Lqmaq

Condition: good (used), workbench, work table, assembly bench -Width: 1530 mm -Depth: 800 mm Fgedpfx Ajzzqqgokxeg -Height: 860 mm -Weight: 110 kg

Year of construction: 2003, condition: ready for operation (used), This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us. Additional equipment • Scaffolding with cladding • Work tank // Flood tank 1 // Condensate tank // Flood tank 2 • Continuous distillation • Automatic sliding door • Water separator • Bogie without cover • Storage with drive • Drying cooler • Vacuum unit - drying process // Vacuum unit // Vacuum filling/emptying device • HD - IFW Circulation filtration including chip rinsing • 6 baskets included Machine Benefits Technical Machine Benefits • Control panel • Ultrasound (1 rod transducer) • Heating fb2 • Hgz 028 cooling unit • Reinforced cooling (hgz 064 cooling unit and cooling coils in fb1, fb2, desti. ) • Filling/emptying device for fb2 • Dummy for fb2 • Preservation equipment • Single filter for fb1 // filtration for fb2 Fgjdpfxezzn Hxj Akxjg • Automatic feeding Extra Information Machine still under power

Year of construction: 2020, condition: used, Bar length: 3000mm, max. bar diameter: 80mm, operating cycle: fully automatic, monitoring and fault diagnostics: via display, part length: presettable, feed control: AC servo motor, bar diameter: adjustable via PLC keypad in 1mm increments, remnant extraction: to the rear or ejection to the front, guide channels: Vulkollan plastic, usable magazine width: approx. 900mm, control: integrated PLC, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Fgodpfx Aszzdyhskxsg

Year of construction: 2023, operating hours: 1,008 h, condition: ready for operation (used), Machine tool manufactured in 2023. This ECOKRAFT LP 22 features a power rating of 22.5 kW and a material bunker capacity of 4 m³. It includes a drum screen with dimensions of Ø 300 mm x Length 1,200 mm and a conveyor belt with a length of 3,600 mm. If you are looking to get high-quality processing capabilities, consider the ECOKRAFT LP 22 machine we have for sale. Contact us for further details. Fgjdpfezza Axsx Akxjg - Machine Type: Pellet Plant / Pellet Press Line- Power Rating (Cutting Mill): 22.5 kW- Material Bunker Capacity: 4 m³ (with discharge)- Material Container Automatic Operation Capacity: 4 m³ (discharge via conveyor belt)- Operating Hours (from HMI readout):- Power On Time: 3795 h- Total Press Run Time: 1008 h- Current Press Run Time: 1008 h- Removal Conveyor: 1158 h- Screening System: 1158 h- Water Pump: 609 h- Bunker Conveyor: 259 h- Bunker Discharge: 230 h- Bunker Agitator: 201 h- Cross Conveyor: 0 h- Drum Screen Dimensions: Ø 300 mm x Length 1,200 mm- Drum Screen Discharge Height: Max. 1,800 mm (variable height adjustment, side filling right/left)- Conveyor Belt Specifications: Length 3,600 mm, Discharge Height 2,600 mm, Belt Width 150 mm, Number of Cleats: 49, Motor Speed 46 rpm- Big-Bag Frame Vario 1.0: Suitable for size 95x95x100 cm (1.0 m³)- Big-Bag Frame Vario 1.5: Suitable for size 95x95x150 cm (1.5 m³)- Optional Equipment & Features:- Pellet Press LP22- Load-dependent feed control- Rotary valve- Frost-proof control panel with touchscreen interface- Remote maintenance and fault analysis module- SMS module- Temperature monitoring and control for press room- Manual potentiometer for material flow regulation- Pressol pneumatic grease system (for 18 kg bucket)- Control cabinet with VFD for LP22 connection- Cable set for automatic operation- Level sensor

Condition: excellent (used), Year of construction: 2024, OPERATING RANGE V807M Min. / max. height 10 – 460 mm Min. / max. width 50 – 1.140 mm Max. positioning weight 15.000 kg Max. operating width bottom side 1140 mm 1 Bevel angle + / - 50° Minimum automatic infeed length 1900mm Minimum automatic outfeed length Approx. 1400mm 2 1 Applicable to bottom side marking and square tube cutting. 2 1400mm automatic outfeed with at least one 1900mm part in the nesting. OPERATING SPEEDS Fodpfx Aezy Sqfekxegg Max. speed X-axis (measuring system) 60 m/min Max. air speed robot 11.6 m/sec Max. speed additional rotational axis 90 ͦ /sec ROBOT ACCURACY Repeatability ±0.04mm Absolute accuracy ±0.25mm MEASURING ROLL SYSTEM Max. speed 60 m/min Diameter measuring rolls 170 mm PLASMA CUTTING UNIT XPR300 CORE Min. thickness 3 mm Max. thickness 80 mm Max. pierce capacity 45 mm Dross-free cutting max. 38 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,5% pure clean, dry, oil-free) Marking Nitrogen gas Shield gas mild steel O2 and Air (ISO 8573-1:2010 Class 1.4.2) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.036 mm / min 130A 12 mm Approx. 3.061 mm / min 170A 25 mm Approx. 1.950 mm / min 300A 30 mm Approx. 1.530 mm / min 300A 40 mm Approx. 940 mm / min 300A 50 mm Approx. 560 mm / min 300A 80 mm Approx. 165 mm / min 300A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes.

Condition: used, Year of construction: 2009, 2009 HGG Profiling Equipment PLC 600 Plasma CNC Profile Cutting Line with Procam Software Cutting Capacity Pipe Range Ø48-Ø610mm. Maximum Cutting Angle 45°. Maximum Pipe Weight 3 Ton. Note: Hard Drive Has been Removed For Sale, Replacements Are Readily Available From HGG. With Fume Extraction Unit, Safety Light Curtain Guards & Signal Tower. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site. Fgedpfx Aozy Itvokxjg Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site.

Condition: excellent (used), Chip extractor Manufacturer: Ringler Connection hose: 60 mm Voltage: 380 volts Height: 1900 mm Fgodpfjzy Hwajx Akxsg Depth: 950 mm Width: 750 mm

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz Fgedpfxezytmze Akxjg - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: ready for operation (used), Schunk Tribos SVP2 Clamping Device – Quick-Change System You are welcome to visit us for a demonstration. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. Fgsdpszyrczefx Akxjg The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Year of construction: 2009, condition: used, functionality: fully functional, Professional electrically operated gutter forming machine designed for continuous production of half-round or angular gutters from coil material. Suitable for steel, aluminium and copper. The machine forms gutters directly from metal strip and is suitable for roofing, sheet-metal and rainwater system production. Fgjdpfx Akezyly Hjxeg Technical specifications: Gutter type: half-round or angular Available gutter sizes: 125 mm and 150 mm (5" and 6") Material: galvanized/painted steel, aluminium, copper Steel thickness: 0.50–0.57 mm Copper: 16 oz Strip width: 298–381 mm Production speed: up to 16 m/min Electrically operated Continuous roll-forming process Robust industrial construction Advantages: Fast and efficient production with consistent gutter profile and dimensions. The machine is suitable both for workshop production and professional gutter manufacturing operations. Condition: Used, fully operational. Location: Latvia.

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, Oven for powder coating, with internal dimensions of 8200x1600x3600. Fgodpfx Ajzylxcokxsg Gas burner with a power output of 125-390 kW.

Condition: used, Year of construction: 2012, functionality: unexamined, GERIMA SMA 50P portable beveling/edge preparation machines for sale. Quantity: - 2 units Main specifications: - Manufacturer: GERIMA - Model: SMA 50P - Year: 2012 - Portable beveling/chamfering machines - Suitable for metal edge preparation and beveling applications - Supplied in transport cases - Inserts/accessories included, as shown in the photos Used equipment, sold as-is. Condition and completeness are shown in the photos. Fgodpfx Akezyah Sjxsg The listed price is for both units. Individual sale can also be arranged. Location: Estonia. Loading/collection: Forklift/pallet handling capability available on-site. Transportation is at the buyer’s expense.

Year of construction: 2022, condition: new, functionality: fully functional, Automatic press loading – double infeed unit + 5-axis manipulator Complete automation solution for the automatic feeding, loading, unloading, and transfer of sheet metal parts in mechanical and hydraulic presses. The installation consists of a QF-LJZ600 double infeed/stacking unit in combination with a QF-5045-S6-5 5-axis manipulator with a 5 kg load capacity. This combination is ideally suited for automating existing presses and can be used for, among other things: • Automatic loading of a mechanical or hydraulic press as an alternative to manual loading • Automatic unloading of the pressed product • Unmanned or operator-assisted production • Transferring a product from one press to a subsequent press • Pick & place applications • Turning and repositioning products • Stacking finished products • Automating multiple consecutive pressing operations Fgjdpfozx T Dqex Akxeg Double infeed/stacking unit, type QF-LJZ600 Automatic double-station system for feeding individual sheet metal parts/blanks to the manipulator. Key specifications: • Type: QF-LJZ600 / QFLJZ600×600 • Design: double station • Maximum sheet size: approx. 600 × 600 mm • Minimum sheet size: approx. 60 × 100 mm • Stack height: approx. 300–500 mm • Maximum load capacity: approx. 1,600 kg • Positioning accuracy: ± 0.2 mm • Production speed: up to approx. 12 cycles/minute, depending on the product and application • Connection: 380 V, 3-phase, 50/60 Hz • Power: approx. 2 kW • Suitable for, among others, steel, aluminum, and copper The dual-station design allows a new stack of material to be prepared while production continues from the other station, thereby minimizing downtime during material changes. 5-axis press manipulator, type QF-5045-S6-5 Servo-driven manipulator, specially designed for automating pressing operations. Key specifications: • Type: QF-5045-S6-5 • 5 servo-driven axes • Maximum load capacity: 5 kg • Equipped with fixture/vacuum pad/gripper • Programmable movements and trajectories • Absolute servo systems with position memory • Positioning accuracy: approx. ± 0.2 mm • Production speed: up to approx. 15 cycles/minute, depending on the application • Different products and movements can be programmed • Suitable for various gripping systems, including vacuum, pneumatic, and magnetic grippers Application for unmanned press production The installation can be integrated with an existing mechanical or hydraulic press. The sheet metal parts are automatically fed from the stack. The 5-axis manipulator picks up the product, positions it in the press, and can automatically remove the product after the pressing operation. Depending on the application, this can be used to create a fully automated or operator-assisted production cell. A possible configuration is, for example: Sheet stack → double infeed unit → manipulator → press → finished product Transfer from press to press Another interesting application is automating a production process with two or more existing presses. The manipulator can remove a product after the first pressing operation and automatically position it in a second press. General The installation was newly purchased in 2022 but has not been used. The installation is offered as a combination of an infeed/stacking unit and a 5-axis manipulator.

Condition: new, functionality: fully functional, Hydraulic alligator shear – 250 kN -> €4,400.00 Hydraulic alligator shear for professional cutting of metal and scrap. Robust steel construction, high cutting performance, and reliable continuous operation. With a maximum shearing force of 250 kN, a shearing frequency of 10–15 cuts/min, and a maximum blade opening of 160 mm. Shearing length 300 mm, drive power 5.5 kW. Ideal for scrap yards, recycling, metal processing, and industrial applications. Fgjdezx S Axepfx Akxeg Technical data: Shearing force: 250 kN Shearing frequency: 10–15 cuts/min Operating pressure: 15 MPa Blade opening: max. 160 mm Shearing length: 300 mm Motor power: 5.5 kW Dimensions: 1,200 × 980 × 1,200 mm Cable stripping machine GM-918KOF Cable stripping machine GM-918KOF -> €1,390.00 High-performance cable stripping machine for efficient processing of copper and aluminum cables. The GM-918KOF impresses with its robust design, easy operation, and a processing speed of up to 30 m/min. Suitable for cable diameters from 1.5 to 50 mm. With a 3 kW motor and mobile design, it is ideal for workshops, scrap dealers, recycling plants, and electricians. Technical data: Performance: up to 30 m/min Motor power: 3 kW Cable diameter: 1.5–50 mm Dimensions: 700 × 560 × 860 mm Weight: 116 kg Cable stripping machine GM-120-2 Cable stripping machine GM-120-2 -> €2,600.00 Professional cable stripping machine for fast and clean processing of thick copper and aluminum cables. The GM-120-2 processes cables with a diameter of 1–120 mm and is particularly suitable for large quantities of cables and industrial applications. With a 2.2 kW drive and 9 + 2 blades, it enables efficient and precise cable processing. Technical data: Motor power: 2.2 kW Cable diameter: 1–120 mm Blades: 9 + 2 pieces Suitable for: Copper and aluminum cables Application: Recycling, scrap yards, cable processing, and industry

Year of construction: 2010, condition: ready for operation (used), travel distance X-axis: 120 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 200 mm, controller manufacturer: SIEMENS, controller model: 840D SL, number of axes: 5, This 5-axis DMG ULTRASONIC 10/ DENTAL 10 was manufactured in 2010, featuring a universal machining center with X/Y/Z travels of 120/120/200 mm. It includes a rotating CNC table, work spindle with HSK-E 32 attachment, and a maximum rotation speed of 40,000 rpm. The machine also boasts an automatic tool changer with 16 stations and Siemens 840D control system. If you are looking to get high-quality milling capabilities, consider the DMG ULTRASONIC 10/ DENTAL 10 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • A axis: swivel -10° to 120°, max. Rotation speed 100 rpm • C axis: 360° rotation, max. Rotation speed 150 rpm • Automatic pick-up tool changer with 16 stations for hsk-e 32 clamps • Spindle attachments: hsk-e 32 • External coolant tank: 80 l with 2 bar pump • Infrared workpiece measurement: dmg powerprobe 400 • Ethernet interface preparation Fgjdezx Rpdopfx Akxog • Laser tool measurement with renishaw nc-4 iii • 3d quickset tool kit • Automatic feed system: ph 2|4 basic system Extra Information Control: Siemens 840D solutionline Table Diameter: 190 mm Integrated Quick Clamping System: EROWA ITS 100 Coolant Treatment and Oil Mist Extraction Systems Installed Electronic Handwheel and Machine Data Management DMG Powertools Pre-installed

Condition: ready for operation (used), - USED - PILLAR-TYPE DRILLING MACHINE POWER SUPPLY: 400V-50Hz MAX DRILLING DIAMETER: 25 mm SPINDLE: CM3 Fgjdpfezxu Nuox Akxog TABLE SIZE: 350 x 350 mm WEIGHT: 250 Kg OVERALL DIMENSIONS: 550 x 850 x 1700 mm NOTE: ROTARY TABLE WITH CLAMP

Year of construction: 1997, condition: used, Various metalworking machines are available as a package. 1) Sigg TR 60 glass bead blasting machine, year of manufacture: 1997, max. operating pressure: 8bar, with fan and compressor receiver unit. 2) Rema DP 07 grinding/polishing machine, motor power: 0.22kW/0.37kW, voltage: 380V. 3) Double-ended grinding machine. 4) Weiler lathe. An on-site inspection is possible. Fodszxr R Nopfx Akxjgg

Year of construction: 2012, condition: used, X: 550 mm, Y: 350 mm, Z: 400 mm, Ra ≈ 0,07 μm Tel Erezyon Makinesi (Wire Fgodszxrh Ujpfx Akxjg EDM)

Year of construction: 2019, condition: used, machine/vehicle number: KE01300, This Kleinig riveting machine is being auctioned off online as part of our industrial auction / machine auction – J&S GmbH Automotive Technology – machinery park. Fgsdpfxjzxf N Eo Akxjg You can find this and many other items on our platform.

Year of construction: 2012, condition: used, This HESA riveting system, model AUTO10 MQB Automation, will be auctioned off online as part of our industrial auction / machine auction, J&S GmbH Automotive Technology - Machine Park. Fgedpfszxf Nrsx Akxog You can find this and many other items on our platform.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 220 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 150 mm, number of axes: 3, Gantry milling machine manufactured in 2016. This ISEL ATN Vergusssystem 3 features a robust assembly with X, Y, and Z-axis components, along with a PC control system equipped with a monitor, keyboard, and mouse. The machine offers travel ranges of approximately 220 mm in X, 500 mm in Y, and 150 mm in Z. If you are looking to get high-quality milling capabilities, consider the ISEL ATN Vergusssystem 3 machine we have for sale. Contact us for further details. Fsdpszw H Efsfx Akxsgg - CNC Potting & Dosing System- Machine 1: 0 hours- Machine 2: approx. 20 hours- Machine 3: approx. 500 hours- 3 machines in total- Components per Machine: ISEL machine base frame with X, Y, Z-axis assembly, PC control system with monitor, keyboard and mouse- Loose Accessories: None (all components are assembled together)- External Dimensions: 4 m wide x 1.4 m deep x 2.6 m high (one machine is smaller due to the Y-axis configuration)- Axis data specified for each machine:- Travel Ranges: Approx. X- 220 mm, Y- 500 mm, Z- 150 mm- PC Processor / CPU: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz- PC Memory / RAM: 4096 MB DDR3 1333- BIOS: American Megatrends Inc. RX67QV BIOS Ver 1.05- Software Included: ISEL Remote program (for programming travel paths), ATN software (for programming movements with dosing times for casting/potting systems, e.g., Hilger & Kern), WinControl- Linear Drive Motor / Actuator Specs: Iselgermany EC-LES Spindelantrieb, 135W / 48V- Linear Module Type: Isel Linear-Einheit LES 4

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: INV 42, The shears were purchased new from China in 2012. The machine is in fully working condition but has not been used for the past 5-6 years. It has been replaced by laser cutting machines. Fodpfszwvwkox Akxogg Metal cutting shears from China Country of origin: China Year of manufacture: 2009 Maximum cutting length: L=3200mm Maximum sheet thickness: 12mm, at a tensile strength of 500N/mm2 Model: Y160L-4 Main motor power: P=15kW Number of strokes during normal operation: n=10/minute Pump pressure: Pp= 31.5 Mega Pascals Pump capacity: V= 40l/min Minimum sheet thickness for cutting: 0.5 mm Machine weight: 9,600 kg

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Fgjdpfx Akjzwubbjxog Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: new, functionality: fully functional, Year of construction: 2026, SENFENG SF6012 PLUS – 3kW Fiber Tube Laser Cutting Machine High productivity, efficient material handling and maximum material utilization The SENFENG SF6012 PLUS is a high-performance fiber laser tube cutting machine designed for efficient series production of small to medium-sized tubes and profiles. Equipped with a 3,000 W MAX Photonics fiber laser source, semi-automatic tube loading and the advanced T PLUS overtravel cutting concept, the machine combines high cutting performance with efficient material handling and minimal residual material. Available for viewing, demonstrations and test cutting in our showroom from October 2026. Why choose Besten Machines? ✔ Over 25 years of experience in metalworking ✔ Locations in the Netherlands and Germany ✔ Own Dutch and German service engineers ✔ Installation, commissioning and operator training ✔ Technical support and spare parts availability ✔ More than 70 SENFENG machines successfully installed Fgodpfx Akszwquqsxog Machine Configuration 3,000 W MAX Photonics fiber laser source BOCI autofocus 2.5D laser cutting head FSCUT3000DE-A CNC control system Cooling system for laser source and cutting head Power stabilizer Semi-automatic loading system up to 6.5 m Loading capacity for up to 5 tube/profile positions Unloading station with 2 m conveyor Optional 3–4 m conveyor TubesT 3D tube nesting software Fully enclosed, CE compliant Technical Specifications Model: SF6012 PLUS Laser power: 3,000 W Laser wavelength: 1060–1080 nm Tube length: 1,000–6,500 mm Round tube: Ø15–Ø120 mm Square tube: 15×15–120×120 mm Maximum tube weight: 120 kg Maximum acceleration: 1.5G Maximum rapid speed: 150 m/min Maximum chuck speed: 240 rpm Positioning accuracy X/Y: ±0.4 mm Repeatability X/Y: ±0.4 mm Power supply: 3×380 V / 50 Hz Protection class: IP54 Dimensions incl. loading system: approx. 9,100 × 2,230 × 2,300 mm Machine weight: approx. 3,400 kg Key Features T PLUS Overtravel Cutting The movable front chuck enables overtravel cutting, minimizing residual tube length and maximizing material utilization. Semi-Automatic Loading Loading system with up to five tube/profile positions for material lengths up to 6.5 m, reducing manual handling while maintaining production flexibility. Servo-Controlled Tube Support Active supports reduce sagging and vibration during processing, improving stability and cutting accuracy. FSCUT & TubesT Software Integrated CNC control combined with 3D nesting software for efficient programming, automatic nesting and material optimization. Automatic Unloading Finished parts are discharged via conveyor for controlled and efficient material handling. Applications Suitable for processing carbon steel, stainless steel and aluminium tubes and profiles. Ideal for machine construction, steel fabrication, furniture production, automotive components, agricultural machinery and general series production. Showroom & Service The SF6012 PLUS 3kW will be available in our showroom from October 2026 for demonstrations and test cutting. Besten Machines provides installation, commissioning, training and after-sales service through our own service team in the Netherlands and Germany. Contact us for a quotation or demonstration. Send us your drawings and material specifications and we can perform a test cut for your application.

Condition: used, Year of construction: 2022, For more information, please contact us via email or submit your inquiry. Fgjdpfx Aozwnqvskxsg