Fully automatic sawing machine Ergonomic 310.250 ACNC-6200
Manufacturer Bomar
Year of manufacture 2012
Dimensions of the complete sawing line → L=16200 mm W=4385 mm H=1620 mm
The saw is fully enclosed, providing maximum protection for the operator and a clean machine environment.
A laser system is also part of the safety concept, which stops the machine immediately if the safety area is entered.
Sawing unit:
- Hydraulic clamping unit
- Infinitely variable saw band speed
- Infinitely adjusta...
Manual metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°)
Basic equipment:
- Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre)
- band tension indicator
- hydraulic control of the cast iron saw arm
- hydraulic clamping of the workpiece via short stroke cylinder
- Height limitation of the saw f...
Manual metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°)
Basic equipment:
- Large rotating support table without wear! (The cutting channel of the saw band rotates with the mitre)
- Belt tension indicator
- hydraulic control of the cast iron saw arm
- hydraulic clamping of the workpiece via short stroke cylinder
- height limitation of the saw fr...
Semi-automatic metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°)
Basic equipment:
- Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre)
- band tension indicator
- hydraulic control of the cast iron saw arm
- hydraulic clamping of the workpiece via short stroke cylinder
- Height limitation of t...
Semi-automatic metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°)
Basic equipment:
- Large rotating support table without wear! (The cutting channel of the saw band rotates with the mitre)
- Belt tension indicator
- hydraulic control of the cast iron saw arm
Xs9e3i2mv
- hydraulic clamping of the workpiece via short stroke cylinder
- height limita...
Fully automatic band saw machine
Hhgaxuhtu
make Bomar
type STG 230 GANC Capacity:
90 degrees
round 230 mm
square 230x230mm
rectangle 280×200 mm
45 degrees
round 210 mm
Square 200×200 mm
rectangle 200×200 mm
30 degrees
round 130 mm
square 80×80 mm
rectangle 130×80 mm
Tire size 2720 x 27 x 0.9 mm
Adjustable cutting speed or 35-70 m/min
Power 1.1 kW
Dimensions 1350 x 1210 x 1360 mm
Weight approx. 440 kg
Semi-automatic metal band saw with high
cutting accuracy.
With this machine are 90° cuts, as well as
miter cuts, right and left up to 30° are
steplessly possible. (swivel range 60°)
Technical data:
Cutting area 610 x 440 mm at 90°.
drive motor with 3 kW- 400V-50 Hz
Cjatzslkmq
saw band 5200 x 34 x 1,1 mm
cutting speed 20-120 m/min
weight 1003 kg
Standard version:
- Hydr. cutting pressure regulation 2-fold
- Hydr. material tension via long stroke cylinder
- Stepless belt speed via frequency conv...
diameter of brush 250 mm
width of brush 55,0 mm
turning speed range 1400 / 2800 U/min
workpiece dia. max. 90 x 90 mm
Req2t
voltage 400 Volt
total power requirement 2,2 kW
weight of the machine ca. 85,0 kg
dimensions of the machine ca. 510 x 480 x 1230 mm
Furnishing:
- Deburring of individual pieces and small series
- deburring of stretched round, rectangular and square tubes,
as well as solid rods
- Optional: deburring of straight sheet metal edges
- Simple high speed radial brush rotation
-...
Offer 22628
Technical data:
- Saw blade dimension 6100 x 41 x 1,3 mm
- cutting speed adjustable in steps from 20 to 120 m/min
- Hydr. lifting + lowering of the saw frame
- Hydr. vice
- Cutting pressure regulation
- Swivel frame for miter cuts with cutting range
- at 90° round 460 mm
Chfulsw8xk
- square 460 x 460 mm
- flat 610 x 450 mm
- at 45° round 420 mm
- flat 440 x 180 mm
- upright 410 x 460 mm
- at 60° round 310 mm
- coolant unit
- separate control panel
- drive 400 V / 3...
BSander 150.200 machine is a machine polisher to grind tube front and profile ends, edges grinding and cylindrical grinding on the upper surface of the plant.
Band size 150 x 2000 mm
Wgtkowa
Belt speed 29 m/s.
4,0 kW / / 3 x 400 V / / 50 Hz dimensions L x W x H 700 x 530 x 1130 mm
Weight 90 kg
Price on request
Delivery from stock:
Automatic bandsaw with NC control. The start of the whole work cycle is completed after the length and number of pieces have been programmed. The required material length is set very easily on the moveable control panel. The biggest advantage of this machine is the possibility to program a various number of pieces of the processed material, with various lengths, without further control of the machine. The maximum length of an individual feed is 500 mm. A simple dialogue con...
max. drilling diameter: 35 mm
drilling stroke: 300 mm
travel range Y-axis: 300 mm
travel range X-axis: 6000 mm
drive X-axis: frequency converter
Y-axis NC controlled
4-fold tool changer
Pneumatic clamping unit up to 250 mm
USB connection
Micronizer
Pdtnz
Clamping pressure regulation up to max. 150 mm
Manual miter band saw with automatic
Editing function for angles up to 45 ° left and right up to 30 °
Cutting zone ø 230 mm
7pebk7bxn
Power 1,1 / 1,5 kW
Blade 2.720 x 27 x 0, 9 mm
Bandgeschindigkeit 40/80 m / min
Connection 400V
incl.
-automatic function with quick approach to the work piece with handle switch
-Ergonomic operation
-powered chip brush
-Monitoring of the saw band tension
-Vice quick adjustment
-large turntable with integrated miter scale
-Coolant system with chip tray
BSander 75.200 machine is a machine polisher to grind tube front and profile ends, edges grinding and cylindrical grinding on the upper surface of the plant.
Yrxz78
Belt dimensions 2000 x 75 mm
Belt speed 29 m/s
Power of 3 kW dimensions L x W x H 700 x 490 x 1130 mm
Weight 72 kg
Price on request!
The machine individual 520.360 DGH is a semi-automatic double mitre band saw in two-column design. The mitre range of the saw extends from 30° left continuously to 30° right. The model individual 520.360 DGH has a hydraulic full stroke vice and an easy to use control in plain text display.
Standard equipment details
- Double mitre 30° - 45° - 90° - 45° - 30°
- Hydraulic full stroke vice
- Saw frame mounted on preloaded linear guides
- Infinitely variable saw band speed
- Infinitely adjustable sa...
semi-automatic bandsaw with double-sided miter R/L 60°
incl. hydraulic band tensioning display
Minimal quantity lubrication can be retrofitted
Cutting capacity
90° square, approximately 280 mm / flat 410 x 280 mm. 280 mm
45° round R 280 mm / flat 310 x 150 mm square. 270 mm
Bdsuvltmzf
45° L round flat 330 x 100 mm/280 mm / square. 280 mm
60° R round flat 205 x 100 mm, 210 mm / square. 190 mm
60° L round 220 mm / flat 225 x 100 mm square. 210 mm material circulation 756 mm
Blade dimension 3800 x...
The workline 510.350 DGH is a semi-automatic double mitre bandsaw in swivel frame design.
Equipment details:
- Double mitre 30° - 45° - 90° - 45° - 30°.
- Hydraulic full stroke vice
- Infinitely variable saw band speed
- Infinitely adjustable saw feed and cutting pressure
- Automatic cutting pressure regulation
- Precision carbide saw band guides
- Powerful drive motor with 3kW
- Simple, easy to understand control system
- Control panel in ergonomic position
- Large dimensioned hydraulic unit
- ...
The workline 410.280 DG is a manual double mitre band saw in swivel frame design. The mitre range of the saw extends from 30° left continuously to 30° right. This saw has an easy-to-operate pull-down vice with quick-move system and quick-clamping device.
Equipment details:
- Double mitre 30° - 45° - 90° - 45° - 30°.
- Large, clearly visible mitre scale
- Pull-down vice with Quick-Move-System
- Infinitely variable saw blade speed
- Infinitely adjustable saw feed
- Precision carbide saw blade guid...
manual band saw /self lowering with mitre on both sides
Cutting capacity
90° round 230 mm / flat 275 x 230 mm / squared 230 mm
45° R round 195 mm / flat 190 x 190 mm / squared 190 mm
45° L round 170 mm / flat 185 x 150 mm / squared 150 mm
60° R round 120 mm / flat 120 x 85 mm / squared 85 mm
Material support height 760mm
Nfayz
saw blade dimension 2720x27x0,9mm
Cutting speed 40/80 m/min.
drive power 1,1/1,5 kW//400V//50 Hz
Smallest diameter 5 mm
Dimensions L x W x H 1600 x 1150 x 1477 mm
Weight 3...
turning diameter 42 mm
turning length 250 mm
control
I27juqslg
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
CNC-lathe with bar feed
with Sameca bar feed
Injector blasting cabinet/ Automatic blasting machine ISK802
Working area W= 1200mm depth= 880mm height= 745mm.
Bys8hmbyiw
The height of the operator can be individually adjusted to the height of the worker by means of the screw-on foot frame.
The handy blasting cabin. The two-hinged folding door, relieved by gas pressure shock absorbers, offers a completely free front when open and thus enables the loading of heavy workpieces by means of a forklift truck or overhead crane.
For questions regardi...
Type of machine CNC lathe
Ye2uhxxj
Make GILDEMEISTER
type GAC 65
year of construction 1991
Control type CNC
Technical details
turning diameter 140 mm
turning length 274 mm
Control EPL 8 axes
Total power requirement 20 kW
Machine weight approx. 4,2 t
pewiMOVER ERGO. Designed for the ergonomic unloading & loading of Cartons (small or large ), Strapped package Tyres ,
Furniture parts, White and Brown goods.
In fact, whatever it is, if it needs loading or unloading then the pewiMOVER-ERGO can handle it.
From the lifting platform the operator is always in the most ergonomic position to take the cartons out of ocean containers and /or trailers.
The top cartons are NOT above shoulder height. The head of the operator is always free from the top of ...
sprzet sprawdzony w 100% sprzedawany przez firmę zajmująca sie serwisem maszyn cnc
Cbchrycwkm
100% tested equipment sold by a company dealing with the service of cnc machines
Bending Machine 3 roll
Gzosug
Brand RAGACHE
Type New Tube CP70
3 drive rollers diameter 232 mm
Capacity rectangle Standard steel 60.0 mm
Capacity round Standard steel 40.0 mm
Capacity L Standard steel 70.0 mm
Capacity U Standard steel 120.0 mm
Capacity T Standard steel 60.0 mm
Capacity I Standard steel 120.0 mm
CNC ultra high pressure water jet cutting machine
SAME /Bogacki - 2515 BA 2D
-demonstration machine -
travel: 2.550 x 1.550 x 200 mm
Bt0azkefbb
Control system: BOSCH MTX Aquacut edition
- CAD / CAM system
- Operating PC with portable electronics. Handwheel
incl. high pressure pump HB 50
incl. stainless steel working table ( 2.700 x 1.700 mm)
incl. CE- safety device (light barriers)
incl. splash guard (see pictures)
incl. abrasive container (250 kg)
incl. abrasive cutting head Allfi
inc...
0 3000 mm
Working width 460 mm
Wheel width 460 mm
roll diameter 90 mm
0 6 St.
Hqcxj3zw8
work height max. 460 mm
weight 280 kg
dimensions of the machine ca. 3,05 x 0,75 x 0,65 m
Model 2023 - the marking hero among the laser markers!
Metal - plastics and much more!
Easy. Simple. Precise.
- EZCAD 3 (real 64bit map) with up to 4 axes
- Windows Professional 64bit
- Intel I3 or I5 with 8Gb and ultra fast M2 hard disk
- 23" TFT screen for fatigue-free work
- Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz
(optionally with variable pulse width and up to 2000 kHz for color start marking)
- Scanner unit "DigiScan Eco 10" for detail and pre...
number:31
tool adaptor:55 mm
diameter:9 Zoll
Iekcvxr
Type No.30211006, F-No.F746550003366, Cutterplates 32, number of cutters on stock 31
All tools 9 inch
Used Bottle Labeler Auxiemba GACELA R 8 II IZ 10000 bph year 2000 Builder Auxiemba Model GACELA R 8 II IZ Year of construction 2000 Hourly production bottles per hour 10 000 BPH Direction of rotation Counterclockwise Left Right Number of targets 8 Number of stations 2 Type of labeling Hot glue Number of labels Front Back State Seal Manuals available Yes Machinery still in operation Yes Formats currently processed Glass 0 375 l 0 5 l 0 75 l 1 5 l
Cjbf2esbrc
The Werktuigen Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Werktuigen. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.