10
Used profile bending machine from BPR
Type: CP 30
Year of construction: 1995
Camma7wjtf
Axle diameter: 30 mm
Incl. various rollers set
1
bending length: 2100sheet thickness: 30upper roll diameter: 360
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hydraulic p...
11
7
sheet width 2070 mm
plate thickness 30 mm
pre-bending 25 mm
diameter of upper rolls 380 mm
roll diam. bottom roll 360 mm
total power requirement 37 KW
weight of the machine ca. 13,15 t
dimensions of the machine ca. 4,65 x 2,15 x 1,95 mm
Basic equipment:
Oyait
- Conical bending device
- Swiveling top roller
- Electrically adjustable rear roller
- Conical bending device
- driven top roller
- Pre-bending device
- brake motor
- Safety device emergency leash
- CE certified
- documentation
Options...
15
Discover more used machines
8
FANUC 160 I-MB control
KNOLL chip conveyor, type 1200 S-2, made in 2012
4 workstations
Bl2oztwbxu
1
bending length: 2600sheet thickness: 30upper roll diameter: 390
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
T82asyzt
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hy...
9
Electric Pallet Truck
Serial N°: 330136800218
Capacity: 3000kg
Closed height: 930mm
Overall weight: 750kg
B9cvmdqhy0
Fork length: 1150mm
YOM: 2008
Condition: good
Bereifung vorne Typ: Polyurethane
Bereifung hinten Typ: Polyurethane
1
Angle shears make THEIS type 3 / 30 - 60 H 80
machine # 1085/77, year of construction 1977
Technical data:
Sheet thickness at 42kp/mm◊ max. 4 mm.
cutting dimensions max. 300 x 600 mm
Number of strokes (continuous stroke without load) 92/min.
stroke 26 mm
Blade angle 1,5 °
Mechanical hold-down device
Opening width between downholder and knife table 6 mm
Hydraulic operating pressure 300 bar
Oil tank 300 ltr.
Connected voltage 380 V/ 50 Hz
Drive power 15 kW
Drive power conveyor belt 0,55 kW
outer d...
6
Pump capacity: 8 liters/min
Hyrryql9w
Pressure: 210 bar
Overall size: 495x340x690 mm
6
Electric Pallet Truck
Serial N°: 330136700086
Capacity: 3000kg
Lift height: 250mm
Closed height: 930mm
B9cvlg3w3x
Overall weight: 750kg
Fork length: 1150mm
YOM: 2007
Condition: good
Bereifung vorne Typ: Polyurethane
Bereifung hinten Typ: Polyurethane
8
sheet width 3100 mm
plate thickness 6,0 mm max.
plate thickness 5,0 mm anbiegen
min. dia. 300 mm
roll diam. toproll 200 mm
total power requirement 5,5 kW
weight 4.000 kg
range L-W-H 4800 x 1300 x 1270 mm
Bvwkedsp80
** New price ~ 25.000 euros
** The machine was only used for about 6 months
Furnishing:
- Electrically driven top and bottom rollers
- Upper roller can be swiveled out
- Conical bending device
- Asymmetrical roller arrangement
- self-braking main engine
- separate control and oper...
1
Technische Daten: - Arbeitslänge 3000 mm
- Arbeitsbreite 1200 mm
- Verleimdicke 20 - 80 mm
- Anzahl der Ebene 3
- manuel Drehen
- die Pressung ist mit dem einseitigen hydraulische Zylinder ausgeführt
- Anzahl der Zylinder pro Ebene 6
- die Druckzylinder sind fest
- Zylindertyp FI 50 x 150 mm
- Spezifische Druck 7 kg/cm2
- Anzahl der Niederhaltern pro Ebene 3,4
- jeder Niederhalter hat einen pneumatischen Zylinder
- Typ der pneumatische Zylinder FI 50 x 75 mm
- jeder Niederhalter hat ein eigenes ...
7
sheet width 3040 mm
plate thickness 7 mm
pre-bending ja
roll diameter 225 mm
main drive 11 kW
back roll setting 4 kW
weight of the machine ca. 5,3 t
dimensions of the machine ca. 4,4 x 1,15 x 1,47 m
Beocr7w8g3
Condition: ready for operation
Video available on our website.
Electric 380 Volt
Foot pedal
Light barrier control
German quality product with asymmetrical roller arrgement and pre-bending,
conical bending by tilting the rear roller and bottom roller via manual tooth
couplin...
15
2
external diameter max. 30 mm
B7pb7xnyxp
workpiece length 250 mm
250 Bar
weight 1,6 t
2 available
1
Hardened rollers (standard) for a wide spectrum of materials
Taper bending fixture
Motorized rear roller adjustment
E9cjhtf
Rigid steel construction
High quality steel rollers
2 driven rolls
Top roller swings out
Lower roll with manual feed, motorized feed available as an option
Central lubrication
Separate control panel
Meets CE requirements
2
Plate roll bending machine with prepinch
Capacity Plate thickness 30 mm
Plate width 2000 mm
Pre-pinch 25 mm
Top roll dia 400 mm
lower rolls dia 380 mm
max plate width 2050 mm
power electric driven rolling on centralized gear unit
side rolls hydraulic bending with pre-pinch
Upper roll pinch press positioning for prebend
Hydraulic open front drop-end to unload round closed shells
Centralized control panel electric control with digital readout of the rolls
B8mha9lq8o
machine dimen...
1
Tapping attachment make FAHRION type GA 30-3
Technical data:
Cutting edge range 6 - 18 mm
Clamping range / drill shank Drm. 7 - 22 mm
gr. diameter 82 mm
projection from spindle max. 166 mm
Weight approx. 4,0 kg
with
- 6 collets
M7bwqxc9i
used, in very good condition
2
second hand
Make Himmelwerk
Type SP 103 / 3-300
Drive:
Bn0pxtyctl
Mach.-No.. D 234705
4 kW
Speed 3000 rpm.
50 Hz
Converters / pathogens:
HZ pathogen 50
HZ exhaust 300
kVA 3
Storage location 97447 Gerolzhofen, freely loaded, unpacked
Delivery in actual condition as visited,
without overhaul
without guarantee and warranty
1
bending length: 3100sheet thickness: 8upper roll diameter: 230
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
Fwzw0cf
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hydr...
13
- machine in stock
Qb7hjzm
- after a technical review
- very good condition
- POLISH production
- year of production 2003
TECHNICAL PARAMETERS:
- working width 1300 mm
- working height 100 mm
- 3 aggregates
- aluminum bodies - spiral arrangement of grooves under the brush
- a set of 72 segment abrasive inserts (agave hairs + abrasive cloth) for fixing in the head,
- length of cartridges: 1330 mm; Height of the bristles: 70 mm,
- granulation of inserts in the range of choice: P 60 ÷ 400,
- Width...
9
10
Fully automatic dough dividing and rounding machine
bun press
Model: 3-30 "The Original"
with 3 active plates
Part range 40 to 100 grams/piece
Division 30 pieces
easy operation of the 10 programs
Stainless steel knife
Press head reinforced
Replaceable cutter head
machine mobile
DGUV V3 tested
Connection 400V, 1.3 kW, 16A-CEE plug
Dimensions: 620 x 660 x 1700 mm, WxDxH
new machine
with 24 months warranty
B7ktn9h2jl
Come to our large bakery machine warehouse and find your machine!
1
Column drilling machine Fabr. BGU
technical data:
max. drilling capacity 30 mm
tool holder MK 3
throat 280 mm
quill stroke 110 mm
infinitely variable speeds 110 - 1450 rpm.
table size 400 x 430 mm
drive power 1,1 kW
dimensions 500 x 800 x 1750 mm
D9nxgdt
6
Voltage: max 600 V
Product condition: New from old Stock
Case: very good, no scratches
Current: max 65 A
Packaging: originally packed
Guarantee in months: 12
Item No.: 30 36 12 3
B87itf0svc
1
bending length: 3100sheet thickness: 6upper roll diameter: 210
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
H3zt2mo8i
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hy...
1
Ring Rolling machine ZOPF
- model ZB 30/3 MD
Mzu9r
TECHNICAL SPECIFICATIONS:
- three driven shafts, smooth surface
- manual adjusting of the center roller
- working position horizontal and vertical (optional)
- digital readout
- shafts are supported by conical bearings
- slide bars on the slide-support are exchangeable
- shaft diameter: 20 mm
- roller diameter: 76-86 mm
- shaft rpm: 11 U/min
- voltage: 400V 50Hz 3Ph
- drivingmotor: 0,18 kW
- adjusting way: 35 mm
- weight: 85 kg
- dimensions: 53...
9
6
Dough dividing and rounding machine, roll press
Model: SM 3-30
bun press
simple manual operation
with 3 active plates
Part range 35 to 90 grams/piece
Division 30 pieces with new stainless steel knives
standing machine
Connection 400V, 0.75 kW, 16A-CEE plug
DGUV V3 tested
Used machine overhauled
Ca8jlhviw7
with 6 months warranty!
Visit our large sales warehouse with over 400 bakery machines!
4
3-fold combined hydraulic sheet metal working machine
Hydraulic swing bending machine - press brake - plate shear
make GRIEBEL type SAS 75-30-4 year of construction 1981
Technical data:
POWER PRESS BRAKE
working pressure 75 t
working length 3050 mm
throat 120 mm
stroke 270 mm
Feeding speed 37 mm/sec.
working speed 0 - 30 mm/sec.
Return speed 45 mm/sec.
Number of angle programs 6
POWER SWIVEL BENDING MACHINE
length 3050 mm
sheet thickness 3,0 mm
throat 400 mm
Stroke of the upper beam 290 mm
Forwa...
6
Function: Tested
Guarantee in months: 12
B9atxboyuq
Traces of use: some
Connection Thread: M 8
Case: slight scratches
Switching State: NPN / PNP: PNP
Product condition: used out of assembly line
Item No.: PKI-30/W-3-P2
1
bending length: 3100sheet thickness: 13upper roll diameter: 300
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
H3zq3awv8
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are h...
10
Elvlwdcu
9
15
Cdhqmq0le2
4
3-fold combined hydraulic sheet metal working machine
Hydraulic swing bending machine - press brake - plate shear
make GRIEBEL type SAS 75-30-4 year of construction 1981
Technical data:
POWER PRESS BRAKE
working pressure 75 t
working length 3050 mm
throat 120 mm
stroke 270 mm
Feeding speed 37 mm/sec.
working speed 0 - 30 mm/sec.
Return speed 45 mm/sec.
Number of angle programs 6
POWER SWIVEL BENDING MACHINE
length 3050 mm
sheet thickness 3,0 mm
throat 400 mm
Stroke of the upper beam 290 mm
Feedi...
6
Current: max 20 A
Product condition: New from old Stock
Voltage: max 300 V
Case: very good, no scratches
Guarantee in months: 12
Packaging: originally packed
Qec2l
Item No.: 30 31 28 3
1
bending length: 3100sheet thickness: 16upper roll diameter: 330
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hydraulic p...
