Diesel forklift

Still RX 70-50

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,040 h, load capacity: 5,000 kg, lifting height: 3,680 mm, fuel type: diesel, mast type: telescopic, construction height: 2,680 mm, fork carriage width: 1,300 mm, fork length: 2,100 mm, empty load weight: 7,243 kg, drive type: Diesel, Diesel forklift Nlsdpfxezmzt Aj Aphog Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 355/50-15 Rear tire type: Superelastic Rear tire size: 250-15 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing options are available upon request at favorable terms. We will be happy to provide you with competent and detailed advice on our vehicles. Side shifter, 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, full cabin, interior mirror, joystick, rotating beacon, windshield wiper, single-pedal control, LED, seat.

Condition: used, Year of construction: 2005, x-travel 600 mm y-travel 500 mm z-travel 600 mm control iTNC 530 Heidenhain table surface area 900 x 500 mm spindle turning speed - stepless 0-12.000 U/min spindle drive 10 kW tool taper SK40 DIN 69871 tool magazin: 24 total power requirement 22 kW weight of the machine ca. 6,4 t dimensions of the machine ca. 5,3 x 3,5 x 3,5 m Chip conveyor scraper belt Nsdpfx Apjvxwq Ejhjlg Coolant system 3 pumps / cartridge filter Grundfoss high-pressure pump type CRK2-220/22 A-W-A-AUUV

Condition: used, Year of construction: 2013, operating hours: 8,413 h, lifting height: 3,500 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-35 diesel forklift, year of manufacture: 2013, operating hours: only 8,413h! Previous owner: German Armed Forces. Rated lifting capacity: 3,500kg. Lifting height: 3,500mm. Duplex mast. Twin tyres on front axle. Fork length: 2,400mm. Hydraulic sideshift. Full cabin. Diesel engine: [30kW/41hp]. Weight: 5,034kg. Good condition! Immediately operational! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ...) will be happy to assist you. Further information available on our website. Subject to prior sale and errors excepted. Cabin Nljdpoz Dnbfjfx Apheg = Further information = Lifting capacity: 3,500kg Overall height: 250 cm For further details please contact Tobias Ebert.

Condition: used, Year of construction: 2014, operating hours: 1,986 h, lifting height: 3,500 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Cabin = More information = Nljdpfxoz Dm U Dj Aphsg Lifting capacity: 3,500 kg Please contact Tobias Ebert for further information.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: F26-00153, Year of construction: 1997, operating hours: 775 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fuel type: diesel, mast type: simplex, gearing type: automatic, tire condition: 85 %, overall weight: 8,430 kg, empty load weight: 4,930 kg, color: green, Equipment: cabin, head guard, lighting, I sell a forklift, - Mitsubihi FD35A Diesel year of manufacture 1996. - The state of the counter 775 hours. - Lifting capacity 3.5T. - Mast lifts 360cm Nledpfx Aeudlaasphsg - Unladen weight 4930kg. - Full lighting. - Forklift in very good condition.

Condition: used, Year of construction: 2013, operating hours: 9,214 h, lifting height: 3,500 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-35 diesel forklift, year of manufacture: 2013, operating hours: only 9,214h, previous owner: German Armed Forces, rated capacity: 3,500kg, lift height: 3,500mm, duplex mast, dual tires on front axle, fork length: 2,400mm, hydraulic sideshift, full cabin, diesel engine: [30kW/41hp], weight: 4,666kg, good condition, immediately ready for use! Leasing or financing offers available upon request. Mr. Mihm will be happy to assist you by phone. Further details can be found on our homepage. Errors and prior sale excepted. Nljdpfoz Dm Uwox Aphsg Cabin, rental possible = Further information = Load capacity: 3,500 kg Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2013, operating hours: 1,165 h, lifting height: 3,500 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-35 Diesel Forklift, Year of manufacture: 2013, Operating hours: only 1,165h! Previous owner: Bundeswehr (German Armed Forces), Rated lifting capacity: 3,500 kg, Lifting height: 3,500 mm, Duplex mast, hydraulic sideshift, rotator, 3rd hydraulic function, full cabin, diesel engine [30kW/41HP], fork length: 1,800 mm, weight: 4,921 kg, immediately available for operation! On request, we can provide you with a leasing or financing offer. Mr. Mihm (phone) will be happy to assist you. Further information available on our website. Subject to error and prior sale! Additional features: - Power steering - Cabin Nedpjz Dm Uqjfx Aphjlg = Further Information = Lifting capacity: 3,500 kg Overall height: 250 cm Contact Tobias Ebert for further information.

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP1000 Year of Manufacture: 2005 Reliable and efficient CNC vertical machining center designed for milling, drilling, and tapping a wide range of metal components. The Bridgeport XP series is renowned for its robust construction, high precision, and fast processing capabilities, making it ideal for both job shop and series production. Main technical specifications: (based on Hardinge Bridgeport XP1000 specification) Control: Heidenhain iTNC 530 Travel: X = 1020 mm / Y = 510 mm / Z = 635 mm Table size: 1200 × 520 mm Max. table load: 700 kg Spindle speed: up to 10,000 rpm Nlodpfx Apjxqpruehjg Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 15 kW Machine weight: approx. 7,000 kg Power supply: 400 V / 50 Hz Cooling system: integrated Application: The Hardinge Bridgeport XP1000 is designed for precision metalworking—milling, drilling, tapping, and contour machining. Ideally suited for: - Tool, mold, and component manufacturing - Automotive, equipment, and industrial sectors - Situations requiring accuracy, reliability, and consistent performance If you have any further questions, we will be happy to assist you.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 10,208 h, load capacity: 5,000 kg, lifting height: 2,780 mm, fuel type: gas, mast type: telescopic, construction height: 2,250 mm, motor manufacturer: VW, gearing type: other, fork length: 150,602,400 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 355/50-15, rear tire type: superelastic tires (black), rear tire size: 250-15, overall weight: 7,135 kg, total height: 2,250 mm, total length: 3,200 mm, total width: 1,550 mm, fuel: liquid petroleum gas (LPG), motor model: CHT, Equipment: sideshift, STILL RX 70-50 T-600 /2018 – LPG forklifts TECHNICAL DATA Lifting capacity: 5.000 kg Lifting height: 2.780 mm Closed height: 2.250 mm Mast: Standard (2W278) Fork length: 150.602.400 mm Fork carriage: 3A Drive: 4-Zyl. Treibgas Engine: VW CHT Transmission: elektrisch Tyres: Superelastik SE 355/50-15 (80%) / 250-15 (60%) Nlsdpfx Ajz Ap S Sjphog Service weight: 7.135 kg Length: 3.200 mm Width: 1.550 mm Year of manufacture: 2018 Operating hours: 10.208 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift Rental truck – Rental price on request. Internal no.: 1201898 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 3,881 h, load capacity: 5,000 kg, lifting height: 4,630 mm, free lift: 1,590 mm, fuel type: diesel, mast type: triplex, construction height: 2,350 mm, drive type: Diesel, Diesel forklift Nedpozz D Hhsfx Apholg ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Description: Camera, Side shifter, 3rd valve, heater, full cabin, dual tires.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK40 - Spindle power : 32,5 [kW] - Spindle speeds : 40.000 [rpm] - Number of spindle hours : 1.211 [h] LINEAR AXES - Travels on X/Y/Z axes : 420 / 320 / 320 [mm] - Cutting feed rates (X/Y/Z) : 60.000 [mm/min] A ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] B ROTARY AXIS - Travel : 100 [°] (+/-) - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 Nlodpjuhbuujfx Aphjg - Tool exchange time : 5 [sec] TABLE - Table dimensions : Ø 250 [mm] - Maximum weight upon table : 20 [kg] - Distance table / spindle nose (min./max.) : 40 / 360 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 35 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.555 [mm] - Machine height : 2.520 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 4873 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel - Linear scales - 3 colors status lamp - Coolant tank * With washing gun - Chips conveyor - Oil mist extractor : FILTERMIST FX5002 - Spindle cooling unit - Electrical cabinet air conditioning - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool-holders : 60 - Tool preparation bench

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 9,270 h, load capacity: 5,000 kg, lifting height: 4,450 mm, fuel type: gas, mast type: duplex, gearing type: automatic, tire condition: 100 %, overall weight: 6,800 kg, total height: 3,050 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, cabin, lighting, sideshift, Still RX 70-50 forklift Load capacity: 5000 kg Year of manufacture: 2019 Fuel type: LPG Heated cabin Lifting height: 4450 m Mast type: Triplex, 3050 mm Side shift Fork length: 1200 mm New front and rear tires Hours: 9270 Forklift has undergone an oil service. UDT certified. Option to install a fork palletizer or a fork positioner. Warranty included. Njdpozzwuxofx Aphjlg

Condition: good (used), Year of construction: 2013, operating hours: 6,405 h, load capacity: 5,000 kg, lifting height: 5,080 mm, fuel type: diesel, mast type: triplex, construction height: 2,500 mm, empty load weight: 6,037 kg, mileage: 6,405 km, Triple diesel forklift Brand: Still (Germany) Year of manufacture: 2013 Nlsdpfx Ajzv D Dpephog In good condition! Capacity: 5,000 kg Lifting height: 5,080 mm Mast height lowered: 2,500 mm 6,405 hours on the meter Equipped with FREELIFT, sideshift, and fork spreader. Watch the video on YouTube.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, table length: 1,200 mm, table width: 600 mm, spindle speed (max.): 12,000 rpm, table height: 560 mm, table load: 900 kg, Machine with just revised spindle, never used after Nljdpfx Apjrb Amleheg Connected to power and available for inspections and tests Lubrication through spindle 30 Tools Heidenhain 530

Year of construction: 2013, operating hours: 3,707 h, condition: used, empty load weight: 7,331 kg, lifting height: 6,600 mm, free lift: 2,060 mm, mast type: triplex, construction height: 2,980 mm, fork length: 2,400 mm, fork carriage width: 1,400 mm, drive type: Diesel, load capacity: 5,000 kg, construction width: 1,510 mm, Diesel forklift Load center: 500 Fork width: 130 mm Fork thickness: 60 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Diesel-electric Condition: Ready for use and fully functional Technical condition: Good Front tires Type: Superelastic Front tires Size: 355/50-15 Front tires Condition: 40 - 60% Rear tires Type: Superelastic Rear tires Size: 250-15 Rear tires Condition: 60 - 80% Description: Full cab with heating, lighting similar to STVO, 3rd + 4th valve up to fork carriage, working lights front + rear, rotating beacon, 2x cross lever, single pedal Sideshift, Nlsdpfxjt Ilq Io Aphog 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, full free lift, interior mirror, exterior mirror, joystick, rotating beacon, windshield wiper, single pedal, LED, seat,