Songlim Machinery

Year of construction: 2018, condition: ready for operation (used), overall weight: 11,000 kg, total width: 1,850 mm, total height: 2,890 mm, pressing force: 204 t, product length (max.): 3,580 mm, stroke length: 260 mm, Hydraulic press manufactured in 2018. This Baykal APHS 31200 features a press force of 200 t and a bending length of 3,100 mm. With a maximum stroke of approximately 260 mm, it is designed for efficient bending operations. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31200 hydraulic press we have for sale. Contact us for further details. • Hydraulic pressure: approx. 276 bar Psdez Hl Iuepfx Abgsrb • Nominal power: approx. 15.3 kW • Power supply: 400 V / 50 Hz / 3 Ph • Production hours: 2,154 h Additional equipment • Included tooling: • V16 H80 mm: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×2 mm • V50 H60 mm: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×3 mm • V12 H80 mm: 10 ×2 / 15 / 20 / 195 / 285 / 295 / 835 ×3 mm • V80 H80 mm: 835 ×3 mm • V16 / V22 / V32 / V50: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×3 mm • Additional tooling information: • ID 1177 – Standard – 85° – Height 65.50 mm – Radius 3.00 mm • ID 1271 – Standard – 60° – Height 115.00 mm – Radius 0.80 mm • ID 1284 – Standard – 60° – Height 135.00 mm – Radius 0.80 mm • TS-10.516 – Standard – 60° – Height 85.00 mm – Radius 0.80 mm Technical Specification Bending Length 3100 mm

Year of construction: 2018, condition: ready for operation (used), overall weight: 4,100 kg, total width: 1,810 mm, total height: 2,780 mm, pressing force: 76 t, product length (max.): 7,060 mm, stroke length: 160 mm, Metal press manufactured in 2018. This Dunkes HR75 features a nominal straightening force of 750 kN and a maximum ram stroke of 160 mm. The machine has a usable shaft length of 3000 mm and a throat depth of 250 mm. If you are looking to get high-quality straightening capabilities, consider the Dunkes HR75 machine we have for sale. Contact us for further details. - Max. Installation Height: 885 mm- Min. Installation Height: 725 mm- Throat Depth: 250 mm- Ram Speed "DOWN": 2 - 30 mm/s- Ram Speed "UP": 15 - 68 mm/s- Press Table Height above Floor (with / without oil pan): 730 / 700 mm- Usable Shaft Length: 3000 mm- Usable Shaft Diameter: ø 120 / ø 170 mm- Straightening Bridge Length: 2000 mm- Extension Bed Extension: 2 x (1010 + 1520 mm) / Attached tables 2.5 m length each- Main Pump Drive Power: 7.5 kW- Network Type: L1-3/N/PE (TN-S)- Frequency: 50 Hz- Operating Voltage: 400 V~- Connected Load: 9 kVA- Nominal Current: 14.5 A- Supply Line / Fuse: 32 A CEE / 32 A- Hydraulic Tank Capacity: approx. 280 Liters- Weight (without tools and additional equipment, without hydraulic oil): approx. 4100 kg- Emission Sound Pressure Level Lpa: 78.5 dB(A)- Uncertainty Kpa: 8 dB(A) Prsdsz E Igwjpfx Abgeb

Condition: used, There are three May MKN1-100/6 toggle-type presses available, ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible. Psdpfoz D Hzdex Abgjrb

Year of construction: 2018, operating hours: 7,062 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: Simatic HMI, overall weight: 50,000 kg, total height: 4,900 mm, pressing force: 459 t, table length: 1,000 mm, table width: 1,800 mm, This Sangiacomo T.450 RCE Bending machine was manufactured in the year 2018 in Italy and has 7062 production hours. It is equipped with a Siemens Simatic HMI control unit. The machine has a pressing force of 4500 kN, is in excellent condition, and has low hours. Machine Benefits Qualitative Machine Benefits • Excellent condition, low hours. Technical Machine Benefits • Ram size 900x1400 mm • Adjustable stroke 22-250 mm • Ram adjustment 120 mm Prodpfx Abjz D Emfogeb • Max. Die surface 900x1650 mm • Max. Upper die weight 900 kg Dimensions Machine Depth 3100 mm

Year of construction: 1987, condition: used, Control: Cybelec DNC 600S. Inspection by appointment possible. Psdpfx Asz Dkkcsbgsrb

Condition: used, Year of construction: 1999, 5-STATION HYDRAULIC PRESS, FISCHER PRESSURE: 5 x 80 tons Psdpfxjz A Aw Eo Abgjrb TABLE DIMENSIONS: 800 x 560 mm STROKE LENGTH: 500 mm

Year of construction: 1980, condition: ready for operation (used), The pressure relief valve is defective (pressure gauge). Prjdsz Abxdopfx Abgeb

Year of construction: 1968, condition: ready for operation (used), pressing force: 306 t, stroke length: 400 mm, Hydraulic 4-Column Press manufactured in 1968. This Müller SE 300-25.1.1 is designed for metal pressing applications, featuring a stopping time of 89 ms and a stopping distance of 75 mm. If you are looking to get high-quality metal forming capabilities, consider the Müller SE 300-25.1.1 machine we have for sale. Contact us for further details. • Machine Type: Hydraulic 4-Column Press • Application Type: Metal Press / Forming Press • Stopping Time: 89 ms • Stopping Distance: 75 mm • Safety Distance: 160 mmA valve is missing from the upper sectionThe thread on a cylinder tube is defective Pedpfxjzzv Tao Abgerb

Year of construction: 1998, condition: ready for operation (used), pressing force: 102 t, number of axes: 4, This 4-axis Warcom UNICA 100-40 hydraulic press was manufactured in 1998. It features a press force of 100 t and a bending length of 4,000 mm, making it suitable for various bending applications. The machine is equipped with a Promecam tooling system and ESA S530 CNC control. If you are looking to get high-quality bending capabilities, consider the Warcom UNICA 100-40 machine we have for sale. Contact us for further details. • Tool clamping/tooling system: Promecam Prodpfx Abozypubegeb • CNC control: ESA S530 • Condition: Overhauled/revised, ready for operation Additional equipment • Laser Safe safety system Technical Specification Bending Length 4000 mm

Year of construction: 2005, condition: ready for operation (used), overall weight: 9,500 kg, total width: 1,700 mm, total height: 2,300 mm, pressing force: 102 t, product length (max.): 3,800 mm, number of axes: 8, CNC Hydraulic Press Brake manufactured in 2005. This GASPARINI X-Press 100 features a press force of 100 t and a bending length of 3,100 mm. It is equipped with a Delem DA60 control and a dynamic hydraulic crowning system for enhanced precision. If you are looking to get high-quality bending capabilities, consider the GASPARINI X-Press 100 machine we have for sale. Contact us for further details regarding this machine. • Ram stroke: 300 mm • Tool clamping: Promotec pneumatic system • Hydraulic crowning: Dynamic hydraulic crowning of the lower table • Axes: Y1, Y2, X, R, Z1, Z2, X1, X2 (8 axes) Pjdpfxjzypi Ee Abgerb • Oil seals: Replaced • Oil: New • Warranty: Included • Condition: Machine guaranteed / ready for sale Technical Specification Bending Length 3100 mm

Condition: used, Year of construction: 1998, Press force: 3500 t Stroke: 900 mm Frame width: 3200 mm Side frame opening: 2200 mm Shut height (stroke up): 1700 mm Table area: 3150 x 2150 mm Prjdozypa Rjpfx Abgob Table height above floor: 500 mm Ram area: 3150 x 2400 mm Downstroke speed: 400 mm/s Upstroke speed: 210 mm/s

Condition: used, Year of construction: 1975, Press brake manufactured by FISCHER, model HAKS 10/3200. Pressing force approximately 100 tons. Year of manufacture 1975. Brief summary provided – a full technical translation will follow if required for this lot. Pedpfxezymazo Abgerb

Year of construction: 1995, condition: used, Rated force: 6000kN, rated force travel: 1.7mm, rated energy: 10.2kJ, stroke: 100mm, stroke rate: 45/min, installation height: 360mm, tool holder adjustment: 50mm, clear width of press frame: 580mm, table width: 550mm, table depth: 620mm, tool holder width: 550mm, tool holder depth: 430mm, motor power: 15kW, length: 2435mm, width: 1500mm, height: 2750mm, weight: 13.5t, an on-site inspection is possible. Predpfszybugox Abgob

Condition: as good as new (ex-display), Year of construction: 2024, pressing force: 80 t, Equipment: documentation/manual, YAWEI SKE1-80 Precision Servo Press – 800 kN / 80 t - Stock Machine - Demo Machine - Available immediately For sale is a YAWEI SKE1-80 precision servo press from the manufacturer Jiangsu Yawei Machine Tool. This servo press is suitable for precise punching, forming, and pressing operations and, thanks to the servo drive, allows for freely adjustable motion and pressing curves. Speed, position, and the pressing process can be controlled precisely. Manufacturer: YAWEI / Jiangsu Yawei Machine Tool Model: SKE1-80 Pressing force: 800 kN / approx. 80 t Ram stroke: 150 mm Idle stroke rate: max. 65 strokes/min Working stroke: 6 mm Max. tool installation height: 330 mm Ram adjustment: 80 mm Podpfx Abezyamzegsrb Ram area: 560 × 460 mm Table area: 1,000 × 600 mm Table thickness: 120 mm Operating pressure: 0.55 MPa Peak torque: 4,000 Nm Drive: Servo motor / Gear drive

Year of construction: 1985, condition: used, Max. pressing force: 150t, bending length: 4050mm, backgauge: 750mm, control: Cybelec CNC 7200 P, weight: approx. 15t. Equipped with hydraulic tool clamping, crowning system, height-programmable backgauge, two control panels and two pneumatic bending aids. Including stand with various upper tools and dies as well as various special accessories manufactured in-house. Documentation available. An on-site inspection is possible. Prodpfx Abszx Ehbogeb

Year of construction: 1995, condition: ready for operation (used), overall weight: 52,000 kg, total width: 5,100 mm, total height: 5,170 mm, pressing force: 204 t, product length (max.): 1,750 mm, table length: 800 mm, table width: 3,800 mm, Hydraulic press manufactured in 1995. This EXNER EX SBR 200 features a pressing force of 2000 kN and a drive power of 78 kW. With an oil capacity of 1400 liters and a weight of 52000 kg, this machine is designed for robust performance. If you are looking to get high-quality pressing capabilities, consider the EXNER EX SBR 200 hydraulic press we have for sale. Contact us for further details. - Pressing Force: 2000 kN- Drive Power: 78 kW- Overtravel Distance: 56 mm- Safety Distance: 235 mm- Overtravel Time: 147 ms- Max. Ram Stroke: 700 mm- Distance Between Columns: 3830 mm- Installation Height: 1200 mm- Ram Diameter: 240 mm- Number of Ram Cylinders: 2- Table Bed Depth: 800 mm- Table Bed Width: 3800 mm- Clamping Plate Thickness: 150 mm- T-Slots Configuration: 8 slots, 28 mm slot width, 650 mm spacing- Total Connected Load: 90 kVA- Total Power Requirement: 77.48 kW- Voltage: 400 V- Frequency: 50 Hz- Main Motor 1 (VEM 250 M4): 55 kW, 1475 rpm- Motor 2 (VEM 132M4): 7.5 kW, 1435 rpm- Motor 3 (VEM 100Lx4): 3 kW, 1430 rpm- Motor 4 (VEM 132S4): 5.5 kW, 1440 rpm- Motor 5 (VEM 132S4): 5.5 kW, 1440 rpm- Motor 6 (ZG1KMR63G4 VEM): 0.37 kW, 40 rpm- Oil Cooler Motor (Oiltec TB/33-6): 0.55 kW, 1000 rpm- Lubrication Pump Motor (Woerner GMA-B): 0.06 kW- Press Oil Tank Capacity: 1400 liters (ISO VG 46)- Hand Lubrication Pump Capacity: 1.5 liters (Shell Alvania EP2)- Motor Lubrication Pump Capacity: 2 liters Prsdpfezxz Spjx Abgsb

Year of construction: 2014, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC Panel (OP3RL), pressing force: 51 t, Hydraulic press manufactured in 2014. This WIS ATEVI Druckgeber ATeVi Heidel features a ram stroke of 800 mm and a closing force of 500 kN. It has a machine weight of 19,500 kg and includes a Siemens S7 control system. If you are looking to get high-quality hydraulic pressing capabilities, consider the WIS ATEVI Druckgeber ATeVi Heidel machine we have for sale. Contact us for further details. Prodpfx Aezxgqdsbgob - Dimensions (WxDxH): 5000 x 1740 x 5255 mm- Installation Opening (WxDxH): 2450 x 1200 x 1700 mm- Machine Weight: 19500 kg- Tool Weight: 8400 kg- Closing Force: 500 kN- Opening Force: 250 kN- Ram Stroke: 800 mm- Control System: Siemens S7 / Siemens SIMATIC Panel (OP3RL)- Power Consumption: 43 kW- Operating Voltage: 3 / N / PE AC 60 Hz 440 V- Frequency: 50 Hz- Control Voltage: 24V DC- Rated Current: 59 A- Fuse: 63 A- Additional Equipment: Funke Oil/Air Cooling Unit, hydraulic hose assemblies, remote control unit

Year of construction: 1959, condition: used, The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible. Prodpfxszv T Iwe Abgsb

Condition: used, Two eccentric presses are offered. 1) ETH 3 eccentric press, pressing capacity: 30000kg, cutting area for material with 45kg strength: 665mm², ball screw adjustment: 40mm. Including protective cover and separate control cabinet. 2) An eccentric press with C-frame design, design: C-frame with flywheel, die clamping: hydraulic clamping device on the table. Including safety enclosure. An on-site inspection is possible. Podpfx Abozvy Hasgerb

Year of construction: 1980, condition: ready for operation (used), overall weight: 25,000 kg, pressing force: 408 t, stroke length: 1,490 mm, table length: 4,500 mm, table load: 60,000 kg, table width: 2,500 mm, Hydraulic press manufactured in 1980. This FRITZ MULLER ZAE 400-25.1.1 features a substantial press force of 400 t and a table size of 4,500 × 2,500 mm. The ram and additional clamping plate size is 4,500 × 2,500 mm, with a ram stroke of 1,490 mm, providing robust performance for various applications. The travelling table supports a maximum load of 60 t. If you are looking to get high-quality pressing capabilities, consider the FRITZ MULLER ZAE 400-25.1.1 machine we have for sale. Contact us for further details. Pressing Force • Ram Force: 4000 kN • Table Ejector Force: 200 kN • Ram Cushion Force: 2000 kN Stroke • Ram Stroke: 1490 mm • Table Ejector Stroke: 550 mm • Ram Cushion Stroke: 200 mm • Max. Stroke: 900 mm (UT) Podpfx Abezvyzwjgorb Working Area • Ram Cushion Surface: 4000 × 1500 mm • Max. Tool Installation Height: 2390 mm • Max. Travelling Table Load: 60 t Clamping Surfaces • Ram & Additional Clamping Plate: 4500 × 2500 mm • Travelling Table: 4500 × 2500 mm Additional Information • Oil Capacity: 3000 l HLP46 • Oil Cleanliness Class: 15/13/10 according to ISO 4406 • Travelling Table: Max. Load 60 t

Condition: good (used), Table press Prodszvw R Ajpfx Abgob Storage number: Year of manufacture: 1986 Machine number: 599 Manufacturer: Robotron Dresden Press type: PETSe 0.5 Type: 2-column table press Table area: 280 x 280 mm Overhang: 55 mm Pressing force: 0.5 t Distance table – ram: 60 to 220 mm Stroke: approx. 10 to 20 mm Column passage: 90 mm Dimensions: 340 x 500 x 600 mm Features: Single and continuous stroke, 2-hand operation Condition: good, ready for use Weight: 69 kg

Condition: used, Year of construction: 1997, SCHMID T3-400 3 – TECHNICAL DATA Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 3 Machine No.: T3-400 3 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Hydraulic nutation / orbital forming press (Taumelpresse) CE marked: Yes PRESS DATA Nominal press force: 4,000 kN Equivalent press force: approx. 408 metric tons Operation: Hydraulic Working direction: Vertical Press construction: Four-column press Number of columns: 4 Forming process: Nutation / orbital forming Predpozvnr Rofx Abgeb Tool arrangement: Upper and lower tooling Operation mode: Automatic / PLC controlled HYDRAULIC SYSTEM These specifications are confirmed directly by the machine plate in your new photo: Press force: 4,000 kN Hydraulic oil capacity: 1,500 litres Lubricating oil capacity: 350 litres Maximum hydraulic pressure: 250 bar Maximum lubrication pressure: 315 bar ELECTRICAL DATA From the other T3-400 nameplate you sent earlier: Connection voltage: 3 × 400 V Frequency: 50 Hz Connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 CONTROL & ELECTRICAL EQUIPMENT Control: Siemens PLC PLC system: Siemens SIMATIC Power supply: Siemens SITOP Operator panel: Machine-mounted control panel Electrical cabinet: Integrated/separate machine electrical cabinet Automatic operation: Yes Parameter-controlled operation: Yes Emergency stop: Yes MACHINE / WORKING AREA Press frame: Four-column construction Working area: Enclosed Lower tooling: Circular die/tool mounting arrangement Upper tooling: Circular tool arrangement Automatic workpiece handling: Integrated Hydraulic lubrication: Yes Hydraulic power unit: Integrated Pressure monitoring: Yes

Condition: ready for operation (used), Year of construction: 1997, SCHMID T3-400 2 Nutation Press / Taumelpresse Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 2 Machine No.: T3-400 2 / MK20166 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Nutation press / Taumelpresse Control: Siemens PLC Operation: Automatic / PLC controlled Technical Data Press type: Nutation press / orbital forming press Nominal press capacity: 400 t / approx. 4,000 kN * Number of pressing stations: 2 / double station configuration * Working direction: Vertical Press construction: Four-column press Tool / die arrangement: Upper and lower tooling Operation: Hydraulic Machine cycle: Automatic / programmable *The 400 t capacity and interpretation of “2” as the machine configuration are consistent with the T3-400 designation, but I would not advertise those two as manufacturer-confirmed specifications unless you have the original technical manual. Podpfx Abozvnqtogjrb Control & Electrical Equipment Control system: Siemens PLC PLC hardware: Siemens SIMATIC Power supply module: Siemens SITOP PSU8200 Operator control: Machine-mounted control panel Electrical cabinet: Separate integrated electrical cabinet Electrical Data Connection voltage: 3 × 400 V Frequency: 50 Hz Total connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 These values are directly readable from the SCHMID machine plate in your photo. Press / Working Area Press frame: Four-column construction Number of columns: 4 Lower tool table: Circular tooling / die mounting arrangement Upper tool holder: Circular tooling arrangement Machine enclosure: Fully enclosed working area Access: Front access door Automatic workpiece handling: Integrated Hydraulic lubrication system: Yes Production Counter Total strokes displayed: 19,304,255 strokes

Year of construction: 2005, condition: used, Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement. Psdpjzun T Ssfx Abgsrb

Year of construction: 1994, condition: used, Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible. Prsdpszun T Eefx Abgsb