Electric Forklift

Jungheinrich EFG 110k

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,697 h, load capacity: 1,000 kg, lifting height: 5,500 mm, free lift: 1,885 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 2,892 kg, total length: 1,650 mm, drive type: Elektro, construction width: 1,080 mm, Electric 3-wheel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Technical condition: good Front tire type: Superelastic Front tire size: 2 x 18x7-8 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 1 x 18x7-8 Rear tire condition: 40 - 60% Battery voltage: 24V Battery capacity: 500Ah Fjdpfx Aj Af D I Djctjpp Battery year of manufacture: 2017 Additional single hydraulic circuit, integrated side shifter, load guard, battery, charger, blue spot, 2 front work lights, 1 rear work light.

Condition: used, Heißfolienprägemaschine / Hot Foil Stamping KIS MIC Junior Fjdpfx Ajv Sc Ddsctspp Year 1982 - Serial-No. MJ1282520 Prgefläche / Hot Foil Stamping area max. 75 x 180mm Druckleistung / Pressure max. 600Kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: refurbished (used), Year of construction: 2022, operating hours: 3,664 h, load capacity: 1,000 kg, lifting height: 3,000 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 1,955 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 2,121 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically reconditioned according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after purchase Test and get advice on-site now – we will find the right solution for you. Forklift data: Manufacturer: Jungheinrich Type: Front forklift EFG 110k Fpjdpfx Acsz Ikg Sjtop Drive type: Electric Load capacity: 1,000 kg Year of manufacture: 2022 Operating hours: 3,664 Lifting height: 3,000 mm Mast type: Duplex Free lift: Yes Overall height: 1,955 mm Fork length: 1,150 mm Unladen weight: 2,121 kg Load center: 500 mm Tires: Polyurethane Model type: EFG 110k Voltage: 24 V Battery weight: 402 kg Attachment: Side shifter

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 10,362 h, load capacity: 1,600 kg, lifting height: 3,100 mm, free lift: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 2,050 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,100 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 16 x 6 -8, overall weight: 3,288 kg, total height: 2,050 mm, total length: 2,100 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, JUNGHEINRICH EFG 316 K 110-310 ZZ – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.100 mm Closed height: 2.050 mm Free lift: 1.400 mm Fpjdpfxoz Aprxo Actep Mast: Duplex (2F310) Fork length: 1.100 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 625 Ah v. 2016 Charger: Dreiphasig 48 V 100 A Tyres: Superelastik SE 18 x 7 - 8 (70%) / 16 x 6 -8 (70%) Service weight: 3.288 kg Length: 2.100 mm Width: 1.070 mm Year of manufacture: 2017 Operating hours: 10.362 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights ATTACHMENTS Sideshift, Fork positioner Internal no.: 1308624 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2019, ## Universal Robots UR5 with CB3.1 Controller The CB3.1 (Control Box 3.1) is a robust and widely utilized control platform known for its stability and user-friendly interface. Paired with a 2019–2020 UR5 arm, this configuration offers a highly reliable automation solution that balances modern safety standards with simplified industrial integration. ### Hardware Overview * Teaching Pendant: 12-inch wide-screen resistive touch pendant with a user-friendly GUI (PolyScope). Fpedpfx Ajyy Itfectop * Digital I/O: 16 Digital Inputs and 16 Digital Outputs. * Analog I/O: 2 Analog Inputs and 2 Analog Outputs. * Communication: Modbus TCP, PROFINET, Ethernet/IP, and TCP/IP. * Power Source: 100-240 VAC, 50-60 Hz. --- ### Key Technical Benefits * Enhanced Safety Logic: The 3.1 revision features improved safety-rated I/O and dual-channel safety circuitry, allowing for Category 3, PLd safety configurations without complex external hardware. * Proven Stability: As the final and most refined iteration of the CB3 series, the 3.1 controller is optimized for high uptime and is compatible with a massive library of legacy UR+ grippers and sensors. * Programming Versatility: Supports both Graphical Programming (Polyscope) for beginners and URScript for advanced users who require complex logic and external peripheral control. * Small Footprint: The compact cabinet design allows it to be tucked under workstations or mounted in tight spaces, mirroring the agility of the UR5 arm itself. --- ### Connectivity & Expansion The CB3.1 controller acts as the central hub for your entire work cell: * Tool I/O: Provides 12V/24V power and I/O directly at the tool flange, minimizing the need for external cables along the arm. * Remote Control: Can be easily integrated into a Master PLC system via standard industrial Ethernet protocols. * Quick Setup: Features a "Teach" button on the back of the pendant for easy manual guidance of the robot arm. --- ### Technical Summary Table | Feature | Specification | | :--- | :--- | | Safety Functions | 15 Configurable Safety Functions | | I/O Ports | 16 DI, 16 DO, 2 AI, 2 AO | | IP Rating | IP20 (Controller) / IP54 (Robot Arm) | | Ambient Temp | 0°C to 50°C | | Software | PolyScope (CB3 Edition) |

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN463189, Year of construction: 2013, operating hours: 445 h, load capacity: 1,000 kg, lifting height: 4,500 mm, free lift: 1,400 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,080 mm, gearing type: automatic, battery manufacturer: Jungheinrich, battery model: 12/5PzS 625, battery capacity: 625 Ah, battery voltage: 24 V, battery weight: 447 kg, DGUV certified until: 02/2027, fork length: 1,100 mm, tire condition: 80 %, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), overall weight: 2,805 kg, empty load weight: 2,358 kg, total height: 2,080 mm, color: yellow, Equipment: CE marking, UVV, lighting, pallet forks, sideshift, Price: €9,500 net €11,305 gross SKU: 702 Basic Information: - Manufacturer: Jungheinrich - Model: EFG 110k - Year of manufacture: 2013 - Recorded operating hours: 445 h Technical data: - Drive: Electric - Transmission: Electric - Pedals: Single-pedal control - Controls: Multipilot - Battery: 24 V 12/5PzS 625 Ah (KW08/2020) - Charger: Included Mast / Dimensions: - Overall height: 2080 mm - Lift height: 4500 mm - Free lift: 1400 mm - Mast type: Triplex mast - Fork length: 1100 mm - Rated capacity: 1000 kg - Load center: 500 mm Tyres: - Type: Superelastic tyres (SE) Hydraulic equipment: - Sideshift: Integrated - Fork positioner: No - Rotator: No - Additional hydraulics: Fully equipped Equipment: - Cabin: Partial cabin - Lighting: 2x front Fodpfjyivrmox Actopp - Safety features: Seat belt - Heater: No Extras: - UVV safety inspection newly performed upon request - Immediately ready for operation - Inspection and test drive possible on site by appointment Transport: Affordable shipping available on request. Invoice with VAT: You will always receive an invoice with VAT shown separately. Battery: For battery-powered equipment, we are happy to offer you a quotation including a new battery if required. Contact: If you have any questions or are interested, please contact us by phone, email, or via the contact form.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN448063, Year of construction: 2013, operating hours: 850 h, load capacity: 1,000 kg, lifting height: 3,600 mm, free lift: 1,600 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,240 mm, gearing type: automatic, battery manufacturer: Jungheinrich, battery model: 24V 4 PzS 500, battery capacity: 500 Ah, battery voltage: 24 V, battery weight: 372 kg, DGUV certified until: 02/2027, tire condition: 90 %, front tire type: cushion tires (black), rear tire type: superelastic tires (black), overall weight: 2,596 kg, empty load weight: 2,224 kg, color: yellow, Equipment: CE marking, UVV, lighting, pallet forks, sideshift, Price: €8,500 net €10,115 gross SKU: 703 Basic Information: - Manufacturer: Jungheinrich - Model: EFG 110k - Year of manufacture: 2013 - Operating hours: 850 h Technical Data: - Drive: Electric - Transmission: Electric - Pedals: Single-pedal control - Controls: Solopilot joystick - Battery: 24V 4 PzS 500 Ah (production week 06/2020) - Charger: Included Mast / Dimensions: - Overall height: 2,240 mm - Lift height: 3,600 mm - Free lift: 1,600 mm - Mast type: Duplex mast - Fork length: 1,150 mm - Rated capacity: 1,000 kg - Load center: 500 mm Tyres: - Type: Super elastic (SE) tyres Hydraulic Equipment: - Side shifter: Integrated - Fork positioner: No - Rotator: No - Additional hydraulics: No Equipment: - Cabin type: Partial cabin - Lighting: 2x front, 1x rear - Safety equipment: Seat belt - Heater: No Extras: - UVV inspection: New on request - Immediately operational - Viewing & test drive possible on site by appointment Transport: Affordable shipping available on request. Fpsdpfjyivtdox Actjp Invoice with VAT: You will always receive an invoice showing VAT. Battery: For battery-powered equipment, we are happy to offer you a quotation including a new battery. Contact: For questions or if you are interested, please contact us by phone, email, or contact form.

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: AC, Horizon SPF-200L+FC-200L+LC-200 stiching machine. (not including collator). Fpsdpjy R Ayhjfx Actjp The machine is in original packaging (brand new, it was never used). As official deler we can do installation and training.

Year of construction: 2007, condition: used, An ARISTO flatbed cutting and routing system with MultiHead IV, HF Routing Device, color camera and ARISTOprojection is offered. Cutting width: 2300mm, static repeatability: +/-0.08mm, max. material clearance thickness: 55mm, drive system: digital AC servo motors, data format: HPGL compatible, interface: RS232C/V.24, transmission speed: 38400baud, vacuum system: adjustable matrix vacuum zones. 2) MultiHead IV type 4021/OT.M.P. IV-1, electrically oscillating tool axis, max. pressure: 180N at 6bar, integrated laser pointer, color camera with AutomaticEye registration system, tool head dimensions W/H/D: 166mm/390mm/330mm, weight: approx. 8.5kg. 3) HF Routing Device for spindles 4040 DC/4040 DC-S, max. speed: 50000rpm/60000rpm, power: max. 800W/1000W, Z-axis stroke: 50mm, collet range: 1.5mm-6.35mm. 4) ARISTOprojection for 1:1 projection of the contours onto the working area. Machine was regularly maintained. Documentation available. Inspection possible by arrangement. Fpodpjzuzz Nsfx Actsp

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, laser power: 3,000 W, New Senfeng SF1313G 3 kW Laser Cutting Machine for Sale Precision Laser Cutter for Metal, Acrylic & Plastics – Available Immediately We offer a used Senfeng SF1313G laser cutting machine with 1.5 kW for sale. The machine is fully operational, reliable, and ideally suited for processing metal, acrylic, and plastics – perfect for companies, workshops, or start-ups looking for a CNC laser cutter. Thanks to its compact design and powerful laser, the SF1313G is ideal for precise laser cutting and a variety of industrial applications. Technical specifications & features Machine attributes Manufacturer: Senfeng Model: SF1313G Power: 3 kW Type: CNC laser cutter / laser cutting machine Materials: Metal Condition: used, inspected, fully functional Advantages of the Senfeng SF1313G - Precise laser cutting for various materials - Easy operation & reliable performance - Ideal for industry & trades - Compact design, easy to integrate into workshops Why choose this laser cutter? - Used, but fully functional: Ready for immediate use - Industrial quality: For precise metal processing - CNC control: Accurate and repeatable results - Versatile: Suitable for workshops, start-ups, small batch production - Regionally available: Located in Thuringia / fast pick-up possible --- Model Overview SF1313G MAX 3000W Laser Cutting Machine Features: - High-strength machine bed - Fully automatic focus - High-strength aluminium alloy beam - Intelligent following system G·Classic Series Fedpfxeyxf Rlj Actepp Technical Parameters (SF1313G) 1. Work area: 1300×1300 mm 2. X-axis travel: 1300 mm 3. Y-axis travel: 1300 mm 4. Z-axis travel: 100 mm 5. X/Y positioning accuracy: ±0.05 mm 6. X/Y repeatability: ±0.02 mm 7. Maximum speed: 80 m/min 8. Maximum acceleration: 0.8 G 9. Total weight: 1870 kg 10. Maximum load: 220 kg 11. Dimensions: 2985×2160×2000 mm 12. Phase: Three-phase 13. Voltage: 380 V 14. Frequency: 50 Hz 15. Protection class: IP54 Cutting Parameters (Stainless Steel + Carbon Steel) Stainless Steel: 1 mm – 30-45 – N2/Air 2 mm – 20-25 – N2/Air 3 mm – 8-10 – N2/Air 4 mm – 5-6 – N2/Air 6 mm – 2-3 – N2/Air 8 mm – 1-1.5 – N2/Air 10 mm – 0.5-1 – N2/Air 12 mm – 0.4-0.6 – N2/Air Carbon Steel: 1 mm – 30-40 – Air/N2 2 mm – 15-20 – Air/N2 3 mm – 3.5-4.5 – O2 6 mm – 2.5-3.5 – O2 8 mm – 1.8-2.3 – O2 10 mm – 1.4-1.8 – O2 12 mm – 1.0-1.4 – O2 14 mm – 0.8-1.0 – O2 16 mm – 0.7-1.1 – O2 20 mm – 0.5-0.7 – O2 Cutting Parameters (Brass + Aluminium) Brass: 1 mm – 25-30 – N2/Air 2 mm – 12-17 – N2/Air 3 mm – 5-6 – N2/Air 4 mm – 2-3.5 – N2/Air 5 mm – 1.8-2.5 – N2/Air 6 mm – 0.8-1.0 – N2/Air Aluminium: 1 mm – 30-35 – N2/Air 2 mm – 14-20 – N2/Air 3 mm – 8-10 – N2/Air 4 mm – 5-6.5 – N2/Air 5 mm – 2.5-3.5 – N2/Air 6 mm – 1.2-1.5 – N2/Air 8 mm – 0.7-1.3 – N2/Air Warranty – 2 years