Fully automatic sawing machine Ergonomic 310.250 ACNC-6200
Manufacturer Bomar
Year of manufacture 2012
Dimensions of the complete sawing line → L=16200 mm W=4385 mm H=1620 mm
The saw is fully enclosed, providing maximum protection for the operator and a clean machine environment.
A laser system is also part of the safety concept, which stops the machine immediately if the safety area is entered.
Sawing unit:
- Hydraulic clamping unit
- Infinitely variable saw band speed
- Infinitely adjusta...
Manual metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°)
Wdt8wnw
Basic equipment:
- Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre)
- band tension indicator
- hydraulic control of the cast iron saw arm
- hydraulic clamping of the workpiece via short stroke cylinder
- Height limitation of t...
Manual metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°)
Basic equipment:
- Large rotating support table without wear! (The cutting channel of the saw band rotates with the mitre)
- Belt tension indicator
- hydraulic control of the cast iron saw arm
- hydraulic clamping of the workpiece via short stroke cylinder
- height limitation of the saw fr...
Semi-automatic metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°)
Basic equipment:
- Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre)
- band tension indicator
- hydraulic control of the cast iron saw arm
- hydraulic clamping of the workpiece via short stroke cylinder
- Height limitation of t...
Semi-automatic metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°)
Basic equipment:
- Large rotating support table without wear! (The cutting channel of the saw band rotates with the mitre)
- Belt tension indicator
- hydraulic control of the cast iron saw arm
- hydraulic clamping of the workpiece via short stroke cylinder
- height limitation of th...
Fully automatic band saw machine
make Bomar
Hhgaxuhtu
type STG 230 GANC Capacity:
90 degrees
round 230 mm
square 230x230mm
rectangle 280×200 mm
45 degrees
round 210 mm
Square 200×200 mm
rectangle 200×200 mm
30 degrees
round 130 mm
square 80×80 mm
rectangle 130×80 mm
Tire size 2720 x 27 x 0.9 mm
Adjustable cutting speed or 35-70 m/min
Power 1.1 kW
Dimensions 1350 x 1210 x 1360 mm
Weight approx. 440 kg
Semi-automatic metal band saw with high
cutting accuracy.
With this machine are 90° cuts, as well as
Cjatzslkmq
miter cuts, right and left up to 30° are
steplessly possible. (swivel range 60°)
Technical data:
Cutting area 610 x 440 mm at 90°.
drive motor with 3 kW- 400V-50 Hz
saw band 5200 x 34 x 1,1 mm
cutting speed 20-120 m/min
weight 1003 kg
Standard version:
- Hydr. cutting pressure regulation 2-fold
- Hydr. material tension via long stroke cylinder
- Stepless belt speed via frequency conv...
diameter of brush 250 mm
width of brush 55,0 mm
turning speed range 1400 / 2800 U/min
workpiece dia. max. 90 x 90 mm
voltage 400 Volt
total power requirement 2,2 kW
weight of the machine ca. 85,0 kg
dimensions of the machine ca. 510 x 480 x 1230 mm
Req2t
Furnishing:
- Deburring of individual pieces and small series
- deburring of stretched round, rectangular and square tubes,
as well as solid rods
- Optional: deburring of straight sheet metal edges
- Simple high speed radial brush rotation
-...
length in total: mm
band width: 600 mm
conveying height:
voltage: 460 / 60 V / Hz
total power requirement: 3,5 kW
weight of the machine approx.: 2300 kg
dimension machine xH: ca. 9,0 x 1,4 x 3,0 m
Hinged belt conveyor, unuset
With coolant tank incl. pump capacity 250 l/min. adequate for a conveying height of 25m
Chip insertion length 3000mm (attachment with sheet metal tray with rubber coating 3000 x 1100mm)
Insertion length total 5000mm
The chip conveyor has 4x swivel wheels underneath and can...
Offer 22628
Technical data:
Chfulsw8xk
- Saw blade dimension 6100 x 41 x 1,3 mm
- cutting speed adjustable in steps from 20 to 120 m/min
- Hydr. lifting + lowering of the saw frame
- Hydr. vice
- Cutting pressure regulation
- Swivel frame for miter cuts with cutting range
- at 90° round 460 mm
- square 460 x 460 mm
- flat 610 x 450 mm
- at 45° round 420 mm
- flat 440 x 180 mm
- upright 410 x 460 mm
- at 60° round 310 mm
- coolant unit
- separate control panel
- drive 400 V / 3...
BSander 150.200 machine is a machine polisher to grind tube front and profile ends, edges grinding and cylindrical grinding on the upper surface of the plant.
Band size 150 x 2000 mm
Wgtkowa
Belt speed 29 m/s.
4,0 kW / / 3 x 400 V / / 50 Hz dimensions L x W x H 700 x 530 x 1130 mm
Weight 90 kg
Price on request
Delivery from stock:
Cg0mnfve
Automatic bandsaw with NC control. The start of the whole work cycle is completed after the length and number of pieces have been programmed. The required material length is set very easily on the moveable control panel. The biggest advantage of this machine is the possibility to program a various number of pieces of the processed material, with various lengths, without further control of the machine. The maximum length of an individual feed is 500 mm. A simple dia...
length in total: mm
band width: 600 mm
conveying height: 1800
voltage: 460 / 60 V / Hz
total power requirement: 3,5 kW
weight of the machine approx.: 2300 kg
dimension machine xH: ca. 9,0 x 1,4 x 3,0 m
Slat-band chain conveyor
With coolant tank incl. pump output 250 l/min. sufficient for a conveying height of 25m.
Very good little used condition.
Chip intake length 3000mm (attachment with sheet metal tray with rubber coating 3000 x 1100mm)
Total infeed length 5000mm
Exv0w7oyy
The chip conveyor h...
max. drilling diameter: 35 mm
drilling stroke: 300 mm
travel range Y-axis: 300 mm
travel range X-axis: 6000 mm
drive X-axis: frequency converter
Y-axis NC controlled
4-fold tool changer
Pneumatic clamping unit up to 250 mm
Pdtnz
USB connection
Micronizer
Clamping pressure regulation up to max. 150 mm
Manual miter band saw with automatic
Editing function for angles up to 45 ° left and right up to 30 °
Cutting zone ø 230 mm
Power 1,1 / 1,5 kW
Blade 2.720 x 27 x 0, 9 mm
Bandgeschindigkeit 40/80 m / min
Connection 400V
7pebk7bxn
incl.
-automatic function with quick approach to the work piece with handle switch
-Ergonomic operation
-powered chip brush
-Monitoring of the saw band tension
-Vice quick adjustment
-large turntable with integrated miter scale
-Coolant system with chip tray
BSander 75.200 machine is a machine polisher to grind tube front and profile ends, edges grinding and cylindrical grinding on the upper surface of the plant.
Belt dimensions 2000 x 75 mm
Belt speed 29 m/s
Power of 3 kW dimensions L x W x H 700 x 490 x 1130 mm
Yrxz78
Weight 72 kg
Price on request!
The machine individual 520.360 DGH is a semi-automatic double mitre band saw in two-column design. The mitre range of the saw extends from 30° left continuously to 30° right. The model individual 520.360 DGH has a hydraulic full stroke vice and an easy to use control in plain text display.
Standard equipment details
- Double mitre 30° - 45° - 90° - 45° - 30°
- Hydraulic full stroke vice
- Saw frame mounted on preloaded linear guides
- Infinitely variable saw band speed
- Infinitely adjustable sa...
semi-automatic bandsaw with double-sided miter R/L 60°
incl. hydraulic band tensioning display
Bdsuvltmzf
Minimal quantity lubrication can be retrofitted
Cutting capacity
90° square, approximately 280 mm / flat 410 x 280 mm. 280 mm
45° round R 280 mm / flat 310 x 150 mm square. 270 mm
45° L round flat 330 x 100 mm/280 mm / square. 280 mm
60° R round flat 205 x 100 mm, 210 mm / square. 190 mm
60° L round 220 mm / flat 225 x 100 mm square. 210 mm material circulation 756 mm
Blade dimension 3800 x...
The workline 510.350 DGH is a semi-automatic double mitre bandsaw in swivel frame design.
Equipment details:
- Double mitre 30° - 45° - 90° - 45° - 30°.
- Hydraulic full stroke vice
- Infinitely variable saw band speed
- Infinitely adjustable saw feed and cutting pressure
- Automatic cutting pressure regulation
- Precision carbide saw band guides
- Powerful drive motor with 3kW
- Simple, easy to understand control system
- Control panel in ergonomic position
- Large dimensioned hydraulic unit
B0...
The workline 410.280 DG is a manual double mitre band saw in swivel frame design. The mitre range of the saw extends from 30° left continuously to 30° right. This saw has an easy-to-operate pull-down vice with quick-move system and quick-clamping device.
Equipment details:
- Double mitre 30° - 45° - 90° - 45° - 30°.
- Large, clearly visible mitre scale
- Pull-down vice with Quick-Move-System
- Infinitely variable saw blade speed
- Infinitely adjustable saw feed
B0wng0rirb
- Precision carbide saw...
manual band saw /self lowering with mitre on both sides
Cutting capacity
Nfayz
90° round 230 mm / flat 275 x 230 mm / squared 230 mm
45° R round 195 mm / flat 190 x 190 mm / squared 190 mm
45° L round 170 mm / flat 185 x 150 mm / squared 150 mm
60° R round 120 mm / flat 120 x 85 mm / squared 85 mm
Material support height 760mm
saw blade dimension 2720x27x0,9mm
Cutting speed 40/80 m/min.
drive power 1,1/1,5 kW//400V//50 Hz
Smallest diameter 5 mm
Dimensions L x W x H 1600 x 1150 x 1477 mm
Weight 3...
I sell the double mitre saw Rapid DGS, year 1977.
Tilting heads
Drilling front heads on each side included
Very good condition.
Nnbvx
Available immediately.
cutting width 375 mm
Cikdm3d72i
Cutting height 150 mm
dimensions of saw-blade 500 x 30 mm
Motor output 2 x 3 kW
Cutting length 5100 mm
speeds 2800 U/min
air pressure 6 bar
weight of the machine ca. 700 kg
dimensions of the machine ca. 6100 x 1450 x 1450 mm
* Profile support plate made of steel
* Stable cast construction of the saw unit
* Large cutting range, 2 profiles can be cut at the same time
* Easy adjustment of the moving unit with roller guides
* Double storage of the swivel device
* S...
Second hand machine
Year of manufacture 1994
with the 400 mm saw blade the machine is especially suitable for cutting large aluminum, plastic and wood profiles
standard hydropneumatic feed cylinder
both sawing units can be turned and tilted up to 45°. Thereby outside and inside dimension reading possible
aggregates can be locked at 90° as well as at 22,5° ud 45° left and right
The turntables are made of sturdy cast iron. Therefore highest precision in cutting
hardened and ground sliding g...
pressure capacity max. 7,5 t
I-beam section - upend 100 mm
stroke 0 - 70 mm
dayligth 100 mm
work height max. 915 mm
table surface area 700 x 400 mm
engine output 0,75 kW
weight 180 kg
range L-W-H 700 x 400 x 960 mm
Furnishing:
B2xcrryxmt
- hydraulic horizontal bending machine
- large countertop
- hydro-mechanical stroke limitation
- Infinitely variable stroke adjustment from the punch
- Insert tools
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp
-Stroke: 100 mm
-Piston: Ø 40 mm
-Piston rod: Ø 16 mm
-Total length: 335 mm
-Total length extended: 435 mm
-End position cushioning: adjustable on both sides
2quzoe
-Number: 2x available
-Price: per piece
-Dimensions: 48/335 mm
-Weight: 2.75 kg
Cutting dimension max. 5000 mm
saw blade D = 500 mm
Qrgtr
pneu. plunge
pneu.swivel
pneu. clamping vertical/horizontal
motorized length adjustment
SPS memory control
machine available at short notice
Nominal power 125 kVA
electrode force 2.000 daN at 6 bar
upper units adjustable (1m)
works / control overhauled
documents for the control available
shown electrode holders / tools exclusive!!!
Sale without any warranty and
warranty. No return.
All information without guarantee, subject to prior sale. Free loading.
You will receive an invoice with
Bohtfdfu
VAT. Delivery only against prepayment.
capacity 90 degrees: round 350 mm
capacity 90 degrees: square 330 mm
450x320
saw band length 4250x34x1,1 mm
band speed 40 + 80 m/min
table height 845 mm
saw band width 34 mm
total power requirement 2,2 kW
weight of the machine ca. 0,985 t
Bh0nhd9lpc
dimensions of the machine ca. 1,4 x 2,0 x 2,2 m
Injector blasting cabinet/ Automatic blasting machine ISK802
Working area W= 1200mm depth= 880mm height= 745mm.
The height of the operator can be individually adjusted to the height of the worker by means of the screw-on foot frame.
The handy blasting cabin. The two-hinged folding door, relieved by gas pressure shock absorbers, offers a completely free front when open and thus enables the loading of heavy workpieces by means of a forklift truck or overhead crane.
Bys8hmbyiw
For questions regardi...
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp
-Stroke: 300 mm
-Piston: Ø 40 mm
-Piston rod: Ø 16 mm
-Total length: 522 mm
-Total length extended: 822 mm
-End position cushioning: adjustable on both sides
Ihqvnlkh
-Dimensions: 70/64/H522 mm
-Weight: 4.65 kg
Year: 2005
- technically efficient, ready to work – after full service
- dial diameter: 420 mm
- cutting length: 4000 mm
- pneumatic profile clamping
- electronic cutting length indicator
- pneumatic feed
- left head fixed, right movable
Hqpaxlmsg
Nimak 3 point welding machine
Type: 3BMP 20/125 DGS
Rated power: 125 kVA
electrode force: 1800 daN at 6 bar
3 welding cylinders, adjustable up to approx. 1 m
table height adjustable
condition:
- Control renewed, documents for control available
- welding current does not trigger
- Ground straps not yet attached, but present
Sale for own completion.
Before purchase: Inspection desired!
Bkhok3pg
Viewing is possible by appointment.
Sale without any guarantee and
warranty. No return.
All information...
capacity 90 degrees: round 500 mm
capacity 90 degrees: square 420 mm
600x400
saw band length 5320x34x1,1 mm
Benv3kgvil
band speed 15 - 100 m/min
table height 805 mm
total power requirement 3,0 kW
weight of the machine ca. 1,45 t
dimensions of the machine ca. 1,72 x 2,5 x 2,5 m
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp
-Stroke: 120 mm
-Piston: Ø 40 mm
-Piston rod: Ø 16 mm
-Total length: 345 mm
-Total length extended: 465 mm
-End position cushioning: adjustable on both sides
-Number: 1x available
-Price: per piece
9h2jlhwom
-Dimensions: 52/H345 mm
-Weight: 3 kg
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp
-Stroke: 350 mm
-Piston: Ø 40 mm
-Piston rod: Ø 16 mm
-Total length: 580 mm
-Total length extended: 930 mm
-End position cushioning: adjustable on both sides
-Number: 2x available
-Price: per piece
D8xzbndw8
-Dimensions: 52/H580 mm
-Weight: 4.3 kg
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp
-Stroke: 80 mm
-Piston: Ø 40 mm
-Piston rod: Ø 16 mm
-Total length: 305 mm
-Total length extended: 385 mm
-End position cushioning: adjustable on both sides
-Dimensions: 52/H305 mm
-Weight: 2.75 kg
9h2juy3cn
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp
-Stroke: 450 mm
-Piston: Ø 40 mm
-Piston rod: Ø 16 mm
-Total length: 675 mm
Tfzk03sr
-Total length extended: 1125 mm
-End position cushioning: adjustable on both sides
-Number: 1x available
-Price: per piece
-Dimensions: 52/H675 mm
-Weight: 4.8 kg
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp
-Festo: DGS-25-80-PPv
-Stroke: 80 mm
-Piston: Ø 25 mm
-Piston rod: Ø 10 mm
-End position cushioning: adjustable on both sides
-Price: per piece
-Number: 2 pieces
-Dimension: Ø 33/220 mm
-Weight: 0.65 kg
Bfnfgg7jik
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp
-Stroke: 140 mm
-Piston diameter: 25 mm
-Piston rod: 10 mm
Bgovugclw0
-Price: per piece
-Number: 2 pieces
-Dimensions: Ø 33/280 mm
-Weight: 0.8 kg/piece
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp
-Stroke: 50 mm
-Piston diameter: 20 mm
-Piston rod: Ø 8 mm
-Price: per piece
-Number: 2 pieces
Nslpz
-Dimension: Ø 27/188 mm
-Weight: 0.3 kg/piece
We make it easier for you to find: "bomar ergonomic 320.250 dgs"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
The Werktuigen Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Werktuigen. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.