Used Bomar ergonomic 320.250 dg for sale

semi-automatic band saw, mitre R/L

Call

6500 mm jaw feed Remaining piece flap strip deviation control Micronizer SLE 600 Extension version M330 3M Vertical roller VR-M Remaining piece remover DSTV interface H8mnl8f

Listing

Werdau

8009 km

Bomar ergonomic 340.278 DGH

new

Call

Semi-automatic metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°) Basic equipment: - Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre) - band tension indicator - hydraulic control of the cast iron saw arm - hydraulic clamping of the workpiece via short stroke cylinder - Height limitation of t...

Listing

Werdau

(dealership location)

8009 km

metal band saw horizontal

Bomar ergonomic 320.258 DGH

new

Call

Semi-automatic metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°) Basic equipment: - Large rotating support table without wear! (The cutting channel of the saw band rotates with the mitre) - Belt tension indicator - hydraulic control of the cast iron saw arm - hydraulic clamping of the workpiece via short stroke cylinder - height limitation of th...

Listing

Selm

7667 km

Fully automatic sawing line

Bomar Ergonomic 310.250 ACNC-6200

2012

ready for operation (used)

11,765 €

Call

Fully automatic sawing machine Ergonomic 310.250 ACNC-6200 Manufacturer Bomar Year of manufacture 2012 Dimensions of the complete sawing line → L=16200 mm W=4385 mm H=1620 mm The saw is fully enclosed, providing maximum protection for the operator and a clean machine environment. A laser system is also part of the safety concept, which stops the machine immediately if the safety area is entered. Sawing unit: - Hydraulic clamping unit - Infinitely variable saw band speed - Infinitely adjusta...

Discover more used machines

Band saws - horizontal - manually operated - cutting range 221-299mm

Bomar ergonomic 275.230 dg

Bomar ergonomic 290.250 anc

Bernardo bs 260 g

Bomar ergonomic 320.250 dgs

Double miter saws

Bomar ergonomic 275.230 dg

Fendt farmer 104 sa

Eisele

Eisele doppia magic

Listing

Oberrohrdorf

7986 km

EasyCut 275.230DG

Bomar EasyCut 275.230 DG

2022

new

Call

Operating mode: Manual Machine type: Horizontal band saw Cut: Miter cut Miter cutting range: - 45 ° - 60 ° Cgs2met0oy Drive: 0,7 / 1,1 kW, 3x400 V/ 50 Hz Saw band speed: 40 - 80 m/min. Saw band dimensions: 2 720 x 27 x 0,9 mm material loading height: 978 mm Length of the shortest residual piece: 20 mm Smallest saw diameter: Ø 5 mm

Listing

Aichwald

7963 km

Double - miter band saw

Bomar EasyCut 275.230 DG

2022

as good as new (ex-display)

3,513 €

Manual band saw with miter R/L 60°

Call

Manual miter band saw with automatic Editing function for angles up to 45 ° left and right up to 30 ° Cutting zone ø 230 mm Power 1,1 / 1,5 kW 7pebk7bxn Blade 2.720 x 27 x 0, 9 mm Bandgeschindigkeit 40/80 m / min Connection 400V incl. -automatic function with quick approach to the work piece with handle switch -Ergonomic operation -powered chip brush -Monitoring of the saw band tension -Vice quick adjustment -large turntable with integrated miter scale -Coolant system with chip tray

Listing

Werdau

8009 km

Bomar workline 410.280 DG

new

Call

semi-automatic bandsaw with double-sided miter R/L 60° incl. hydraulic band tensioning display Minimal quantity lubrication can be retrofitted Cutting capacity 90° square, approximately 280 mm / flat 410 x 280 mm. 280 mm 45° round R 280 mm / flat 310 x 150 mm square. 270 mm 45° L round flat 330 x 100 mm/280 mm / square. 280 mm 60° R round flat 205 x 100 mm, 210 mm / square. 190 mm 60° L round 220 mm / flat 225 x 100 mm square. 210 mm material circulation 756 mm Blade dimension 3800 x 0, 9x27mm ...

Listing

Werdau

8009 km

manual band saw

Bomar easycut 275.230 DG

new

Call

manual band saw /self lowering with mitre on both sides Cutting capacity 90° round 230 mm / flat 275 x 230 mm / squared 230 mm 45° R round 195 mm / flat 190 x 190 mm / squared 190 mm 45° L round 170 mm / flat 185 x 150 mm / squared 150 mm 60° R round 120 mm / flat 120 x 85 mm / squared 85 mm Material support height 760mm saw blade dimension 2720x27x0,9mm Nfayz Cutting speed 40/80 m/min. drive power 1,1/1,5 kW//400V//50 Hz Smallest diameter 5 mm Dimensions L x W x H 1600 x 1150 x 1477 mm Weight 3...

Listing

Deinze

(dealership location)

7478 km

Bandsaw machines

Bomar Workline 610.450 DGH

used

Call

Listing

Aichwald

7963 km

Semi-automatic miter band saw

BOMAR Transverse 610.440 DGH

2008

reconditioned (used)

8,500 €

Call

Semi-automatic metal band saw with high cutting accuracy. With this machine are 90° cuts, as well as miter cuts, right and left up to 30° are steplessly possible. (swivel range 60°) Technical data: Cutting area 610 x 440 mm at 90°. drive motor with 3 kW- 400V-50 Hz saw band 5200 x 34 x 1,1 mm cutting speed 20-120 m/min weight 1003 kg Standard version: Cjatzslkmq - Hydr. cutting pressure regulation 2-fold - Hydr. material tension via long stroke cylinder - Stepless belt speed via frequency conv...

Listing

Diksmuide

7432 km

Bandsaw

BOMAR 510.350 DGH

2017

ready for operation (used)

5,500 €

Semi-automatic band saw with miter

Call

Listing

Werdau

8009 km

Bomar individual 520.360 DGH

new

Call

The machine individual 520.360 DGH is a semi-automatic double mitre band saw in two-column design. The mitre range of the saw extends from 30° left continuously to 30° right. The model individual 520.360 DGH has a hydraulic full stroke vice and an easy to use control in plain text display. Standard equipment details - Double mitre 30° - 45° - 90° - 45° - 30° - Hydraulic full stroke vice - Saw frame mounted on preloaded linear guides - Infinitely variable saw band speed - Infinitely adjustable sa...

Listing

Werdau

8009 km

Metal band saw

Bomar workline 510.350 DGH

2021

new

Call

The workline 510.350 DGH is a semi-automatic double mitre bandsaw in swivel frame design. Equipment details: - Double mitre 30° - 45° - 90° - 45° - 30°. - Hydraulic full stroke vice - Infinitely variable saw band speed - Infinitely adjustable saw feed and cutting pressure - Automatic cutting pressure regulation - Precision carbide saw band guides - Powerful drive motor with 3kW B088mezabu - Simple, easy to understand control system - Control panel in ergonomic position - Large dimensioned hydrau...

Listing

Rhenen

7541 km

automatic band saw machine Bomar

Bomar STG 230 GANC

good (used)

Call

Fully automatic band saw machine make Bomar type STG 230 GANC Capacity: 90 degrees round 230 mm square 230x230mm rectangle 280×200 mm 45 degrees round 210 mm Square 200×200 mm rectangle 200×200 mm 30 degrees round 130 mm square 80×80 mm rectangle 130×80 mm Tire size 2720 x 27 x 0.9 mm Adjustable cutting speed or 35-70 m/min Power 1.1 kW Dimensions 1350 x 1210 x 1360 mm Weight approx. 440 kg Hhgaxuhtu

Listing

Ahaus

7617 km

Deburring Machine

BOMAR SINGLE 250 II

used

Call

diameter of brush 250 mm Req2t width of brush 55,0 mm turning speed range 1400 / 2800 U/min workpiece dia. max. 90 x 90 mm voltage 400 Volt total power requirement 2,2 kW weight of the machine ca. 85,0 kg dimensions of the machine ca. 510 x 480 x 1230 mm Furnishing: - Deburring of individual pieces and small series - deburring of stretched round, rectangular and square tubes, as well as solid rods - Optional: deburring of straight sheet metal edges - Simple high speed radial brush rotation -...

Listing

Berlin

(dealership location)

7943 km

Hydr. 2 Column Metal Miter Band Saw

Bomar s.r.o. STG220 GA PNEU

ready for operation (used)

Call

Saw band dimensions: 2710x0.9x25mm, connected load: 1.7kW, length: 2000mm, width: 1570mm, height: 1230mm, weight: 510kg, the bar feed is defective. Ci9obv7yj2

Listing

Rödermark

7854 km

BOMAR Individual 620.460 GH

2010

good (used)

Call

Offer 22628 Technical data: - Saw blade dimension 6100 x 41 x 1,3 mm Chfulsw8xk - cutting speed adjustable in steps from 20 to 120 m/min - Hydr. lifting + lowering of the saw frame - Hydr. vice - Cutting pressure regulation - Swivel frame for miter cuts with cutting range - at 90° round 460 mm - square 460 x 460 mm - flat 610 x 450 mm - at 45° round 420 mm - flat 440 x 180 mm - upright 410 x 460 mm - at 60° round 310 mm - coolant unit - separate control panel - drive 400 V / 3...

Listing

Werdau

8009 km

Belt sander 150 x 2000

Bomar bSander 150.200

new

Call

BSander 150.200 machine is a machine polisher to grind tube front and profile ends, edges grinding and cylindrical grinding on the upper surface of the plant. Band size 150 x 2000 mm Wgtkowa Belt speed 29 m/s. 4,0 kW / / 3 x 400 V / / 50 Hz dimensions L x W x H 700 x 530 x 1130 mm Weight 90 kg Price on request

Listing

Enschede

7599 km

Automatic bandsaw with NC control

BOMAR ProfiCut 275.230 GANC

2022

new

13,500 €

Long material drilling system

Call

Delivery from stock: Automatic bandsaw with NC control. The start of the whole work cycle is completed after the length and number of pieces have been programmed. The required material length is set very easily on the moveable control panel. The biggest advantage of this machine is the possibility to program a various number of pieces of the processed material, with various lengths, without further control of the machine. The maximum length of an individual feed is 500 mm. A simple dialogue con...

Listing

Karlsbad

7902 km

BOMAR move d. 35.300/300.6000

2015

not inspected (used)

20,000 €

Call

max. drilling diameter: 35 mm drilling stroke: 300 mm travel range Y-axis: 300 mm travel range X-axis: 6000 mm drive X-axis: frequency converter Y-axis NC controlled Pdtnz 4-fold tool changer Pneumatic clamping unit up to 250 mm USB connection Micronizer Clamping pressure regulation up to max. 150 mm

Listing

Werdau

8009 km

Belt sander 75 x 2000

Bomar bSander 75.200

new

Call

BSander 75.200 machine is a machine polisher to grind tube front and profile ends, edges grinding and cylindrical grinding on the upper surface of the plant. Yrxz78 Belt dimensions 2000 x 75 mm Belt speed 29 m/s Power of 3 kW dimensions L x W x H 700 x 490 x 1130 mm Weight 72 kg Price on request!

Listing

7870 km

ZIMMER Z 252 / DG

new

Call

capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min total power requirement kW weight of the machine ca. 0,35 t P7odr The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Listing

Erwitte

7719 km

bandsaws

Metallkraft BMBS 300x320 HA-DG

2022

new

Call

Dimensions LxWxH: 1.8x0.95x2.1m Cdzcxo9bhy Net weight: 650kg Cutting area round: 300mm Miter device: +60 to -45 degrees miter device: +60 to -45 degrees AVAILABLE FROM STOCK Technical specifications Cutting range around 0 degrees 300 mm Cutting area rectangle 0 degrees 320x300 mm Cutting range around -45 degrees 300 mm Cutting range around -60 degrees 200 mm Cutting range around +45 degrees 270 mm Dimensions LxWxH 1.8 x 0.95 x 2.1 m Weight 650kg SCOPE OF DELIVERY saw band operating tool Length s...

Listing

Düsseldorf

7661 km

Double mitre saw

Kaltenbach KBS 920 DG

2005

good (used)

Call

1 branded double miter bandsaw, make Kaltenbach, type KBS 920 DG, year 2005 cutting size: 920 x 500 mm infeed: 18.000 mm outfeed: 18.000 mm Jfgji0p

Listing

Gütersloh

7706 km

Double miter

Elumatec DG 79

2005

used

8,700 €

Double mitre circular saw

Call

Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Digital angle display for section length Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-hand operation Extension to 4,500 mm removed Bnvxyzoy

Listing

Niederlangen

7585 km

ELUMATEC DG 104

1991

used

Call

cutting width 280 mm Cutting height 150 mm Motor output 2 x 4,0 kW saw blade 420 x 30 mm Cutting length 6000 mm speeds 2800 U/min air pressure 7 bar weight of the machine ca. 1750 kg dimensions of the machine ca. 7550 x 1600 x 1450 mm Furnishing: - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96 O33qqq9f

Listing

Ennepetal

7685 km

KALTENBACH KBS 620 DG

1999

used

Call

cutting diameter 380 mm saw band length 6175 mm cutting width 1,3 mm capacity 90 degrees: square 620 x 350 mm feed length 0-3000 mm capacity 45 degrees: round 350 mm capacity 45 degrees: square 430 x 350 mm Control Kaltenbach CNC mitre joint cuts -/+ degrees -45/90/+30 Grad feed stepless 0-300 mm/min cutting speed 15- 90 m/min total power requirement 4,5 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 3,1 x 1,2 x 2,3 m Horizontal full automatic with CNC control. Machine is a...

Listing

Weißenhorn

8040 km

Suction device

DIETZ DG 25

used

Call

Dimensions (L/W/H) ca. 700 x 500 x 1.080 mm Nlnof current intensivity 0,73 / 0,42 A weight ca. 80 kg

Listing

Metallkraft BMBS 460x600 HA-DG Doppelgehrung

Erwitte

7719 km

bandsaws

Metallkraft BMBS 460x600 HA-DG Doppelgehrung

2022

new

Call

Dimensions LxWxH: 3.6x1.13x2.7m drive power: 4.0 KW max. cutting range round: 460 mm Miter device: +60 to -45 degrees max cutting area rectangle: 600x460 mm Be2yhnd Net weight: 650kg Cutting area round: 120mm miter device: +60 to -60 degrees For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic With fully hydraulically controlled sawing functions Saw band drive with low-maintenance, oil-lubricated worm gear With robust three-pha...

Listing

Wiefelstede

(dealership location)

7608 km

Absolute encoder

Contact Dg 122.1

used

200 €

Conveyor Belt, Dump Belt, Dump Conveyor, Belt

Call

Absolute encoder, incremental encoder with solid shaft -Type: Dg 122.1 -No.: 401849/1 -Connection: 1 2 = 20 VAC/1000 rpm -Max.: 10000 rpm -Price: per piece -Number: 4x available -Weight: 1 kg Qlvoj0div

Listing

Hessisch Lichtenau

7826 km

GASUS DG 300-5/2,75

1996

used

3,500 €

Call

Belt conveyor, troughed belt conveyor, troughed belt conveyor GASUS type DG 300-5/2,75 belt conveyor, conveyor belt, belt conveyor Fabrig No: D-7321915 Year of construction 1996 useful length: 2,75 meter belt width: 230/300 mm Deflection roller diameter: 210 / 230 mm (rubberized drive roller) deflection roller width: 400 mm belt speed: approx. 15 meters/min. motor power: 0,75 kW B9vus7v90j Mains connection: 400 Volt, 50 Hz - Drive via SEW gear motor - Feed hopper 550 x 430 mm - Metal support rol...

Listing

Niederlangen

(dealership location)

7581 km

BERG & SCHMID GBS 242 DG Auto CUT

new

Call

cutting diameter 250 mm saw band length 2965 mm table height -- mm B2gt9axfbw 285 mm 37 + 74 m/min 2965x 27 x 0,9 mm 130 mm 130 mm 130 x 140 mm 200 200 200 x 200 240 mm 200 mm 285 x 200 1,1/1,3 kW 0,3 t total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Listing

Witten

7675 km

BEKA-MAK BMS 230 DG

2022

new

Call

Listing

Ahaus

7617 km

Through feed IR Drying line

BERG & SCHMID GBS 242 DG AutoCut

new

Call

cutting diameter 240 mm Ciqqj9ses0 capacity 90 degrees: square 200 x 200 mm capacity 90 degrees: flat 285 x 200 mm capacity 45 degrees: flat 200 x 200 mm capacity 45 degrees: round 200 mm capacity 60 degrees: round 130 mm capacity 60 degrees: square 130 x 140 mm dimensions of saw-band 2965 x 27 x 0,9 mm cutting speed 35 + 70 m/min work height max. 940 mm total power requirement 1,3 kW weight of the machine ca. 290 kg. range L-W-H 1.250 x 1.500 x 1.700 mm Furnishing: - Miter cuts left 60 ° + r...

Listing

Randers

7512 km

NETEK DG 3884

2008

ready for operation (used)

38,000 €

Gear motor 0.12/0.2 kW 150/225 rpm

Call

Maximum working width : 1080 mm Consist of : 1. 1500 mm roller conveyer 2. 6000 mm IR Heating unit Rgtpp 3. 1000 mm roller conveyer 4. 2000 mm cooling zone 5. 4500 mm out feed belt conveyer Heating : Gas / propane Nominel gas consumption : 4 - 5 m3/hour Maximum effect : 96 Kw Unit working hours : 10.320 PLC control with digital display Programmable with time/temperature/through feed speed Heating units : 10 Pc. platinum IR units Full L/W/H : 15500 x 2100 x 2300 mm Still connected to power/can be...

Listing

Wiefelstede

(dealership location)

7608 km

SSB DG-OE-0375.203.40-B8

used

250 €

Call

Gear motor, electric motor, three-phase motor Qlrizlk0v -Speed: 150/225 rpm -Power: 0.12/0.2 kW -Brake: 24 V -Construction: B5 -Shaft diameter: Ø 15 mm -Protection class: IP 44 -Weight: 10 kg

Listing

7870 km

Horizontal Bandsaw Semi-Automatic

Kaltenbach KBS 400 DG NA

2011

used

Call

Weight:3600 kg range L-W-H:2710 x 4520 x 2150 mm dimensions of saw-band:5.730 x 34 x 1,1 mm The Kaltenbach KBS400 DG NA horizontal band saw is an automatic band saw for cutting profiles in the steel construction and steel trading industry. The KBS 400 band saw has a miter device for double-sided angle cuts and a material replenishment gripper for fully automatic processing of individual bars, steel beams and layers. After the steel profile has been positioned for the head cut, the individual sa...

Listing

Bottrop-Grafenwald

(dealership location)

7642 km

Beka-Mak BMSY 750 DG NC

2022

new

Call

cutting diameter 800 mm saw band length 9600 mm cutting width 1300 mm capacity 90 degrees: square 800 x 800 mm 1300 x 750 mm 800 mm 770 mm Capacity 45° rectangular 570 x 750 mm capacity 60 degrees: round 570 mm capacity 60 degrees: square 770 x 770 mm Biwk7n8if0 capacity 60 degrees: flat 570 x 750 mm 800 mm 770 mm 1070 x 750 mm table height 880 mm speeds steplessly adjustable 20 - 100 m/min total power requirement 12,42 kW weight of the machine ca. 6,7 t dimensions of the machine ca. 5,05 ...

Listing

Hessisch Lichtenau

7826 km

Horiz. Miter bandsaw, double miter bandsaw

BERNARDO MBS 315 DG-VR PRO

new

5,000 €

Call

Horiz. Miter bandsaw, double miter bandsaw BERNARDO type MBS 315 DG-VR PRO Band saw for metalworking with swiveling saw bow. New machine from year of manufacture 2022 sawing range at 90° round Ø 255 mm sawing range at 90° square 230 x 230 mm sawing range at 90° rectangle 315 x 230 mm Sawing area at 45° round Ø 195 mm Sawing area at 45° square 195 x 195 mm Sawing area at 45° rectangle 195 x 230 mm Sawing area at 60° round Ø 115 mm Sawing area at 60° square 115 x 115 mm Sawing area at 60° recta...

Listing

Mercedes-Benz AD7/56DG-9 / AD 7/56 DG-9 Durchtrieb Vorderachse

Kallkar

(dealership location)

7600 km

Axis

Mercedes-Benz AD7/56DG-9 / AD 7/56 DG-9 Durchtrieb Vorderachse

2014

ready for operation (used)

Call

Fuel type Remaining 2ufsqy used drive through truck front axle, as good as new! Manufacturer: Mercedes Type: AD7-56DG-9 Model: 730 116 Variant: X007504476 gear ratio: 27:18 several in stock VAT must be paid as a deposit when exporting outside the EU, ALL DATA WITHOUT GUARANTEE, INTERMEDIATE SALE + IRRUPTURE FORWARDED - Condition for the purchase conclusion is a business activity of the buyer and their appropriate proof. Please send us a proof of your business activity (e.g. sales tax identific...

Listing

Mazzano

8238 km

Cnc Turning center

Avm Angelini DG 13

1994

good (used)

Call

Chuck size 310 mm Turning Size max. diametre 370 mm Turning Length 750 mm Ciqidefcpi Cnc fanuc

Listing

Wiefelstede

(dealership location)

7608 km

Heater fan

BVE HY-LO DG 20A

used

100 €

Call

Fan heater, mobile heater, gas heater, gas fan -Power: adjustable from 50 to 100 kW -Length: 560 -Width: 350 mm -Height: 500 mm -Gas type: propane -Number: 1x available -Price: per piece Qlwazdact -Weight: 16 kg

Listing

Schweiz

8020 km

KALTENBACH KBS 750 DG

2000

used

Call

weight of the machine ca.:3,3 t engine output:5,5 kW dimensions of the machine ca.:3,225 x 1,16 x 2,42 m saw band length:6990 x 41 x 1,3 mm capacity 45 degrees: square:520 x 500 mm capacity 90 degrees: square:750 x 500 mm cutting width:350 mm cutting speed:15 - 90 m/min saw band feed:0 - 300 mm/min Kaltenbach KBS 750 DG miter band saw machine for steel profiles processing with semi-automatic operation. Miter adjustment is -45°/90°/+30° for mitre cutting. The band saw is designed for sawing pr...

Listing

Bottrop-Grafenwald

(dealership location)

7642 km

Fixed price VAT not applicable

Beka-Mak BMSY 230 DG

2022

new

Call

cutting diameter 230 mm saw band length 2730 x 27 x 0,9 mm cutting width 130 mm speed 35 - 70 m/min Capacity 90° rectangular 320 x 130 mm 230 mm 180 mm Capacity 45° rectangular 230 x 100 mm 150 x 150 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 120 x 100 mm capacity 60 degrees: square 100 x 100 mm table height 760 mm total power requirement 1,8 kW weight of the machine ca. 430 kg dimensions of the machine ca. 1,35 x 0,7 x 1,3 m On semi-automatic models the saw arm is lift...

Listing

Friedberg

8081 km

Spare Parts

Sonstige/Other DG 35 S

2018

used

2,800 €

Call

Cabin Cgjuicxq3p ref: ANL1069914 lifting capacity 3500 kg at 500 mm load center, width: 1150 mm, suspension: FEM3, front dimension: 180 mm, own center of gravity: 92 mm, used DURWEN rotator DG35S, ready to rotate 360 endless, with side blades, without forks, incl connection hoses, forkCarriageWidth: 1150 ownCentre: 92 weight: 426 Capacité de la batterie: 3500A/h Modèle de la batterie:

Listing

Gütersloh

7706 km

Double miter

Elumatec DG 244

1999

used

21,700 €

Call

Maximum saw length: 6000 mm Saw blade diameter: 550 mm mass: Approx. 2,000 kg Ceslgiu7aq Automatic length positioning and angle adjustment via E 500 control Digital angle displays on both units for panning and tilting material support Minimum quantity spray device The machine is ready for dispatch on squared timber

Listing

Bottrop-Grafenwald

(dealership location)

7642 km

Beka-Mak BMS 270 DG

2022

new

Call

cutting diameter 270 mm saw band length 3160 x 27 x 0,9 mm cutting width 350 mm work height max. 910 mm speed 35 - 70 m/min 270 mm Capacity 90° rectangular 350 x 220 mm 210 mm Capacity 45° rectangular 270 x 210 mm 180 mm capacity 60 degrees: round 150 R mm capacity 60 degrees: square 100 R mm total power requirement 1,5 kW weight of the machine ca. 465 kg dimensions of the machine ca. 1750 x 770 x 1460 mm Biwk0fbkjp The HU 230 DG is a popular sawing machine and is heavily sold, due to its...

Listing

Bottrop-Grafenwald

(dealership location)

7642 km