Forklift

HYSTER H5.5FT LPG

Condition: good (used), Year of construction: 2015, operating hours: 4,124 h, fuel type: gas, mast type: duplex, power: 44 kW (59.82 HP), gearing type: automatic, fork length: 1,400 mm, color: yellow, Transmission: DuraMatch, Automatic Year of manufacture: 2015 Empty weight: 3.980 kg Maximum passing height: 1 mm Connector: FEM class 2 Technical condition: good Lrjdpfxez D Et Se Aphjt Visual appearance: good Mast type: duplex

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 30,000 mm, total length: 65,000 mm, total height: 10,000 mm, GALVANIZED STEEL STRUCTURE FOR A 1,950 M2 WAREHOUSE Industrial warehouse with a floor area of 1,950 m2, designed for a location near the sea, with the following dimensions: DIMENSIONS: Width: 30 m (Exterior). Length: 65 m (Exterior). Height: 10 m (Clear Interior). Two-pitched roof with a 10% slope. Constructed with S 275 grade steel profiles, rolled and galvanized for the main steel structure, and galvanized formed sections for the secondary roof purlin structure. The finish of the Main Structure (Columns, Beams, and Trusses) will be hot-dip galvanized at 450°C according to UNE-EN ISO 1461:2009 standards. In the case of the THC profiles of the Trusses, they will also be galvanized on the inside, ensuring complete protection of this structure, both on the inner and outer faces of all its profiles. INCLUDES: - CE marking for steel structures according to UNE-EN 1090-2:2011. - Detailed engineering, calculation report, structural drawings, and foundation plans. - APPENDIX OF CALCULATIONS APPROVED BY THE ENGINEERS’ ASSOCIATION, complying with data, loads, and assumptions provided by the client. - Certified fasteners for the assembly of the structure. NOT included in the budget: Anchor plates and purlins. These can be manufactured upon request. Transport and packaging not included. Delivery conditions EXWorks, including loading onto a truck – Talleres Ruiz FCA – Pol. La Portalada C/ Nevera, 3 Lrodpfezuar Tsx Aphot 26006 Logroño (La Rioja) - SPAIN - Incoterms® 2020 CE marking and manufacturer's warranty with more than 60 years of experience in the sector.

Condition: used, Year of construction: 2011, operating hours: 13,507 h, lifting height: 4,670 mm, fuel type: gas, mast type: duplex, power: 46 kW (62.54 HP), motor manufacturer: Mazda 4cil, fork length: 1,200 mm, color: other, Weights Empty weight: 4.490 kg Functional Lifting capacity: 2.500 kg Maximum passing height: 303 cm Lrjdpsv D Ec Hefx Aphet Number of valves: 3 Condition General condition: average Technical condition: average Visual appearance: average Other information EPA Marked: yes Fork carriage: Fork spreading Additional information Please contact Bas Sindorf for more information

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,300 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, gearing type: automatic, battery voltage: 80 V, battery weight: 1,580 kg, fork length: 1,150 mm, tire condition: 95 %, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), empty load weight: 6,400 kg, total height: 2,200 mm, Equipment: cabin, full service history, lighting, pallet forks, sideshift, trailer coupling, For sale: Used Toyota electric forklift, type 8FBMT 35, year 2018, with triplex free lift mast! Overall height: 2.2 m Lift height: 4.7 m Load capacity: 3,500 kg Solid rubber tires, 95% Hydraulic sideshift Fork length: 115 cm Includes charger Both drive motors and the rear axle have already been overhauled on the forklift, and the battery has also been replaced! Forklift is immediately available! Forklift is ready for immediate use! Forklift can be inspected and test-driven at our premises! Lrsdpjxzr E Eofx Aphot Transport can be organized on request!

Condition: new, Ostas Profile Ring Bending Machine OPK 125 Technical Specifications: • Tool holder, shaft: 120 mm • Tool: 390 mm • Working speed: 2-7.5 m/min Lodpfx Ajxrd Rnsphert • Motor: 15 kW • Dimensions (L-W-H): 2000 x 1700 x 1950 mm • Weight: 4850 kg • 3 rollers are driven separately by a hydraulic motor and planetary gearbox • Hardened standard rolls • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Hydraulic side supports • Digital displays (2 pcs.) • In accordance with CE standard

Condition: used, Year of construction: 2002, fuel type: gas, Number of working hours 3184 h weight max. 8 t Lrjdowx R T Eepfx Aphet weight of the machine ca. 13400 kg

Condition: good (used), functionality: fully functional, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, shaft diameter: 100 mm, roller diameter: 300 mm, bending radius (max.): 500 mm, bending radius (min.): 500 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 5 rpm, pipe diameter (max.): 115 mm, tube wall thickness (max.): 3 mm, overall weight: 2,700 kg, total length: 150 mm, total width: 150 mm, total height: 150 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, operating pressure: 200 bar, year of last overhaul: 2026, Equipment: documentation/manual, emergency stop, hardened rollers, Profile bending machine model PP100 Lrjdpfx Apjywhamohjt Output shafts 100 mm fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed

Condition: used, Year of construction: 2008, fuel type: gas, weight max. in kg 5.500 kg Number of working hours 2739 h Ledsww Ngnopfx Aphjrt weight of the machine ca. 8,59 t

Condition: new, empty load weight: 650 kg, maximum load weight: 2,050 kg, overall weight: 2,700 kg, loading space length: 4,600 mm, loading space width: 1,940 mm, tire size: 195/55r10c, This tilting car trailer, designed as a platform trailer, makes loading cars easy. The trailer’s loading platform is tilted using a manual hydraulic system, providing a firm and secure base. The license plate holder is folded down, and the lights are moved to the side, eliminating the need to handle heavy ramps. After a car has been loaded, the loading platform is lowered again by opening the hydraulic valve. This car transporter impresses not only with its appearance but also with its high-quality construction, stability, and ease of use. The extensive features of the car transport trailer make the offer even more attractive. As standard, the car trailer includes a manual hydraulic system, two hydraulic supports for a stable platform, an aluminum floor, a rope winch with a holder that is adjustable in width, wheel stops, lashing eyes, a spare wheel with a holder under the loading platform, an automatic support wheel, a very stable welded frame, and a V-shaped drawbar, all hot-dip galvanized. Technical details can be found below. We also offer accessories for the car trailer, such as a tarpaulin and frame, car lashing straps, lashing straps, shock absorbers, TÜV certification for 100 km/h, toolboxes, and anti-theft devices. ----- You can find all our cost-effective offers on our website. Delivery is possible throughout Germany (except for islands)! Please feel free to ask us about the prices. ----- PKW-Anhänger-Center Ahrens, Moordeicher Landstraße 37, 28816 Stuhr near Bremen, Tel: 0, Fax: Collection times: Monday - Friday – Uhr Ljdpfjfidl Sox Aphort Collection is not possible on Saturdays!

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ledpfx Aex Di Rqephort