. Gjdpfx Ajy Atn Tofzoir

See details

Listing

CNC turning and milling center DOOSAN PUMA TT 2100 SYYB

Borgo San Dalmazzo

8,135 km

CNC turning and milling center
DOOSANPUMA TT 2100 SYYB

Call

Condition: like new (used), Year of construction: 2021, functionality: fully functional, turning length: 700 mm, turning diameter: 230 mm, spindle motor power: 25 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, spindle nose: ASA 6, CNC FANUC TRAVELS X axis: 165 mm Z axis: 700 mm Y axis: 100 mm X2 axis: 165 mm Z2 axis: 700 mm Y2 axis: 100 mm CAPACITY Max turning diameter: 230 mm Max swing diameter: 230 mm Max turning length: 700 mm Max bar capacity: 65 mm MAIN SPINDLE Spindle nose: ASA 6” Spindle speed: 5,000 rpm Spindle motor power: 25 kW SUB-SPINDLE Spindle nose: ASA 6” Spindle speed: 5,000 rpm Spindle motor power: 25 kW UPPER TURRET Number of stations: 12 Live tooling power: 7.5 kW LOWER TURRET Number of stations: 12 Gisdpfx Afey Apcajzjr Live tooling power: 7.5 kW Machine equipped with: • Two high-pressure pumps, 35 bar, with inverter • Linear scales • Two collet chucks as per photos • Basic set of driven and static tool holders • Instruction manuals and CE declaration

See details

Listing

CNC turning and milling center Emco EMCOMAT FB-450 MC

Nördlingen

8,026 km

CNC turning and milling center
EmcoEMCOMAT FB-450 MC

Call

Condition: excellent (used), Year of construction: 2017, operating hours: 13,880 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, Fixed angle table with a clamping surface of 800 x 400 mm. Max. table load approx. 300 kg. Spindle: speed range: 10 – 5,000 rpm (stepless). Drive power: 7 / 10 kW (continuous operation / 40% duty cycle). Tool holder: SK 40 (DIN 69871). Feed: 10 – 2,000 mm/min (rapid traverse up to 5,000 mm/min). Weight: approx. 2,200 kg. Giodpfoy Anhhox Afzer

See details

Listing

CNC turning and milling center Mazak Integrex 200 III ST

Czech Republic

8,350 km

CNC turning and milling center
MazakIntegrex 200 III ST

Call

Condition: good (used), Description: The machine is in good technical condition, with the possibility of testing by prior arrangement. Maximum turning diameter: 660 mm Maximum swung diameter: 660 mm Main spindle: - Speed range: 35–5,000 rpm - Main drive power: 22/15 kW - Maximum torque: 349 Nm - Spindle bore: 76 mm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Sub spindle: - Speed range: 35–5,000 rpm - Power (10 min/continuous): 18.5/15 kW - Maximum torque: 326 Nm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Coolant tank capacity: 300 l Machine power supply: 66 kVA Operating voltage: 400 V / 50 Hz Air pressure: 5 bar, 500 l/min Control system: MAZATROL Fusion 640 MT Flush cooling: - Pump capacity: 20 l/min - Pump pressure: 5 bar Accessories: Gijdpjy Amqzsfx Afzer - Technical documentation - Chip conveyor with coolant - Tool magazine for 20 tools - B axis (positioned at 0.001° increments) - C and Y axes - Sub spindle angular position indexing - Synchronization of main and sub spindle - Tool presetting system (Tool Eye) - Front door locking - 20-position tool magazine - Complete cooling system - Interface for IC memory card

See details

Clickout

Heavy Duty Twin Pallet Horizontal Machin Doosan HM1000

Dunfermline

6,805 km

Heavy Duty Twin Pallet Horizontal Machin
DoosanHM1000

37 days left

Details

Condition: used, Year of construction: 2009, Doosan HM1000 Heavy Duty Twin Pallet Horizontal Machine Centre. S/No HM10000080 (11/2009) with Fanuc 31i model A Control, Pallet size 1000mm x 1000mm, Travels X = 2100mm, Y = 1250mm, Z = 1250mm, Big Plus Spindle BT50, Spindle speeds 20 – 6000rpm, RUCKLE Full ‘B’ axis, Max Table load 5000kg (upgrade capacity), ATC Carousel 90 positions, U Axis fitted to Spindle for D-Andrea Heads, Renishaw TS27R Tool Probe, Renishaw RMP 60 Spindle Probe, Qty of BT50 Toolholders (Backend only), Screw Drive Swarf Conveyor, Filtermist, Main Spindle refurbished in 2020, Machine Weight 29,000kgs Gijdpfx Ajy Amg Asfzjr Location: These lots are located in Dunfermline, Scotland, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

See details

Listing

CNC turn-mill center DOOSAN Puma 2600SY II mit Siemens

Germany

7,694 km

CNC turn-mill center
DOOSANPuma 2600SY II mit Siemens

Call

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control; Thermal sensors for highest precision; Y-axis; Sub-spindle with collet chuck; Spindle bore 80 mm (main spindle); All axes are flat guideways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders. Giodpfx Ajy Amflefzjr

See details

Listing

CNC turning and milling center HAAS ST-10

Brno-město

8,348 km

CNC turning and milling center
HAASST-10

Call

Condition: good (used), Year of construction: 2019, In good technical condition and fully functional. Year of manufacture: 2019 - Max. turning diameter: 220 mm (for standard turret) - Max. turning length: 356 mm - Chucking diameter over bed: 641 mm - Chucking diameter over cross slide: 413 mm - X/Z-axis travel: 200 / 356 mm - Rapid traverse X/Z-axis: 30.5 m/min - Spindle size: A2-5 - Max. power: 11.2 kW, spindle drive: vector drive Gedpey Alv Asfx Afzoir - Max. torque: 102 Nm - Max. spindle speed: 6,000 rpm - Bar capacity (spindle bore): 44 mm - Automatic hydraulic chuck: 165 mm - 12-position tool turret VDI40 (option BOT or hybrid) - Option for driven tools and C-axis on spindle - Coolant tank: 114 l with pump - Electrical connection: 3x400 V / 50 Hz, 14 kVA - Machine weight: 3,450 kg

See details

Auction

CNC turning and milling center Mazak Integrex e-500 HS U1500

Rheinland-Pfalz

7,755 km

CNC turning and milling center
MazakIntegrex e-500 HS U1500

€50,000

To the auction

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel X-axis: 870 mm Travel Y-axis: 500 mm Travel Z-axis: 1,598 mm Giodpfxjy Akpno Afzer Main spindle Max. spindle speed: 3,300 rpm Main spindle drive power: 30 kW / 22 kW Max. torque main spindle: 588 Nm Main spindle nose: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Sub spindle Max. spindle speed: 3,300 rpm Sub spindle drive power: 30 kW / 22 kW Max. torque sub spindle: 588 Nm Sub spindle nose: A2-11" Indexing: 0.0001 Milling spindle Milling spindle drive power: 37 kW Max. torque milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min MACHINE DETAILS Control: Mazatrol 640M PRO Tool holder: SK50 Number of tool stations: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required floor space (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Infinitely variable speed adjustment 120-position tool magazine High-pressure coolant 70 bar Renishaw Laser measuring system for rotating tools Interface set Air / water cooling through the spindle Overload monitoring system Mayfran Consep 2000 chip conveyor SMW quick-change chuck

See details

Listing

Turn-milling center with C-/Y-axis HAAS ST 30 SSY

Porta Westfalica

7,717 km

Turn-milling center with C-/Y-axis
HAASST 30 SSY

€39,900

FCA Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2015, HAAS ST 30 SSY Turn-Mill Center Year of manufacture: 2015 HAAS control Machine number: 3102813 ONLY approx. 9,950 operating hours (as of 25.03.2026) Equipment: Turn-mill center with C-/Y-axis Travel distances: max. 406 mm x 584 mm Swing diameter: 806 mm Y-axis travel: ±50.8 mm Vector drive (22.4 kW) A2-6 spindle, 4,500 rpm 10-inch chuck (254 mm) Hybrid turret with 24 tool positions (12 VDI / 12 BOT) Driven tools with higher torque, C-axis 15" color LCD monitor Memory lock key switch Spindle orientation USB port Synchronized tapping Automatic tool presetting system Hinged belt chip conveyor Parts catcher Programmable hydraulic tailstock Ethernet interface "Visual Quick Code" programming system Giedpfx Asy Akn Djfzsr VectorCam Turning Special Haas Edition HAAS bar feeder Ø 76 mm Hainbuch collet chuck combo Axzug size 80 Chip shield for GR80 Vario Quick-standard end stop system size 80 Included in delivery: BOT/VDI holders/turret Turning tools Hainbuch collets Collets for tools Driven tools Tool cabinet with swing doors Machine leveling elements Chip trolley Operating manual/documentation Machine parameters on USB stick Equipment, technical data, manufacturer brochure and machine layout – see PDF. Illustration, content and specifications provided without guarantee and therefore non-binding. All other accessories visible in the photos and video are not included in the scope of delivery and are not part of this sale. The scope of delivery covers only the accessories expressly specified here, in the order confirmation, and on the invoice. FCA (Free Carrier, loaded on truck) D-32457 Porta Westfalica packaging only Delivery time: immediate Subject to prior sale / payment due immediately upon conclusion of purchase

See details

Listing

Machining center Willemin-Macodel SA Model 308B

Oak Forest

851 km

Machining center
Willemin-MacodelSA Model 308B

Call

Condition: excellent (used), Year of construction: 2014, Willemin-Macodel SA Model 308B 5 Axis Machining Center Mfd. 2014 X 160 mm Y 120 mm Z 150 mm # Axis 5 Power 7 hp RPM 30,000 RPM # ATC 28 Taper HSK E32 Willemin-Macodel SA Model 308B 5 Axis Machining Center (2014) X1 6.300" Y1 4.720" Z1 5.910" A1 360.000° B1 130.000° Gisdpfx Aey Abcxjfzsr Taper HSKE32 Rapid Feeds 1,181ipm Equipped With 5 Axis 28 Position ATC 30000 RPM Pallet Recognition Fire Protection Auto Fire Suppression Filter Mist Extraction

See details

Listing

CNC Turning and milling center Nakamura-Tome NTJX

Lüneburg

7,734 km

CNC Turning and milling center
Nakamura-TomeNTJX

Call

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm Gedoyz Unlopfx Afzoir spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

See details

Listing

CNC turning and milling center Hwacheon Hi-Tech 230BL-YSMC

Brigachtal

7,957 km

CNC turning and milling center
HwacheonHi-Tech 230BL-YSMC

Call

Listing

CNC turning and milling center DMG MORI CTX alpha 500

Vicenza

8,311 km

CNC turning and milling center
DMG MORICTX alpha 500

Call

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,728 h, functionality: fully functional, machine/vehicle number: 0040001634C, turning length: 500 mm, turning diameter: 240 mm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 525 mm, The DMG MORI CTX Alpha 500 was manufactured in 2022. This versatile turning center is equipped with a Siemens controller and LNZ Quick load servo 80S2. Weight: 4,300 kg. Please contact us for more information about this machine. Giodoyz S T Sepfx Afzsr

See details

Listing

CNC Lathe c-axis MAZAK QUICKTURN 250-IIM Mazak QUICKTURN NEXUS 250-IIM

Babberich

7,577 km

CNC Lathe c-axis MAZAK QUICKTURN 250-IIM
MazakQUICKTURN NEXUS 250-IIM

Call

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Make: MAZAK Gedpoyz Stljfx Afzsir Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Year: 2008 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

CNC turning and milling center Gildemeister TWIN 32

Sobótka

8,232 km

CNC turning and milling center
GildemeisterTWIN 32

€15,000

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, DMG Gildemeister TWIN 32 with Y-axis Technical data: Year of manufacture: 2000 Main spindle: Speed: 8,000 rpm Max. torque: 100 Nm Max. power: 26 kW C-axis: 0.001° Spindle bore: 32 mm Clamping cylinder: through-hole cylinder Chuck: Hainbuch chuck Sub spindle: Speed: 8,000 rpm Max. torque: 100 Nm Max. power: 26 kW C-axis: 0.001° X-axis travel: 145 mm Z-axis travel: 380 mm Clamping cylinder: semi-through cylinder Chuck: Hainbuch chuck Turret head no. 1: Number of stations: 12 pcs Tool holder: VDI 25 Driven tools: 6,000 rpm X-axis travel: 220 mm Gedpjyz Sp Hofx Afzeir Y-axis travel: 60 (+/- 30) mm Z-axis travel: 320 mm Turret head no. 2: Number of stations: 12 pcs Tool holder: VDI 25 Driven tools: 6,000 rpm X-axis travel: 120 mm Z-axis travel: 345 mm Equipment / accessories: Chip removal: chip conveyor Parts catcher: gripper + step conveyor Machine data: Control: Sinumerik 840 D The machine geometry has been checked and set (videos of the geometry setup available upon request). Linear guides on Z3-axis have been replaced. The machine is fully functional, on-site testing possible as it is connected to power. Machine data backups have been performed.

See details

Listing

CNC Turning- and Milling Center GILDEMEISTER MF TWIN 65-II

Germany

7,804 km

CNC Turning- and Milling Center
GILDEMEISTERMF TWIN 65-II

Call

Condition: used, Year of construction: 2011, Technical details: weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. Giodpfxoyz Sdqj Afzjr *

See details

Auction

CNC turning and milling center Mori Seiki NL 2500 / 700

Norway

7,195 km

CNC turning and milling center
Mori SeikiNL 2500 / 700

€15,000

To the auction

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,858 h, functionality: fully functional, turning length: 705 mm, turning diameter: 275 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, controller model: MSX-850III, TECHNICAL DETAILS Travel X-axis: 260 mm Travel Z-axis: 795 mm Turning length: 705 mm Max. turning diameter: 275 mm Swing over bed: 923.8 mm Swing over cross slide: 755 mm Bar work capacity diameter: 80 mm Upper turret Number of tool stations: 12 Main spindle Spindle speed: 4,000 rpm Spindle drive power: 18.5/18.5/15 kW (10 min/30 min/cont) Spindle nose: JIS A2-8 Tailstock Tailstock travel: 734 mm Taper: MT5 MACHINE DETAILS CNC control: MSX-850III Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,922 x 2,120 mm Weight: 5,800 kg Operating Hours Main spindle hours: 3,858 h Power-on hours: 21,543 Godpfoyz Aq Iox Afzoir EQUIPMENT Chip conveyor Tool measuring arm

See details

Listing

DMG MORI CTX Alpha 500 V6 DMG MORI CTX Alpha 500 V6

Germany

7,824 km

DMG MORI CTX Alpha 500 V6
DMG MORICTX Alpha 500 V6

Call

Condition: ready for operation (used), Year of construction: 2021, operating hours: 14,400 h, spindle motor power: 13,000 W, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: 840D with ShopTurn 3G, number of axes: 3, This 4-axis DMG MORI CTX Alpha 500 V6 was manufactured in 2021. A versatile turn-mill centre featuring a Siemens 840D controller, ERGOline interface, and CELOS manufacturing support. It offers a 470 mm machining length, 6000 rpm max speed, and a 12-position Sauter turret with live tooling. Ideal for complex machining tasks. Contact us for more information about this machine. Additional equipment • CELOS Products • DMG MORI Service Agent • DMG MORI NetService • DMG MORI IoT Connector • DMG MORI Messenger V2 SERVICE Camera • Tail Stock • the 2 SMW-Autoblok BBD17/52 which can also be seen on the machine chuck. • and the addition of the software (tccentric turning and milling cycle, as well as a deburring toothing cycle). Machine Benefits Technical Machine Benefits • Hydraulic cylinder with Ø52 mm through-hole • 12-position sauter turret • Vdi 30 tool mounting (din 69880-30) • Live tool interface (din 5480 standard) Gsdpfxjyz Al So Afzeir • Direct measuring scale on the x-axis • Tool system for turret: trifix® system (din 69880, vdi 3425, din 5480) • Y-axis: ±40 mm travel Extra Information Main Spindle Chuck SMW-Autoblok BBD 170/52 Counter Spindle Chuck SMW-Autoblok BBD 175/52 Counter Spindle Option Programmable tailstock force: Adjustable between 80-300 daN Media Coolant filtration: Dual-cartridge filter (50 μm) Coolant cleaning: External flushing system for spindles Coolant tank with 6-bar pump Automation Bar machining package: Fully hydraulic cylinder Ø52 mm Workpiece catcher with conveyor for parts Ø51 × 185 mm (max 3 kg) 4-color operating mode signal light Bar loader interface compatible with IEMCA, Breuning IRCO, LNS

See details

Listing

CNC turning and milling center Takisawa TT-1100G

Euskirchen

7,693 km

CNC turning and milling center
TakisawaTT-1100G

Call

Condition: excellent (used), operating hours: 2,333 h, functionality: fully functional, machine/vehicle number: TJLU9012, TT1100G, 2021 – only 2,333 operating hours. Technically well maintained. Price: negotiable. On-site viewing by appointment possible. Sold from location. If interested or for more photos/details please contact. Giodpfx Ajyzzrdefzor

See details

Listing

CNC Turning- and Milling Center DMG MORI NLX 2000SY/500

Monheim am Rhein

7,669 km

CNC Turning- and Milling Center
DMG MORINLX 2000SY/500

Call

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Technical details turning diameter 356 mm turning length 510 mm control M 730 BM travel -x axis 260 mm travel -y axis -50 / +50 mm travel -z axis 590 mm Travel subspindle (B) 624 mm bar material dia. 65 mm main spindle speeds: 5000 transmission ratio 2 power capacity 15 / 11 kW Subspindle spindle speeds 6000 power capacity 11 / 7,5 kW rapid traverse (X,Y,Z,B) 30/10/30/30 m/min weight of the machine ca. 6,6 t Additional information * CNC control Mitsubishi M 730 BM * Mainspindle with 3-jaw power chuck KITAGAWA N-08, diameter 210 mm * Subspindle with 3-jaw power chuck HAINBUCH B-TOP 165-43 * 12-station turret, tool spindle speed 10000 rpm, power 5.5/3.7 kW * Y-axis travel * C-axis * High/low pressure chuck system for main and subspindle * MABEO high-pressure pump with 1.5 MPa filter unit * Coolant sprayer on the chuck for main and subspindle * Coolant sprayer for the machine bed cladding Giodpfx Afeyzzi Nezer * Oil mist separator * Chip conveyor * Renishaw workpiece measuring system with optical signal transmission, subspindle * Cooling of the ball screw in the X-axis * Gantry loader, left-hand installation, 14-station storage, 20-pallet workpiece storage, Double gripper conveyor

See details

Listing

Monheim am Rhein

7,669 km

CNC Turning- and Milling Center
GildemeisterTWIN 32

Call

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC turning and milling centre with Y-axis, 2 turrets, subspindle and bar feeder. A total of over 44,000 EUR has been invested in necessary repairs and maintenance over the last 5 years by DMG MORI (replacement of the main spindle S4, ball-screws, etc.). Gedpoyzzhrefx Afzeir Technical details turning diameter 100 mm turning length 320 / 345 mm swing diameter 145 mm spindle distance 580 mm slide I - cross travel (X1) 220 mm slide I - longitudial travel (Z1) 320 mm y-axis +/- 30 mm rapid traverse (X/Y/Z) 30/15/30 m/min slide II - cross travel (X2) 120 mm slide II - longitudial travel (Z2) 345 mm rapid traverse (X/Z) 30 m/min Travel subspindle (Z3) 380 mm vertical stroke (X3) 145 mm bar material dia. max. 36 mm rapid traverse (X/Z) 20/30 m/min power capacity (40/100 % ED) 26/21 kW spindle turning speed range 40 - 7200 rpm total power requirement 42 kVA weight of the machine ca. 5,3 t Equipment: - SIEMENS 840 D powerline CNC control - Number of controlled axes: 9 - 2 x C-axis - Y-axis in upper turret - Pick-up device with gripper - 2 SAUTER turrets with 12 tool positions (driven), VDI 25 - Tool drive with a speed range of 30 to 6000 rpm - Coolant system with paper band filter - Chip conveyor - Collet chuck on main and subspindle - Bar loading magazine, make: IEMCA BOSS 332 E 32 L, max. bar length 3180 mm

See details

Listing

CNC Turning- and Milling Center DOOSAN PUMA MX 2600 ST

Monheim am Rhein

7,669 km

CNC Turning- and Milling Center
DOOSANPUMA MX 2600 ST

Call

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Technical details turning diameter 760 mm turning length 1540 mm control Fanuc 31i-B dimensions of machine 5500 x 2700 x 3110 mm chip conveyor 6900 x 2400 mm total power requirement 94,42 kW weight of the machine ca. 15,5 t Additional information Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Godpfxeyzzf Rj Afzjir Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Spindle speed: 4000 rpm AC motor power (cont./30 min.) 22/26 kW Turning/milling head B-axis rotation / indexing 240 deg. (±120 deg.) Tool holder Capto C6 Speed in revolutions per minute 12000 rpm AC motor power 30 min. 15/18.5 kW Number of tools 40 (Opt. 80) Tool turret Number of driven tools 12 (12)

See details

Listing

CNC Turning- and Milling Center Mori Seiki NT 4300DCG/1500SZ

Monheim am Rhein

7,669 km

CNC Turning- and Milling Center
Mori SeikiNT 4300DCG/1500SZ

Call

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Gsdpoyzzcpofx Afzsir Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

See details

Listing

CNC Turning- and Milling Center OKUMA LB400M-1SC

Monheim am Rhein

7,669 km

CNC Turning- and Milling Center
OKUMALB400M-1SC

Call

Condition: good (used), Year of construction: 2000, functionality: fully functional, Technical details: turning diameter 420 mm turning length 650 mm Godoyzy Ukspfx Afzeir control Okuma OSP-U100L spindle bore 95 mm spindle turning speed range 2800 U/min travel -x axis 300 mm travel -z axis 675 mm main drive motor 22/30 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 2700 x 1900 x 1885 mm Additional information First put into operation 2001. Spindle hours: 16.653 hrs. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor (scraper)

See details