Excavator

SENNEBOGEN 730E M-HD

Condition: ready for operation (used), Planer (four-sided planer) Constant table Max. planing width: 605 mm Planing height 2-sided: 200 mm Planing height 4-sided: 200 mm Bodpfx Aajwg S Tvoqewh Feed rate: 7 - 9 - 11.5 - 14.0 - 18.0 - 23.0 m/min OPTION: Feed speed up to approx. 50 m/min Motors Bottom cutterhead: 7.5 kW Top cutterhead: 11.0 kW Right vertical spindle: 11.0 kW / D 40 mm Left vertical spindle: 11.0 kW / D 40 mm 5th horizontal spindle: 15.0 kW Feed: 2.4 / 3.0 kW Thicknessing: 1.1 kW Cutterheads with 6 knives For feed speeds up to 24 m/min, 3 knives are sufficient 3 knives operating, and 3 sharp knives are in reserve position Additional unit: 5th working shaft horizontal 15 kW Outfeed unit roller width: 350 mm Machine is sold in condition A, B or C: A) as is B) repaired C) repaired and with new electrics OPTION Pre-planer at the machine infeed with planing head width of 200 mm and 3.5 kW motor

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Bwjdpfxjncd Azj Aaqsh Feeding : by 2 gear motors, Make NORD GEAR

Year of construction: 2024, condition: new, - 4 separation steps - log length on request - log diameter on request - Discharge height on request Bsdpspfaubofx Aaqowh - 5,5 KW SEW gear motor - R127 SEW gearbox

Condition: excellent (used), power: 129 kW (175.39 HP), fuel type: diesel, color: blue, first registration: 06/2018, Year of construction: 2018, operating hours: 9,650 h, General information Model year: 2019 Registration number: TTZ-87-L Serial number: 340410/5372 Technical information Number of cylinders: 4 Drive: Wheel Bwsdpfx Aaexqrvpsqjh GVW: 30.300 kg Functional Mast length: 13,7 m CE mark: yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Other information Emissions class: Stage IV Additional information Please contact Ferdinand Pater for more information type. Fuchs MHL340 T4f Stock number D46 Serial number 340410/5372 New deliverd 2018 Working hours 9650 Weight 30.3 Engine Deutz 6.1 L6, 129Kw 2000Rpm Boom 13,7 meter boom configuration, Boom 7,2 and Stick 6,2 Safety check valves on boom and stick cylinders Cabin Cab system horizontally and vertically adjustable Upper carriage Standard Fuchs color, Central greasing system Under carriage All-wheel drive with differential, 2-speed powershift transmission, Stabilizer cylinders with integrated two- way check valves Lights Several (LED) lights on boom, stick and cabin Extra 13kW Generator, Rear view camera

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, planing width: 620 mm, planing height: 300 mm, working width: 600 mm, REX SUPERMASTER Year 2003 – SUMA-8/63.WW Machine Number: 22.500 Bwodpfx Aaox E Dv Tsqeh Year of Manufacture: 2003 General Data Machine type: Planing and profiling machine with chamfering units Total connected load: approx. 222.8 kW Feed speed: 10 – 100 m/min (adjustable, frequency-controlled) Heavy-duty outfeed unit (AZG): 4 rollers, pneumatic roller pressure, universal joint shafts Tools / Units • Planing spindles: Bottom planing spindle: 37 kW Top working spindle: 45 kW Right working spindle: 22 kW Left working spindle: 22 kW • Chamfering units: 4 × chamfering units (AFVo / AFVu, left/right, top/bottom) – each 1.85 kW Speed: approx. 5,600 rpm, height adjustable depending on chamfer width Total number of processing tools: 8 (4 planing/working spindles + 4 chamfering units) Drives Feed unit: approx. 32 kW • Auxiliary motors (individually): Height adjustment (thickness) Width adjustment Chip removal adjustment Machine adjustment Extraction system Individual extraction nozzles Ø 160–200 mm depending on unit Total required extraction capacity: approx. 25,350 m³/h Accessories Various planing heads and tools (see photographic documentation in the appendix) Switch cabinet included The SUPERMASTER series delivers optimal results in the production of high-quality dimensional timber such as structural solid wood (KVH), Duo/Trio beams or glulam. Additionally, machines of the SUPERMASTER series are also used in the production of cross laminated timber (CLT). Thanks to the powerful feed system, large, heavy, wet, frozen as well as small, fine workpieces are processed effortlessly by the SUPERMASTER.