Arosa

Condition: good (used), Schaublin 102 N, machine number BL 329218, year of manufacture approx. 1998, center height 102 mm, center distance 375 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, spindle speed up to 2,800 rpm, tailstock, accessories, Nwjdpfx Ahoy Hip Io Njf

Condition: good (used), Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Threading range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, Njdpfxey Hin Rj Ah Nowf max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: good (used), functionality: fully functional, Technical data: Centre height 110 mm Centre width 160 mm Spindle bore 23 mm Motor power 1.7 kW Speed can be set via potentiometer from approx. 100 - 2,300 rpm 3 pre-selected speeds or 3 switching levels . Scope of delivery, machine with: Operating modes: Manual + automatic Pneumatic clamping device Tilt tailstock with 2 sleeves for K 12 collets, with control switch for switching Hand lever cross support with 4 stops, consisting of cross and longitudinal support Njdpfxjy Egmho Ah Njwf .

Condition: excellent (used), Year of construction: 1987, Schaublin 125 C precision lathe Year: 1987 Nodpfxjy Avyxj Ah Nowf Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg Accessories/options: tool holders Röhm chuck 125mm documentations

Condition: used, Year of construction: 2017, INDEX - C200 - 2017 - system Sinumerik 840D SolutionLine - spindle bore 65 mm - cooling through cooling water - working hours between photos Njdpfeyzkp Eex Ah Newf - used condition as shown on photos - under power, can be tested

Condition: used, functionality: fully functional, We are selling our Feinbau lathes due to relocation. There are three different machines available. The machines can be inspected and collected on site at our location in Königsbach-Stein. Nedpfx Ahoyzfcao Newf

Condition: good (used), functionality: fully functional, Center height 110 mm Nwsdpfoywtd Dex Ah Nef Center width 160 mm Spindle bore 23 mm 3 speeds for clockwise rotation and 3 speeds for anti-clockwise rotation

Condition: like new (used), functionality: fully functional, Very nice Schaublin 102VM from a government instrument workshop. Equipped with HEIGHT SUPPORT and both traveling and fixed steadies. Unique machine with Sony readout. Nwodpfsywk Ugjx Ah Nef

Condition: good (used), functionality: fully functional, Type PM1-F-Z, data: Nwsdpeymy Duofx Ah Nof Center height: 110 mm Center distance: 160 mm Spindle bore: 23 mm 3 right-hand speeds and 3 left-hand speeds approx. 670 / 1140 / 2840 rpm

Condition: good (used), Well-running Schaublin with attachments as per pictures with Nwodpjymmn Hefx Ah Nof many shots

Condition: used, Year of construction: 2022, INDEX - C200 - 2022 Nedpoyl Nnasfx Ah Newf - less used condition as shown on photos - under power, can be tested

Condition: good (used), Year of construction: 1982, functionality: fully functional, Precision high-speed lathe make FEINBAU Machine No. 4891 Type PM1-FZB Year of manufacture 1982 Technical data : . Maximum turning length 90 mm Swing diameter over bed 220 mm Nodpfoyfib Tjx Ah Njwf Swing diameter over support 110 mm Center distance 160 mm Bore 23 mm Drive motor 0.65 / 1 / 1.3 kW Space requirement , length x width 1.6 x 0.8 x 1.2 m Scope of delivery : Collet chuck device for collets : K23 DIN 6341 Collets Hand lever cross support with adjustable stops Hand lever boring vise, with 2 x MK1 holders and stops . .. Ongoing purchase of used German machines without NC or CNC control .

Condition: excellent (used), functionality: fully functional, center height: 150 mm, center width: 630 mm, spindle bore: 40 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 14 rpm, overall weight: 1,500 kg, Equipment: rotational speed infinitely variable, Schaublin 150A Lathe Specification Manufacturer: Schaublin Model: 150 Year: unknown Control: conventional Max. turning diameter: 340 mm Distance between centers: 630 mm Main spindle Speed: 14 to 3000 rpm Spindle mount: Camlock D1-4" Collet mount: Schaublin B32 Extras Multifix B plus 5 tool holders 3- and 4-jaw chuck Tailstock Nedjx Ddamspfx Ah Nswf Collet set B32 Coolant system Heidenhain DRO (ND780, 3 axes) Machine lamp Reduction gearbox Quick-clamping device Etc.

Condition: new, Year of construction: 2025, functionality: fully functional, center height: 180 mm, turning diameter over cross slide: 212 mm, spindle bore: 52 mm, turning length: 1,000 mm, quill stroke: 152 mm, quill diameter: 52 mm, turning diameter: 360 mm, spindle nose: ASA D1-6, spindle speed (max.): 2,500 rpm, spindle speed (min.): 20 rpm, overall weight: 1,470 kg, Equipment: rotational speed infinitely variable, The SUN MASTER RML-1440V is a high-speed precision universal engine lathe designed for accurate turning, threading and general metalworking. It features a rigid cast-iron bed, hardened and ground ways, a powerful variable-speed spindle with two-range gear head (20–400 / 400–2500 RPM), and a D1-6 spindle nose. The lathe includes a full quick-change gearbox, power feeds for both carriage and cross-slide, a 4-way tool post, tailstock with MT4 quill, foot brake, constant-surface-speed (CSS) function, coolant system and an integrated lubrication system. The RML-1440V provides stable performance, precise control, and versatility for both production and workshop applications. The lathe is locate in our warehouse and ready for shipment and any time. Nwsdpfx Ahoxyh Nqj Nof

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Nwsdpfxexxm Hfo Ah Nof Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Production time: 26,500 With MBL Bar Feed

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm Nwodpfxoxdmgve Ah Nef CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw Nwjdpfx Aew N Rh Aoh Nof - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Nwjdpfew Iq Umox Ah Nof Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: >> Machine No. 283152 >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 Nwjdjwvq Tmspfx Ah Njf >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.

Condition: excellent (used), The used SCHAUBLIN 102N bench lathe is a small-sized Swiss precision manual lathe, 102mm center height, 400mm center distance, 20mm spindle hole. Nwsdswqxcxspfx Ah Njf 2 similar machines available (one with short bed and quick tooling and the other with long bed and gear head); already complete with electrical panel and safety devices; equipment and conditions as per photo.

Condition: excellent (used), The used SCHAUBLIN 120 VM precision parallel lathe is a medium/small sized Swiss manual lathe, 120mm center height, 600mm center distance, 25mm spindle hole. Njdewqxcfjpfx Ah Nowf Complete machine with feeds and various equipment, already complete with electrical panel and safety devices; equipment and conditions as per photo.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, center height: 150 mm, center width: 630 mm, spindle bore: 40 mm, turning diameter: 340 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, overall weight: 1,450 kg, Schaublin 150A Draai bank Specificatie Manufacturer Schaublin Type 150 Year of manufacture 1997 Besturing conv. Max draaidiam. 340mm Distance between centers 630 mm Hoofdspil Toerental 55 tot 3000 omw/min Opname Camlock D1-4" Spantangopname Schaublin B32 Extras Multifix B plus 7pcs reedschaphouders 3 and 4 klauw Tegencenter Spantang set Koelmiddel inst. Heidenhain DRO (2-aces) Machine lamp Conusliniaal Fast chip installation Nwodpfx Ajwgd R Hsh Nof Vaste en meelopende bril Enz.

Condition: used, CNC lathe KUMMER K250 LSK Nwjdowdafuspfx Ah Nsf

Condition: used, TECHNICAL DETAILS - Number of axes : 2 Nodpfx Aowdafboh Newf MAIN SPINDLE - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - Max. turning diameter : 60 x 60 [mm] UPPER RIGHT TURRET - X/Z stroke : 300 x 285 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 10 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1400 x 1575 [mm] - Machine height : 1670 [mm] - Machine weight : 1650 [kg] MACHINE HOURS - Number of hours under power : 68992 [h] - Number of working hours : 15107 [h] EQUIPMENT - CNC : Fanuc 0i-TD - Coolant tank - Parts catcher - Loading cell - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - Max. turning diameter : 50 x 40 [mm] UPPER RIGHT TURRET - X/Z stroke : 220 x 220 [mm] - Rapid traverse rate : 15 [m/min] POWER SUPPLY - Supply voltage : 200 [V] Nwjdewdad Ropfx Ah Nof - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1880 x 1390 [mm] - Machine height : 1600 [mm] - Machine weight : 1600 [kg] MACHINE HOURS - Number of working hours : 18941 [h] EQUIPMENT - CNC : Fanuc 21i-TD - Coolant tank - Parts catcher - Loading cell - Electric transformer