Tractors (haulers)

Fendt 936 Vario Gen7 Profi+ Setting2

Condition: used, Year of construction: 2024,

Condition: as good as new (ex-display), Year of construction: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, for underground storage of heating oil and diesel fuel, 1 dome (2 domes also possible as an alternative). Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg In addition, we can equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detectors - Dome shaft with shaft cover in a walkable or drive-over design - Partition walls (as a multi-chamber tank) - Internal coatings (e.g., 2K epoxy resin), partial or full linings - Content and level measuring devices, as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Fuel dispensers for diesel, biodiesel and gasoline – with complete tank data recording on request - External tank insulation with PU foam The tank is cleaned internally, and the external coating has been fully refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us for details. Delivery time upon agreement! We also have the following sizes of these tanks in stock: Fedei Enxdspfx Ahkepk - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: used, Year of construction: 2024, front tire size: 600/65 R34 151D MI -67 12 DW18, rear tire size: 710/70 R42 173D MI -55 10 DW23, Equipment: compressed air brake, Infotainment package 4x camera connections 4 USB connections Front weight 1,250 kg / rear wheel weights 2x 600 kg RTK NovAtel lane guidance Section Control / Fodpfxerxtcgs Ahkjpk

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 Fsdpfx Ahoynbmmokjpk • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, PRICE: 1800 EUR The machine is characterized by simple operation, easy cleaning, and maintenance as well as stability during operation It is suitable for factories dealing with meat processing, restaurants, kitchens, and other catering facilities Dimensions: 850× 450× 850mm Electrical power: 0.12kW Fedpfx Ahjikvrdekopk Volume: 60 liter Delivery time: immediately after the advance payment (100%)

Condition: like new (used), Year of construction: 2026, power: 286 kW (388.85 HP), fuel type: diesel, rotational speed (min.): 1,900 rpm, Technical Data for Deutz Engine Type BF6M1015C General Specifications Number of Cylinders: 6 Bore/Stroke: 132 mm / 145 mm Displacement: 11.91 liters Compression Ratio: 16.5 Max. Rated Speed: 2100 rpm Mean Piston Speed: 10.15 m/s Power Ratings for Construction Equipment Engines Group I: Fedpoyzaayefx Ahkepk Power: 300 kW Speed: 1900 rpm Mean Effective Pressure: 14.4 bar Group III: Power: 273 kW Speed: 1900 rpm Mean Effective Pressure: 13.1 bar Additional Parameters Max. Torque: 1980 Nm At Speed: 1200 rpm Minimum Idle Speed: 550 rpm Weight (to DIN 70020, Part 7A): 850 kg This summarized technical data provides a comprehensive overview of the BF6M1015C engine’s specifications and performance ratings.

Condition: used, Year of construction: 2023, 3 dosing rollers Scraper floor gearbox protection 4 scraper floor chains Pick-up feeler roller / in the middle of the wagon Loadsensing control cable BG2 Loadsensing BG4 Working lights / 3 x LED Swing-out blade frame on the side Access door to the loading area ISO BUS / operating system Fsdpst Dxm Uefx Ahkspk

Year of construction: 2001, condition: good (used), Item: A-01537- mixer tank 4000L Rectangular mixer tank with insulation and connection for heating/cooling tank, Capacity 4.000 L, Fsdpfx Ahjh A Hb Rjkjpk Stainless Steel quality AISI316, Insulated, man-way at top, double jacket press 3 bar, working temperature 95 C, agitator inside from top. Brand Food-Tech Sweden 2001. 2 pieces identical!

Condition: ready for operation (used), Year of construction: 1984, spindle speed (max.): 800 rpm, spindle motor power: 16,000 W, total height: 1,800 mm, overall weight: 7,300 kg, number of axes: 2, This Poreba TPK 90/5M horizontal turning machine was manufactured in 1984. It features a swing over bed of 930 mm, a spindle bore diameter of 95 mm, and can handle workpiece weights up to 9,000 kg with two steady rests. It includes a tailstock, coolant pump, chuck guard, and tool holder. Consider the opportunity to buy this Poreba TPK 90/5M horizontal turning machine. Contact us for more information about this machine. Additional equipment • Standard equipment includes Coolant pump, Chuck guard, Tool holder • Optional equipment available: 3- or 4-jaw chuck, various diameters and versions • Digital Read Out (DRO) for 2 axes, incl. display, installation, and calibration • Steady rest 40–400 mm with rollers • Steady rest 400–600 mm with rollers • MULTIFIX quick-change tool post Machine Benefits Technical Machine Benefits Fpjdpsyaqinsfx Ahkek • Distance between centers / turning length: 5000 mm • Swing in gap: 1200 mm • Maximum workpiece weight between centers: 6000 kg • Maximum workpiece weight between centers + 1 steady rest: 7500 kg • Maximum workpiece weight between centers + 2 steady rests: 9000 kg • Number of feeds: 80 • Feed range (mm/rev): - longitudinal: 0. 1 – 12. 8, - cross: 0. 05 – 6. 4 Extra Information Machine completly overhauled. Comes with 12 months warranty. Dimensions Machine Depth 7500 mm

Condition: used, Year of construction: 2005, Travel: X-1500 mm, Y-1300 mm, Z-600 mm Control: iTNC530 Spindle mount: HSK-63A Spindle speed: 15.000 U/min Fedpfx Aezfwzyehkspk table size: 1500 x 1000 mm max. table load: 2.500 kg Distance between table and spindle: 200-800 mm tool magazine: 30 fold Tool measurement: BLUM Laser chip conveyor: IKZ machine weight: approx. 14,000 kg Dimensions: L: 5000 x B: 2400 x H: 2999 mm