New bottle skimming machine

KHS

Condition: used, Year of construction: 2013, Overview This KHS Innopro KZE 72 is a flash pasteurizer (short-time heating system) for beer, cider and other carbonated beverages, built in 2013 by KHS GmbH (Dortmund, Germany). Working with a plate heat exchanger, it gently pasteurizes at a nominal capacity of 72 hl/h and is designed for a product flow between 24 and 72 hl/h with a maximum CO₂ content of 6.5 g/l. The system comes complete with its 50.8 hl buffer tank and the control cabinet with touchscreen HMI. The unit comes out of a large brewery, is still installed and can be visited on request. Technical data - Manufacturer: KHS GmbH (Dortmund, Germany) - Model: Innopro KZE 72/T4-72-12/PT45A - Year of manufacture: 2013 - Machine type: flash pasteurizer with plate heat exchanger - Nominal capacity: 72 hl/h - Minimum adjustable capacity: 24 hl/h - Capacity during CIP cleaning: 85 hl/h - Maximum CO₂ content in the product: 6.5 g/l - Pasteurization temperature: 72 °C (beer) / 85 °C (cider) - Holding time: 30 s - Product inlet temperature: 4 °C; product outlet temperature: max. 4 °C - Supply pressures: product 3.5 bar(g), steam 3 - 6 bar(g), coolant 1.5 - 2 bar(g), CIP 4 bar(g) - Electrical connection: 400 V, 50 Hz, 3-phase - Dimensions pasteurizer skid: approx. 4,600 x 3,500 x H 2,900 mm - Weight pasteurizer skid: approx. 3,100 kg (frame incl. plate heat exchanger) Equipment - Pasteurizer skid with plate heat exchanger type PT45A, pumps and valve manifold - Buffer tank: 50.8 hl gross / 45.5 hl working volume, inner Ø 1,600 mm, H 3,420 mm, approx. 1,120 kg, operating pressure up to 5 bar(g), CO₂ and sterile air connections 6 - 8 bar(g) - Control cabinet with touchscreen HMI - OEM technical documentation (operating manual) Itodpfozvfbcsx Af Ujk Condition Used - good working condition. The system was in production in a large brewery until recently, is still installed and can be inspected. Availability Immediately. Location: Netherlands. Dismantling and loading by arrangement.

Condition: good (used), Year of construction: 2006, production capacity: 18 unit/h, For sale: KHS mixer, capacity 18 m³/h, manufactured in 2006, model KHS INNOPRO CMX-18. Attached are photos of the mixer and its nameplate, as well as a schematic diagram of the pumps and valves. The machine will be available starting in October 2026. It is in good technical condition and currently operates without any problems. Net price (ex-works Gorzanów): 60,000 EUR. Itjdpfxjzu Ni Ie Af Ujk

Condition: used, Year of construction: 1984, A carousel system for cleaning the inside of and filling kegs. Additional title: cleaning and filling Capacity: 60 Keg/h each 50 l Formats: 20 l-, 30 l- and 50 l-keg-barrels (DIN and Euro) Base construction: rotary Features: 4 cleaning heads, 1 filling head Iedpfx Afoztyyzo Uotk

Condition: used, Year of construction: 1984, Keg cleaning and filling system, comprising a keg conveyor, an external washer and a rotary system for internal cleaning and filling. Iedpfx Aeztx Uwof Uetk Additional title: cleaning and filling Capacity: 60 Keg/h each 50 l Operation / Control: Siemens S7-300 Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet

Year of construction: 1992, condition: ready for operation (used), A two-component mixing/carbonation system by KHS for the production of still and/or carbonated beverages is available. Throughput capacity: approx. 12000l-25000l/h, tank volume degassing/buffer: 2m³/2m³, mixing accuracy: +/-0.05°Brix, CO2 dosing accuracy: +/-0.1g/l, CIP cycle rinsing time: 20min. Machine dimensions X/Y/Z: approx. 3000mm/2200mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Itjdoxqgxxepfx Af Uok

Condition: ready for operation (used), Year of construction: 2009, A fully automatic rotary labeling machine Anker (KHS Group) is available. Labeling method: wet glue labels, bottle formats: 250ml/500ml/750ml, label dimensions 1 X/Y: 33mm/119mm, label dimensions 2 X/Y: 36mm/150mm, label dimensions 3 X/Y: 48mm/158mm, labeling capacity: 20000bottles/h. Including formats for wet glue and VE+RE. Documentation available. An on-site inspection is possible. Iodpfx Aeyv H Iyjf Uotk

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 Iodpfx Ajzlqu Tjf Ustk - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: used, Year of construction: 1992, Overview This O+H / KHS Hansacan can filler, blocked with a Ferrum can seamer, is a rotary can filling and seaming monoblock for beverage cans. Filler and seamer are joined as a single unit, so cans run from filling straight through to seaming in one continuous flow. The block is set up for standard 330 ml cans (can type 211 / 202) and reaches a rated output of approximately 20,000 cans per hour, depending on product and filling temperature. The block was previously in production in a commercial brewery filling 330 ml cans and is currently at the workshop undergoing a complete reconditioning before delivery. Filling parameters and production data are managed via a Siemens SIMATIC touch HMI, with machine control on a Siemens S7 PLC. Technical data - Manufacturer: O+H / KHS - Model: Hansacan can filler - Seamer: Ferrum can seamer, F 505 G - Year of manufacture: filler 1992, seamer 2010 - Machine type: rotary can filler and seamer monoblock - Filling valves: approx. 30 (type Hansacan) - Seaming heads: 5 - Capacity: approx. 20,000 cph at 0.33 L (product- and temperature-dependent) - Can format: 330 ml standard cans, can type 211 / 202 - Products: beer, carbonated beverages - Control: Siemens S7 PLC with Siemens SIMATIC touch HMI Equipment - Filler and seamer supplied as one blocked unit Ijdpfjzlqu Hsx Af Ustk - New electrical panel with Siemens S7 PLC and SIMATIC touch HMI (reconditioning scope) - New pneumatic panel with renewed pneumatic valves (reconditioning scope) - Beer regulating valve ahead of the beer inlet, CIP tulips and CO₂ injection before seaming - Set up for can type 211 / 202, 330 ml - Manuals, spare-part list and electrical documentation for filler and seamer (provided with the machine) - CE declaration to be issued on completion of reconditioning Condition Used - currently undergoing a complete reconditioning at the workshop and to be delivered fully overhauled, supplied as a blocked filler and seamer unit. The reconditioning scope and the CE declaration are committed as part of the sale and are not yet complete. The block was previously in production in a commercial brewery filling 330 ml cans. Availability On request, after completion of the reconditioning. Location and firm delivery date on request.

Condition: used, Year of construction: 1984, Glass bottle filler and capper equipped with short-tube filling valves for filling bottles to a specific level (volume filling). The bottles are pre-evacuated (11 kW vacuum pump from GEA Ahlborn). Additional title: Short-tube filler with pre-evacuation and crown cap sealer Capactity: 44000 bo/h Number of filling valves: 90 pcs. Number of capping heads: 15 pcs. Formats: 0,5 l NRW bottles; crown caps Material: housing and contact surfaces from stainless steel Base construction: caroussel-type filling and capping block Features: filling carousel with 90 short-tube filling valves; crown cap sealer with 15 sealing heads; vacuum pump; bottle and cap rinse; bottle conveyor with drives and format components; protective housing with doors; control cabinet with fittings; control panel with touchscreen Itsdjzi Alxepfx Af Uok

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used filling KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer pre... Isdpfx Afjy Szbys Ujtk