Low lift pallet truck

Year of construction

2024

Condition

New

Location

Romano di Lombardia Italy

Show map

Machine data

Machine type:: Low lift pallet truck

Year of construction:: 2024

Condition:: new

Functionality:: fully functional

Price & Location

Location:: Via dell'Industria 5, 24058 Romano di Lombardia, Italia

Rental:: is possible

Call

Technical details

Load capacity:: 2,000 kg

Lifting height:: 190 mm

Load center:: 500 mm

Fuel type:: electric

Overall weight:: 160 kg

Total length:: 1,670 mm

Total width:: 685 mm

Color:: orange

Details about the offer

Listing ID:: A171-64622

Update:: 26.09.2024

Description

Data Sheet Electric Pallet Truck - Lifting Capacity 2000 KG
Distinctive Features:

Load Capacity: Up to 2000 kg
Precision Mode (Turtle Function): Enables slow, controlled movements for high accuracy during operations in tight spaces.
Large Controls: Large buttons easily accessible even when wearing protective gloves.
Multifunction display: Real-time monitoring of battery level, hours of use and diagnostic system.
Vertical tiller steering: Functionality that enables optimal maneuverability in narrow aisles, elevators and inside trucks.
Battery:

Battery type: maintenance-free AGM (Absorbed Glass Mat).
Specifications: 48V / 25Ah.
Charging time: About 3.5 hours.
Operating time: About 5 hours of continuous operation.
Expandability: Ability to add a second battery to extend uptime.
Technical Specifications:

Dimensions (Length x Width): 1670 x 685 mm
Total weight (including battery): 160 kg
Maximum lifting height: 190 mm
Distance from the center of gravity (C): 500 mm
Overall width of forks: 560 mm
Fpedeun Imrspfx Afusd
Turning radius: 1460 mm
Minimum ground clearance: 24 mm
Maximum surmountable slope: 6% with load, 20% without load
Power supply:

Power supply type: Electric
Voltage: 48V
Battery capacity: 25 Ah

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2018

14 listings online

Call

Send inquiry

Telephone & Fax

+39 0363 ... show

These listings may also fit your interest.

Auction

Nordrhein-Westfalen

7,705 km

CNC lathe
GILDEMEISTERSPRINT 65 Linear

€19,700

To the auction

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,700 h, functionality: fully functional, travel distance X-axis: 165 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, controller model: SIEMENS 840 D, Equipment: chip conveyor, TECHNICAL DETAILS X1 travel: 165 mm Z1 travel: 220 mm X2 travel: 165 mm Z2 travel: 150 mm X3 travel: 165 mm Z3 travel: 650 mm Y3 travel: 80 (+50/-30) mm Bar capacity: 65 mm Main and sub-spindle speed: 5,000 rpm Turrets: 3, each with 12 stations (all driven) Driven tool speed: 4,000 rpm Tool holder: VDI 30 with drive, DIN 5480 MACHINE DETAILS Control: SIEMENS 840 D Operating hours Power-on hours: 52,511 h Spindle hours: 32,700 h EQUIPMENT C-axis Y-axis Coolant system Chip conveyor Fpsdpfxoymmdbs Afued Bar feeder TOP Automazioni XF 375

See details

Auction

Thread milling machine SCHIESS-KOPP FK 12.32 CNC

Baden-Württemberg

7,894 km

Thread milling machine
SCHIESS-KOPPFK 12.32 CNC

€7,500

To the auction

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller model: SIEMENS SINUMERIK 810, workpiece length (max.): 830 mm, milling spindle speed (min.): 100 rpm, milling spindle speed (max.): 4,500 rpm, mount diameter: 78 mm, TECHNICAL DETAILS Milling spindle speed range: 100 - 4,500 rpm Maximum workpiece length: 830 mm Maximum workpiece diameter with double tooling: 135 mm Spindle mount: 2 x SK 40 Spindle nose: DIN 55026 Size 5 Mounting diameter: 78 mm Center distance: 135 mm Front bearing diameter: 110 mm Workpiece Slide (X-Axis) Workpiece slide travel: 810 mm Max. feed rate: 6 m/min Fpjdpfx Afeyl U Tusuod Clamping surface: 200 x 1,750 mm Tool Post (Z-Axis) Tool slide travel: 120 mm Max. feed rate: 2 m/min Tool post adjustment: 200 mm Tailstock Tailstock quill travel: 100 mm Morse taper: 3 MT Centre height: 260 mm Quill center distance: 135 mm Steady rest through-hole: 40 - 80 mm MACHINE DETAILS Drive power: 5100 W Control system: SIEMENS SINUMERIK 810 Dimensions & Weight Dimensions (L x W x H): approx. 3.20 x 2.66 x 1.76 m Machine weight: approx. 6.5 t EQUIPMENT Various tool holders Steady rests Centre points, medium Coolant system

See details

Auction

Bed type milling machine - Universal UNION-Bielefeld BF 650 U-II

Baden-Württemberg

7,894 km

Bed type milling machine - Universal
UNION-BielefeldBF 650 U-II

€13,000

To the auction

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 50 rpm, TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,200 mm Spindle speeds: 50 - 2,000 rpm Spindle torque: 3,000 Nm Spindle taper: SK 50 Feed rate - X / Y / Z axis: 2 - 2,000 mm/min Rapid traverse - X / Y / Z axis: 7,000 mm/min Table clamping surface: 2,000 x 800 mm Rotary table diameter: 800 mm Number of tool magazine stations: 56 Tool diameter (all stations filled): 114 mm Tool diameter (with 2 free positions): 200 mm Max. tool length: 400 mm Max. tool weight: 16 kg Tool change time: approx. 8 - 9 sec Control system: SIEMENS SINUMERIK 850 M Fpsdeyl U Thjpfx Afujd MACHINE DETAILS Spindle motor power: 30 kW Dimensions & Weight Dimensions (L x W x H): approx. 6.6 x 3.15 x 2.98 m Machine weight: approx. 25.4 t EQUIPMENT Tool presetting device Various tool holders Chip conveyor Internal coolant supply Coolant system with high-pressure pump and filtration unit Electronic handwheel Fixators

See details

Auction

Bayern

8,187 km

Milling machine
Geiss2000 x 1000

€11,000

To the auction

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 9520190, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 30,000 rpm, overall weight: 3,300 kg, In July 2025, the drive module, hard disk module, PLC card, and the screen module with keyboard were replaced at a cost of €24,000. A replacement spindle can be purchased separately for €4,000. TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 1,000 mm Z-axis travel: 560 mm Spindle speed: 30,000 rpm MACHINE DETAILS Interface: USB WiN PCIN Control: Siemens Sinumerik 840 C Weight: 3,300 kg Voltage: 380 V 50 Hz Fjdpfsymmtvex Afuopd Rated current: 38 A EQUIPMENT Central lubrication system

See details

Auction

Nordrhein-Westfalen

7,642 km

Universal machining center
OKKVC-X350

€17,500

To the auction

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: MAJ5117A, controller model: FANUC F31i-B5, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 60, The machine was in use until it was decommissioned in 2024. The cab door and the 5th axis are not functioning properly. The fault has not been further diagnosed. The original purchase price of the machine was EUR 265,000! TECHNICAL DETAILS Spindle speed: 12,000 rpm Tool holder: BT40 BigPlus Tool positions: 60 MACHINE DETAILS Control: FANUC F31i-B5 Coolant pressure (IKZ): 70 bar EQUIPMENT: Fedpfxjymbz Ie Afuspd IKZ 5 axes with chuck

See details

Auction

Universal machining center POS POSmill H 800 U

Nordrhein-Westfalen

7,642 km

Universal machining center
POSPOSmill H 800 U

€175,000

To the auction

Condition: excellent (used), Year of construction: 2021, operating hours: 11,514 h, functionality: fully functional, machine/vehicle number: 20210202, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 640, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 820 mm Travel Z-axis: 600 mm Spindle speed (min.): 18,000 rpm Fpedpfxsymbb Io Afuod Spindle operating hours: 11,514 h Coolant supply: 40 bar MACHINE DETAILS Apparent power rating: 90 kVA Control manufacturer: Heidenhain Control model: TNC 640 Total weight: 20,000 kg Input voltage: 400 V Full load current: 125 A Max. current load: 200 A Short-circuit resistance: 25 kA Voltage: 400.50 V/Hz Net weight: 20,000 kg Machine number: 20210202 EQUIPMENT Documentation/Manual Chip conveyor

See details

Auction

Vertical machining center Doosan VC 630/5AX

Nordrhein-Westfalen

7,642 km

Vertical machining center
DoosanVC 630/5AX

€15,000

To the auction

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, machine/vehicle number: MV0043-000317, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller model: Fanuc 0iM, Equipment: chip conveyor, The machine was in use until it was decommissioned in 2024. The only known limitation is that the tool changer is not functional. The original purchase price of the machine was EUR 193,000! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 765 mm Travel Z-axis: 520 mm MACHINE DETAILS Control: Fanuc 0iM Fedpfx Aoyma H Nofuopd Rated apparent power: 53 kVA Coolant supply: 20 bar Input voltage: 380 V Type of input current: Three-phase current Mains connection: AC 380 V, 3~, PE, 50/60 Hz Rated power: 53.3 kVA Interrupting capacity: 5 kA Full load current: 84.1 A Short-circuit capacity: 10 kA Weight: 12,500 kg EQUIPMENT Documentation/manual Chip conveyor

See details

Auction

Nordrhein-Westfalen

7,642 km

Lathe
BuffaloBNC-2660X

€6,000

To the auction

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, machine/vehicle number: 1511151394, turning length: 1,500 mm, turning diameter: 650 mm, spindle bore: 82 mm, spindle speed (max.): 2,400 rpm, overall weight: 4,300 kg, The machine was used without any restrictions or known defects until it was decommissioned. The original purchase price of the machine was EUR 79,000! TECHNICAL DETAILS Turning length: 1,500 mm Turning diameter: 650 mm Spindle bore: 82 mm Spindle speed range: 80 - 2,400 rpm MACHINE DETAILS Weight: 4,300 kg Drive power: 35 kVA Frequency: 50 Hz Full load current: 52 A Number of phases: 3 + PE Short-circuit protection: 25 kA Nominal voltage: 400 V Fodpsymay Aofx Afuopd Max. load current: 520 A EQUIPMENT Documentation / Manual

See details

Auction

Nordrhein-Westfalen

7,694 km

Rod machining center
ElumatecSBZ 130

€500

To the auction

Year of construction: 2010, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rotational speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 8,500 mm Fedoypbmiopfx Afujpd Y-axis travel: 480 mm Z-axis travel: 325 mm Max. spindle speed: 15,000 rpm Spindle power: 5.5 kW Tool holder: BT 30 MACHINE DETAILS Tool changer: 8 positions EQUIPMENT Tools

See details

Auction

Rheinland-Pfalz

7,791 km

Decanter
GEACF 3000

€55,000

To the auction

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, overall weight: 2,000 kg, rotational speed (max.): 4,700 rpm, TECHNICAL DETAILS Drum diameter: 340 mm Maximum drum speed: 4,700 rpm g-factor: max. 4,198 g MACHINE DETAILS Fjdpfx Afoymx N Ajuepd Main motor power: 22 kW Secondary motor power: 11 kW Motor operation: Frequency converter Drive system: Summation drive Inlet and outlet connections: DIN 11864-2 DN40 / DN25 Dimensions & Weight Dimensions (L x W x H): 3,300 x 870 x 1,500 mm Weight: 2,000 kg EQUIPMENT Temperature sensors on both drum bearings Level monitoring for gearbox oil and oil-air lubrication Pressure sensor for oil-air lubrication Vibration monitoring: continuous monitoring of drum bearings on both sides Speed monitoring via proximity sensors Further configuration details can be found in the attached document.

See details

Advertise here