5
Door hold-open magnet, door magnet, hold-open magnets, fire door
Lteqz
-Type: GT 70 A 001
-Voltage: 24 V 8 W.
-Holding force: 2000 N
-Number: 6x magnets available
-Price: per piece
-Dimensions: Ø 70 x 35 mm
-Weight: 0.83 kg
5
The FAMIX 35000 two - components mixer was built in 1998 by the German manufacturer H. FALTERBAUM FAMIX-MASCHINENBAU GMBH. The machine was in use in a mineral water company in Germany. Due to a restructuring of the complete company, new filling lines will be purchased and this machine becomes available for sale. The machine is still assembled on site and under power.
Gfz3ycp
9
Cross cutting saw
HM-D-6500 R
Maximum cutting height 160mm
Max cutting width 500mm
Saw blade diameter min-max. 500-550mm
Axle hole 30mm
C0msb3jp0
Double-hand control
1240kg, 380V, 8.5kW
2
For Vollmer Cana/H gang saw sharpening machine
1 front plate with counter and control block 1
Springs and wear parts new
B0zrchqkid
Discover more used machines
6
We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy:
• Fully inspected machines
• Delivered to your jobsite
• Money Back Guaranteed
• Safe payment methods with possibility to pay at delivery
2021 - Bobcat - S450 | Used Wheeled Skid Steer with 12 hours in very good condition. Our expert inspector checked 49 inspection points - 48 were approved, 1 showed imperfections, 0 presented issues. Buy it now for
Lwckjiif
EUR 36.500
or make us an offer. We can deliver from Wesel, Ge...
5
Mortise countersink, radius countersink, countersink
-Manufacturer: Bilz
Yqcb7k
-different sizes: countersink
-different recordings: from H2-H6
-various: centering mounts and bolts
-Sale: only complete
-Weight: 20 kg
3
The beverage deaeration unit was manufactured by the German manufacturer H. Falterbaum Famix-Maschinenbau GmbH in 1995. The machine was used in a beverage company in the netherlands. Complete technical documentation available.
Ccuwmaewm0
7
max. grinding diameter 260 mm
grinding length 500 mm
workpiece length 710 mm
centre height 115 mm
tip removal 690
clamping diameter max. 260 mm
longitudinal slide -travel 520 mm
cross slide - travel 270 mm
Vertical path of the grinding wheel 300 mm
Pivotability of the clamping table 320 mm
Caihexn0fj
speeds 2250 / 3000 / 4500 / 6000 U/min
total power requirement 1,4 kW
weight of the machine ca. 1,1 t
required space 1,91x1,5x1,47 m
The exact technical data must be requested from the buyer aga...
10
Commission 66571-73
Qqojx
Load capacity 0 kg
Drive type
Mast type Standard
Lifting height 0 mm
Overall height 2566 mm
Free lift 0 mm
Forks 0 mm
technically new
optical new
tires_front
tires_rear
special equipment 3rd valve, 4th valve, working lights rear, working lights front, heating, full cab, air conditioner
3
radio controlled measuring probe SK50
Jyhvny
5
Countersink, countersink
-Sizes: 2x20/2x30/3x45/4x60 mm
-Countersink: 90 °
-Manufacturer: Bilz
-Sale: only complete
Qllemupkc
-Weight: 5 kg
15
Cc3oplaknk
15
Bucket width 1m Weight 980 kg 12hp, very many new parts, customer service, tyres,
lighting, ignition lock, V-belt etc.has been standing unused for a long time, has not been tested for function! Under reserve
Condition: used
Ceb3xkbof9
Place of storage: warehouse
10
Commission 66482-01-1
Load capacity 1 kg
Drive type Diesel
Ccouvw8fk3
Mast type standard
Lifting height 3100 mm
Overall height 2530 mm
Free lift 0 mm
Forks 1200 mm
technically new
optical new
tires_front 405 x 70 x 18 air
tires rear 405 x 70 x 18 air
Special equipment 3rd valve, working light rear, working light front, heating, soot filter, STVZO approval, full cabin
Attachments: bulk material bucket
5
Sample gas cooler
-Measuring gas cooler with: protective lining
-Connection: 240 volts
97bdzaouz
-Dimensions: 335/560/H390 mm
-Weight: 32 kg
15
Qrtzn
2
6 St.
100 kg
Hard0ij
range L-W-H 705 x 736 x 1019 mm
weight 126 kg
Furnishing:
- Tool cabinet with 6 drawers / ball bearings
75 - 125 - 150 - 150 - 200 - 200 mm
- drawer extension 88%
- Usable dimensions inside: 600x600 mm
- lockable
10
Commission 45208-78
Load capacity 0 kg
Drive type
B7tyixc328
Mast type Standard
Lifting height 0 mm
Overall height 2297 mm
Free lift 0 mm
Forks 0 mm
technically new
optical new
tires_front
tires_rear
special equipment 3rd valve, working light rear, working light front, heating, full cab
4
2013 Bobcat E25EM Rubber Tracks, Blade, Offset, CV, QH, Piped, Bucket (Broken Track Tensioner) / Cadenas Goma, Hoja Dozer, Brazo Giratorio, Válvula Seguridad, Enganche Rápido, Instalación Hidraulica, Cazo
Cendvnwm8m
10
Cc9wzztytm
5
Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel
-Display range: 100 V - 500 V
-Installation dimensions: LxWxD approx. 140x140x93 mm
Lpcwdn0x
-Dimensions: 144/144/H93 mm
-Weight: 1 kg
15
Cc0y8jzyjw
5
Weishaupt L3Z/A oil burner version D. 65kg/h
Qxehb
14
Cc3odxcpad
4
2014 Bobcat E50 EM Rubber Tracks, Blade, Offset, CV, QH, Piped, Bucket / Cadenas Goma, Hoja Dozer, Brazo Giratorio, Válvula Seguridad, Enganche Rápido, Instalación Hidráulica, Cazo
Cendurc3cj
This machine will be sold by Euro Auctions at an unreserved auction in Zaragoza, ES on 5th October. For more information please go online.
10
Commission 66612-28
Load capacity 2600 kg
Drive type diesel
Mast type telescopic
Lifting height 5800 mm
Overall height 2140 mm
free lift 0 mm
Forks 0 mm
technically new
optical new
tires_front 405 x 70 x 20 air
tires rear 405 x 70 x 20 air
special equipment 3rd valve, working light rear, working light front, heating, full cab
Cdizf2ym7x
5
Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack
-Manufacturer: HL, hydraulic unit for hydraulic punch
-Type: DK52 1-6-250P-391K
Gwx9h0
-Motor: Junginger 5.5 kW/1455 rpm
-Nominal pressure: bar
-Liter output: l/min
-Pressure display: up to 250 bar
-Pressure accumulator: Hydac 2.5 liters
-Hydraulic tank/filter/valves: see pictures
-Dimensions: 540/630/H1210 mm
-Weight: 198 kg
3
RL40/1B. ZM Oil throughput 230kg/h
Cerbahgpk8
4
2013 Bobcat E80 Rubber Tracks, Blade, (Offset Cylinder Defect), Piped, Bucket / Cadenas de Goma, Hoja Dozer, Brazo Giratorio (No Funciona), Instalacion Hidraulica, Cazo
Gkky7mr7
This machine will be sold by Euro Auctions at an unreserved auction in Zaragoza, ES on 5th October. For more information please go online.
10
Commission 45448-35
Load capacity 3500 kg
Drive type diesel
Mast type telescopic
Lifting height 6889 mm
Overall height 2477 mm
Free lift 0 mm
3gwd3kv7
forks 0 mm
technically good
optically good
tires_front 500 x 70 x 24 air
tires rear 500 x 70 x 24 air
special equipment 3rd valve, working light rear, working light front, heating, soot filter, full cabin
5
Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel
-Type no.: 4205 1021/1
-Display range: 0 V - 40 V
-Installation dimensions: LxWxD approx. 140x140x90 mm
Bagdm2zkw0
-Dimensions: 144/144/H90 mm
-Weight: 1.2 kg
4
Weishaupt WM-L20/2a. 2100kw. 176kg/h
Khze2so2
9
Commission 56731-14
Load capacity 3600 kg
Drive type diesel
Mast type telescopic
Lifting height 11852 mm
Overall height 2430 mm
Free lift 0 mm
Cdizirs9sa
Forks 1200 mm
technically new
optical new
tires_front 400 x 80 x 24 air
tires rear 400 x 80 x 24 air
Special equipment 3rd valve, working lights rear, working lights front, heating, soot filter, STVZO approval, full cab front windows protection grille
5
Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear
-Number: max. 3x drill
-Admission: M8
Btipydecs
-right/left: rotating alternately
-Distance drill: 25 mm, offset (see photo)
-Number: 3 drill heads available
-Price: per piece
-Dimensions: 90/85/H70 mm
-Weight: 1.6 kg/piece
4
Weishaupt RL30/2A version EM Old throughput 195kg/h
2usecy
1