Teknidan A/S

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve Njdpfx Ahjy E Nznj Nocr

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Swing over bed mm 500 Ncedpoy Eyz Ssfx Ah Nsr Swing over cross slide mm 270 Distance between centres mm 1000 Spindle mm 50,8 Main motor output kW Machine dimensions: length mm 2575 width mm 1100 height mm Machine weight kg 1615 - 1715 - 1815

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details turning diameter over bed 570 mm turning diameter over slide rest 365 mm turning length 3000 mm weight of the machine ca. 5 t dimensions of the machine ca. 5,5 x 1,44 x 1,38 m Additional information Well-maintained lathe from the maintenance department. Working range: Swing diameter over bed 570 mm Swing diameter over cross slide 365 mm Swing diameter in bed recess 600 mm Length of bed recess in front of main spindle 160 mm Turning length 3000 mm Center height over flat surface 280 mm Bed width 360 mm Maximum workpiece weight without steady rest 500 kg Maximum workpiece weight with steady rest 630 kg Main spindle speeds 11.2 - 2240 rpm Drive power 15 kW Feeds 60 longitudinal feeds/revolution 0.063 - 56 mm 60 cross feeds/revolution 0.0315 - 28 mm Tapping Nodpfsy Ed T Sox Ah Njcr 60 thread pitches 0.25 - 224 mm 60 thread counts 112 - 0.125 TPI Travels Cross slide 345 mm Top slide 125 mm Tailstock quill 190 mm Main spindle Spindle head DIN 55022 size 8 Camlock spindle head size 8 Spindle bore diameter 62 mm Spindle bore diameter at front bearing 100 mm Tailstock Quad diameter 80 mm Equipment and accessories: 3-axis digital readout 3-jaw chuck 4-jaw chuck RÖHM, 500 mm diameter mm Boring rod holder Center points Multifix tool holder with tool holders Steady rest Machine documentation

Condition: ready for operation (used), Year of construction: 1971, functionality: fully functional, We are selling our VDF Boehringer M 670 machine Nodpfx Asy Ecdpjh Nscr

Condition: refurbished (used), functionality: fully functional, CAZENEUVE Lathe HB 500 x 1500 Brand: CAZENEUVE Model: HB500 Distance between centers: 1,500 mm Nedpfxsy D Hv Ts Ah Njcr Center height: 200 mm Max turning diameter over bed: 500 mm Max turning diameter over cross slide: 448 mm Max turning diameter over carriage: 220 mm Spindle bore: 40.5 mm Tailstock taper: MT5 Max cross slide travel: 280 mm Number of spindle speeds: 18 Power: 10 HP Spindle speed: from 40 to 3,200 rpm Dimensions (L x W x H): 2,905 x 1,175 x 1,295 mm Weight: 1,950 kg

Condition: reconditioned (used), functionality: fully functional, CAZENEUVE HB 725 x 5000 Lathe Distance between centers: 5000 mm Center height: 315 mm Maximum turning diameter over bed: 725 mm Ncedjy Dpvcopfx Ah Nor Maximum turning diameter over saddle: 670 mm Maximum turning diameter over cross-slide: 400 mm Spindle bore: 81 mm Tailstock taper: MT6 Max. cross slide travel: 400 mm Number of spindle speeds: 18 Power: 18 HP Dimensions (L x W x H): 6640 x 1270 x 1355 mm Weight: 4,500 kg Fixed steady rest

Condition: used, TECHNICAL DETAILS - Distance between centers : 1800 [mm] - Max. diameter on bench : 583 [mm] - Machining diameter between centers : 280 [mm] - X/Z stroke : 255 / 1710 [mm] - Quill diameter : 100 [mm] - Quill stroke : 295 [mm] MAIN SPINDLE - Spindle nose : A1-8" - Spindle passage : 80 [mm] - Spindle speeds : 0 - 2500 [rpm] - Spindle power : 18.4 [kW] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.700 [mm] - Machine height : 1.820 [mm] - Machine weight : 2.700 [kg] EQUIPMENT - CN Conversational CAZENEUVE NUM Power - LCD control screen Njdpfxjy A Tkns Ah Njcr - Multifix Quick-Change Turret - Coolant tank - Chuck 3 jaws - Tool holder set

Condition: used, functionality: fully functional, spindle bore: 65 mm, turning diameter over bed slide: 520 mm, Lead and feed screw lathe Manufacturer: Heidenreich & Harbeck, Model: VDF Technical data Brand: Heidenreich & Harbeck Model: VDF Year of manufacture: unknown Control: conventional Centre distance: 1,500 mm Swing over bed: 520 mm Njdpfx Aey A H Akeh Nocr Spindle bore: 65 mm Dimensions: L 3.60 x W 1.20 x H 1.50 m Machine weight: approx. 4 t Equipment - 2-axis digital readout - 1,500 mm scale not included All data without guarantee. A powered demonstration can be arranged at any time in our exhibition hall.

Condition: excellent (used), TOS SN500 SA, 1500 mm, Digital, Tooling Ncedpfx Ahjy Auydj Njr

Condition: used, spindle bore: 51 mm, swing diameter over cross slide: 300 mm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 300 mm, Used lathe Brand: Amutio Cazeneuve Model: HB 575 Distance between centers: 1,000 mm Swing over bed: 575 mm Swing over carriage: 525 mm Ncedpfx Asyzrhceh Njr Swing over cross slide: 300 mm Spindle bore: 51 mm Speeds: 32–2500 rpm Power: 10 kW Bed width: 400 mm Includes: - 300 mm chuck with several sets of jaws - Closed steady rest - Quick-change tool post with 3 tool holders - Aurki digital readout (2 axes) - 2 live centers - Tray with coolant system

Condition: like new (used), Year of construction: 2017, functionality: fully functional, spindle bore: 105 mm, turning diameter: 500 mm, turning diameter over top slide: 300 mm, center height: 250 mm, turning length: 1,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, overall weight: 2,800 kg, Very neat and hardly used centre lathe including: digital readout, coolant system, fixed steady, travelling steady, quick-change tool post type Multifix C, 3-jaw chuck, independent 4-jaw chuck, faceplate, spindle sleeve and various centres. Nsdpfxjyzb Ixj Ah Nscr

Condition: used, Year of construction: 1974, functionality: fully functional, Lead and feed screw lathe Make: Heidenreich & Harbeck Model M530K Year: 1974 Ncsdpfx Aeyyk Rash Nsr Technical Data Manufacturer: Heidenreich & Harbeck Model: M530K Year of manufacture: 1974 Control: Conventional Centre distance: 2000 mm Swing over bed: 530 mm Swing over cross slide: 280 mm Spindle bore: 70 mm Spindle speed: 9 - 1800 rpm Dimensions (L x W x H): 4.05 x 1.50 x 1.40 m Machine weight: approx. 4 t Equipment - Röhm 3-jaw chuck, D 250 mm - 1 fixed steady rest - Removable gap bed over 400 mm length - 2-axis digital readout - 1 drill chuck - Coolant pump All data subject to change without notice. A powered demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1981, spindle bore: 51 mm, turning diameter: 575 mm, turning length: 1,500 mm, spindle speed (max.): 2,000 rpm, overall weight: 2,000 kg, 2-axis Newall DRO Capacity: 1500 x 575 mm Ncedeyxfk Sjpfx Ah Nor Spindle bore: 51 mm Maximum spindle speed: 2000 rpm Weight: 2000 kg

Condition: good (used), Stock number: 2954 Manufacturer: Knuth Year of manufacture: 1990 Type / Model: Torro 250/1500 Serial number: Control: conventional Center distance: 1,500 mm Spindle bore: 60 mm Center height: 250 mm Swing diameter over bed: 500 mm In gap: 700 mm Over cross slide: 300 mm Nsdpfx Ajywf S Hjh Necr Speed range: 11.5 to 1,600 rpm Drive power: 7.5 kW Accessories/Equipment: thread cutting device Condition: good Weight: approx. 2.5 t Dimensions: 3,200 x 1,100 x 1,350 mm

Condition: refurbished (used), Year of construction: 1984, The lathe is in perfect condition. It has undergone a complete geometric overhaul. The bed has been reground and all guides have been hand-finished (scraped). The headstock and apron have been completely disassembled, cleaned, and rebuilt. All parts have been stripped and freshly powder-coated. A measurement protocol is included. Machine weight is 4000 kg. The original documentation together with extensive accessories will be supplied. One pallet with approximately 13 Multifix C tool holders with turning tools is available and included in the listing! Nodpeyutlusfx Ah Nocr

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 105 mm, turning diameter: 560 mm, turning length: 1,500 mm, total length: 2,840 mm, total width: 1,150 mm, total height: 1,460 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, bed width: 350 mm, overall weight: 3,200 kg, Technical data Swing over bed: 560 mm Swing over cross slide: 355 mm Swing in gap: 785 mm Turning length in gap: 170 mm Distance between centers: 1500 mm Bed: induction hardened Bed width: 350 mm Chuck diameter: 315 mm Spindle bore: 105 mm Spindle nose: D1-8 Spindle taper: MT7 Spindle speed range: 25 – 1500 rpm Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.073 – 2.048 mm/rev Cross feed range: 0.020 – 0.573 mm/rev Metric threads: 0.2 – 14 mm Inch threads: 2 – 112 T.P.I. Module threads: 0.1 – 7 M.P. Diametral pitch threads: 4 – 112 D.P. Njdpfeytpy Sjx Ah Nscr Rapid feed: longitudinal 4.2 m/min cross 1.9 m/min Tailstock quill diameter: 75 mm Tailstock quill travel: 180 mm Tailstock taper: MT5 Main motor power: 7.5 kW Coolant pump power: 0.1 kW Dimensions (L × W × H): 2840 × 1150 × 1460 mm Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 21 mm, turning diameter: 210 mm, total length: 1,200 mm, total width: 500 mm, total height: 550 mm, spindle speed (max.): 1,710 rpm, spindle speed (min.): 140 rpm, overall weight: 120 kg, spindle motor power: 550 W, UNIVERSAL LATHE TYTAN 520 210 × 520 mm Njdpfx Aeyrrzcjh Njcr The Tytan 520 is a very reliable lathe designed in a simple and logical way. It is suitable for home workshops, educational workshops, and industrial use. THE LATHE DOES NOT INCLUDE A STAND THE LATHE IS IN STOCK AND AVAILABLE FOR IMMEDIATE SHIPPING Technical Specifications Turning diameter: 210 mm Distance between centers: 520 mm Spindle speed: 140 – 1710 rpm Number of speed ranges: 6 Spindle taper: MT3 Spindle bore: 21 mm Tailstock taper: MT2 Tailstock quill travel: 65 mm Longitudinal feed: 0.04 – 0.2 mm/rev Metric thread pitch: 0.4 – 3 mm/rev Inch thread pitch: (16) 8 – 48 TPI Motor power: 0.55 kW / 230 V Weight: 120 kg Machine dimensions (L × W × H): 1200 × 500 × 550 mm Standard Equipment 3-jaw chuck – 125 mm Drill chuck Chuck guard Tool post guard Set of cutting tools Arbor Delivery to the customer is possible. Shipping costs are calculated individually by the transport company.

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 50390 € 952.37 € 500 mm 1500 mm 250 mm 75 mm 0 mm 400 mm 8 80 M 3 25-100; 100-400; 500-2000 U/Min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm 60-1/4 Gänge/" 240-1 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW Nsdpfx Ahjyq Srfj Nscr 3100 mm 1250 mm 1400 mm 2800 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 49 250,00 turning length2.000 mm € 52 100,00 turning length3.000 mm € 57 090,00 turning length4.000 mm € 62 740,00 turning length5.000 mm € 78 160,00

Condition: used, Year of construction: 1990, turning diameter over bed 0520 mm turning diameter over slide rest 300 mm turning length 1625 mm spindle bore 68 mm spindle turning speed range 23- 1250 U/min total power requirement 7,5 kW weight of the machine ca. 3 t dimensions of the machine ca. 2,8 x 1 x 1,4 m With Multifix holder, chuck und chuck safety cover. Ncjdsyn R Exopfx Ah Nsr

Condition: ready for operation (used), EXCELLO DLZ 500 LZ - 3 Meter Turning Length / Lead and Feed Screw Lathe - Centre height: 250 mm - Centre distance: 3000 mm - Swing diameter over bed: 500 mm - Swing diameter over cross-slide: 310 mm - Spindle bore: 65 mm - Spindle speeds: 28 - 1400 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric etc. - 3-jaw chuck 250 mm - 4-jaw chuck 250 mm - Multifix toolholder with inserts - Steady rest - Tool cabinet Ncjdpfx Ahjyntkqe Nsr - Documentation Dimensions (LxWxH): 5.5x1.4x1.6 meters / Weight: 3800 kg Subject to errors and input mistakes

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 100 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 400 mm, turning length: 2,000 mm, quill travel distance: 230 mm, total length: 3,600 mm, total width: 1,250 mm, total height: 1,400 mm, spindle speed (max.): 1,400 rpm, metric thread steps: 120, overall weight: 3,100 kg, three-jaw chuck diameter: 315 mm, Used traditional parallel lathe Sibimex CU500MT in excellent condition, ideal for mechanical workshops, industrial maintenance, metal fabrication, and precision machining. Solid, reliable machine, always carefully maintained. Sturdy cast iron frame, smooth slides, and precise mechanics. Perfect for those looking for a ready-to-use solution without investing in a new machine. Key features: * Excellent overall condition * Precise and reliable mechanics * Ready for immediate use * Ideal for machining shafts, flanges, bushings, and single parts * Perfect for small to medium production or maintenance Ncjdpfsym Ut Dex Ah Nor Machine is operational and can be inspected by appointment. No urgent work required. Testing on site available.

Condition: excellent (used), turning diameter over bed 900 mm turning diameter over slide rest 600 mm turning length 3000 mm Ncodpfxsym D H Te Ah Nor spindle turning speed range 11,2 - 560 U/min tool holder Multifix D1 total power requirement 22 kW weight of the machine ca. 5,6 t dimensions of the machine ca. 5,6 x 1,8 x 1,7 m Safety-related conversion according to CE standard 2017 2011 new plan pull spindle, lock case partially renewed, lubrication according to internal plan

Condition: ready for operation (used), Tos SN 55 B Conventional Lathe with Digital Readout and Safeties Swing diameter over bed: 540 mm Swing diameter over support: 300 mm Spindle bore: 75 mm Turning length: 1600 mm Dimensions: 360x150x180 cm (LxWxH) With feed on X and Z axis With steady rests With extra jaws With safety features With removable carriage section Ncedsylpqhjpfx Ah Nor With coolant pump With Mitutoyo digital readout 380v Location: Budel, Netherlands Transport: negotiable upon request Call or email for more information. Also check out our other listings. We are looking for industrial machines throughout the year. Do you have machines available? Send us photos and information. The seller is not liable for any typographical or data transmission errors. The machine's appearance, technique, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT (unless otherwise stated).

Condition: good (used), Stock number: 3081 Manufacturer: Matra Year of manufacture: Ncodpfxoykt Syo Ah Njr Type / Model: MD26 S Machine number: 3105-R Control: conventional Centre distance: 1,500 mm Spindle bore: 65 mm Centre height: 260 mm Swing diameter over bed: 520 mm over slide: 300 mm in gap: 640 mm Speed range: 20 to 2,000 rpm Feed longitudinal: 0.05 to 1 mm/rev cross: 0.03 to 0.63 mm/rev Connection: 5.5 / 7.5 kW Accessories/Equipment: 3-jaw chuck, Multifix toolholder, digital readout Condition: good Weight: 3 t Dimensions: 3,000 x 1,300 x 1,600 mm

Condition: excellent (used), Year of construction: 1979, turning diameter over bed 480 mm turning diameter over slide rest 295 mm Nedpfxjyiu T Aj Ah Nscr turning length 1000 mm spindle bore 56 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1,4 x 0,8 x 1,6 m