Concrete cutter

WaKra PSM 5

Condition: new, Year of construction: 2023, description Sanding machine with brush-tools or pneumatic air-drum for almost all workpieces (straight, curved, swung profiles etc.). * solid wood sanding * finishing sanding * for brush and polish finish * shaft ∅ 30 mm * allows to use different abrasive * optional with variable speed control K7ootnnod motor power: 2,2 kW r.p.m.: 1000/1500 or 1500/3000 shaft- ∅: 30 mm max. abrasive- ∅: 350 mm max. abrasive width: 275 mm required place: 1500 x 800 mm weight: ab 180 kg

carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 210 cm, axle spacing: 1,000 mm, total height: 320 cm, load capacity per stand: 2,500 kg, Condition: new, Year of construction: 2023, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 shelf uprights height 3.2 m with base section 1.8 m usable depth (2 m total depth) Bigu3x3fmku 12 cantilever arms with 1.8 m usable depth (for chipboard with a depth of approx. 2.1 m) Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) Net price: € 2,490.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Shelf height 3,200 mm - Load capacity per upright 2,500 kg - Foot section and cantilever arms with 1,800 mm usable depth - (For 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 screw-on cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal bracing for 1,000 mm spacing - Shelf length = 2,100 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can be made in approx. 1 week after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2014, 5 tons load capacity, turning, lifting / lowering, longitudinal axis automatic for components of any length, extremely robust 3 axis turning device incl. clamping device, height adjustable, longitudinal axis adjustable, speed infinitely variable - turning device 1: 1600 x 1700 x 2380mm - turning device 2: 2100 x 1700 x 2380mm - Control cabinet - control panel turning speed: 100-2000 mm/min table load: 5000 t Connection voltage: 230 V / Hz load capacity: 5000 kg stroke in height: 800 mm face plate diameter: 1600 mm Clamping diameter: 1400 mm center height: 1400 mm New price of this machine is close to 100.000.-€ Ckjcp27eyz

Condition: excellent (used), CATALOG NO. 7199 TECHNICAL DATA - loading hopper inlet 990x800mm - outlet for chipped wood, diameter 150 mm - rotor working width 800mm - main engine 15kW - pump motor 0.75kW - number of knives 18 pcs - knife dimensions 30x30mm - 15x12mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2230x1430x1640mm - weight 1250 kg Bicypk8ntcw ADVANTAGES – German production – O&M documentation – pressure drawer – autoreverse – used chipper, very good condition Net price: PLN 56900 Net price: EUR 12932 depending on the price of EUR 4.4 (Prices may vary with higher fluctuations)

Condition: new, Vertical stainless steel storage tank, diameter 2,5 m height 6m with 4 legs Cfmak9mhl0

Condition: used, In this offer you purchase a used 5-colour production system "Ricoh Pro C7100SX" Object of sale: 1 x Ricoh Pro C7100SX with the following equipment: incl. 5th colour in white incl. Fiery E-43A (PRO80-32) incl. Finisher SR5050 incl. Vacuum Feed LCIT RT5100 Bh9e2als9jc Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 2,568,633 pages Colour: Approx. 1,165,619 pages Black: Approx. 1,403,014 pages Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: good (used), Year of construction: 2018, machine/vehicle number: 172822052, Specification Trunnion table size 600mm diameter X axis traverse 600mm 7cbarcec Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation Maximum table load 360 degree 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor Maximum spindle torque Spindle motor 22.4kW 239Nm at 1100rpm 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis Rapid feed rate A axis 540 degrees a second (90 rpm) 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg Machine equipped with:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf conveyor Laser tool setting Traori-this function keeps the tool in an optimized cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed guarding

Condition: as good as new (ex-display), Year of construction: 2019, Operating hours: 5,000 h, It is a Fanuc Häberle RobodrillPlus-Big-K - Häberle Feinmechanik CNC-Technik GmbH ADV machine with 200 mm column elevation more travel of the Z-axis 5-axis rotary table Häberle DTTiB 240 tools BT30 135 Workpieces Ø 250 mm up to 25 kg FANUC M20 robot for tool and workpiece handling Spindle: 24,000 rpm Zero point clamping system Renishaw measuring probe Knoll coolant system for IKZ 60bar Travel X700 x Y400 x Z400 mm rapid traverse 54m/min New price 450.000€ Bhott77ar8t Häberle RobodrillPlus-Big-K - Häberle Feinmechanik CNC-Technik GmbH

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Isszwki

Condition: excellent (used), Catalog number 6275 TECHNICAL DATA - shaft width 510mm Pm9b7 - length of the tops 2540mm - cast iron tops - both adjustable tops - original cast iron adjustable guide - shaft cover - 2.85kW engine - diameter of the 130mm extraction stub - dimensions length / width / height 2540x900x1000mm - weight 807 kg ADVANTAGES - German production - shaft cover - planer used, very good condition Net price: PLN 6900 Net price: EUR 1533 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)

Condition: used, Year of construction: 1997, x-travel 800 mm y-travel 600 mm z-travel 500 mm CNC-control TNC 430 HEIDENHAIN Table dimensions 540 x 540 x Ø 630 mm max. table load 300 kg spindle taper SK 40 spindle turning speed range 15.000 U/min drive capacity - spindle motor 10,5 kW feed range 30.000 mm/min rapid traverse 30 m/min tool change unit 30 Pos. coolant voltage 400 V total power requirement 31,0 kVA weight of the machine ca. 8,0 t dimensions of the machine ca. 2,85 x 3,45 x 2,70 m Xvuslxlh - Serial-No.: 11875 - Machine ON: - Programm ON: - control: TNC 430 HEIDENHAIN - electrical hand wheel - coolant equipment

Condition: good (used), In this offer you acquire a used colour production system "Xerox 1000 Colour Press". Item for sale: 1 x Xerox 1000 Colour Press with the following equipment: incl. Fiery EX1000 (QX100-07) incl. Paperdeck JCF-1 incl. Stacker LCS-1 incl. A-GW01 incl. 5th colour Meter readings: Total: Approx. 11,193,774 pages Colour: Approx. 8,933,137 pages Black: Approx. 2,260,637 pages Condition: This is a used machine and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The machine has been tested for function A test printout can be seen in the photo Packing and shipping: Zswivbtc You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Condition: good (used), CHP Plant Combined heat and power plant consisting of 3 steam boilers Commissioning in 2008/2009 Bfsbv2vj28e Expansion with 3rd Boiler in 2010 All three boilers are identical Each Boiler 13 to Steam/h~ 12.5 MWh BWL fuel heat output 26 bar operating pressure / 32 bar safety valve 480°C Turbine MAN Exhaust pressure 0,8-1,4 bara Heat extraction flow at heating condenser 90-105°C 4,93 MW (electric) at 90°C flow rate Generator: 6,3kV

Condition: new, Year of construction: 2023, Power generator 60KVA Iveco Stage-V Model: FPT F34TEVP01 Stage-V Engine manufacturer: Iveco Stand-by power: 62.5KVA Prime Power: 60kVA Voltage: 230/400 Frequency 50 Hz synchronous generator voltage regulation via AVR Cylinder: 4 Amps: 215.3 Induction systems: Turbocharged Water cooled Speed: 1500 rpm Fuel type: diesel Zf9kjl9o Starting system 12 V Diesel tank: 140l Soundproof housing Sound pressure: 70db 3m. Alternator: Stamford S1L2-Y Protection class: IP23 Cooling water preheating Fuel consumption: 75% power 9.75 L/h Dimensions: LxWxH: 2850x1000x1420mm Weight: 1520kg. Aggregate control: ComAp AMF 25 with the operating modes MAN/Auto, Display to show: Voltage, current, frequency, speed, battery voltage and operating hours including battery charger 12 V 2.5 A Sockets + terminal strip 6x sockets 230V incl. FI/LS B16A/30mA 2 x CEE 400 V 63A, 5-pin 2 x CEE 400 V 32A, 5-pin 1 x CEE 400 V 16A 5-pin ATS Transfer Panel Output Protection Circuit Breaker Incl. 4p MCCB Connection for grounding Incl. grounding with grounding rod with 10m connecting cable Chassis EURO: Chassis with overrun brake: Incl. assembly of generator Model: EGR 2000FT Vehicle technology: AL-KO Germany Technical data: Max. loading: 2000 kg Payload: 1615 kg *Overall measurements Length: 4676mm Width: 1820mm Height: 1140mm Curb weight: 385 kg Axles: 2 Wheel type: 185/R14 C 5x104N Max.load ball: 100kg Useful length: 2900mm *AL-KO fixed coupling: Press on coupling device: max.100kg *Braking system Eye coupling AL-KO Tire pressure: 4.5 bar Max. speed: 80 km/h *Suspension type Independent with elastic rubber elements. Mechanical inertia with autoreverse AL-KO Lighting and signaling system in accordance with EC/UN regulations Production time currently: 60 days after ordering

Condition: used, Three jaw Chuck (223/5) Diameter 190 mm Height 130 mm 7wgmgmz03

Condition: excellent (used), Catalog number 6728 TECHNICAL DATA - max cutting height 120mm - max width of the element 700mm - working width of the shaft with saws 640mm Cesx82q8hl - max saw diameter 400mm - disc bore diameter 90mm in advance: - pawls - 2 pulling shafts, toothed from down: - 2 smooth pulling shafts - shaft with saws - pulling shaft, smooth - rollers leading out, sliding, metal 12 pcs - 3 types of feed speed - 4,4kW feed motor - 30kW engine - machine dimensions, length / width / height 3200x1420x1350mm - weight about 3000 kg * The MAR-MASZ company vouches for the quality of your purchase, but is not an authorized representative of the manufacturer. We use all trademarks and names for informational purposes only, enabling the identification of the goods. We only resell the goods that the manufacturer has previously placed on the market. We have no business relationship with the manufacturer. ADVANTAGES - Polish production - solid construction - used machine, very good condition Net price: PLN 44900 Net price: EUR 9978 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)

Condition: good (used), - Offer number: 5/119 - Two-coordinate measuring instrument measuring microscope measuring technique - Manufacturer: Carl Zeiss Jena - Type: ZKM01-250D - with separate power supply ( see photos on the pallet ) - with altogether 5 digital displays measuring value displays 4 pcs Heidenhain VRZ 181 - with 1 pcs Renishaw P14 Probe Interface measuring device - with 1 monitor 1 computer 1 keyboard and 1 printer ( old ) - with all connection cables - Dimensions : with feet H x W x D 1830x940x860 mm - weight : total with accessories 520 Kg - optical condition according to photos - Attention during the disassembly of the measuring device a transport damage occurred, 2 cables were damaged (see photo with finger) - The device comes from a company insolvency and was in use until the end .Due to the transport damage we could not test the device . Ux9yr889 - Used Notes: The goods offered here usually comes from company liquidations and insolvencies. Due to missing nameplates it is not always possible to give exact item data. The item pictures are original photos that show the actual item condition. If several identical items are offered, only one of the items is photographed. There may be slight variations in the item condition of the individual item. Should an item be opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement.

Condition: good (used), In this offer you acquire a used colour production system "Xerox 1000 Colour Press". Item for sale: 1 x Xerox 1000 Colour Press with the following equipment: incl. Fiery EX1000 (QX100-07) incl. Finisher A-GW01 + LCS-1 incl. Paperdeck JCF-1 incl. 5 colour transparent Meter readings: Total: Approx. 3,661,919 pages Colour: Approx. 2,892,248 pages Cp0vnvfpvr Black: Approx. 769,671 pages Condition: This is a used machine and may show signs of use (minor scratches or yellowing). The machine has been tested for function A test printout can be seen in the photo Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Condition: excellent (used), Year of construction: 2006, Vibrating screening machine IFE 2000 x 5000 - 1 Sieve width 2 m Sieve length 5 0 Dln007 Single deck Steel sieves Machine has very few operating hours. Cross beams and side walls without any wear.

Condition: good (used), The scope of delivery includes: 01x U-approach corner, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 50 x 50 mm profile dim. outside: U: approx. 40 x 40 mm material thickness: approx. 5,00 mm base plate dim.: approx. 300 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 06 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Hbh2cs97nv General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, Circle cutter MK 5 2zqyff from 50 - 200 mm in diameter

Condition: excellent (used), Year of construction: 1999, We offer you a heating system company URBAS heating system with a heating capacity 5 MW TYPE UR-FRR-5000 Heating for biomass, bark, wood chips, sawdust, humidity up to 60%. year 1999 Complete furnace with electrostatic precipitator Fuel supply system Furnace with movable floor, dimensions 7 x 4 m Gw7zgo3 Chimney Complete control system Pumps, valves Disassembled, ready for loading

Condition: used, Year of construction: 1980, Floor saw, diesel floor saw, asphalt cutter Qktgfvo7x -Saw blades: 2 -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E start -stepless feed

Condition: good (used), In this offer you acquire a used 5-colour production system "Xerox 1000 Colour Press". Item for sale: 1 x Xerox 1000 Colour Press with the following equipment: incl. 5th colour (gold/silver) incl. Paperdeck JCF-1 incl. booklet finisher LFN-7 incl. stacker incl. FreeFlow print server, license expired Meter readings: Total: Approx. 18,613,184 pages Colour: Approx. 16,590,986 pages Black: Approx. 2,022,198 pages Condition: Q38ox This is a used machine and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The machine has been tested for function A test printout can be seen in the photo Please note the FreeFlow licence agreements Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Before shipment or collection, a function test will be recorded for you on video. For more information, you can of course also contact us personally.

Condition: as good as new (ex-display), Year of construction: 2022, Universal balancing machine with several application principles: _____ Bo3b77lmly (1) Horizontal with roller bearings and V-drive e.g. for motor anchors, (2) Vertical operation with precision spindle system e.g. for fan wheels, (3) Complete balancing system e.g. for motors or motor spindles. _____ More refurbished balancing machines will be shown one after the other. _____ Remarks: (a) Used balancing machine - sample machine - like new (b) Modernization of older balancing machines & measuring electronics (c) Contract balancing - advice and service for balancing machines (d) Design and manufacture of a calibration and test rotor (e) Integration in automated balancing systems possible (f) Technical balancing advice and concept development (g) Balancing center and contract balancing

Condition: new, For sale 6x spare filters for tool and mold making HUBER CHEMO-FILTER EM1204K/5 Djqxw2 incl. shipping costs (original packed)

Condition: good (used), Trapezoidal taps Diameter 40 mm Pitch 1/5 inch Bcsfb7pb30

Condition: used, Year of construction: 2000, Punching machine Noble Daoc8qt HM 35/350 BKE 200/5 Maximum pressure 35 T 5 mm sheet thickness at 40 kp/mm²

Condition: like new (used), Year of construction: 2014, 5 tons load capacity, turning, lifting / lowering, longitudinal axis automatic for components of any length, extremely robust Synchronized height adjustment with hydraulic clamping system one turntable with forward and backward feed 3 axis turning device incl. clamping device, height adjustable, longitudinal axis adjustable, speed infinitely variable - turning device 1: 1600 x 1700 x 2380mm - turning device 2: 2100 x 1700 x 2380mm - Control cabinet - control panel turning speed: 100-2000 mm/min table load: 5000 t Connection voltage: 230 V / Hz load capacity: 5000 kg stroke in height: 800 mm Iwzymh0yo face plate diameter: 1600 mm Clamping diameter: 1400 mm center height: 1400 mm with technical documentation, electrical diagram etc.

Condition: good (used), For sale is the following item: - Our offer number: 5/122 - 685 Dosimat + Stirrer 728 + Exchange Unit 20 ml - Manufacturer: Metrohm - Serial number: 63026220 + 16850010 - Dimensions : WxHxD 260 x 43 x 270 - weight : 6 Kg - optical condition according to photos - used - functional Chnmivj3tf In another listing of ours you can also find from Methrom 736 GP Titrino + Stirrer 728 +Exchange Unit 20 ml as a set Notes: The goods offered here usually come from company liquidations and insolvencies. Due to missing nameplates it is not always possible to give exact item data. The item pictures are original photos that show the actual item condition. If several identical items are offered, only one of the items is photographed. There may be slight variations in the item condition of the individual item. Should an item be opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively for the identification and description of the existing goods.

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm Bczb3yig - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: good (used), The scope of delivery includes: Cgvk7r8n7v 01x U-approach corner, used material color: red total height: approx. 400 mm total width: approx. 148 mm inside width: approx. 138 mm total depth: approx. 350 mm Inside depth: approx. 225 mm Material thickness: approx. 5.00 mm Drill hole diameter: approx. 13/ 15 mm Number/ drill holes: 05 pcs.

Condition: new, Year of construction: 2022, Equipment: PACE control, ECO mode, HardHat hood made of PE, Xc2003 control system Qzfqx Minimum temperature: -10 °C Dimensions base frame: 4844 x 1807 x 1892 mm (L x W x H) Unload speed: 1500 rpm Rated speed at full load: 1960 rpm Ambient temperature: 45 °C Motor power: 104 kW Flow rate (FAD): 10.9-9.7 m³/min Operating pressure range: 5-14 bar Compressor control flexible pressure and flow control: PACE Engine make / model: John Deere / 4045HI551 Compressed air treatment consisting of: Compressed air aftercooler, water separator and PD filter. Emission level: Stage V Number of cylinders: 4

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery 01x U-approach corner, used Ca9qp0tgwi material color: yellow total height: approx. 355 mm total width: approx. 305 mm inside width: approx. 150 mm total depth: approx. 230 mm material thickness: approx. 5 mm Number/ drill holes: 04 pcs. Hole Ø: approx. 17 mm General information about the article: This item is offered for pickup only. A beyond that desired transport or shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 05x stacking boxes, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue Dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the Jxqrjm requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 02x swivel castors, new Gz7t0gp2s 02x brake / swivel castors, new 01x angle set, new for mounting the worktop 04x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Crxb0ilg Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 02x swivel castors, new 02x brake/steering rollers, new 01x angle set, new for mounting the worktop 08x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm Gz7k3dhcu dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 01x Angle set, new for fixing the worktop 08x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 B7mdbpctjd Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 01x angle set, new for fixing the worktop 04x safety hook, new Material color: compl. galvanized

Condition: good (used), Year of construction: 2019, Functionality: fully functional, TECHNICAL DETAILS Lifting torque: 315 t*m Working pressure: 295 bar Rotation angle: Endless / Continuous Boom reach: 9605 mm Further details: see PDF Smbtc8fk MACHINE DETAILS Mobile dimensions: 2,415.15 x 11,481 x 3,180 mm footprint: 9,032.98 x 8,925 mm

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 3810 mm Measurements depth 1590 mm Measurements height 1525 mm Machine weight 1910 kg Main Drive Number of spindles 5 Spindle speed range 6000 Media Main electronic connection 400 V / 50 Hz Power consumption 24 kW Vwwxd9z General Data Measurements width 3810 mm Measurements depth 1590 mm Measurements height 1525 mm Machine weight 1910 kg Main Drive Number of spindles 5 Spindle speed range 6000 Media Main electronic connection 400 V / 50 Hz Power consumption 24 kW This HASKOVO 4PM-230/5 was manufactured in the year 2011 in Bulgaria. The machine has a spindle speed of 6000 rpm. Application Types Other

Condition: used, Year of construction: 2001, total power requirement:7 kW weight of the machine ca.:1,2 t long shafts gear test center WZ 200/1900 O3D Class Zeiss Hofler (Klingelnberg) Cguokngq

Condition: used, Year of construction: 2016, CONTROLS .. CNC controls HEIDENHAIN TNC 640 WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 640 mm .. Y-axis travel: 250 mm .. Z-axis travel: 400 mm .. rotating range B-axis from: 105 ° .. rotating range B-axis up to: -105 ° .. rotating range C-axis from: 0 ° .. rotating range C-axis up to: 360 ° .. distance spindle nose - table surface (max.): 450 mm TABLE .. workpiece load (max): 60 kg SPINDLE / HEAD .. spindle revolutions (max): 42000 /min TOOL MAGAZINE .. number of positions: 90 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V Bgduzi832mo .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2400 mm .. space requirements -front/back-: 2370 mm .. total height: 3000 mm ATTACHMENTS .. band filtration unit: yes .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes Machine equipment: - Accuracy package - Workpiece magazine for 36 ITS pallets 50/148 - Renishaw OMP 400 (measuring probe) table chuck PowerChuck P Ø150 Tool measurement BLUM Infrared probe Renishaw OMP400 Medium distributor MHT with 3 dosing settings Thermal package / Accuracy package Kinematic-Opt incl. calibration pallet ball 30mm Dynamic Collision Controller (DCM) Z-axis compensation Fault indicator exo-call Remote diagnostics exo-net 1 network connection Hand control bar HSCI FS Additional light for working area Pressure amplification for chuck

Condition: ready for operation (used), Technical characteristics pressure 2.2 kg / cm² 18 kW diathermic oil boiler timed pressing digital display C7xsm9nc3 Largeur plateau1300 mm Longueur plateau3000 mm Diamètres vérins70 mm Nombre de vérins6 Caractéristiques presseHeating plates Température maxi120 °C Power and Motors Voltage: 400 V Power: 20 Kw Overall dimensions Lenght: 3500 mm Width: 1500 mm Weight: 3200 Kg

mileage: 229,800 km, power: 130 kW (176.75 PS), year of first registration: 2,008, month of first registration: 11, overall weight: 7,490 kg, fuel type: diesel, color: grey, year of inspection (TÜV): 2,023, month of inspection (TÜV): 9, gearing type: mechanical, emission class: euro5, loading space width: 2,480 mm, loading space length: 6,050 mm, loading space height: 2,370 mm, Condition: used, machine/vehicle number: NEW-23, Equipment: ABS, Soot filter, Tail-lift,

Condition: used, Year of construction: 1988, High speed milling spindle HENNINGER Type 814 / 5131 / 1:5 / 15000 speed max. 15000 rpm at 70% ED transmission ratio 1:5 power transmission up to approx. 2,5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with tightening thread M16 collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12,5 / 13 / 14 mm Bm3jeme7x9 own weight 6,5 kg good condition

Condition: excellent (used), Veneer press type SPM-FLL80/5 Panel size 2500 x 1300 mm F8irdiho9 Table stroke via keyboard Press pressure 80 tons Safety rip cord

Condition: ready for operation (used), Year of construction: 1987, Available immediately from location : Hydraulic guillotine shears Lotze Type 2/3 4000 / 5 Year of construction 1987 Cutting length 4040 mm Material thickness 5 mm Stainless steel 3 mm Programmable backgauge ELGO over 1000 mm Drive 12 kw Center length limiter foot switch 1 set of spare blades Dm7bp2 Weight 7 to At a price of Euro 7,500 plus VAT ex location

mileage: 252,209 km, power: 132 kW (179.47 PS), year of first registration: 2,011, month of first registration: 11, overall weight: 7,490 kg, fuel type: diesel, color: red, gearing type: mechanical, emission class: euro5, loading space width: 2,310 mm, loading space length: 3,800 mm, loading space height: 400 mm, Condition: used, Year of construction: 2011, machine/vehicle number: 269/23, Equipment: ABS, Crane, Soot filter,

mileage: 252,209 km, power: 132 kW (179.47 PS), year of first registration: 2,011, month of first registration: 11, overall weight: 7,490 kg, fuel type: diesel, color: red, gearing type: mechanical, emission class: euro5, loading space width: 2,310 mm, loading space length: 3,800 mm, loading space height: 400 mm, Condition: used, Year of construction: 2011, machine/vehicle number: 269/23-N1, Equipment: ABS, Crane, Soot filter,