LPG Forklifts

Hyster H2.50 XL

Condition: used, Year of construction: 1989, operating hours: 1,061 h, Type of fuel: Diesel Colour: Yellow Empty weight: 3.840 kg Dimensions (LxBxH): 260 x 113 x 215 cm Lifting capacity: 2.500 kg Lift height: 325 cm Fork dimensions: 1.290 x 1.020 mm - Year: 1989 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: A177B3548K - Operating hours: 1061 - Lifting capacity: 2500kg - Lifting height: 3250mm - Overhead clearance: 2130mm - Free lift: 0mm - Fork length: 1290mm - Maximum fork width: 1020mm - Minimum fork width: 270mm - Number of wheels: 4 Wheels - Attachment: 3rd valve to fork carriage - Options: Half cabin - Mast: Duplex - Drive: Diesel - Motor brand: Isuzu - Transport dimensions: 2600mm x 1130mm x 2150mm (l x w x h) - Transport weight [kg]: 3840kg Pjdpfjyu Ip Uox Ai Rspt - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: like new (used), Year of construction: 2008, operating hours: 8,348 h, functionality: fully functional, machine/vehicle number: 2887, pressure: 8.5 bar, power: 2.276 kW (3.09 HP), operating pressure: 8 bar, temperature: 176 °C, total height: 2,950 mm, total length: 5,100 mm, nominal heat output: 2.276 kW (3.09 HP), total width: 2,400 mm, empty load weight: 6,500 kg, Equipment: CE marking, ATTSU RL3000/8 steam generator on sale. The steam generator is in very good conditions and has a low mileage of 8348 operating hours. The generator was used in a factory of pickled vegetables which stopped activity. The boiler has been kept preserved ever since. The boiler includes a fuel oil burner (optional), but can be fired with gas. An inspection on the boiler was performed in June 2025 by a boiler specialist which include thickness measurements and pressure test. The test results were favourable. Boiler Datasheet Manufacturer: ATTSU Model: RL 3000/8 (tube fired) Burner: Fuel oil Podpfswxd Atjx Ai Rjpt Serial Number: 2887 Steam Production: 3000 kg/h of saturated steam Rated Pressure: 8.3 bar Test Pressure: 12.5 bar Volume: 3125 liters Year of Manufacture: 2008

Condition: ready for operation (used), Used Machine Injection Moulding Machine Manufacturer: Krauss Maffei KM 80 C1 Ppodpfsu Ti Srsx Ai Rst Year of manufacture: 2000 Only 1 machine left in stock No delivery time, immediately available Inspection possible by appointment The machine is no longer powered / No coolant connection The machine is professionally stored Technical Data: Clamping force (kN): 800 kN Platen size (mm): 610×610 Tie bar spacing (mm): Daylight opening (mm): 250 Max. (mould) open daylight (mm): 750 Control unit: MC4 Screen text language: German (cannot be changed to other languages) Injection unit: Screw diameter (mm): 45 Injection pressure (bar): 1878 Shot volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil tank capacity (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available on request.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Industrial steam boiler Brand Loos Bosch Group Model U-ND 800 Serial number 109582 Year of construction 10/2011 Total capacity: 1108 liters Steam output 800 kg per hour with Weishaupt GmbH burner Burner type WM - L10/3-A Year of construction 2011 Minimum: 250 kW Maximum: 800 kW Steam boiler dimensions: 2500 mm x 1600 mm x 1900 mm, Storage tank Achenbach GmbH Capacity: 800 liters Dimensions: 1600 mm x 850 mm x 2600 mm Control cabinet Ppodpfsv I E Tgsx Ai Rjt Dimensions: 1000 mm x 180 mm x 750 mm. Burner after major renovation in 2024.

Condition: excellent (used), Year of construction: 2015, I sell the 2-head UV-drying tunnel Superfici Essiccatoio UV Model: Poliedra S.Cure 1650x2 + TT1 3500. Year 2015. Available immediately. Repairs needed: Display, Energy power units for each two UV-units Ppsdpsffk Etsfx Ai Ret

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1 used steam boiler ----- Manufacturer: LOOS Gunzenhausen Pedpfx Asxtngpoi Ropt Type: U-HD 1250 Heating surface approx.: 20 m² Max. boiler output: 1,250 kg/h Operating overpressure: 10.0 bar Increased test pressure: 18.5 bar Water content at NW approx.: 993 l Total water content approx.: 1,365 l Year of manufacture: 2008 CE marking: 0036 Equipped with Weishaupt gas burner G7/1-D, ZMD, 300-1,750 kW, 15-500 mbar, gas control section, control cabinet with touch panel, feed water pump, ECO, and the existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, 1 used steam boiler ----- - with corrugated flame tube and dished ends - Manufacturer: STANDARD Heating surface approx.: 240 sqm Capacity: 13.4 t/h Previous operating overpressure: 14.0 bar Test overpressure: 18.2 bar Water content approx.: 18,160 l Ppedpfoxtndnox Ai Rst Year of manufacture: 1988 Equipped with Saacke natural gas burner type DG 80, gas control line, control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: ready for operation (used), Year of construction: 2013, An old steam boiler Loos including a relatively new Weishaupt burner is available. 1) Steam boiler Loos UL-S, year of manufacture: 1991, steam output: 6000kg/h, max. operating overpressure: 13bar, boiler volume: 6380l. 2) Weishaupt burner G50/2-A, year of manufacture: 2013, output range: 600kW-5400kW, connection pressure range: 15mbar-500mbar. Documentation available. An on-site inspection is possible. Psdpfjx Uq T Rjx Ai Ropt

Condition: excellent (used), Year of construction: 2002, 1 used steam boiler ----- - frame-mounted - - with integrated economiser - Manufacturer: LOOS, Gunzenhausen Model: UL-S 4000 Heating surface approx.: 80 m² Output: 4,000 kg/h Permissible operating pressure: 16 bar Increased test pressure: 30.4 bar Water content at nominal level approx.: 5,930 l Total water content approx.: 8,020 l Year of manufacture: 2002 Ppjdpjy H Iruefx Ai Rot Equipped with Weishaupt combination burner (gas/oil), RGL 10/1-D, version ZMD, 500 – 4,100 kW, gas control line, separate control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: used, Year of construction: 2004, operating hours: 90,627 h, functionality: fully functional, clamping force: 180 kN, screw diameter: 18 mm, For sale is an injection molding machine of the brand Arburg and the type 170U 180-70 The machine is fully functional and ready for immediate use Technical data Year of construction: 2004 Operating hours: 90,627 h Cylinder Ø 18 mm Clamping force: 180 kN Valve gate: Pneumatic Internal pressure transducer On request, transportation and loading can be organized at extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Ppsdju Hqg Tjpfx Ai Ret PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website