Lohnfertigung mech. Bauteile

Condition: used, Hydraulic machine vise, high-pressure clamping device RÖHM Type 740 RA 4 Jaw width: 160 mm Jaw height: 75 mm Chedpfxsz It Rto Aa Tjc Clamping force: 4 tons Clamping range: 0 to 300 mm Opening width: max. 305 mm Clamping range: max. 100 mm (per step) Guide rail height: 85 mm - 3 clamping ranges adjustable via locking pins Dimensions L x W x H: 570 x 240 x 165 mm Weight: 60 kg Good condition

Condition: ready for operation (used), functionality: fully functional, NC machine vice / HOMGE HPAQ - 160 MULTIPOWER Chjdpsz Hzatefx Aa Tsc -CLAMPING RANGE / 750mm -Jaw width 160mm -Overall height 220mm -Overall length 1100mm -Total weight approx. 120 KG Errors and omissions excepted.

Condition: good (used), Vise, bench vise, locksmith's vise, parallel vise, heavy-duty vise -Parallel vise: height adjustable, jaw width 180 x 30 mm -Wingspan: 235 mm -Dimensions: 540/230/H590 mm Cedsz Hxa Repfx Aa Tohc -Weight: 38 kg

Condition: good (used), 5-axis clamping system ATORN 5 AX 100 Version 7.1 Chsdez Huchjpfx Aa Toc (2 pieces including base plate, can be used with zero-point clamping systems) - Jaw width: 100 mm - Clamping height: 250 mm - Clamping range up to 550 mm (reducible to 175 mm or 200 mm) In very good condition.

Condition: like new (used), functionality: fully functional, jaw width: 135 mm, For sale is a Röhm vise, type RB-K 135, in new condition. Chsdsz Hixkopfx Aa Tec

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 70 mm, total length: 500 mm, total width: 150 mm, Equipment: type plate available, We are offering this used CHICK 500 x 150 x 70, manufactured in 2021. 3 units in various sizes, with new and used top jaws. Cjdez Ekqfspfx Aa Tohc Manufacturer: CHICK Model: 500 x 150 x 70 mm Year of manufacture: 2021 Condition: used Category ID: 234 Part number: 5QL1540 Serial number: 030713A104 1 unit 400 x 150 x 70 1 unit 400 x 100 x 65 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2018, overall weight: 50 kg, total height: 150 mm, total length: 830 mm, total width: 180 mm, Metal cutting Tooling CERATIZIT - CORALINE HDG-2 MACH-ID 9707 Make: CERATIZIT Type: CORALINE HDG-2 Year: 2018 Length:830mm Width:180mm Height:150mm Weight:50kg Chedpfx Ajz Dtzkea Toc Length:830mm Width:180mm Height:150mm Weight:50kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1999, overall weight: 40 kg, total height: 105 mm, total length: 580 mm, total width: 110 mm, Metal cutting Tooling GRESSEL - Grefors 100mm MACH-ID 9709 Make: GRESSEL Type: Grefors 100mm Year: 1999 Length:580mm Width:110mm Height:105mm Codpfx Aoz A Tu Isa Tohc Weight:40kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2012, overall weight: 55 kg, total height: 120 mm, total length: 490 mm, total width: 125 mm, Metal cutting Tooling GRESSEL - Duogrip 125mm MACH-ID 9710 Make: GRESSEL Type: Duogrip 125mm Year: 2012 Length:490mm Cjdpfxez Arige Aa Tohc Width:125mm Height:120mm Weight:55kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), overall weight: 32 kg, total height: 125 mm, total length: 430 mm, total width: 130 mm, Metal cutting Tooling HILMA - TYP 125 MACH-ID 9714 Make: HILMA Type: TYP 125 Length:430mm Width:130mm Height:125mm Weight:32kg Chodpfx Aaoz Arhio Tjc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, jaw width: 160 mm, clamping range: 200 mm, For sale: 3 used Allmatic vises. Cjdpfx Aozzk R Hja Tjhc Price per unit: €1,000.

Condition: used, The SCHUNK single clamps KONTEC KSC-F are a perfect equipment for palletizing systems. Thanks to the system modular construction kit, VERO-S interface and 160° rapid clamping, they can be adapted to new clamping tasks in the shortest possible time. Wrench width: 125 mm Cedpfx Aajzzkt Ij Tshc Max. Span: 230 mm Max. Clamping force: 40 kN Total 4 pieces available, price per vise: 900 € Like new condition

Condition: used, thickness of jaw 160 mm 50 mm clamping width 245 mm clamping capacity 6,0 t weight 60 kg dimensions of the machine ca. 600 x 160 x 165 mm Chedezy Scbopfx Aa Tjc - Serial-no.: 40246

Condition: used, thickness of jaw 160 mm 50 mm clamping width 245 mm clamping capacity 6,0 t weight 60 kg dimensions of the machine ca. 600 x 160 x 165 mm Chedpfx Aajzy Sb Rj Toc - Serial-No.: 40245

Condition: used, Sine vice, 80 mm. Chsdpfx Aozw Uhnja Tsc

Condition: excellent (used), Width of jaws 125 mm Cedpfxezwt Slo Aa Tohc Height of jaws 35 mm Jaw opening max. 260 mm MARCELS MASCHINEN AG

Condition: like new (used), as-new centers and sleeves, MK5 (sleeves and centers with carbide insert) Cjdpfx Aaezv Sd De Tjhc

Condition: used, Mechanical machine vice, WMW Type SX 200 Year of manufacture: 1986 Jaw width: 200 mm Jaw height: 63 mm Clamping range: 0-303 mm Guide rail height: 90 mm Dimensions: 650 x 200 x 152 mm Weight: 70 kg Csdpfozvyvzex Aa Tohc Good condition

Condition: ready for operation (used), 1 unit available We are offering a high-quality GARANT LCV 125 G chuck for professional use in CNC machining centers. This chuck impresses with its high clamping force, precision, and optimal accessibility, making it ideally suited for 5-axis machining and complex milling operations. Technical features: Manufacturer: GARANT Type: LCV 125 G Jaw width: 125 mm High clamping force with a compact design Precise workpiece positioning Cedpszuz R Rofx Aa Tshc Ideal for 5-sided and 5-axis machining Robust industrial design Advantages: High repeatability Optimal accessibility for milling tools Reduced setup times Safe and vibration-free workpiece clamping Suitable for single-part and series production Condition: Used, fully functional. Normal signs of wear from industrial use.

Condition: used, Metalworking vises, EMF 100 Height-adjustable and rotatable Price per unit: €80.00 Chsdpfozugm Rex Aa Tjc

Condition: used, thickness of jaw 125 mm max. clamping width / mm weight / kg length in total / mm Codpfx Aaezndufo Tjhc

Condition: used, thickness of jaw 125 mm max. clamping width / mm Chedozmy S Depfx Aa Tsc weight / kg length in total / mm

Condition: good (used), functionality: fully functional, ALLMATIC NC high-pressure chuck Chedpszlytrjfx Aa Tsc - Type NC 160 - incl. 2 sets of jaws - incl. angular bracket for horizontal machining - incl. base plate 350 x 350 mm

Condition: good (used), Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 125 x 34 mm Chjdpfx Aozlc Ncsa Tec -Clamping depth: 98 mm -Dimensions: 365/125/H70 mm -Weight: 15.7 kg

Condition: used, Hydromechanical, NC machine vise, VIS - HYDRAULIQUE Precision machine vise, spanner Chedpfszin Avjx Aa Tjc Type 20700 Year of manufacture approx. 2000 Jaw width 150 mm Jaw height 42 mm Clamping range 0 to 250 mm Opening width max. 253 mm Clamping force 6 tons Guide rail height 51 mm Guide rail length 450 mm - Hydromechanical machine vise - Quick adjustment with clamping ball lock in a hole grid, 8 positions - Sturdy base body, ground on all sides - Can be clamped horizontally, vertically, or laterally - Guide rail with 20 mm guide groove Dimensions L x W x H 480 x 150 x 107 mm Weight: 30 kg Good condition