K.S.GmbH

Condition: used, Year of construction: 2009, functionality: fully functional, cutting width (max.): 297 mm, cutting length (max.): 420 mm, working width: 2,680 mm, input voltage: 400 V, input frequency: 50 Hz, BIELOMATIK A3 / A4 CUT-SIZE PAPER SHEETING & AUTOMATIC REAM WRAPPING LINE High-capacity, fully automated A3 and A4 copy paper sheeting and packaging line manufactured by Bielomatik (Commissioned in 2009). Engineerd for high-precision cutting, hole punching, and continuous ream packaging for office and printer paper production. TECHNICAL SPECIFICATIONS & FEATURES: Ksdsz An Tuopfx Amvonb - Manufacturer: Bielomatik - Year of Commissioning: 2009 - Machine Layout / Pocket Configuration: 2x4-Pocket (Dual-stream 4-pocket layout) - Max. Operating Speed: Up to 500 m/min - Packaging Capacity: 32 Reams / minute - Suitable Paper GSM Range: 75 - 90 g/m² - Paper Formats: A4 / A3 cut-size - Inline Hole Punching Unit: Included / Operational - Packaging Unit: Integrated automatic ream wrapping & film packaging system with customer-brand labeling options. CONDITION & INSPECTION: The machine is fully operational and maintained in excellent working condition. Available for on-site inspection. Technical datasheets, operational videos, and additional high-resolution images can be provided via email or WhatsApp upon request.

Year of construction: 2010, condition: ready for operation (used), Side table with air Knjdpfxez Aah Rs Amvjb Chrome table Data numeric control is installed 2008 from Perfecta and completely overhauled Available immediately 3 knives

Year of construction: 2013, condition: used, 1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equipped with 15inch touchscreen, USB and Ethernet interface as well as direct processing of prepress data on the machine control without additional hardware, CIP 3 ready, CIP 4 optional. Including spare parts package with wear parts. External compressed air connection with 6bar required. The system is in very good condition. Sale preferably as a complete system. Documentation available. An on-site inspection is possible by appointment. Kjdpszz Iq Rofx Amvjnb

Year of construction: 1999, condition: used, functionality: fully functional, We are offering this used CMC Cevenini ET7 roll slitting machine, manufactured in 1999, for sale. The machine has been fitted with a new control system and is in good used condition. Only the compressed air hoses should be replaced when the opportunity arises. The machine is currently out of operation and is being sold due to a new acquisition and space constraints. It is ideal for beginners who are looking for a reliable machine in the adhesive tape or film segment. It is also excellent as a core cutting machine. Kedpezzq E Rofx Amvenb The price is negotiable. We welcome suggestions. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2004, PERFECTA TRIMM STAR 110; Year of manufacture: 2004; Counter reading: 3 million; Productivity: 15 – 110 cycles/min, infinitely variable; Maximum format (trimmed): 300 x 440 mm; Minimum format (trimmed): 85 x 115 mm; Maximum format (untrimmed): 320 x 460 mm; Minimum format (untrimmed): 100 x 125 mm; Knodpfxozzavls Amvjb Height of insert/cut stock: 70 mm; Height of single sheet: 6 mm.

Year of construction: 2017, condition: used, functionality: unexamined, Leased vehicle returned Approximate transport dimensions: 50x175x96 cm, approx. 30 kg Knsdpfx Aezwck Domvsb Serial number: 41049060917 Stock ID: 13500329

Year of construction: 2020, operating hours: 414 h, condition: used, functionality: fully functional, machine/vehicle number: C-322-K7-13853, We offer this used MultiCam Celero 7 Flatbed cutter / CNC Router, year of construction 2020. Serial Number: C-322-K7-13853 Year of Manufacture: 2020 year Voltage: 380 V Phases: 3 Ph Knjdpfxozvvc De Amvsb Current: 58.2 A Power: 38.3 kW Frequency: 50/60 Hz Comes with HF Spindle, Two Knife modules, ATC, Depth Adjustment Sensor, Laser Pointer If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2007, condition: used, An ARISTO flatbed cutting and routing system with MultiHead IV, HF Routing Device, color camera and ARISTOprojection is offered. Cutting width: 2300mm, static repeatability: +/-0.08mm, max. material clearance thickness: 55mm, drive system: digital AC servo motors, data format: HPGL compatible, interface: RS232C/V.24, transmission speed: 38400baud, vacuum system: adjustable matrix vacuum zones. 2) MultiHead IV type 4021/OT.M.P. IV-1, electrically oscillating tool axis, max. pressure: 180N at 6bar, integrated laser pointer, color camera with AutomaticEye registration system, tool head dimensions W/H/D: 166mm/390mm/330mm, weight: approx. 8.5kg. 3) HF Routing Device for spindles 4040 DC/4040 DC-S, max. speed: 50000rpm/60000rpm, power: max. 800W/1000W, Z-axis stroke: 50mm, collet range: 1.5mm-6.35mm. 4) ARISTOprojection for 1:1 projection of the contours onto the working area. Machine was regularly maintained. Documentation available. Inspection possible by arrangement. Knjdpszuzz Nsfx Amvsb

Year of construction: 2019, condition: used, total length: 2,600 mm, total width: 2,800 mm, total height: 1,600 mm, cutting width (max.): 1,800 mm, The FQJ-1800 honeycomb panel cutting machine (year of manufacture 2019) is an efficient, used machine, ideal for precise cutting of panels with widths ranging from 125 mm to 1800 mm and thicknesses of 10–80 mm. Equipped with three blades, it allows for adjustable cutting speeds in the range of 0–50 m/min, enabling the machine to be adapted to individual production needs. The motor has a power of 4 kW (380V, 50Hz), ensuring reliable and high performance even under intensive use. The machine comes from the renowned manufacturer San(qingdao) Machinery Co., which guarantees a robust construction and durability. This is an excellent option for companies looking for professional solutions in the field of honeycomb panel cutting. Ksdpfozuxmijx Amvsnb

Condition: excellent (used), functionality: fully functional, overall weight: 400 kg, We sell directly. Make-Ready Table for Bobst 106 E/ER Kodpfxozuwazj Amvenb We offer a professional table for the pre-preparation and alignment of die-cutting tools, as well as a cleaning section located outside the die-cutting machine. This device reduces the machine setup time (make-ready) of the Bobst machine by up to 30-40%. Technical data and specifications: Compatibility: BOBST 106 E /ER (SP / Novacut / Visioncut / SPeria series) Working format: Max. sheet format 1060 x 760 mm. Basing system: Fully compatible with the Centerline II system (fast and precise tool centering) Construction: Stable, steel frame with an ergonomic work surface and shelves for accessories/frames Included equipment: Basing strips and millimeter scales Clamping system Additional elements - additional frames (without the tools visible in the pictures, i.e., pins and telescopes) Technical condition: Condition: Excellent, 100% technically sound, locking mechanisms operate smoothly. Location of the device: Dąbrówka / Poznań, Poland Logistics and delivery Delivery terms: EXW (self-collection by the Buyer) / Possibility of arranging transport at the Buyer's expense. Availability: Immediate (the table is secured and ready for loading).

Condition: used, Year of construction: 2006, functionality: fully functional, Film cutting machine, robust model FSM L15 Year of manufacture: 2006 Knodszudzfepfx Amveb Location: Bad Tölz Inspection is welcome. We have other used machines available. Please feel free to contact us.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Knsdpfxozt Nbzj Amvsb Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Year of construction: 2017, condition: ready for operation (used), Offered for sale is an MR Wickeltechnik core cutting machine. Max. uncut core length: 2000mm, min./max. core inner diameter: 76.2mm/152.4mm, max. core outer diameter: 210mm, core wall thickness range: 3mm-18mm, automatic cutting width range: 8mm-600mm, manual cutting width: 2930mm, cutting tolerance: +/-0.2mm, max. core speed: 427rpm, max. feed speed: 200mm/s, cutting capacity: 18cuts/min at 76mm core inner diameter, 7mm wall thickness and 50mm cutting length, control: Siemens Simatic. Machine weight: 700kg. Equipped with fully automatic cutting cycle, manual core feeding, automatic core length detection by means of a photoelectric sensor. Documentation available. An on-site inspection is possible. Kedpfoztzq Isx Amvsnb

Condition: good (used), Year of construction: 1984, machine/vehicle number: 5441269, Size: 137 cm, Monitor included, Integrated hydraulic lift, No side table. Knsdpfsztcwvjx Amvsb

Condition: used, Year of construction: 1986, machine/vehicle number: 5611595, Size: 92 cm, Monitor. Ksdpfx Asztaq Hemvonb

Year of construction: 1999, condition: excellent (used), functionality: fully functional, machine/vehicle number: M16155, Plotter/cutter for creating packaging designs, complete with server and CAD software (ARTIOSCAD). Knsdpfxezkbado Amvsb Working area: 1300 x 1600 mm.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 617 138 66, input voltage: 380 V, type of input current: three-phase, total length: 5,000 mm, total width: 3,100 mm, total height: 2,000 mm, Rotary slitter for converting rolls into sheets Cardboard and corrugated paper Kjdpjzi S Agefx Amvenb Slitting width from 700 to 1500 mm Maximum roll diameter: 1500 mm

Year of construction: 2018, condition: ready for operation (used), An automatic slitter-rewinder Jurmet is available. Total operating distance: approx. 8900km, max. working width: 1600mm, min. parent roll width: 300mm, max. parent roll diameter: 1000mm, parent roll core inside diameter: 76mm/152mm, finished roll core inside diameter: 25.4mm/76mm, max. mechanical speed: 500m/min, max. web tension: 153N, knife positioning accuracy: +/-0.3mm, pressure roller width: 1600mm, max. product weight: 150g/m², max. product thickness: 220µm, operating hours: approx. 9850h. Documentation available. An on-site inspection is possible. Knjdpfozhnupsx Amvsb

Year of construction: 1995, condition: used, Prefeeder Automatic Fossaluzza complete with shuttle and loading roller conveyor Martin vacuum feeder + belts N 3 bottom printing units vacuum + belts Die-cutting unit Knjdpfxjzd Dyms Amvsb Vacuum stacker with bundle output 1 Tenace braker, year 2011 Martin ball turntable 1 Martin braker Bundle flip flop Palletizer Martin with sheet interlayer sheet feeder and pallet inserter

Year of construction: 2020, condition: used, functionality: fully functional, Nine locking frames for a Bobst 162 CER, available at a bargain price. Knodoy U Ituopfx Amveb

Year of construction: 2022, condition: ready for operation (used), There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible. Knjdpfxoy Tx R Ie Amvsb

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this like-new LIYU IECHO TK4s cutting plotter / CNC milling machine, manufactured in 2022. Manufacturer: LIYU IECHO Model: TK4s Year of Manufacture: 2022 Condition: Like new Machine Type: Cutting Plotter / CNC Milling Machine PLATINUM Q-CUT 3532 flatbed cutter with camera + 1.8 kW milling module Includes software, monitor, and PC. Used very little and in excellent condition. Working area of 3500 x 3200 mm Equipped with an automatic camera positioning system (CCD), regional vacuum system, AKI system for precise knife depth adjustment, and 2 motors on the X-axis for high accuracy and clean cutting results. Material thickness up to 45 mm Max. cutting speed 1500 mm/s Cutting accuracy ± 0.1 mm Formats: PLT, DXF, HPGL, PDF, EPS Vacuum pump: 7.5 kW 6-zone control system Two cutting heads, safety device, automatic tool adjustment Tools / Applications Kiss-cut, UCT, EOT, EOT3, PRT, DRT, V-CUT, CTT, 1.8 kW router, punching tool. Suitable for cardboard, DiBond, Forex, MDF, wood, acrylic, Plexiglas, vinyl, and many other materials. Cutting area: 3500 mm x 3200 mm Tools: Electric oscillating tool, tangent knife, creasing tool, kiss-cut tool, powerful rotary tool Camera System AKI System Cutting accuracy: 0.1 mm Power supply: 220 V 50 Hz / 380 V 50 Hz Automatic camera positioning system Kedsy Tk R Hjpfx Amvjnb Disassembly, reassembly, and transport costs are additional. A quote for disassembly, reassembly, and training is available from the manufacturer! If the distance is considerable, an inspection can also be carried out via live video. All information is provided without guarantee. Subject to change, errors and omissions. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 325, overall weight: 350 kg, fuel type: electric, color: white, total length: 4,000 mm, total width: 1,000 mm, total height: 1,550 mm, PSA HSA2500 semi-automatic sleeve cutting system for cardboard sleeves Features: Manual sleeve loading Automatic clamping Automatic feed Automatic length measurement Automatic cutting process PLC control with display Storage of up to 50 different sleeve lengths and 3 quantity settings Suitable for: Paper sleeves and plastic sleeves with a diameter of 50 to 200 mm Knjdoy Nyb Tjpfx Amvsb Maximum sleeve length: 2500 mm The system is equipped with a 76 mm spindle.

Year of construction: 1995, condition: ready for operation (used), working width: 1,550 mm, inner diameter: 152 mm, rotational speed (distance/time): 13,000 mm/min, The machine cuts from roll to DIN A4 or A3 size sheets, stacking 100 sheets per box, as required in the office supplies market. The machine's output at 7-up across the 210 mm width is: in 1 hour: 250 A4 boxes filled with 100 sheets each. Possible materials: photo papers, inkjet films, OHP transparencies, self-printable business card cartons, PVC sheets for bookbinders as covers for brochures, matt-coated laser films for labeling, felts, and much more! Knjdpfx Amey Ed Hfoveb The machine is still in daily operation, and can therefore be inspected and tested. We would handle dismantling, packing, and loading onto truck or into sea container at our cost... EXW.

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, working width: 1,450 mm, mount diameter: 800 mm, number of feed rollers: 2, section length (max.): 1,560 mm, The machine is equipped with 2 unwinding stations, allowing you to process double the quantity of cut lengths simultaneously. The machine speed is 50 m per minute. In the longitudinal direction, 3 knives can be set, enabling the width to be halved and a trim to be cut off on each side. The unwinding station is equipped with 3-inch and 6-inch pneumatic expanding shafts. We have successfully processed BO PET films with thicknesses ranging from 36 to 250 microns. The machine is fully connected, can be inspected daily, and, by arrangement, customer material can also be tested. We would disassemble and load the machine, either onto a truck or into a container. Kjdpfxsy D Edco Amvonb