Used Schaffer 2028 Slt for sale (147)

Year of construction: 2019, condition: used, functionality: unexamined, Complete Avalon Sciences Geochain seismic acquisition set, including approx. 30 GSR-1 MKII Slim Seismic Receiver Tools with digital modules, recorders, power panels and surface support hardware. Only used a few times, in very good condition. Technical specifications: Approx. 30 × GSR-1 MKII Slim Seismic Receiver Tools with AS251 digital modules Multiple Inter-tool cables (ITC-4-40M) Telemetry adapter, formatter units, gamma-ray tool and crossover/adaptors GSP digital recorders (8 analogue channels) GPP Geochain Power Panels GPS timestamp kits Rack-mounted PCs with hot-swap drives and NAS storage Network and power infrastructure (switches, monitors, cabling) Packed in plastic and alloy cases Total weight approx. 1,450 kg Details: Used only a few times Complete and operational system Location: Warehouse Haaksbergen Condition: Used Rodpew R Tq Asfx Af Tebw Documentation and packing lists available on request All information has been compiled with the utmost care, but no liability is accepted for possible errors or omissions.

Condition: new, Year of construction: 2023, operating hours: 4 h, functionality: fully functional, machine/vehicle number: N/A, overall weight: 6,000 kg, tank capacity: 2,000 l, power: 620 kW (842.96 HP), continuous power: 5,600,000 kW (7,613,872.00 HP), continuous power (apparent): 700,000 kVA, total length: 500 mm, total width: 180 mm, total height: 274 mm, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, noise level: 82 dB, rotational speed (min.): 1,500 rpm, type of input current: three-phase, warranty duration: 12 months, A new industrial diesel generator built into a sound and weather proofed canopy, constructed from galvanized steel and fitted with a residential exhaust muffler. Manufactured in the UK using UK and EU components, it has a bunded internal 2000ltr base fuel tank, a Scania DC16 078A-02-43 1500RPM water cooled diesel engine coupled to a European alternator and controlled by a Deep Sea Electronic Module. Rsdpfx Afordzg Hs Tebw The generator is supplied with a special catalyst (SCR) system to achieve Tier 5 emissions compliant with a 2500ltr Urea tank(ad-blue). This is new still in the box, the installation is included via the European manufacturer of the system. The 82db sound level is measured at a1m distance from the generator, see attached images of the generator when under load test and relevant brochures.

Condition: used, Year of construction: 2016, Used Filling Monoblock MITSUBISHI up to 39000 BPH It is extremely important to note that this machine is complementary to it’s rinsing machine: (click here). The Filling Monoblock Mitsubishi offers an advanced solution in the bottling sector. Specifically designed to handle a wide range of liquids, it boasts a capacity of up to 39,000 BPH. Technical Specifications of Model FHRJ80M Mitsubishi Heavy Industries Mechatronics Systems Ltd manufactured the FHRJ80M model in 2016 to meet the growing demands for speed and precision in bottling. Equipped with 80 valves, this weight-based filling system accurately doses products, significantly minimizing waste. Moreover, the system fills aluminum bottles in various sizes ranging from 0.29L to 0.41L. Thus, it showcases its versatility for handling different types of liquids such as coffee (last product that has been filled by this monoblock), liquid soap, oil, and spirits. Bottling and Capping Features Rodpevgvlkefx Af Tobw Furthermore, the Mitsubishi FHRJ80M monoblock integrates a capping function with 24 heads, accommodating aluminum screw caps of 28 mm and 38 mm. Its clockwise rotation direction eases integration into existing production lines. Additionally, the precision in cap placement and swift execution ensure the process’s efficiency, which is crucial for preserving product integrity and container safety during transport and storage. Storage and Maintenance Currently stored in a warehouse, the Filling Monoblock Mitsubishi remains in excellent condition to ensure its functionality and readiness. Also, the availability of instruction manuals aids in maintenance and repair operations, which are essential for extending the machine’s lifespan and maintaining optimal performance. Integrated safety features protect operators and the machinery, thereby reducing accident risks during operation. Conclusions of the Filling Monoblock Mitsubishi Finally, the used Mitsubishi FHRJ80M filling monoblock serves as an optimal solution for those seeking efficiency and reliability in the bottling industry. Its adaptability to various formats and product types, along with the precision of its filling and capping system, make it ideal for a broad range of industrial applications. With proper maintenance and careful management, this monoblock can deliver high performance, significantly enhancing production process optimization. This model not only meets but also exceeds industry expectations in terms of functionality and performance.

Condition: used, Year of construction: 2016, Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph It is extremely important to note that this machine is complementary to it’s filling monoblock: (click here). Introduction to the Used Rinsing Machine MITSUBISHI This rinsing machine serves as an advanced solution for the bottling industry. Specifically, Mitsubishi Heavy Industries Mechatronics Systems Ltd. manufactures this 2016 model RNR100H machine to ensure effective cleaning of aluminum bottles. Consequently, it addresses the critical need for efficient and reliable rinsing processes in high-demand production environments. Rbjdjvgvhxjpfx Af Tew Operational Capacity and Speed The RNR100H operates at an impressive capacity of 39,000 bottles per hour, making it ideal for high-speed production lines. Additionally, the machine handles aluminum bottles in various formats, including 0.29L, 0.3L, 0.31L, 0.4L, and 0.41L, thereby adapting to specific production needs. Moreover, the grippers rotate clockwise, which optimizes workflow and significantly enhances the rinsing process’s efficiency. As a result, manufacturers can achieve higher throughput without compromising on quality. Gripper System and Double Treatment Furthermore, the  Rinsing Machine MITSUBISHI  features 100 grippers, allowing it to treat numerous bottles simultaneously. This double treatment system involves two distinct phases: firstly, the machine uses water containing hypochlorous acid for effective disinfection. Subsequently, the second phase employs pure water to ensure the complete removal of chemical residues. Therefore, this dual-step approach guarantees thorough cleaning and minimizes the risk of contamination. Compatibility with Filling Machines A crucial technical aspect of the RNR100H lies in its compatibility with various filling machines. Specifically, the filling machines must have a corresponding height between 120 and 200 mm and a diameter between 50 and 80 mm. These parameters ensure optimal integration with existing production lines, thereby reducing adaptation times and enhancing operational continuity. Consequently, manufacturers can seamlessly incorporate the rinsing machine into their workflow without significant downtime. Mechanical Structure and Maintenance Moreover, the mechanical structure of the Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph guarantees durability and reliability. The machine’s components, made from high-quality materials, resist corrosion and wear, ensuring a long operational life even in intensive production environments. Additionally, the modular design facilitates preventive maintenance, allowing for the rapid replacement of worn parts. As a result, downtime is minimized, and maintenance costs are effectively controlled. Energy Efficiency Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph From an energy perspective, the RNR100H optimizes energy usage to reduce consumption without compromising performance.

Year of construction: 2006, condition: good (used), Cross belt grinding machine Ashton AIS / XDIA Model AIS/3350 / XDIA S/N XP 20100082 (from Glasmek AB Sweden renovated in 2010) Manufacture: Ashton Industrial Sales LTD / UK year of manufacture approx. 2000 Professional Heavy Duty Seaming /Arrissing Machine 2x Diamond belt cross belts High speed abrasive and diamond grinding belts 400 V , 50 Hz castor ball tables for easy movement of the glass sheets. Table dimensions: L x W X H = 3,85m x 1,20m x 0,9m Rbjdpoh E T N Eofx Af Tow Weight 600 Kg CE marked

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Rbodpsxm Uf Ssfx Af Tew Condition: • NEW, unused • Only storage marks present (see pictures) • No operating hours

Condition: new, Year of construction: 2024, That’s a double-productive CNC laser machine. There's no magic, just two laser heads. In addition, this laser engraver and cutter features a lighting table with a powerful chain that can hold workpieces weighing up to 80 kg. Two laser heads function simultaneously at a minimum distance of 130 mm apart. Each has its own 100-120W laser tube, making it possible to work at fast rates. Wattsan 1610 works with wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, stone, etc. Wattsan 1610 Duos LT characteristics Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 160 mm Rbsdoh Ucxdepfx Af Tsw Positioning precision: 0,03 mm Machine size: 1600 x 2200 x 670 mm + if it is on wheels 315 mm Packing size: 2300 x 1750 x 810 mm Weight: 457 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. WRITE OR CALL US! WE WILL SELECT THE MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, functionality: fully functional, 1290 is a professional laser cutter for serious manufacturing. It has two laser heads, which transform this CNC laser machine into a super-efficient monster that works 24/7. In addition, this laser engraver and cutter features a lighting table with a powerful chain that can hold workpieces weighing up to 80 kg. Rodpervimxjfx Af Tebw Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. Two laser heads function simultaneously at a minimum distance of 130 mm apart. And this model’s table has a lowering depth of 160 mm. You can give our managers a call for additional details! Wattsan 1290 Duos LT characteristics: Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 160 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1920 x 1630 x 820 mm Weight: 393 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 7,865 h, load capacity: 6,000 kg, lifting height: 6,570 mm, free lift: 2,240 mm, fuel type: gas, mast type: triplex, construction height: 3,630 mm, fork carriage width: 1,550 mm, fork length: 1,580 mm, empty load weight: 9,800 kg, total length: 4,160 mm, drive type: Treibgas, construction width: 2,500 mm, Four-way Side Loader Load Centre: 600 Fork Width: 200 mm Fork Thickness: 65 mm Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Very good Front Tyres Type: Superelastic Front Tyres Size: 355/65-15 Rear Tyres Type: Superelastic Rear Tyres Size: 27x10-12 Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders available in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Hire purchase and financing at attractive terms are always possible with us. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this C6000SL. Rodpjyvwc Ujfx Af Tebw P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We can also offer to display your vehicle for commission sale in our facilities. Fork positioner, heater, full cabin, full free lift,

Condition: used, Model CES-LT-LIN-9x0.66-PODB-SH suitable for nitrogen Rbjdpfx Afjypbg No Tew all stainless steel belt width ± 660 mm nett belt length 9.000 mm total length ± 10.500 mm dimensions (l x w x h) : ± 10.500 x 1.431 x 2.230 mm 12 kW product height: max. ± 120 mm

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,900 h, load capacity: 5,500 kg, lifting height: 4,800 mm, free lift: 1,500 mm, fuel type: gas, mast type: triplex, construction height: 2,450 mm, power: 63 kW (85.66 HP), fork length: 1,200 mm, drive type: Treibgas, LPG forklift Load centre: 500 Mast type: Triplex Rsdpfoyxh Uaex Af Tobw Transmission: Torque converter Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Superelastic Rear tyres type: Superelastic Description: Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, load protection guard, full cabin, full free lift, safety light, LED,

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 73200 € 1383.48 € 2050 mm 20 mm 20 mm 16 mm 16 mm 12 mm 280 mm 280 mm 220 mm 1,5 / 5 m/min 16.5 kW 4350 mm 1700 mm 1850 mm 8550 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: Rbodeynmylopfx Af Tow the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 8,463 h, load capacity: 3,000 kg, lifting height: 3,300 mm, fuel type: gas, mast type: duplex, construction height: 2,270 mm, motor manufacturer: toyota, gearing type: automatic, Equipment: CE marking, front guard, head guard, lighting, sideshift, Specification: Forklift type: Petrol/LPG Item code: 10852 Manufacturer: TOYOTA Model: 02-8FGJF35 (30) Year: 2016 Lifting capacity, kg: 3000 Mast type: Duplex Lifting height, mm: 3300 Drive type: Automatic Operating hours: 8463 Country: France Rjdpfx Ajyrcv Ref Tobw Weight (kg): 4760 Dimensions (L x W x H, mm): 2850 x 1310 x 2270 Overall height, mm: 2270 Forklift attachments: Side-shift, heater, front and rear windshield Note: The forklift has been inspected – technically sound. A full service will be carried out before delivery.

Condition: new, mileage: 30 km, power: 205.94 kW (280.00 HP), fuel type: diesel, empty load weight: 6,000 kg, maximum load weight: 6,000 kg, overall weight: 12,000 kg, wheelbase: 3,690 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, USB port, additional headlights, air conditioning, airbag, blind spot assist, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hydraulics, immobilizer system, onboard computer, power assisted steering, power mirror, tachograph, tire pressure monitoring, traction control, truck registration, EU vehicle with warranty. Roll-off tipper 12T For container sizes 2800 - 4500 mm HAK - KING 8-ZR Telescopic arm Hook height H=1200 mm Redpfx Aspxl R Nof Tobw Payload 6,000 kg IVECO rear air suspension 6-speed manual gearbox Tachograph Air conditioning Car radio CD/MP3 + Bluetooth Hydraulically suspended driver's seat - Delivery, leasing, or financing available. - Available within 2-3 months. Also available with a roll-off container. Contact us: Auto-Wardenga Irenäus Wardenga, also via WhatsApp

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 61,953 h, machine/vehicle number: 035100300072, control type: CNC control, degree of automation: automatic, actuation type: mechanical, controller manufacturer: SIEMENS, controller model: SINUMERIK OP 010S, laser type: fiber laser, laser source manufacturer: IPG, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, table length: 3,200 mm, table height: 100 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 180 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 12,000 kg, total length: 7,830 mm, total width: 8,217 mm, year of last overhaul: 2023, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, ADILAS is a combined machine for laser cutting of carbon steel sheets (also known as mild steel), stainless steel, aluminum alloys, brass, and copper. The machine is equipped with: • A table change system that allows loading of a new sheet during the cutting process. Unloading of the processed parts takes place: • By means of the table not used during machining; once this table has been emptied, it will be used for loading the new sheet. Rjdpfx Aewyurujf Tsbw

Condition: good (used), Lifting platform, car lifting platform, lifting device, lifting lift, pit jack, axle free jack, truck lifting device, axle jack -Manufacturer: MWH Märkisches Werk Halver, truck lifting device pit jack -Type: Atlas LT -Load capacity: 2x 5000 kg -Lifting height: 1600 mm -Operating pressure: 60 bar -Accessories: included, see photos -Transport dimensions: 1000/940/H1400 mm Rbjdoikrpuspfx Af Tew -Total weight: 820 kg

Condition: good (used), Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch, Controller Ethernet, EtherCAT Box Manufacturer: Beckhoff, EtherCAT Box -Type: EP2028-0001 -Voltage: 24 V -Number: 2 modules available Rbedpfx Afexvrw Rs Tow Price: per piece -Dimensions: 130/30/H35 mm -Weight: 0.2 kg/pc.

Condition: ready for operation (used), NUM 207202 830M H 11162/056 9910 keyboard control interface 9611028 + 2 keys Serial number: 13586 Lapp cable - length: 1.25 m, used, in good condition, 100% functional, scope of delivery as per photos. Rbjdjx Et Rmopfx Af Tsw

Condition: ready for operation (used), No. FC 200 202 885 control board SN:76551 + FC 200 202 889 option card, used, minor signs of wear, 100% functional, scope of delivery as per photos Redpfxox Et Ryj Af Tjbw

Condition: ready for operation (used), Indramat KDS 1.3-100-300-W1 Controller SN:253759-02028, used, normal signs of use, 100% functional, scope of delivery as per photos Rbodpfx Aji Ebibsf Tjw

Condition: new, Kontron CP603 PC-Board SN:248072028, unused, 100% functional, scope of delivery as per photos Rbjdoi Ebwpepfx Af Tsw

Year of construction: 1995, condition: used, Cooling coil for sale due to no longer being needed. Rbsdpjx Iu S Dsfx Af Tew

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 821 kg, total length: 2,150 mm, total width: 1,430 mm, total height: 1,410 mm, Frequency-controlled 2-stage screw compressor 37 kW Working pressure -0.8 MPa (approx. 8 bar) Rjdpov Ura Tsfx Af Tjbw Delivery rate 7.72 m³/min at 0.8 MPa Super soundproof

Condition: good (used), Year of construction: 2017, Sahinler 4R HSS 20-280 Hydraulic 4-roll plate bending machine – Year 2017. Bending length 2050 mm Max. bending capacity - mild steel 20. Upper roll diameter 280 mm Lower roll diameter 280 mm Lateral roll diameter 220 mm Bending speed 1,5 / 5 m/min. Motor power 16 kW Rjdpfsxau D Isx Af Tebw

Condition: new, Year of construction: 2025, overall weight: 131 kg, fuel: super 95, fuel tank capacity: 3 l, Equipment: trailer coupling, The HS20288 log splitter from HZC Power offers an impressive splitting force of 20 tons and is ideal for splitting logs up to 600 mm long. Equipped with a robust 6.5 HP (208 cc) gasoline engine and a fast splitting cycle of 14 seconds, it enables efficient wood processing. The splitter operates horizontally and features two-hand operation for maximum safety. A trailer hitch allows for easy transport on private property. Furthermore, the integrated frame ensures secure support of the logs, making it suitable for both professional and home use. General Specifications: Manufacturer: HZC Power Model: HS20288 Splitting Force: 20 t Maximum Splitting Length: 600 mm Splitting Cycle: 14 s Hydraulic Oil Capacity: 10 l (HLP46) Product Weight: 131 kg Rodpfxowal Ako Af Tobw Shipping Weight: 150 kg Special Features: Trailer Hitch: For easy transport on private land Splitting Wedge/Cross Bar: Permanently mounted for effective splitting Working Position: Horizontal, ideal for working at low heights Two-Hand Operation: Increases safety by keeping both hands out of the splitting area Hydraulic System: High oil pressure of 270 bar for powerful splitting Oil Filter: Extends the service life of the hydraulic system Integrated Frame: Ensures secure hold of the split material Engine: Manufacturer: Jiao Model: Gasoline engine 6.5 HP Engine technology: Single-cylinder, 4-stroke, air-cooled, OHV Displacement: 208 cc Fuel tank capacity: 3.1 l Oil capacity: 0.6 l Engine weight: 16 kg Dimensions (W x L x H): 321 x 376 x 346 mm Performance features: Splitting force: 20 tons for powerful wood splitting Splitting length: Up to 600 mm for various log sizes Splitting cycle: Fast 14-second cycle for high working speed Two-hand operation: Increases safety by keeping both hands out of the splitting area at all times Hydraulic system: High oil pressure of 270 bar for powerful wood splitting Hydraulic oil: 10 l HLP46 for stable operation Oil filter: For a longer service life of the hydraulic system Trailer hitch: Allows easy transport on private land Off-road Frame construction: Integrated frame for secure support of the logs Fuel tank: 3.1 l for extended operating times Oil capacity: 0.6 l for the engine (10W40 or 15W40) Pre-assembled: Ready to use quickly The HS20288 log splitter comes with a well-thought-out package that allows for a quick start: Pre-assembled: The log splitter is already partially assembled and ready to use. Jiao gasoline engine (6.5 HP): Powerful 208cc engine, integrated and ready to use. Trailer hitch: Facilitates transport on private property. Hydraulic oil (HLP46): Already partially filled, so the splitter is ready to use immediately. Two-hand operation: For safe operation, both hands must remain outside the splitting area. Splitting wedge/crosspiece: Permanently mounted for effective splitting. Transport packaging: Robustly packaged to ensure safe arrival. Our customer service is available at any time to answer any questions you may have about the scope of delivery or commissioning!