Power Generator

HIMOINSA HPW-210 T5

Condition: new, Year of construction: 2025, Driving extra long poles, solar system poles and large diameter poles With the new SolarPro post driver from Rhino, EuroGate International is launching a completely new way of driving posts on the market. This professional attachment, suitable for the most common earth-moving machines, drives a pile with a maximum length of 450 cm into the ground with about 1000 strokes per minute. With a force of up to 1,085 joules, posts up to a maximum diameter of 38 cm are no problem for this powerhouse. Piles are driven vertically into the ground at great speed. These machines are very suitable for solar installations, fencing and road construction. The possibilities are endless. A tough project, even in difficult terrain? No problem for the Rhino SolarPro. Designed to accelerate the installation of solar farms. The Rhino SolarPro is ‘X and Y axis adjustable’ to ensure accurate, fast and perpendicular driven piles for solar parks and fencing, among other things, regardless of the soil conditions of the construction site or the terrain. This professional construction attachment for construction equipment is designed and built in the USA with the highest quality materials. The SolarPro has a CE certificate and is built according to the standards for the European market. Features and benefits Suitable for posts up to 38 cm in diameter with a maximum length of 450 cm. The hammer and guide hold the post in place for efficient hammering of the post. Uses the existing hydraulic drive of the earth-moving machine and the use of the attachment function eliminates the need for an expensive self-propelled pile driver. This allows you to complete your project on time and within budget. The Rhino SolarPro is equipped with a universal mounting plate for the most common excavators and earth-moving machines. Equipped with modern, Furukawa FX hydraulic hammer Designed for efficient pile driving, reliable hammer with a long service life. Powerful 800 ft. lbs. (1,085 Joules) impact energy per stroke (approximately 1,000 strokes/min.) Features a new and improved piston (larger diameter and longer stroke) increases speed – provides more impact energy.Using the monobloc design, this machine requires less maintenance with only two moving parts. Gjdpfjia N Eqex Af Dobh Pole pull function included The SolarPro pile driver offers an integrated pile driver with vibration aid for the toughest applications. By using this function you can remove a knocked-out post in no time at all.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, total length: 12,200 mm, total height: 2,890 mm, total width: 2,440 mm, power: 1.65 kW (2.24 HP), fuel: diesel, Equipment: type plate available, These are three emergency generators, each with a 2000 kVA capacity and 1600 kW continuous output at a cos phi of 0.8. Voltage: 10 kV, frequency: 50 Hz. A viewing is possible in 49733 Haren. Engine manufacturer: Perkins Generator manufacturer: Stamfort Design: 40" soundproof container with a sound level of 85 dB(A). Dimensions: 12,200 x 2,438 x 2,890 mm (L x W x H) Weight: approx. 35,000 kg The data sheet (German and English) is attached. Gbedpfx Asqqhuysf Doh The container also contains a 2,000 L tank for the initial diesel supply. The generators are regularly tested under load.

Condition: new, Year of construction: 2022, A brand new generating set, consisting of two generators placed in one housing, based on Scania engines. Possibility of synchronization with other units or aggregates, and optionally also with the network. Maximum Power E.S.P. [kVA] / [kW] 902.0 / 722.0, Gbjdpfx Afsmrqi Eo Djh Rated power P.R.P. [kVA] / [kW] 820.0 / 656.0, Driver type: ComAp InteliGen 500, Easy-to-use, intuitive graphical interface.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, ANAK – MATIC 7 CNC – 3-Axis machining center | HEIDENHAIN TNC 426 | 1000 x 500 x 505 mm. Gbsdpokuz I Nefx Af Deh Compact and reliable 3-axis CNC machining center, ideal for precise milling operations. Equipped with high-speed spindle and HEIDENHAIN control. 🛠 Key specifications: • X-axis travel: 1000 mm • Y-axis travel: 500 mm • Z-axis travel: 505 mm • Main spindle: 7.5 kW – 6000 rpm • CNC control: HEIDENHAIN TNC 426 • Number of axes: 3 • Table size: 1150 x 475 mm • Machine weight: 5000 kg ✅ Perfect for: • Small to medium part production. • Job shops and subcontract machining. • Tooling, moldmaking, general precision parts. 📌 Ready for immediate delivery. Stable, accurate, and proven – powered by HEIDENHAIN.

Condition: new, Year of construction: 2024, functionality: fully functional, Konica Minolta’s AccurioShine 3600 with iFoil One option allows printers to meet the demanding needs of today’s printing requirements. The device enables in-house spot UV varnishing, from prototyping to full production, without the need for screens, plates or dies. The AccurioShine 3600 with iFoil One utilizes ground-breaking technology for adding 2D and 3D gloss effects, as well as 3D embossed foiling at a reasonable cost without the complicated steps of conventional systems, allowing printers a range of high-impact finishing effects never seen before – such as personalized embossed foil, while raising profit margins. Gbedpfx Aowmnz Asf Dsh This machine is a newer generation of MGI JETVARNISH 3D ONE with iFoil Please find all technical specifications in brochure attached. For more info - please contact directly. * Professional demonstration and loading is included in the price. Location - Vilnius, Lithuania. Very good opportunity if you are looking for such a machine! Also available MGI JETVARNISH 3DS with foil unit. It has possibility to print on sheet up to 120 cm length.

Condition: ready for operation (used), Year of construction: 1996, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 83 mm, Weiler Voest Alpine E50 lathe Comes with 3-jaw chuck and 6 multifix tool holders Gjdpon Hp T Asfx Af Debh

Year of construction: 2012, condition: good (used), 60t turning roll, roller bed with polyurethane wheels. turning speed: 60-1.200 mm/min workpiece diameter: 600-7.500 mm Gbedpfx Afjfvhp Hs Doh availible also for renting

Condition: good (used), Year of construction: 2009, For sale: Chiron FZ 08W Magnum High Speed, a high-speed vertical CNC machining center, manufactured in 2009 and equipped with a Siemens 840D control. The machine is located in Armilla, Spain, and is in perfect working condition, ideal for precision machining and series production. Main Features: Brand / Model: Chiron FZ 08W Magnum High Speed Year of Manufacture: 2009 CNC Control: Siemens 840D (PCU 50 / NCU 572.5, 6 axes, 1 channel) Travel Distances: X-axis: 450 mm Y-axis: 270 mm Z-axis: 310 mm Spindle Speed: Up to 15,000 rpm Tool Holder: HSK-A 40 DIN 69893 Spindle Power: 7.2 kW (25% duty cycle) / 2.2 kW (100% duty cycle) Tool Magazine: 24 positions with automatic tool changer Tool Change Time (chip-to-chip): ~1.9 s Cooling System: Internal high-pressure cooling (up to 150 bar) High-pressure pump with dual-switchable 60 µm filter Coolant Filtration System: Automatic continuous paper filter (50 µm) 500-liter coolant tank Chip Conveyor: Chain conveyor with 100-liter chip container Automatic Loading Doors Table Size: 2x660x350 mm Maximum Table Load: 100 kg per side Rapid Traverse Speed: Up to 75 m/min (X, Y, Z) Axis Acceleration: X-axis: 1 g Y-axis: 1.5 g Z-axis: 2 g Additional Features: High-speed package (increased acceleration and faster tool changes) 0/180° Work Area Switching System with intermediate partition 3D Touch Probe Renishaw TS 27R Three-color signal light on the splash guard 230V power socket on the control panel Connection for portable handwheel ("Mini Handwheel") Integrated electrical cabinet cooling Additional Spare Parts Included: This machine comes with a spare parts package from another disassembled Chiron FZ 08W, making maintenance and repairs easier. The package includes: Gbodpfx Aov R Hlief Deh Complete Peiseler 180° table Complete tool changer system with motor Spindle head (without motor) Operator panel keyboards Doors Various electrical components Power supply for servo amplifiers 2 servo amplifiers Chip conveyor 2 spare motors Condition & Delivery: Machine is fully operational and ready for production. Available for testing at our facility. Regular maintenance performed. Video of the machine in operation available upon request. Location & Shipping: Location: Armilla, Spain Shipping and commissioning can be arranged upon agreement. For more information, contact us via phone or email. We are available to answer any questions and provide additional technical details.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 103979, We offer for sale CNC vertical lathe EMAG, VL5i F., year of production 2016, used, preserved, functional. Still in production. Must see. EXW price incl. loading. Gbodpfsuyh Tdjx Af Dsh More information on request.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 200.12.010.13, year of last overhaul: 2024, Machine can be collected from April. Machine is still in operation and can be inspected during operation. Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized positioning-controlled pressure beam chain feed with 12m/min feed speed roller support plate d=760mm 2 motorized joint trimming unit Edge feed for roll and strip material 0.4 - 5mm 2 replacement gluing units for EVA 1 replacement gluing unit for PU Motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit 2 motorized multifunctional units for radius, flush and chamfer trimming Gedpfstvfihjx Af Dobh Corner processing unit Radius scraper 2 motorized polishing unit (buffing) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit