Desmaco B.V.

Condition: excellent (used), Year of construction: 2018, Type: 604-518 Serial number: 120002743-10 Year of construction: 2018 Drum: 1.3 mm Compressed air: 6 Bar, 50 l/min Ncsdpfsynau Aox Ahwjn Power: 3 x 415V, 50Hz, 8.5kW Dimensions: 1500 x 1700 x 2400 mm Weight: 1460 kg Working hours: 1465 hours With hopper and tamping device

Condition: used, Tote Bin Lifter for stainless steel meat bins Lifting height: 2050 mm Ncedpfx Aheym U Afowsn Total dimensions: 1050 mm x 900 mm x 2940 mm

Condition: excellent (used), Year of construction: 2012, Vemag Portioner Machine Model MMP220 Year 2012 400-460 V, 3 Ph, 50/60 Hz, 3.5 A, 1.5 kW, 6 bar, weight: 335 kg Njdpfx Ahjym Uc Sswocn Working width: 260 mm, plastic belts, belt width: (2x) 250 mm Dimensions: 1760 mm x 600 mm x 1550 mm In excellent condition

Condition: excellent (used), HP30E with loader. Njdpfx Ahoym T Nqswocn

Condition: used, continuous grilling line all stainless steel adjustable product height with lower and upper belt : bottom and top grilling independent temperature control below and above net length 1.800 mm belt width 600 mm electrically heated ± 90 kW belt washing system above and below Njdsym Rvnepfx Ahwjcn adjustable temperature range per heating plate (6 pieces) capacity up to 250 kg/h depending on the product adjustable speed dimensions (l x b x h): ± 3.000 x 1.650 x 2.400 mm

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Provided for extraction Nsdpfeym Rvbox Ahwecn

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel mobile adjustable speed belt width 900 mm with extra outfeed belt Nsdpfxjym Ruws Ahwscn with air knives dimensions (l x w x h) : ± 3.200 x 1.800 x 2.200 mm 2,73 kW

Condition: used, net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyork washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed 120 kW Nedpoym Rudofx Ahwjcn infeed height: ± 1.000 mm outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 electric power : 26 kW 400V

Condition: ready for operation (used), Kolbe meat grinder. UNGER C 106. Pre-cutter. New knives and plates. 380V. Nedpfx Ahjym A Enowjcn

Condition: used, Year of construction: 2005, We offer the RISCO RS 503 vacuum stuffer with burger attachment— a professional set for large meat processing plants and ready-made meal producers. The machine is ideal for the production of burgers, cutlets, meatballs, minced meat products, and classic sausages, ensuring high efficiency, repeatable portion weight, and excellent stuffing structure. The RS 503 model (2005) is equipped with an advanced RS 70 linear grinder, which grinds the stuffing directly during filling. This system guarantees a uniform structure, better consistency, and higher total yield of the final product. The stuffer operates at a capacity of up to 6,500 kg/h, and the portioning speed reaches 700 portions per minute, which allows it to handle lines with very high production loads. The large 350 l hopper is designed to work with 200 l trolleys, and a special feeding system ensures continuous, even filling of the vane pump chambers – without voids or air intake. The burger attachment, mounted with the stuffer, forms uniform patties from the minced meat onto a conveyor belt, creating a complete line for the production of burgers ready for further heat treatment or packaging. The device is controlled by a panel that allows for easy setting of parameters: stuffing and grinding speed, grinder power, portion size, operating modes, and quick program changes. Thanks to high-performance servo drives, the RISCO RS 503 stuffer can be quickly connected to other devices, such as automatic clippers, dividers, formers, or packaging systems. Technical data: Manufacturer: RISCO Stuffer model: RS 503 Year of manufacture: 2005 Filling machine power supply: 400 V, 3 phases, 50 Hz Installed power: 14 kW Filling machine weight: approx. 1060 kg Filling capacity: up to 6,500 kg/h Ncodeym A A Tspfx Ahwon Portioning speed: up to 700 portions/min Hopper capacity: 350 l (for 200 l trolleys) Burger attachment power supply: 230 V The RISCO RS 503 vacuum filler with burger attachment is the ideal solution for manufacturers who want to combine high performance, precise portioning, and burger forming in one reliable set for large-scale food industry applications.

Condition: refurbished (used), Handtmann VF-608 plus Ncsdpsymybgjfx Ahwon

Condition: used, Baumann dehairer -Type: ST 20 -Dimensions: 2380 x 1000 x 1250 mm -Working dimensions: 1920 mm -With heating -Power supply: 380V 50Hz 3N -Made of stainless steel Nedpsymxm Usfx Ahwocn -Condition: used in very good condition, ready to work

Condition: used, Abele dehairer -Power: 2.2 kW -Two-shaft -With heaters -External dimensions: 2300 x 950 x 1230 mm -Working dimensions: 1700 mm -Power supply: 380V 50Hz 3N -Made of stainless steel Ncedpsymxldofx Ahwen -Condition: used in very good condition, ready to work

Condition: used, Freshline freezer MP Njdpfx Ahjymxg Uswecn Type IQF 1220.15/3070 suitable for nitrogen all stainless steel product height: max. ± 100 mm capacity: ± 5.000 kg / h product load (kg/running meter): ± 13-14 kg / running meter 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatic: 1Nm3/h at 5-7barg LIN pressure nitrogen 3barg net belt width ± 1.220 mm net belt length ± 16.800 mm dimensions (l x w x h) : ± 17.700 x 2.600 x 2.600 mm (max open) in very good condition

Condition: new, new all stainless steel discharging height ± 1.770 – 2.250 mm chain break system 400V – 50 Hz Nsdpeymxgzefx Ahwocn Motor 1.1 kw mobile

Condition: used, cooking length 4.000 mm belt width 600 mm all stainless steel with electrical hoist steam heated (steam generator not included) Nsdjymxgnspfx Ahwscn temperature distribution in 2 zones dimensions (l x w x h) : ± 5.000 x 1.550 x 2.200 mm adjustable speed

Condition: used, belt width 400 mm all stainless steel adjustable speed with lower and upper belt Nedpfx Ajymnnushwscn adjustable upper belt with outfeed belt with air knife dimensions (l x w x h) : ± 2.500 x 900 x 1.400 mm mobile 4,45 kW

Condition: used, loading : max. 2.800 kg (depending on the product) all stainless steel vacuum pump not included suitable for cooling PLC control adjustable speed Njdpfx Ahoymnnnowscn tilting system to discharge 1 water filter dimensions (l x w x h) : ± 3.490 x 1.820 x 2.250 mm power: 5,9 kW

Condition: used, continuous blanching / pasteurizing / cooking vessel or cooling plant shaftless spiral : perforated drum with welded screw (helix configuration) by which the products are gently transported through the water complete insulated closed system : energy saving by the insulation of the entire machine and the indirect steam heating net length ± 11 m width 3.100 mm all stainless steel adjustable speed variable dwell adjustment Ncodpfx Aeymnnhjhwsn suitable for steam heated • connection 400 kg / h (5 bar) heat exchanger circulation pump with outfeed conveyor belt for unloading with elevating spiral screw for loading in good condition Applications : • Blanching of vegetables and potato products • Pasteurising and/or after-pasteurising of vacuum-packed products • Cooking of sausages in natural or artificial casings • Cooking of heads and tongues • Cooking of poultry • Continuous soup production

Condition: used, can be used as crumber or pre-duster (only dry coatings) Nodpfxsymnnbe Ahwecn ideal for irregular shapes all stainless steel adjustable speed mobile outfeed conveyor belt width 400 mm outside dimensions (l x w x h) : ± 3.000 x 1.600 x 1.900 mm

Condition: ready for operation (used), A cooled table-top meat grinder Mado is available. Cutting set diameter: 82mm, Cutting set version: 3-piece Unger system, Motor power: 1.45kW, Motor speed: 2700rpm, Auger speed: approx. 210rpm, Throughput capacity: approx. 400kg/h, Tray volume: 6l, Machine dimensions X/Y/Z: approx. 550mm/550mm/500mm, Weight: approx. 90kg. An on-site inspection is possible. Ncedpjymfcvofx Ahwsn

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: S18092, The DMK 20 C Table Cutter is the ideal table cutter for small to medium-sized meat processing businesses, premium gastronomy, as well as large-scale kitchens and catering operations, thanks to its compact, robust, and precise design. The well-thought-out construction provides the user with almost unlimited versatility in all application areas. The machine is equipped with two independently operable, powerful motors, offering a wide range of control options. The optionally available robust, mobile base frame ensures the desired mobility. The machine recently underwent a major inspection at the manufacturer DMS in Saarbrücken. The net weight of 260 kg speaks for itself – a true professional-grade machine! The machine is available from week 8. You will receive an invoice with VAT shown separately. Our used equipment service for you: • 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs • High-quality branded equipment at fair prices • Professional refurbishment / inspection & expert cleaning • Tested & fully operational - or your money back • Flexible shipping or self-collection options • Competent advice – before and after purchase • Provision of user manuals, wiring diagrams & spare parts • DGUV V3 inspection Machine specifications: • Completely stainless steel • Solid cast stainless steel bowl (bowl capacity 20L) • High-precision, maintenance-free cutting unit • Stainless steel knife head with 6 knives • Tight cutting clearance in the bowl radius • High stability • Extremely low-vibration operation • Vibration-damping machine feet • Plexiglas cutter cover Nodpfx Aoymd Sishwscn • Analog, easy-to-read thermometer • 6 stainless steel knives, 7 stainless steel distance rings, two bowls Drive & control: • Separate knife shaft drive with electromagnetic brake • Brake release function via push button for cleaning purposes when the lid is open • Separate bowl drive with directly mounted, maintenance-free gearbox • Two speeds can be controlled independently • Large, easy-to-use push buttons with hygienic protective covers Safety features: • Overflow protection in accordance with UVV • Ingress protection in accordance with UVV • Noise reduction cover • Electromagnetic brake • Emergency stop function • Machine meets HACCP requirements • Machine complies with UVV • BG certified Technical data: • Bowl volume: 20L • Usable fine emulsion capacity: approx. 16kg • Number of knives: 6 • Speed: 1500/3000 rpm • Knife shaft power: 3.3/4.5 kW • Mains voltage: 400 V • Control voltage: 24 V • Circuit breaker: 16A (slow-blow) • Dimensions (W x D x H): 83cm x 80cm x 115cm with mobile base • Weight: 260 kg • Serial number: S18092 • Year of manufacture: 2020 • Type: DMK 20 C Condition: Used, major inspection carried out, fully functional Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement

Condition: excellent (used), Year of construction: 2002, Type: MLF400 Serial number: 2190 Year of construction: 2002 Belt width: 400 mm Capacity: max 50 strokes/min Hopper: 270 litres Power: 3 x 380V, 50Hz, 7.86kW Dimensions: 3000 x 1000 x 2600 mm Ncsdpfx Asymdfvjhwjn Weight: 1186 kg Including BDG400 bridge breaker and extra long outfeed conveyor of 900 mm

Condition: excellent (used), Year of construction: 2013, Type: OptiFlour 600 II Serial number: 2215 Year of construction: 2013 Belt width: 600 mm Power: 3 x 400V, 50Hz, 5.3kW Dimensions: 2750 x 1650 x 2300 mm Weight: 1025 kg GEA OptiAir cyclone Type: OPA Serial number: 515 Year of constuction: 2011 Power: 3 x 400V, 50Hz, 4kW Dimensions: 1350 x 950 x 1800 mm Weight: 450 kg Njdpjymbfajfx Ahwscn

Condition: used, Laser Sintering System Vanguard si2 SLS System, upgraded in 2017 to modern standards Machine Dimensions: Width: approx. 157 cm Depth: approx. 119 cm Height: approx. 198 cm Minimum installation space: 4.57 m × 3.66 m × 3.05 m Door height: 2.13 – 2.44 m Floor: Level (max. 25 mm deviation) 50 psf load capacity Non-vibrating Untiled / no carpet Approx. 1,150 kg Process station: 240 VAC ±5 % 3-phase 12.5 kVA Dedicated circuit 4-wire cable Ceiling connection For different voltages: Transformer required: 208→240 V 400→240 V 480→240 V Upgrade Details: UniHeat V5 / 10-zone build chamber heating Layer thickness adjustable via software, all listed materials are parameterized at 0.10mm 70-watt CO2 laser Fully digital, 3-axis high-speed scanning system with "XStream BDS" scanner control system with scan speeds of 6–12 m/s Build rate at medium packing density: 10–15 mm/h 2 x 20kg powder reservoirs integrated in the machine Including unpacking container and manual unpacking station (see pictures in the attachment) Njdjyl Tv Ispfx Ahwecn Including machine and software documentation in digital form Last maintenance August 2024 (Laser window + ATC sensor new in 2024) Including 2 x nitrogen generators and 1 x cooler included Operating hours: unknown / average use 2x per week The following materials are qualified for a 0.10mm layer thickness: - PA12 - PA2200 / EOS - TPU - natural / Stratasys - PP - natural / Lehmann & Voss - PA12 - PA2210FR / EOS - PA11 - black / AM Polymers (Support is secured despite the closure of LSS, as the service technicians have been taken over by a Belgian company) Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and error!) For further questions, please feel free to contact us by phone.