Uab Galeaservice

Condition: used, Year of construction: 2020, Yanmar SV60-A excavator Dsdpfxs Aivame Ap Aswd Technical specifications: - Year of construction: 2020 - Transport weight: 5,560 kg - Operating weight: 5,635 kg - Rubber track width: 400 mm - Digging depth: 3.91 m - Engine power: 32.6 kW - Displacement: 1,995 l

Year of construction: 2008, condition: good (used), Manufacturer / Model: AB Graphics · Digicon Series 2 Dwodo Aivafepfx Ap Aod Year: 2008 Machine type: Label finishing and converting system Web width / Speed: Condition / Availability: TECHNICAL CONFIGURATION Unwind / Web guide: 1 unwind shaft · FMS web guiding system Surface treatment: Corona unit Printing unit: Semi-/full-rotary printing unit Drying: Hot-air dryer and UV dryer Lamination: For self-adhesive laminate or wet lamination FINISHING & CONVERTING Hot foil: Rotary hot-foil unit with magnetic cylinder for tooling Embossing: Relief embossing unit with magnetic cylinder Die-cutting: Semi-rotary die-cutting station with Gap Master Slitting: Razor-blade slitting · Shear-knife unit Rewinding: 2 rewind shafts

Condition: used, Year of construction: 2021, JCB 16C-1 mini excavator - only 893.5 operating hours  Dwodpfx Apo Aiu Udo Aed

Condition: good (used), Year of construction: 2006, Manufacturer: CFS Model: OptiCoater600 Year: 2006 Condition: Used Serial number: 48 Stock number: 3466 Web width: 600 mm Web speed: 2 - 20 m/min Power: 3 x 400V, 50Hz, 3.5kW Dimensions: 2250 x 1300 x 1400 mm Weight: 456 kg Coating machine with an additional conveyor belt of 750mm, which can be controlled separately in terms of speed. Minimum coating volume: 50 liters. Dwjdpfx Aps Aiu T Is Ajd Equipped with a base-mounted pump and blower.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1.302.981, overall weight: 280 kg, load capacity: 20 kg, arm reach: 1,813 mm, controller model: KR C4 NA UL, No minimum price – guaranteed sale to the highest bidder! The offer includes only the robot without the enclosure! The enclosure can be purchased separately for an additional €3,500! TECHNICAL DETAILS Payload: 20 kg Reach: 1,813 mm Dsdpfxo Aiu Tyo Ap Aswd MACHINE DETAILS Controller: KR C4 NA UL Total weight: 280 kg Operating hours: approx. 500 hours EQUIPMENT Teach pendant (manual control) Safety enclosure with Siemens PLC 2 × SICK laser scanners 4 × Light curtains

Year of construction: 2019, condition: good (used), functionality: fully functional, UK250 tabletop rewinder · Gepard 500 2019 20–250 mm 510 mm 1–3 inches; up to 6 inches with adapter 1–21 N · 6 bar Up to 500 m/min, depending on the material and winding diameter. Djde Aiu Trjpfx Ap Aswd

Condition: good (used), Year of construction: 2014, FOCUS · Proflex 250 2014 Flexographic printing · 4 units with IR drying 250 mm Dwodpfe Aiu Tkjx Ap Ajd 250 mm 7–20 inches (180–510 mm), as specified in the data sheet 100 m/min

Condition: used, Year of construction: 2006, Chain-type tool magazine: 60, commissioning date: 26.07.2007, scraper-type chip conveyor, spindle max. 14000rpm, NC table with a min. indexing increment of 0.001°, pallet positioning with a minimum angular increment of 0.001° instead of the standard version with 1°, chain-type tool magazine with 60 positions, I/F for 70bar high-pressure coolant system (with side-through spindle coolant supply), DLAB 50F transformer: 54kVA, control options: ATA card, AI Contour Control and Fast Data Server, coolant gun for cleaning workpieces and fixtures, control: MSX-701 III, NC software: G103/02.4, PLC software: I81191A08, MAPPS I98143B47, machining time: approx. 13901h, power-on time: approx. 32187h, weight: 12.4t. Inspection possible by arrangement. Djdpfx Apo Aiu R Ee Aewd

Condition: used, Year of construction: 1991, Offered is a tenoning machine with a sliding carriage. Multiple sawing and moulding units, workpiece support with clamping device, protective hoods, dust extraction connections, operation via pushbuttons and main switch, emergency stop present. Inspection possible by arrangement. Dsdpfx As Aiu R Nsp Aewd

Condition: used, Offered is a panel saw with vertical workpiece support. Upright support frame, horizontal support rails, guided saw beam, dust extraction hose at the saw unit. Inspection possible by arrangement. Dwjdpj Aiu R Tefx Ap Aed

Year of construction: 1990, condition: used, Offered is a CNC lathe with a tool turret. Control: TRAUB SYSTEM TX-8-D, collet chuck, tailstock with center. Inspection possible by arrangement. Dwjds Aiu Sbjpfx Ap Aed

Year of construction: 1961, condition: used, Offered is a universal milling machine with a vertical milling head. T-slotted worktable, handwheels for axis adjustment, coolant hose, conventional operation via handwheels, selector levers and electrical controls. Inspection possible by arrangement. Dwedpfx Ae Aiu Sfjp Asd

Condition: used, Offered is a coolant filtration system with belt filtration. Filter fleece roll, motor-driven filter belt, fluid tank, pump unit, pipework, separate collection containers. Inspection possible by arrangement. Dsdpfx Ape Aiu Sis Ajwd

Condition: used, Offered is a straightening press with hand lever operation. Vertical straightening ram, support table, affixed operating instructions for straightening workpieces based on runout measurement and for adjusting the straightening stroke. Inspection possible by arrangement. Dedpfx Apo Aiu Sme Aswd

Condition: used, Offered is a chuck with three jaws. Maximum rotational speed: 900rpm, maximum actuation torque: 350Nm, maximum total clamping force ΣS: 27000daN, central through-hole, radial grooves on the chuck face, separate set of three top jaws shown. Inspection possible by arrangement. Dwedo Aiu Sqjpfx Ap Aed

Year of construction: 2001, condition: used, Offered is a CNC surface grinding machine with a magnetic chuck. Working range X/Y: 600mm/305mm, working height: 366mm, grinding spindle power: 10kW, permissible peripheral speed: 35m/s, grinding wheel diameter: 300mm, grinding wheel widths X/Y/Z: 25mm/30mm/50mm, table size: 600mm × 250mm, X-axis feed rate: 1000-24000mm/min, Y/Z-axis feed rate: 0.1-2000mm/min each, control: Siemens SINUMERIK 840, magnetic chuck X/X 600mm/2500mm. Inspection possible by arrangement. Dwjdpfx Ae Aiu Susp Ajd

Year of construction: 1998, condition: used, Paper size: 210-480x280-660mm, max. print area: 464x655mm, printing plate size: 490x660mm, max. printing speed: 10,000sheets/h, powder spray system: Weko powder spray system, power consumption: 7.1kW, length: 1720mm, width: 1450mm, height: 1605mm, weight: 2.19t, an on-site inspection is possible. Dsde Aiu Sxopfx Ap Aewd

Condition: used, Max. cutting width: 760mm, max. insertion depth: 760mm, max. stack height: 110mm, table height: 900mm, length: 1750mm, width: 1520mm, height: 1400mm, weight: 1.04t, an on-site inspection is possible. Dwodpfxj Aiu S As Ap Aod

Year of construction: 2021, condition: used, Offered is a lightly used edge sander with pneumatic belt tensioning. Operating pressure: 6bar, pressure limit: 7bar, tiltable sanding unit with angle scale, front worktable, additional table at the idler roller, dust extraction connection, compressed air filter regulator with pressure gauge, an operating manual and additional sanding belts included. Inspection possible by arrangement. Dedpfxs Aiu S Hj Ap Aewd

Condition: used, Equipment: inking unit, dampening unit, printing cylinder, mechanical adjustment levers, safety guard, counter, counter reading: 63,647,783, an on-site inspection is possible. Dwodpfx Apo Aiu S Re Asd

Condition: used, Sheet size: 104.8-381x149.2-520.7mm, inside dimensions of the chase: 362x476.3mm, required floor space: 255 Dwodpfxs Aiu S Us Ap Aed

Year of construction: 1985, condition: used, Equipment: flat pile feeder, folding plates, folding rollers, second folding station, mechanical format adjustment, control panels, emergency stop devices, an on-site inspection is possible. Dodpfe Aiu Tcex Ap Aewd

Condition: used, Year of construction: 2005, Schaeff-Terex HR 32 Crawler Excavator Dwedpfj Aiu Rzex Ap Aod - Year of manufacture 2005 - Weight: approx. 8000 kg - Power: 54 kW

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Fanuc Series 180iS-WB control system Travel ranges: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm Max. workpiece weight: 500 kg Dwjdpfx Ao Aiu Rwsp Ajd Machine weight: 1,700 kg Power supply: 13 kVA The machine can be inspected while powered on.

Year of construction: 2009, condition: good (used), functionality: fully functional, machine/vehicle number: 680, Leakage testing device for flue ducts, including a set of accessories for smoke testing. Dwedpfx As Aiu Rtop Aod