S.A.I. Schweiger GmbH

Condition: ready for operation (used), Year of construction: 2006, operating hours: 66,174 h, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, total height: 2,778 mm, table load: 500 kg, overall weight: 4,920 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis Mazak NEXUS 410A vertical machining centre was manufactured in 2006. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a tool capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Mazak NEXUS 410A machine we have for sale. Contact us for further details. • Table size: 900 x 410 mm • T-slots: 3 slots, 18 mm, 125 mm spacing • Spindle speed range: Stepless • Spindle taper: CAT 40 • Spindle bearing inner diameter: 70 mm • Spindle acceleration: 2.04 s • Rapid traverse: 36 m/min • Cutting feed: 1 to 8,000 mm/min (up to 36,000 mm/min) • Axis acceleration: 0.5 G • Max. tool diameter: 80 mm • Max. tool diameter (adjacent empty): 125 mm • Max. tool length: 350 mm • Tool change time: 2.9 s • Spindle motor (AC): 18.5 / 15 / 11 / 7.5 kW • Power requirement: 27.8 / 22.82 kVA • Air supply: 5 bar, 200 l/min Nodpfxsy Htgdj Ah Nowf • Footprint: 2,000 x 2,600 mm • Spindle hours: 66,174 h

Condition: good (used), Year of construction: 2010, operating hours: 78,572 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, overall weight: 12,000 kg, Special Equipment for the Machine: - 1 Extension of the tool magazine from the standard 30 tools to 210 tools, including preparation for 240 tools - 1 Pallet rotary storage system for 10 pallets, including setup station - Number of pallets: 10 - Pallet diameter: 130 mm - Pallet mounting: Capto C6 - Maximum workpiece size: Ø 250 x H 250 mm - Maximum workpiece weight: 40 kg - Pallet clamping force: 22.5 kN - 1 HSC main spindle 40 – 20,000 rpm with 7.5/11 kW motor - Maximum spindle torque: 70 Nm up to 1,500 rpm - Including weekly timer for initiating spindle warm-up cycle and automatic machine shutdown - 1 Spindle holder HSK 63A - 1 Direct path measuring system (Heidenhain) on X, Y, and Z axes, equipped with purge air - 1 KNOLL coolant system, consisting of: - Scraper-belt chip conveyor with lift pump, chip discharge to operator side - Coolant supply through the spindle with KTS25-50T pump, capacity 24 l/min at 70 bar, 5.5 kW - Coolant pressure adjustable in 3 stages - External coolant with coolant pump, capacity 100 l/min at 1.4 bar - Coolant shower with coolant pump, capacity 100 l/min at 1.4 bar - Compact filter KF200, filtering capacity 200 l/min - Dimensions (L x W x H): approx. 1.8 x 1.1 x 1.0 m - Tank capacity: approx. 1,400 liters - 1 Cooling water recooler VWK 90 – D emulsion - Cooling capacity: 11.5 kW - Ambient temperature up to 42°C - Refrigerant: R407c - 1 Coolant spray gun in the working area, including pump and electrical installation - 2 Spiral screw conveyors - 1 TEBARON mechanical air filter TEB/BV2 for extraction of emulsion mist, oil mist, and smoke, consisting of: - 3-stage pre-filter pack - HEPA filter per DIN EN 60335-2-69 with BIA test certificate, separation efficiency >99.995% for particles ≥ 0.3μ - Meets category K1/K2 (carcinogenic substances and pathogens) and dust class H requirements - 1 Single support with base plate for ISI air filter TEB/BV2 - 1 RENISHAW OMP 60 probe for automatic workpiece zero-point setting and measurement, insertable into spindle via tool changer - Includes EASY PROBE SOFTWARE - Pressure gauge for tool length measurement and tool breakage monitoring Special Equipment for the Control: - 1 Increase in part coordinate systems from 6 to 54 - 1 Coordinate system rotation G68/G69 - 1 Chamfering and rounding of corners - 1 Automatic reference point transfer - 1 Resume contouring function - 1 Extension of macro variables from standard 100–149, 500–549 to 100–199, 500–999 - 1 IZ2/150NF HSC precision controller for simultaneous 5-axis machining, including: - Fast Data Server function - High-Speed Precision Contour Control - Nano Smoothing - Dynamic zero-point transfer, up to 8 different zero points available (G54.2) Nwedpey Hrtcefx Ah Nof - TCPC Tool Center Point Control for 5-axis simultaneous milling (G43.4/G49) - Swivel cycle enables machining on an inclined work plane (G68.2/G53.1/G69)

Condition: ready for operation (used), Year of construction: 2020, operating hours: 6,684 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 8,100 rpm, number of axes: 3, This 3-axis HAAS VF-1HE-D was manufactured in 2020. It features a working area with X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine includes a maximum spindle speed of 8,100 RPM and comes equipped with a Renishaw OTS tool setter and a tool magazine. If you are looking to get high-quality machining capabilities, consider the HAAS VF-1HE-D vertical machining centre we have for sale. Contact us for further details. • Electrical • Voltage: 400 V • Frequency: 50/60 Hz • Short circuit capacity: 10,000 A • Enclosure type: NEMA Type 2 (indoor use) • CNC / Control • HAAS CNC control • Control version: Aug 4, 2020 • Software release: 100.20.000.1101 • MOCON: 1.16.K • Machine data • Tool changes: 30,278 • Power cycles: 711 • Power on time: 6,684 hours • Active features / options • Macros • Rotation & Scaling • Rigid Tapping • M19 Spindle Orient • High Speed Machining Nwsdpfx Asy Hrq Ueh Njf • VPS Editing • Media Display • Max memory: 1 GB • Wireless Networking • Compensation Tables • Tooling/ATC • Tool magazine (ATC) • Standard HAAS control Additional equipment • Renishaw OTS tool setter • Machine vise

Condition: excellent (used), Year of construction: 2001, HSC milling machine DIGMA 500GC Serial No.: 05-191 Year of manufacture: 2001 Nwedpfx Ahjy Hqaus Nef Control: Heidenhain TNC 426

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table load: 200 kg, overall weight: 2,550 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 5,500 W, tool weight: 3,000 g, number of axes: 3, This 3-axis ARES-SEIKI R4530 was manufactured in 2006. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 300 mm. The machine includes a work table size of 600 mm x 300 mm and a maximum table load of 200 kg. If you are looking to get high-quality machining capabilities, consider the ARES-SEIKI R4530 vertical machining centre we have for sale. Contact us for further details. • Travels & Table • Work table size: 600 x 300 mm • Automatic Tool Changer (ATC) • Tool storage capacity: 10 tools • Tool selection: Random, bi-directional • Max. tool diameter: 80 mm • Max. tool length: 200 mm • Tool-to-tool change time: 1.0 s • Motion & Accuracy • Rapid traverse (X/Y/Z): 30,000 mm/min • Cutting feedrate: 1–5,000 mm/min • Positioning accuracy: ±0.005/300 mm • Repeatability: ±0.002 mm • General Data • Power requirement: 15 kVA • Air pressure requirement: 5 kg/cm² Technical Specification Taper Size BT 30 Nwsdpfjy Hi Udex Ah Nef

Condition: like new (used), Year of construction: 2014, operating hours: 12,000 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, torque: 60 Nm, controller manufacturer: Siemens, controller model: 840D SL, total height: 2,390 mm, total length: 2,515 mm, total width: 1,700 mm, table load: 200 kg, overall weight: 3,500 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 30 h, number of slots in tool magazine: 24, tool length: 200 mm, tool diameter: 80 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a CNC milling machine Spinner VC450 from 2014 in very well-maintained condition. Highlight: The machine is equipped with a new spindle with only approx. 30 spindle hours (no crash), professionally installed by the manufacturer Spinner – technically in excellent condition. Used Tested and fully functional Nwjdoy Hf Nqspfx Ah Nef Ideal for precision machining – ready for immediate operation. ➡️ Additionally available: A comprehensive range of accessories can also be purchased, including machine vises, SK40 tool holders, and other equipment. Inspection and test run possible by appointment. If interested, please get in touch.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: FANUC, controller model: 31i-B5, overall weight: 2,250 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis FANUC Robodrill D21MIB 5ADV Plus was manufactured in 2023. It features a high-speed spindle capable of 10,000 rpm and a robust automatic oil lubrication system. The machine includes a center-through coolant system and a servo turret for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill D21MIB 5ADV Plus vertical machining centre we have for sale. Contact us for further details. • Mechanical unit: D21MiB5 • Spindle: BIG-10000-MAS-CTC • Spindle motor: high torque CTC • Center-through coolant system (CTC) • Air blow center-through • Flood coolant piping • CTC coolant piping • Automatic oil lubrication system • Servo turret: BT-T21-MAS • Compact flash card adapter • Operator panel: English • Internal LED lighting • Designation of control axes • Designation of two additional axes • Parameter setting: 4th axis • Parameter setting: 5th axis • High column: 300 mm • Spindle head full cover • Z-axis single plate cover • Splash protection enclosure • Air-through CTC kit • Transformer: 20 kVA IP23 • Mechanical unit weight: approx. 2250 kg • Condition: New machine Nwsdpfey E Iknsx Ah Nof • Warranty: 1 year Additional equipment • Robot interface 2 without hub • Robot connection function • Additional I/O: DI/DO 48/32

Condition: ready for operation (used), Year of construction: 1999, Chiron FZ 12 W High Speed Year: 1999 Control: Siemens Sinumerik Type: Vertical machining center with pallet changer Axes travel X axis: approx. 550 mm Y axis: approx. 300 mm Z axis: approx. 425 mm Spindle Spindle taper: SK40 Spindle speed: approx. 10,000 to 10,500 rpm Spindle motor power: approx. 9 to 15 kW Tool system Tool changer capacity: approx. 12 to 20 positions Max tool weight: approx. 4 kg Tool holder: SK40 Table Table size: approx. 660 x 350 mm Nedpsy E Ihgsfx Ah Njwf Max workpiece weight: approx. 150 kg Table type: pallet changer system Electrical data Voltage: 400 V or 230 V Frequency: 50 to 60 Hz Power consumption: approx. 11 kVA Current: approx. 15 A Machine dimensions and weight Weight: approx. 4000 kg Length: approx. 3000 to 3500 mm Width: approx. 2500 to 3000 mm Height: approx. 2500 to 3000 mm Coolant system Manufacturer: Knoll Type: 340 K 1 600 Year: 1999

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: FANUC, controller model: Series 21i-M, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis CHIRON FZ 08 W was manufactured in 2001. It features a maximum spindle speed of 18,000 rpm and a robust tool interface with HSK-A40. The machine includes integrated pallet changer for efficient workpiece handling. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 08 W vertical machining centre we have for sale. Contact us for further details regarding this machine. Nedpey Ex H Hjfx Ah Newf • Condition: Machine is no longer functional and can only be used as a supplier of spare partsElectrical data • Kind of current: 3/N/PE ~ 50/60 Hz • Working voltage: 400 V • Control voltage: 230/24 V • Rating: 12 kVA • Rated current: 17 A • Fuse: 20 ASpindle • Spindle type: Water-cooled motor spindle • Max. torque: approx. 15 NmOther machine details • Workpiece changing system: Integrated pallet changer (W-type) • Maintenance intervals noted: 8h, 50h, 200h, 500h, 2000h, 6000h • Lubrication requirements: INSK K11 / ALKANIA 2 (Shell)

Condition: like new (used), Year of construction: 2007, functionality: fully functional, HAAS SUPER MINIMILL machining centre, year 2007 Nsdpsy D S Tqofx Ah Newf

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis YCM XV 560A was manufactured in 2011. It features a table size of 700 x 420 mm and impressive X, Y, and Z travels of 560 mm, 410 mm, and 450 mm, respectively. The machine is equipped with an 11 kW spindle power and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the YCM XV 560A vertical machining centre we have for sale. Contact us for further details. • Table size: 700 x 420 mm Nwedpsy Duxvefx Ah Njf • Condition: Very good; low hours; used in 1-shift production

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, CNC control Fanuc Oi-MD electronical hand wheel 24-fold automatic tool changer Technische Daten / technical details: Verfahrweg X / X-Travel 510 mm Verfahrweg Y / Y-Travel 410 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 600x400 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Eilgang X,Y,Z / rapid feed X,Y,Z 36/36/36 m/min Anzahl der Werkzeugplätze / tool places in ATC 24 Antriebsleistung Spindel / drive capacity spindle 11,5 kW Gewicht der Maschine ca. / weight ca. 4000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Nodpfxoy Ddnys Ah Nowf

Condition: like new (used), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, 5-Axis Machining Center Hedelius Acura 50 Control: Heidenhain TNC 7 Year of manufacture: 2025 Spindle hours: approx. 150h Internal machine No. 54 Travel distances: X-axis: 500 mm Nwodpfx Asy Dc Dteh Nef Y-axis (H / V): 550 / 370 mm Z-axis: 550 mm Swivel range: +30° to -115° Rotary table: Ø 500 x 430 mm Taper: SK 40 DIN 69871 Tool magazine: 55 positions Spindle speed: 50 - 14,000 rpm Drive power: 22 kW Equipment: - KinematicOpt - 3D Formingstar package - Sieve filter coolant system 500l - ICS 25 bar - Pressure booster pump from 25 to 50 bar - Scraper belt conveyor - Blow-off gun - Rinsing gun - Electronic handwheel HR 510 FS - Infrared receiver M&H - 3D infrared probe M&H 25.50 - Laser control system Blum LC50 260 - LTA extraction

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: P014TM481, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: FANUC, controller model: SERIES 16i-M, total height: 2,200 mm, total length: 2,500 mm, total width: 2,000 mm, table width: 410 mm, table length: 850 mm, overall weight: 2,000 kg, number of slots in tool magazine: 14, STAMA FANUC MC 014 CNC Vertical Machining Center - Operating voltage: 400 V Frequency: 50 Hz Rated current: 17 A Nedpfjy Dcp Njx Ah Newf - Table with three T-slots The machine is equipped with a 14-position tool turret Note: The machine vice shown in the photos is not included in the scope of delivery! Note: The item must be collected between July 7 and July 9, 2026, on a date to be agreed. FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), Year of construction: 2013, If some parts shown by hand, that parts not come with machine. Technical data shown on picture. Nwedpfx Aoy Awxpsh Nof

Condition: good (used), Double-axis tilting rotary table (4th and 5th axis). Table diameter: 100 mm, maximum speed: 1,000°/sec, tilting axis travel: ±120°, rotary axis travel: 360°. Nwjdey Avgfopfx Ah Nsf

Condition: defective spare-parts repository (used), The machine is defective; the control system does not start up. Mechanically, it is in good condition. Nwjdpfx Ahjy Auc Ee Nsf

Condition: ready for operation (used), Year of construction: 2013, TECHNICAL DATA Brand: FANUC Model: ROBODRILL α-D21LiA5 Year: 2013 CNC: FANUC 31i-MODEL B5 Serial Number: P135 YH478 TABLE DIMENSIONS Table size: 850 x 410 mm Load capacity: 300 kg T-slot spacing: 125 mm Number/size of T-slots: 3 x 14 mm TRAVELS X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Distance from table to spindle nose: 150 to 480 mm Nwjdpfey At Aqox Ah Nsf FEEDS Rapid traverse X/Y/Z: 54 m/min Cutting feedrate: 1 to 30 m/min MOTORS Drive motor: 11 kW (1 min) / 3.7 kW continuous Feed motors X/Y/Z: α8/4,000is (2.9 kW) TURRET Taper: MAS BT 30 Drawbar type: MAS P30T-1 (45°) Column to spindle center distance: 400 mm PRECISION Positioning accuracy: 0.006 mm Repeatability: ±0.004 mm Tool magazine capacity: 21 Maximum tool length: 250 mm Tool change time: Approx. 1.8 s SPINDLE Spindle speed range: 100 to 10,000 rpm Spindle taper: 7/24 Taper No. 30 Internal cooling MACHINE DIMENSIONS Machine height: 2,236 ± 10 mm Floor space required: 2,115 x 2,040 mm Machine weight (including control section): Approx. 2,100 kg POWER SUPPLIES Electrical supply: 11 kVa Compressed air requirement: 0.35 to 0.55 MPa (gauge pressure) (0.5 MPa recommended), 0.15 m3/min (150 l/min) (at atmospheric pressure) ACCESSORIES Original FANUC 4th axis rotary table DDR (new price €18,000) Zero point clamping system Schunk NSE plus 138-V1 mounted on rotary (new price €2,100) Two Schunk KONTEC KSM2 90-400 vices (new price €2,000 each)

Condition: used, Year of construction: 2017, (2017) Bridgeport GX480 CNC Vertical Machining Centre with Fanuc Oi-MF Control Table Dimension 600 x 400mm (3 'T' Slots, Dimension 14 x125mm). Maximum Table Load 300kg. Axis Travel 'X'=480mm, 'Y'=400mm, 'Z'=430mm. Spindle Nose To Table Min/Max 150-580mm. Distance From Column To Table Centre 429mm. Rapid Traverse 'X'=36m/min, 'Y'=36m/min, 'Z'=36m/min. Maximum Spindle Speed 10,000rpm (7.5kW Motor). Spindle Taper BT40. 16 Position ATC. Maximum Tool Ø94mm (Ø150mm non Adjacent), Maximum Tool Weight 7kg. Maximum Tool Length 250mm. S/No. NVLB7E0004 (2017). With Coolant System, LCE Transformer & Handwheel. Approx Dimensions W1,800 x D2,445 x H1,940mm. Weight 3,800kg. Note: Workholding/Tooling Not Included. Nwsdpfxey Angke Ah Nef

Condition: new, Year of construction: 2022, (2022) NEW Brother W1000Xd1 CNC Vertical Machining Center Nwodpfey Ami Rjx Ah Njf X-axis travel: 1000 mm, Y-axis travel: 500 mm, Z-axis travel: 380 mm, CNC type: CNC-D00, Table length: 1100 mm, Table width: 500 mm, Max. workpiece weight: 5000 kg, Tool magazine: 28, Max. spindle speed: 16000 rpm, Spindle motor power: 12.9 kW, L x W x H: 2410 × 2333 × 2633 mm, Operating hours: 0 hours

Condition: used, Year of construction: 1999, x-travel 500 mm y-travel 400 mm Nwedpsy Aa Nkjfx Ah Nef z-travel 400 mm control Heidenhain weight of the machine ca. 3200 kg

Condition: excellent (used), Year of construction: 2012, Technical specifications: Nedpfxjyzzpvs Ah Nswf 5-axis machine: X, Y, Z, C, B Travel distances (X/Y/Z): 500 / 450 / 400 mm Travel range B axis: +110/-5° Travel range C axis: 360° CNC control: SIEMENS 840D Table width: 500 mm Table diameter: 630 mm Table angle adjustable in degrees Max. workpiece weight: 200 kg Number of tool changer positions: 30 Spindle speed: 20 – 10,000 rpm Motor power: 13 kW Dimensions (L x W x H): approx. 3400 x 2550 x 2200 mm Machine weight: approx. 4.8 t Additional equipment: Workpiece measuring probe Chip conveyor Condition: Very good condition, little used, approximately 12,850 operating hours

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11120, CNC Machining Center Brother R450X1 Year of manufacture: 2014, Serial number 11120 Control unit: Brother CNC Interface Equipment: 14-position tool changer, special clamping system with magnetic clamping plate Travel distances (X, Y, Z): 450 mm, 320 mm, 305 mm (17.7 in, 12.6 in, 12 in) ----- Attractive Offer – Flexible & Worry-Free We not only offer you a top-quality product, but also customized financing solutions tailored to your needs. Whether down payment, installment plans, or individual financing models – together, we will find the right solution for you. On request, we can also handle the entire transport logistics. From planning to reliable delivery, we ensure a smooth and timely process, so you don’t have to worry about a thing. 📞 Please feel free to contact us for more information or a non-binding offer. Nsdpeyzpffefx Ah Newf We provide personal and competent advice.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 111849, CNC Machining Center Brother TC-R2A Year of manufacture: 2006, Serial number 111849 Control: Brother Equipment: 14-position tool changer, spindle mount BT-30 Travel distances X: 420 mm (16.5 in) Y: 320 mm (12.6 in) Z: 270 mm (10.6 in) ----- Attractive offer – flexible & worry-free Nwedsyzpdbjpfx Ah Nof We not only offer you a high-quality product, but also tailor-made financing options adapted to your needs. Whether down payment, installments or custom financing models – together, we will find the right solution. Upon request, we can also handle the entire transport logistics for you. From planning to reliable delivery, we ensure a smooth and punctual process so you can focus on your core business. 📞 Contact us for more information or a non-binding offer. We provide personal and competent advice.

Condition: excellent (used), Year of construction: 2010, operating hours: 1,350 h, Very little used machine, approx. 1,350 spindle hours! Nwsdoyzaq Sspfx Ah Njf Control: Fanuc 31 i Travel X-axis: 300 mm Travel Y-axis: 250 mm Travel Z-axis: 250 mm Number of tool stations: 12 positions Tool holder: HSK 32 Number of spindles: 1 Rapid traverse Z-axis: 60 m/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Max. speed: 15,000 rpm Chip conveyor