J. E. Wolfensberger AG

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. Fjdpfx Ajztz D Ujdpopk After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: good (used), Drossert ST 3B Cauhe Die cutting machine The machine is fully operational, ready for production. Weight 3500kg Power supply 380V Production under the Drossert Maschinenbau GMBH Germany brand by the Cauhe factory in Spain. Equipment: – pneumatic clutch and brake – console Fodpfjztpa Rox Adpepk – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety covers – hard sheet metal for pressure

Condition: new, ML-1400 NXL die cutter The machine is brand new. It is the heaviest die cutter in this format. Fpsdpfjztn Rusx Adpok Format: 1400 × 1000 mm Weight: 6500 kg 380 V power supply Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in EU. Possibility of testing in the showroom in Radom.

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Fedpfxjztn Rnj Adpspk Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container. Fodpfx Adjztn N Rspjpk

Condition: new, Die cutting machine ML-2000 NXL Fedpfeztn Nwsx Adpepk The machine is brand new. It is the heaviest weightlifting machine in this format. Format: 2000 × 1400 mm Weight: 14000 kg 380 V power supply Engine: 15 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – pneumatic lifting system of the sheet on the pressure – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in Europe.

Condition: new, Die cutting machine ML-1800 NXL Brand new machine. This is the heaviest die in this format. Format: 1800 × 1280 mm Weight: 12,500 kg 380 V power supply Engine: 11 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication Fpedpfoztn Nqex Adpok – pneumatic sheet lifting system on the clamp – additional safety guards and pressure safety mats – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Poland. Possibility of testing in the showroom in Radom.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells Fodpfxsztn Nko Adpjpk – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening Fjdoztn I Hepfx Adpspk – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks. Fpodpfx Ajztn Iyodpok

Year of construction: 2000, condition: repair required (used), functionality: limited functionality, Plate cylinders: z68, z74, z80, z85, z96, z101, z104, z114, z116, z120, z136 Cliché cylinders: z68, z74, z78, z80, z85, z85, z96, z101, z104, z114, z120, z136 Anilox rollers: 400x3.5, 4 pieces 320x4, 1 piece 280x5, 1 piece Fodpfezqr H Uox Adpjpk 200x6, 1 piece 140x8, 2 pieces 100x10, 1 piece Gapmaster 2 rewinders, one of which needs repair.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual Fpodpfx Ajzph N Aodpek – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Year of construction: 1990, condition: used, functionality: fully functional, We offer this used BCS COMPUTERS CP 801-x film edge perforation machine for plotters, manufactured in 1990. Manufacturer: BCS COMPUTERS Model: CP 801-x Year of manufacture: 1990 Fpedpoznt Unjfx Adpjk Condition: used Category ID: 16 Machine type: Film edge perforation machine for plotters CP801-x always hits the mark precisely. Inaccuracies during punching can have serious consequences for your product. The cutting plotter no longer works properly, leading to unpleasant problems… The CP801-x punching machine puts an end to this! This punching machine guarantees the highest punching accuracy and the sharpest hole edges. This ensures faithful processing in the CadCam cutting plotter. The CP801-x produces ten different perforation patterns with a maximum diameter of up to 6 mm. With the same tools, it is also possible to punch elongated holes along the length of a roller, for example. The desired pattern can be adjusted with a simple finger movement. The CP801-x does this in no time! The CP801-x punching machine offers numerous advantages. For example, the maximum length tolerance is only 0.2%. And not to forget the variable width setting. It is also equipped with an automatic length section. Another highly interesting advantage is the rapid amortization of the machine due to high punching rates: up to 300 m/hour. Intelligent software makes the machine particularly user-friendly. The extremely simple and easily accessible control panel requires only basic knowledge. If you have any questions or require more information, please send us a message or call us.

Year of construction: 2025, condition: like new (used), VeloBlade DF0906-MT Automatic Digital Cutting System – As New We are offering this VeloBlade DF0906-MT automatic digital flatbed cutting system in as-new condition. Manufactured in March 2025, the machine provides a generous 900 × 600 mm active cutting area and is designed for the efficient production of packaging, point-of-sale materials, labels, stickers, business cards, invitations, prototypes and other short-run digitally finished products. The automatic sheet-feeding system, conveyor cutting bed, vacuum material hold-down and camera registration system allow jobs to be processed accurately with minimal operator intervention. Depending on the tooling fitted, the machine can be used for cutting, kiss-cutting, creasing, perforating and processing a wide range of flexible and rigid substrates. This makes the VeloBlade DF0906-MT particularly suitable for commercial printers, packaging producers, sign makers and businesses looking to bring short-run digital cutting and finishing in-house without the cost or lead time associated with conventional cutting dies. ### Machine specification * Manufacturer:VeloBlade * Model: DF0906-MT * Year of manufacture: 2025 * Production date: March 2025 * Active cutting area: 900 × 600 mm * Voltage: 220 V * Frequency: 50 Hz * Power: 4.85 kW Fpsdpfx Adjznma Dopok * Required air pressure: 0.5–0.8 MPa * Overall dimensions: 2,620 × 1,380 × 1,480 mm * Gross weight: 467 kg * Serial number: DF251003S008A140 * Condition: As new A versatile and highly productive digital finishing system, ideal for automated short-run and on-demand production. Please contact us for further information, additional photographs, videos, pricing or to arrange an inspection.

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal Fpjdszmu I Topfx Adpek

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Fodpozmu I Hefx Adpepk Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Year of construction: 2022, operating hours: 9,500,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 4131.05/22, -Bograma BSR 550 Servo with pallet feeder -Cylinder heater Fedpjzl Skpjfx Adpjpk -Registration mark reader -Interface box for controlling an external vacuum valve -Stack delivery STA 550BK for a maximum of 9 sheets -Performance: 12,000 sheets/hour, 165 m/min -Minimum format: 210 x 297 mm -Maximum format: 550 x 750 mm

Condition: like new (used), Year of construction: 2011, MBO F 530 flat-pile feeder Bograma BSR 550 Fsdszl Hlbjpfx Adpjpk UEB 550 breakout station 850 transfer unit 701 shingle delivery system, extended version

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Fsdpfx Aozlgf Iodpepk Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication Fpodozlaitopfx Adpsk – Additional safety guards – Operating tools – Press plate

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. Fpodozlahispfx Adpjk The machine is ready for operation, after a service inspection. Format: 720 x 510 mm Weight: 1800 kg Power supply: 380 V Motor: 2.2 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication – Safety guards – Operating tools and instructions with documentation.

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame Fjdpfoziytmsx Adpepk – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: excellent (used), WSK Intermarking Fritz Wagner Type 1164 – hot stamping / foil gilding machine Fpsdpfoziqtdjx Adpok

Condition: ready for operation (used), very good condition Fodpezgdcmjfx Adpopk available immediately 54x72 size

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Fjdpfozgc U Uox Adpepk Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.