Logisticspot

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 7,716 h, load capacity: 20,000 kg, lifting height: 3,300 mm, fuel type: gas, mast type: simplex, construction height: 3,300 mm, fork carriage width: 1,900 mm, empty load weight: 22,100 kg, total length: 3,800 mm, drive type: Treibgas, construction width: 1,900 mm, Compact forklift – internal combustion engine Load center: 500 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Description: In addition to this RMF model, we have approximately 200 heavy-duty forklifts, compact forklifts, and reach trucks in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this MAXEIN DWB 200/500G. Gjdpfx Aijzuhfuj Sska P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and custom modification of forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale at our location. Side shifter, fork positioner, Heater, full cabin

Condition: ready for operation (used), Year of construction: 2010, working width: 1,350 mm, Belt sander manufactured in 2010. This VIET S3 333 features a working width of 1350 mm and accommodates workpiece thickness from 3 to 160 mm. It includes three sanding units with powerful 4 kW motors and a conveyor group speed of 3-16 m/min. If you are looking to get high-quality sanding capabilities, consider the VIET S3 333 belt sander we have for sale. Contact us for further details. • 1st Sanding Unit (Composition): Spinbrush • 1st Sanding Unit (Motorization): INV 4 kW Gkedpfjzuhfnox Ai Ssa • 2nd Sanding Unit (Composition): Brush • 2nd Sanding Unit (Motorization): INV 4 kW • 3rd Sanding Unit (Composition): Brush • 3rd Sanding Unit (Motorization): INV 4 kW • Conveyor Group: 3–16 m/min • Conveyor Group (Motorization): INV 3 kW • Adjustment/Rise (Motorization): MTR 0.37 kW • Vacuum Pump (Motorization): MT 4 kW • Mass: 4170 kg • Workpiece Thickness: 3–160 mm • Operating Voltage: 3 AC - 400 V • Frequency: 50 Hz • Current Draw: 48.9 A • Motor with Max Current Draw: 8 A • Minimum Compressed Air Pressure: 6 - 86 bar-Psi • Maximum Compressed Air Pressure: 8 - 116 bar-Psi • Compressed Air Consumption: 1441 Nl/min • Minimum Suction Flow Speed: 25 m/s • Minimum Suction Capacity: 6190 m³/h • Noise Level (Idle): 75 dB(A) • Noise Level (Operating): 76 dB(A)

Condition: ready for operation (used), Year of construction: 2022, This 5s LEADERMAC Compact LMC-530C was manufactured in 2022. It features a working width of 15 – 300 mm and a working thickness of 10 – 150 mm, making it suitable for various woodworking applications. With multiple spindles and a Schneider 5.7” EASYSET touchscreen control, this machine offers advanced capabilities. Consider the opportunity to buy this LEADERMAC Compact LMC-530C wood planer. Contact us for further details. • Ref.: e/haaaa/dc • Working width: 15–300 mm • Working thickness: 10–150 mm • Minimum workpiece length: 800 mm • Minimum consecutive length: 300 mm • Infeed table: 2500 mm • Pneumatic left side pressure roller • Two-piece pressure shoe • Schneider 5.7" EASYSET touchscreen control • NC control axis 3 (left radial) • NC control axis 4 (top radial) • NC control for pressure beam height adjustment • Feed motor: 7.5 HP, feed speed 6–24 m/min • 1st spindle: 15 HP, Ø50 mm, 6,000 rpm Gsdpfxjzuhfhj Ai Sska • 2nd spindle: 10 HP, Ø50 mm, 6,000 rpm • 3rd spindle: 10 HP, Ø50 mm, 6,000 rpm • 4th spindle: 20 HP, Ø50 mm, 6,000 rpm • 5th spindle: 20 HP, Ø50 mm, 6,000 rpm Additional equipment • Additional table for multi-rip saw • Anti-kickback device for multi-rip saw

Year of construction: 2023, operating hours: 770 h, condition: ready for operation (used), Wood production line manufactured in 2023. This ISM ATM-01 is a custom-made automatic production line designed for the fully automated manufacturing of wooden garden screens from individual planks. It features automatic discharge and stacking of finished screens, tilting stacks for efficient processing, and is adjustable for five different screen types. If you are looking to get high-quality wood processing capabilities, consider the ISM ATM-01 machine we have for sale. Contact us for further details. • Type: Automatic production line for wooden garden screens (custom-made) • Process: Manual loading of planks and intermediate slats into magazines; fully automatic production thereafter • Features: • Automatic discharge and stacking of finished screens • Tilting stacks for efficient processing • Adjustable for 5 different screen types • Last maintenance: June 2025 • Documentation: User manual, spare parts list, technical drawings, CE dossier Gkedpfx Aszuhfbji Sea

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details. • Liquid spray unit (ADZ) • Pre-milling unit (RT) • PU gluing unit (SP10, Nordson) • Edge trimmer (IT90) • Balance tool trimmer (RS10) • Fine milling unit (RF40) • Rounding unit (AR60) • Edge scraper (RB40) • Glue scraper unit (RC20) • Swaying brushes • Edge heater (PH10) Gkjdpfxjzuhd Rs Ai Soa

Year of construction: 2011, condition: ready for operation (used), Coating/varnishing machine manufactured in 2011. This CEFLA Smartparquet MRF-2VS/300 features a working width of 300 mm and a total installed power of 6 kW. If you are looking to get high-quality coating capabilities, consider the CEFLA Smartparquet MRF-2VS/300 machine we have for sale. Contact us for further details. • Main electronic connection: V 400 Hz 50 Gjdpfxjzuhd Dj Ai Sjka • Power consumption: KW 6 • Roller coating / varnishing machine • Measurements width: 300 mm working width

Condition: ready for operation (used), Year of construction: 2018, Optimizing Cross-Cut Saw manufactured in 2018. This WEINIG DIMTER Opticut S90 features a saw blade diameter of 500 mm and a maximum cutting height of 120 mm. It accommodates input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking to get high-quality cutting capabilities, consider the WEINIG DIMTER Opticut S90 machine we have for sale. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40–100% via frequency converter • Workpiece capacity • Input length (min/max): 400–6,300 mm • Width (min/max): 20–300 mm • Thickness (min/max): 10–120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max 2 mm/m or 8 mm over entire length • Table inclination: 10° • Motion and accuracy • Positioning speed (reverse stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical load: approx. 15 kW • Control and interface Gjdpfx Aszuhdwoi Soka • Control unit: OptiCom Pro with 18.5" touch screen • Screen resolution: 1366 x 768 pixels • Protection class (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Utilities and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6–8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction connection: diameter 125 mm • Required extraction performance: speed approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Condition: ready for operation (used), Year of construction: 2015, number of axes: 4, This 4-axis Weeke PROFI BMG211/32/12/K was manufactured in 2015. It operates on a supply voltage of 400 V / 230 V and is designed for 3-phase power with a maximum operating full load current of 38 A. If you are looking to get high-quality CNC wood machining capabilities, consider the Weeke PROFI BMG211/32/12/K machine we have for sale. Contact us for further details. • Supply Voltage: 400 V / 230 V • Phase: 3 Phase • Frequency: 50 Hz • Maximum Operating Full Load Current: 38 A • Fuse Rating: 50 A Gkodpszuhdqsfx Ai Sea • Control Voltage: 24 V • CE Marking • Sold without toolsUpon request, we can also offer suitable extraction systems (currently eligible for funding in Germany) and compressed air solutions

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 3,460 mm, travel distance Y-axis: 1,615 mm, travel distance Z-axis: 400 mm, number of axes: 5, overall weight: 3,500 kg, spindle motor power: 11,000 W, spindle speed (max.): 20,000 rpm, This 5-axis MORBIDELLI Author X5 was manufactured in 2008. It features a working field of 3050 mm in the X direction, 1348 mm in the Y direction, and 400 mm in the Z direction. The machine is equipped with a powerful 11 kW spindle and a tool changer with 12 positions. If you are looking to get high-quality CNC wood machining capabilities, consider the MORBIDELLI Author X5 machine we have for sale. Contact us for further details. • Voltage: 400 V • Frequency: 50 Hz • Current: 48 A • Power supply: 400 V, 50/60 Hz • Power consumption: 28 kVA • Working field: X 3050 mm, Y 1348 mm, Z 400 mm • Rapid speeds: X 50 m/min, Y 45 m/min, Z 22 m/min • Drive system: ball screw in X/Y/Z axes • Pendulum processing: yes • Spindle: 5-axis Morbidelli milling spindle • C axis rotation: 640 degrees • B axis rotation: +/- 100 degrees • Inverter power: 18 kW • Tool holder: HSK 63F • Minimum distance table to spindle: 40 mm • Tool changer: rear tool room in X axis • Tool changer positions: 12 • Max tool diameter: 240 mm • Max tool length: 220 mm • Max tool weight: 8 kg • Work table: vacuum clamping system • Vacuum pressure: 3000 Pascal • Control system: NUM 1040 • Operating system: Windows XP Professional Gsdszuhdkjpfx Ai Soka • Processor: 32-bit Pentium • RAM: minimum 256 MB • Hard disk: minimum 2 GB • Screen: 17 inch • Interface: RS232 • Air pressure: 6 to 8 bar • Air consumption: 250 NL/min • Dust extraction connection: 250 mm • Air speed extraction: 30 m/s • Machine dimensions: approx. 5300 x 2200 x 2500 mm • Required space: approx. 6300 x 4000 x 3000 mm • Safety equipment: CE-compliant protection system • Central lubrication: automatic • Drilling head: 12 + 6 spindles • Vertical spindles (Y direction): 5 • Vertical spindles (X direction): 8 • Horizontal spindles (X direction): 4 • Horizontal spindles (Y direction): 2 • Vertical spindle pitch: 32 mm • Horizontal spindle pitch: 64 mm • Drilling speed: 4000 rpm • Drilling unit power: 2.2 kW • Drilling tool holder: M10 • Pneumatic stroke: 60 mm Additional equipment • Chip conveyor (included) • Vacuum pump 250 m3/h

Condition: ready for operation (used), Year of construction: 1999, Panel sizing and solid wood saw manufactured in 1999. This PANHANS 693 / EURO 5 features a maximum cutting width of 4200 mm and is equipped with an air cushion table for enhanced efficiency. The machine includes a main saw, scoring saw, and automatic feed system. If you are looking to get high-quality panel cutting capabilities, consider the PANHANS 693 / EURO 5 machine we have for sale. Contact us for further details. PANHANS 693 / EURO 5 Godjzuhddjpfx Ai Sska • Machine Type: Panel Sizing and Solid Wood Saw • Nominal Voltage: 400 V • Current Type: 3-Phase AC • Operating Current: 34 A • Frequency: 50 Hz • Control Voltage: 24 V AC/DC • Back-up Fuse: 35 A • Maximum Pneumatic Pressure: 8 bar • Control Unit Brand: ELINDE • Control Unit Model: EL1 • Electrical Components • Feed Drive: Lenze • Rip Fence Servo Drive: Lenze • Safety Relay: Pilz • Power Supply: Siemens SITOP PSU100S Machine Functions • Main Saw • Scoring Saw • Feed Drive • Rip Fence Servo System • Automatic Feed • Rip Fence Additional Information • Machine was only lightly used • Equipped with new Siemens control boards • Maximum Cutting Width: 4200 mm • Air Cushion Table • New Spare Saw Blade • Condition: Good

Condition: ready for operation (used), Year of construction: 2004, total height: 2,600 mm, total width: 6,800 mm, product length (max.): 40,000 mm, Double sided edgebander manufactured in 2004. This HOMAG KBZ KFR20 / KFR526 complete production line features a turning station and a Bargstedt stacker. It is designed for formatting, milling, seaming, grooving, and edging panels in a single work process, specifically for storage and partition wall elements. If you are looking to get high-quality edging capabilities, consider the HOMAG KBZ KFR20 / KFR526 machine we have for sale. Contact us for further details. - Machine Type: Complete production line with turning station and Bargstedt stacker- Components:* M.01: OPTIMAT TBR100/30/12 (HOMAG)* M.02: PROF. KFR20/16/A3/15 (HOMAG)* M.03: OPTIMAT TDR310/30/12 (HOMAG)* M.04: OPTIMAT KFR526/10/A3/35 (HOMAG)* M.05: TFR560/S/R/24/21/3 (BARGSTEDT)* M.06: PROF. TSP410/ER/35/12/S (BARGSTEDT)- Length: 40m- Width: 6.8m- Height: 2.6m (with hoods/flaps open)- Function: Panels are formatted, milled, seamed, grooved, and edged in a single work process; specially configured for the production of storage and partition wall elements- Workpiece Length: min. 250 mm - max. 3,200 mm- Workpiece Width: min. 250 mm - max. 1,350 mm- Workpiece Thickness: min. 15 mm - max. 57 mm Gsdpfxozuhc To Ai Seka

Condition: ready for operation (used), Year of construction: 1999, total height: 1,917 mm, total width: 1,200 mm, product length (max.): 9,295 mm, Edgebander manufactured in 1999. This HOMAG Optimat KL 78/A20/S2 features a panel formatting milling cutter, bevel and rounding milling cutter, groove saw, and edge draw blade. It accommodates workpieces with a thickness range of 8 to 60 mm and has a working height of 950 mm. If you are looking to get high-quality edging capabilities, consider the HOMAG Optimat KL 78/A20/S2 machine we have for sale. Contact us for further details. Godpfxezuhc Hs Ai Seka - Equipment: Panel formatting milling cutter, bevel and rounding milling cutter, groove saw, edge draw blade- Additional Equipment: Bühnen PU melting unit (with dedicated blue control box and temperature controllers)- Work Piece Length: min. 120 mm- Work Piece Width: min. 120 mm- Work Piece Thickness: min. 8 - max. 60 mm- Working Height: 950 mm- Machine Dimensions (from floor plan): Length 9295 mm, Total Height 1917 mm (approx. 2275 mm with open hood / noise enclosure open), Working line width approx. 1200 mm- Space Requirements: Length 9.6 m, Width min. 2.5 m, Height 2.3 m (flaps open)- Voltage: 400 V- Frequency: 50 Hz- Current: 55 A- Recommended Fuse: 63 A- Control Voltage: 24 V- Total Extraction Capacity: approx. 6010 m³/h- Air Speed: 28 m/sec- Compressed Air Consumption: approx. 816 NL/min- Pressure Drop: 200 mm WS- Electrical Connected Load: 32 kW- Extraction Connections: 3x Diameter 120 mm, 2x Diameter 60 mm

Condition: ready for operation (used), Year of construction: 1999, total width: 8,500 mm, total height: 2,500 mm, product length (max.): 26,000 mm, Panel saw manufactured in 1999. This HOLZMA HPV11 features a maximum panel dimension of 2,100 x 4,100 mm and can cut up to 6 panels simultaneously. It includes lifting tables and a Liftomat, along with an automatically height-adjustable clearing table. If you are looking to get high-quality cutting capabilities, consider the HOLZMA HPV11 panel saw we have for sale. Contact us for further details. Gkjdpfxjzuhcys Ai Soa - Voltage: 400 V- Frequency: 50 Hz- Phase / Wiring: 3 ~ + N- Current (Amperage): 80 A- Control Voltage: 24 V- Included Equipment: Equipped with lifting tables and Liftomat- Loading Capacity: 3 stockyards with 25 panels each- Maximum Panel Dimension: 2,100 x 4,100 mm- Capacity: Up to 6 panels can be cut simultaneously- Discharging Table: Automatically height-adjustable clearing table- Special Features: Cut layout optimization for maximum material utilization and low waste

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 3,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 50 mm, number of axes: 3, total height: 1,950 mm, total width: 1,500 mm, overall weight: 850 kg, product length (max.): 2,100 mm, This 3-axis FORMAT4 c-express 920 classic was manufactured in 2018. It features a maximum workpiece dimension of 3000 mm in the X direction and 920 mm in the Y direction, with a robust clamping collet system for CNC through-feed technology. The machine is equipped with 6 vertical and 9 horizontal drilling spindles, allowing for versatile drilling, sawing, and milling operations. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 c-express 920 classic machine we have for sale. Contact us for further details. • Voltage: 400 V • Phase: 3 Ph • Frequency: 50 Hz • Current: 22 A • Power: 7.0 kW • Duty Cycle: S6 40% • CNC Drilling Center c-express 920 classic • Clamping Collet System for CNC Through-Feed Technology • Drilling, Sawing and Milling Operations from Below • Laser "0" Double Reference • Drilling Head: DH15 • 6 Vertical Drilling Spindles • 9 Horizontal Drilling Spindles • 1 Grooving Saw in X Direction • Graphical User Interface • Machine Software License: 1 • CE Conformity • Maximum Workpiece Dimensions (X × Y × Z): 3000 × 920 × 50 mm • Minimum Workpiece Dimensions (X × Y × Z): 280 × 180 × 10 mm • 19" LCD Color Display • Mouse and Keyboard • Packed on Pallet: 2100 × 1500 mm Tools: • HW circular saw blade 100 × 5 / 3.6 × 20 Z24 / FZ • DP end mill D12 / NL23.5 / Z2+2+Q / GL80 / S20 / RL • ER32 collet, Ø20 mm Gjdpfxszuhcts Ai Sjka • Drill bit Ø5 mm LL (3×) • Drill bit Ø5 mm RL (2×) • Drill bit Ø8 mm LL (4×) • Drill bit Ø8 mm RL (3×) • Through drill bit Ø5 mm LL (1×) • Drill bit Ø15 mm RL (1×) • Drill bit Ø35 mm RL (1×) • End mill Ø8 mm (1×) • End mill Ø10 mm (1×)Upon request, we can also offer suitable extraction systems (currently eligible for funding in Germany) and compressed air solutions

Condition: ready for operation (used), Year of construction: 2003, Wood Band Saw manufactured in 2003. This WOOD-MIZER LT40 features a fully hydraulic system and is powered by a 3-year-old Kohler petrol engine with 1100 hours of use. The total operating hours are 4300, and the saw was fully serviced in 2026, ensuring it is fully functional. If you are looking to get high-quality sawing capabilities, consider the WOOD-MIZER LT40 machine we have for sale. Contact us for further details. Gksdpszuhcmefx Ai Sea • Configuration: Fully hydraulic saw • Engine: Kohler petrol, 3-year-old, 1,100 engine hours • Total machine hours: 4,300 • Service/Condition: Fully serviced in 2026; fully functional

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 80 mm, number of axes: 3, overall weight: 5,200 kg, spindle motor power: 7,500 W, spindle speed (max.): 24,000 rpm, This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details. • Number of milling spindles: 2 • Tool clamping system: HSK-F63 • Vertical drill spindles: 96 Gjdpfozuhcgjx Ai Seka • Horizontal drills (X/Y): 32 / 4 • CE mark Additional equipment • Barcode reader • Enclosed fence • Light barrier • DXF interface • Software: SCM XILOG PLUS

Condition: ready for operation (used), Year of construction: 2019, This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine. Machine Benefits Gkedpfezuhcasx Ai Soa Technical Machine Benefits • For connection to existing heating system / pressing temperature up to 90°c / the fabricated steel platen can take a maximum pressure of 5kg/cm²Plate: 110 X 240 cm, 120T, 5kg/cm2

Condition: ready for operation (used), Year of construction: 2024, This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a turntable magazine with a diameter of 750 mm for edging material ranging from 0.4-3 mm, a GlueBox application unit, and upper and lower polishing units. The machine includes advanced x-motion Plus control with a 15' SmartTouch screen and a multifunctional milling unit for precise plastic edge machining. Contact us for more information about this machine. Additional equipment • Application unit with Teflon coating for 1.5 kg EVA granulate • Upper and lower polishing unit Machine Benefits Technical Machine Benefits • Positioning workpiece height adjustment: 8-60 mm • Turntable magazine diameter: 750 mm for edging material 0. 4-3 mm in roll • Rotary magazine of edging material with ball bearing, diameter of plate: 740 mm Gsdpjzuhb Nefx Ai Sska • Gluebox application unit • Trimming unit with two motors: 0. 35 kw (1 ps), 12000 rpm hw saw blades, z 24, d-100x20x3. 2 mm, pneumatic tilting 0°-10° • Upper and lower multifunctional milling unit // upper and lower profile sander x-motion plus for machining plastic edges 2 and 3 mm • Controlled corner unit with 2 motors, motorized adjustment for milling the front profiles of the upper/lower edge for edge thicknesses of 0. 4-3 mm and feed rates up to 10 m/min • Pre-milling unit with assigned diamond-tipped cutters, speed ​​12000 rpm, 2x 1. 5 kw • Edge and workpiece thickness measurement using bluetooth technology Extra Information Power supply: 3x400V 50/60Hz Chain feed with 2 gears, Feed rates: 10 and 18 m/min Control Unit x-motion Plus control with 15' SmartTouch

Condition: ready for operation (used), Year of construction: 2019, Multi-spindle drilling machine manufactured in 2019. This COMEC FMOV 1500 6UF + CA2 features a working width of 1500 mm and a working depth of 300 mm, allowing for efficient processing of long workpieces up to 1500 mm in one cycle. It includes an automatic parts loader and pneumatic clamping for enhanced productivity. If you are looking to get high-quality drilling capabilities, consider the COMEC FMOV 1500 6UF + CA2 machine we have for sale. Contact us for further details. • Configuration: 6 multiple heads arranged on 3 working lines • Workpiece capacity: Drilling of long workpieces up to 1500 mm in one cycle • Working width (X): 1500 mm • Working depth (Y): 300 mm • Max. clamping height: 70 mm • Top surface processing: Yes • Horizontal processing: Yes • Interchangeable aggregates: Yes • Positioning: Manual • Drilling feed: Pneumatic • Clamping: Pneumatic • Control: PLC with selectable work cycles • Modularity/customization: High Godpfx Ajzuhb Aji Soka • Cleaning and waste system: Integrated, efficient • Certification: CE Additional equipment • Automatic parts loader (synchronized with the machine cycle)

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, number of axes: 6, spindle speed (max.): 24,000 rpm, This 6-axis BACCI TWIN CNC Wood Machining Centre was manufactured in 2001. It features an impressive X-axis travel of 3400 mm, Y-axis travel of 1500 mm, and Z-axis travel of 1000 mm. The machine is equipped with 4 milling heads that can reach speeds of up to 24,000 rpm and includes 2 tables and 2 vacuum units. If you are looking to get high-quality wood machining capabilities, consider the BACCI TWIN machine we have for sale. Contact us for further details. • Rotary axes: B rotation = no limit; C rotation = 400° • Rapids/axis speeds: X = 100 m/min; Y = 60 m/min; Z = 60 m/min • Milling: 4 milling heads, 0–24,000 rpm, ER32 mounting, max tool diameter 200 mm • Workholding/table: 2 tables • Condition: Fully working Gjdpozuhbvofx Ai Soka Additional equipment • 2 vacuum units • Dust and noise protection cabinet

Condition: ready for operation (used), Year of construction: 2016, working width: 200 mm, total width: 1,635 mm, total height: 1,730 mm, overall weight: 3,750 kg, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: Smart Line, spindle motor power: 5,500 W, product length (max.): 3,850 mm, This 6-axis REIGNMAC 520 Moulding Master was manufactured in 2016. It features a working width of 20–200 mm and a working thickness of 8–120 mm, with a feed speed of 6–24 m/min. The machine is equipped with six spindles, with a spindle speed of 6000 rpm and a maximum tool diameter of Ø145 mm. If you are looking to get high-quality woodworking capabilities, consider the REIGNMAC 520 Moulding Master machine we have for sale. Contact us for further details. • Working width: 20–200 mm Gkjdpfjzuhbpox Ai Sea • Working thickness: 8–120 mm • Feed speed: 6–24 m/min • Working table length: 1700 mm • Pressure beam vertical adjustment: 10 mm • Infeed table adjustment: 10 mm • Spindle configuration: • Number of spindles: 6 • Spindle diameter: 40 mm • Maximum tool diameter: • First bottom spindle: 108–145 mm • Right/left spindles: 108 mm • Top spindle: 140 mm • Bottom finishing spindle: 96 mm • Motor power: • Feed motor: 5.5 kW (7.5 HP) • Right spindle motor: 5.5 kW (7.5 HP) • Left spindle motor: 5.5 kW (7.5 HP) • Top spindle motor: 7.5 kW (10 HP) • Bottom spindle motor: 5.5 kW (7.5 HP) • Feed beam lifting motor: 1.1 kW • Total installed power: 28.6 kW Additional equipment • Safety cabin included

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Godpfjzuhbiex Ai Sjka Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Condition: ready for operation (used), Year of construction: 2013, CNC Panel Saw for wood and wood-based materials manufactured in 2013. This PANHANS S45 Speed features a maximum cutting length of approximately 4,200 mm and a cutting width of around 3,200 mm. It includes an automatic tilting saw blade for precise angular cuts and a modern CNC/PC control system. If you are looking to get high-quality cutting capabilities, consider the PANHANS S45 Speed machine we have for sale. Contact us for further details. • Condition: Excellent – fully functional, very well maintained, low usage, ready for immediate operationTechnical specifications • Max cutting length: approx. 4,200 mm (depending on configuration) Gkjdpjzuhbcofx Ai Ssa • Max cutting width: approx. 3,200 mm • Saw blade tilting range: 0° to approx. 45° • Max cutting height at 0°: approx. 72 mm • Main saw motor power: approx. 14 kW • Scoring blade diameter: approx. 180 mm • Saw carriage feed speed: up to 100 m/min (forward/backward, Speed version) • Control system: CNC/PC controlEquipment and features • Automatic tilting saw blade for angular cuts • Optimized cutting cycles (single, multiple, batch) • Program-controlled pusher for accurate positioning • Integrated scoring unit for clean cuts • Air tables (3x) for easy handling of large panels • Format and angular cutting system Additional equipment • Saw blades • Scoring blades • Optional optimization software

Condition: new, empty load weight: 4,650 kg, maximum load weight: 14,350 kg, overall weight: 19,000 kg, axle configuration: 2 axles, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, , with hydraulic tailgate, three-sided tipper, sideboards 600 mm high, galvanized, loading height approx. 1,080 mm, 4 x lashing eyes, each with a capacity of 5 tons, embedded in the floor, 8 x lashing eyes, each with a capacity of 3 tons, embedded in the floor, reinforced gearbox support winch with load and fast-running gear at the front, 435/50 R 19.5, chassis hot-dip galvanized and tipper body hot-dip galvanized or painted, surcharge for: aluminum ramps (approx. 3,500 mm long) and 2 folding supports at the rear, price: 1,900 euros, printing errors, errors and changes excepted, sample images, more details under: !, more details: ! Gksdpfozug Uhjx Ai Sea

Condition: new, empty load weight: 4,460 kg, maximum load weight: 14,540 kg, overall weight: 19,000 kg, axle configuration: 2 axles, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, sideboards 600 mm high, galvanized, loading height approx. 1,080 mm, 4 x lashing eyes, each rated at 5 tons, embedded in the floor, 8 x lashing eyes, each rated at 3 tons, embedded in the floor, reinforced gearbox support winch with load and fast-running gear at the front, 435/50 R 19.5, chassis and tipper body hot-dip galvanized, surcharge for: aluminum ramps (approx. 3,500 mm long) and 2 folding supports at the rear, price: 1,900 euros, printing errors, errors and changes excepted, sample images, more data at: ! Gedpfezug Ubjx Ai Sjka