8
Weiss climatic test chamber
Here we offer you a Vötsch climatic test chamber.
Cbz2zrhzh7
Vötsch climatic test chamber air cooled
(year of construction September 2020)
Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm
Cabinet dimensions: Height 2000 mm x width 1415 mm x depth 2030 mm
Characteristic values for temperature tests:
Temperature range: -42°C to +180°C
Temperature change rate, cooling: 3.0 K/min
Temperature change rate, heating: 4.0 K/min
Temperature gradient
5
RS Simulators
TEE160/LN2(40)S
Zwick / Roell
Temperature chamber
for AllroundLine
Temp. -40°C to + 160°C
Nzd22
All our equipment is tested by qualified technicians and, if necessary, adapted to meet regulatory requirements, so that carefree operation within the framework of legal requirements is guaranteed.
10
Weiss climatic test chamber
Here we offer you a Vötsch climatic test chamber.
Grxhmpx
Vötsch climatic test chamber air cooled
(year of construction September 2020)
Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm
Cabinet dimensions: Height 2000 mm x width 1415 mm x depth 2030 mm
Characteristic values for temperature tests:
Temperature range: -42°C to +180°C
Temperature change rate, cooling: 3.0 K/min
Temperature change rate, heating: 4.0 K/min
Temperature gradient
11
Here we offer you Ascott Atmosfär corrosion test chamber.
Ascott Atmosfär AT2600IP Test Chamber
Ascott Atmosfär test chambers are specially designed to perform automatic test cycles according to the most demanding
for the simulation of corrosion phenomena.
Such test cycles are increasingly required in some sectors of the automotive industry.
Such cyclic tests include tests under variable values of humidity and temperature, repeated spraying of the salt solution from an oscillating,
top-mounted n...
5
x-travel 3.500 mm
y-travel 3.000 mm
z-travel 1.000 mm
Svil2s
Control HEIDENHAIN TNC-426 PB
table surface area 4.100 x 1.250 mm
distance between columns 2.540 mm
rapid travel x/y/z 12/15.000 mm/min
distance spindle /table 1.200 mm
feed 5.000 m/min
Tool taper ISO - 50
number of spindle speeds 3.000 U/min/rpm
Spindle power 30 kW
handwheel Inkl.
total power requirement kW
weight of the machine ca. 30,5 t
dimensions of the machine ca. m
Included:
Automatic Head 4th and 5th Axis
Discover more used machines
11
General Data
Measurements width 5500 mm
Measurements depth 2600 mm
Measurements height 2600 mm
Machine weight 10300 kg
Control Unit
Brand Mazatrol
Model T32-3
Ddtqosifq
Main Drive
Spindle speed range 3000
Spindle motor power 40.2 HP
Tools
Type of tool holder SK50
This Mazak Integrex 40 ATC M/C lathe machine was manufactured in 1990 in Japan. This machine is operated through a Mazatrol T32-3 control unit. It work with a spindle speed up to 3000 rpm.
Application Types
Turning
5
Here we offer you a Heraeus Vötsch temperature test chamber.
Heraeus Vötsch temperature test chamber air cooled
Test chamber capacity approx. liter 110
Test chamber dimensions: Width 560 mm Depth 350 mm Height 630 mm
Outer dimensions: Width 850 mm Depth 1030 mm Height 1640 mm
Temperature range: -40°C to +180°C
Hvpua8x
Sound pressure level approx.
12
Weiss temperature test chamber WT 11-18 KWP 500/40
Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products.
Manufacturer: Weiss Technik
Type: KWP 500/40 - 180 DU
Designation: WT 11-18
Type: Temperature test chamber
Test chamber volume: 500...
2
White
WK - 180/40
Bnvvdbki
-40°C to +180°C
Climate chamber
with humidity 10 to 98 %
5
Here we offer a Weiss cold-heat test chamber.
Designation: SB22/500/40-S air cooled with humidity
cold-heat operation: -40°C...+180°C
Cbvrawhasi
climatic operation: +10°C...+95°C
Humidity range: 10...98 % r. h.
Temperature change rate:
Cooling down: approx. 2.5 K/min
heating up: approx. 2,5 K/min
Outer dimensions with and without hinges and mass of the test chamber;
External dimensions with hinges and door lock: H: Height 1980 mm W: Width 1220 mm D: Depth 1365 mm
External dimensions without hi...
10
Here we offer a very well maintained Feutron climatic test chamber KPK 200.
Air cooled
Nominal test chamber volume 280
Dimensions
Test chamber outside 1500x2090x1260 mm
Dismantle fan motor and door 1500 x 1940 x 925 mm
Test chamber 720 x 690 x 560 mm
280 liters
Door, clear width 720 x 690 mm
Viewing window, heated 500 x 600 mm
Test room material stainless steel
Temperature range
-40 to +100 C
Heating 3.0 K /min
Cooling 0.6 K /min
Climate range +10 to +95 C
Humidity range 10 to 95
Humidity dif...
3
Here we offer a Heraeus Vötsch climatic cabinet tabletop unit.
Heraeus Vötsch climatic cabinet table unit converted to R452 A
Heraeus Vötsch climatic cabinet VMT 04/16 air cooled
Temperature range from -40°C to 130°C
Temperature constancy in time ± 1°C
Dimensions:
Test chamber: width 310 mm depth 230 mm height 200 mm
Housing: width 430 mm depth 485 mm height 600 mm
Insert dimensions: width 450 mm depth 485 mm height 625 mm
Window insert: 87 X 137 mm plastic
Rated voltage: 220V ± 5% 1/N 50Hz
Rate...
10
Here we offer you a temperature test cabinet.
Housing dimension: width 835 x depth 1410 x height 1680 (mm)
Test chamber dimension: width 550 x depth 445 x height 645 (mm)
observation window: width 300 x height 540 (mm)
Rated voltage: 380V, +-10%, 3/N, 50Hz
Rated power: 9,0 kW Rated current: 13,5 A
Fuse, on-site: 16 A slow-blow
Floor load: max. 150 kg/m²
load per shelf: max. 20 kg
total load per shelf: max. 80 kg
Sound level at 1m distance (free field measurement) 58dB(A)
Temperature test
tempera...
11
Here we offer an Angelantoni / ACS climatic chamber.
Angelantoni / ACS climatic chamber with humidity air cooled
Test frame volume 567 litres
Outer dimensions: width 1100 mm x depth 1705 mm x height 1910 mm
Internal dimensions: width 850 mm x depth 746 mm x height 895 mm
Characteristic values for temperature tests
Temperature range -40°C to +180°C
Maximum rate of temperature change from -40°C to +180°C 3.2 K/min
Maximum rate of temperature change from +180°C to -40°C 2.5 K/min
Heat compensation
...
8
Here we offer a HSR Verfahrenstechnik climatic test chamber.
Water-cooled
The connection to the mains is designed as CEKON plug-in connection.
Technical data:
Dimension of the device (external dimensions) (W/D/H) approx. 1680 x 2180 x 2160 mm
Dimension of the usable space (inside dimensions) (W/D/H) approx. 1400 x 1000 x 1000 mm
Dimension of the door (W/H) approx. 1400 x 1000 mm
Electrical connection: 400 V/3/50/39.00 kW
Connection cable: 5 meters with CEKON plug 63 A
Sound pressure level approx...
8
Here we offer you a CTS temperature test chamber.
Poumf
CTS temperature test chamber
Test chamber volume 350 litres
Test chamber dimensions:
Height 750 mm Width 650 mm Depth 720 mm
Outer dimensions:
Height 1800 mm Width 920 mm Depth 1665 mm
Design: floor-mounted unit
Temperature working range:
Temperature range -40°C/+180°C
cooling speed: 4,0 K/min
Heating speed: 3,5 K/min
Electrical connection: 400V 3/N PE 50 Hz
connected load: 6,6 kW
Rated current: 11,9 A
Condenser chiller: air cooled
Refriger...
8
Here we offer a Weiss temperature test chamber.
Weiss temperature test chamber air cooled approx. 124 liters
Dimensions and design of the test chamber
Inner dimensions height 490 mm width 540 mm depth 470 mm
External dimensions Height 1230 mm Width 780 mm Depth 1112 mm
Lead-throughs in the side walls:
B0oked2lpw
2 pcs, NW 560mm 1 pcs, NW 100 mm
Technical data:
with humidity 15 ... 95%
Temperature range -40°C to +180°C
Temperature change rate cooling: 2.0 Kimin to -10°C
Temperature change rate he...
6
Here we offer a HS simulators temperature cabinet.
Air cooled
Temperature - 40°C to + 100°C
Internal dimensions: Width 550mm Depth 540mm Height 570mm
Control HS
Feed through cable 155mm / 90mm
Bevh7uu0yq
Voltage 400V ,Current 6A ,Power 3,5 kVA
Refrigerant R404a
Type: HS 150 T 40
For you as a buyer for safety the following information!
The following points are carried out on our offered chambers in advance:
1. functional check and exchange of necessary components
2. new filling with legally com...
10
sheet width 4050 mm
plate thickness 6,35 mm
thickness at "Niro-steel" 4,0 mm
cutting angle 0,5 - 2,0 °
cutting gap adjustment 0,05 - 0,8 mm
no. of strokes 10-45 Hub/min
back stop - adjustable 1.000 mm
Control ELGO
oil volume 150 ltr.
engine output 7,5 kW
weight 9500 kg.
range L-W-H 4950 x 1950 x 1680 mm
Furnishing:
- Hydraulic, gate-guided sheet metal shears
- electric backgauge, with ball screws
* with digital ELGO positioning display
* Button for electrical adjustment (creep & rapid traver...
7
travel -x axis 850 mm
travel -y axis 700 mm
travel -z axis 500 mm
control HEIDENHAIN - iTNC 530
number of spindle speeds 28.000 U/min
tool taper HSK-A63
numbers of positions in the tool changer 38
Dsu2soa
rotary table diameter 420 mm
5-axis simultaneous machining center | HERMLE - C 40 U
equipped with ITC (40 bar) & tool changer.
Scope of delivery:
- 3-D Probe
- Internal coolant supply 40 bar contains:
-> standard filter,
-> standard chip conveyor,
-> standard Coolant device,
-> fl...
3
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor
Lia9j
-1x motor: 0.23 kW 18000 rpm at 300 Hz
-Voltage: 165 V
-Recording: saw blade
-Weight: 5 kg
sheet width 4000 mm
plate thickness 13 mm
distance between columns 4200 mm
throat 310 mm
stroke 300 mm
table width 820 mm
table height over floor 1215 mm
Number of downholders 16 St.
cutting angle 0,5 - 2,5 °
Control
total power requirement 30 kW
weight of the machine ca. 27 t
dimensions of the machine ca. 4,8 x 2,65 x 2,85 m
This machine has a light guard on front side and light sensoric on back side.
Machine has a finished part hold up and transport system. Length of cut and
F7ozeudlk
nu...
x-travel 850 mm
y-travel 700 mm
z-travel 500 mm
control 840 D ShopMill Siemens
Main spindle:
turning speed range - main spindle 20 - 18.000 min/-1
power capacity - main spindel 15 / 10 kW
max. Torque 87 / 130 Nm
tool taper SK 40
NC-Tilting round table:
table surface area Ø 800 mm
Swivel range A: +25° / -110 °
rotatable C: 360 °
max. table load 1.400 kg
table speed A:25 / C:65 min/-1
T-slots 14H7
Tool-Presetter:
number of toolpositions 38 pos.
max. tool diameter 90 (125) mm
max. tool len...
sheet width 4000 mm
plate thickness 13 mm
distance between columns 4200 mm
Fn7lthp
throat 310 mm
stroke 300 mm
table width 820 mm
table height over floor 1215 mm
Number of downholders 16 St.
cutting angle 0,5 - 2,5 °
Control
total power requirement 30 kW
weight of the machine ca. 27 t
dimensions of the machine ca. 4,8 x 2,65 x 2,85 m
This machine has a light guard on front side and light sensoric on back side.
Machine has a finished part hold up and transport system. Length of cut and
numb...
10
travel -x axis 850 mm
travel -y axis 700 mm
travel -z axis 500 mm
control Siemens 840 D
number of spindle speeds 18.000 U/min
numbers of positions in the tool changer 38
tool taper HSK-A63
swivable table: (NC) 800 mm
internal coolant system feed 80 bar
5-axis simultaneous machining center | HERMLE - C 40 U
equipped with ITC (80 bar) & tool changer.
Scope of delivery:
- package of tools
Additional equipment:
- Linear axes standard version
- ITC 80 Bar
- Prepared probe Renishaw
- Tool l...
4
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor
-1x motor: 0.23 kW 18000 rpm at 300 Hz
-Weight: 2 kg
Libhx
1
capacity: 790 hl/h
operating pressure: 8 bar
desing temperature: 100 °C
Mxf3dc
3
x-travel 2500 mm
y-travel 2500 mm
z-travel 1000 mm
control Heidenhain TNC 426 PB
table-size 3000 x 1250 mm
distance between columns 2000 mm
rapid travel x/y/z 15/12.000 mm/min
feed 5 m/min
milling head Orthogonal UDG
milling head -swivable +/- 2,5 °
taper ISO 50
spindle turning speed range 50 - 2.000 U/min
transmission ratio 2
Tools changer 10 fach/tools
Internal cooling system 15 bar
spindle drive 30 kW
table weight 10.000 Kg
handwheel HR-410
total power requirement 44 kW
weight of the mac...
15
9
bore capacity in steel (diameter) 40 mm
throat 275 mm
bore stroke 120 mm
spindle taper MK 4
turning speed range 75 - 3200 U/min
190 mm
490 mm
table surface area 700 x 210 mm
connected load frequency 400 V
diameter of hob max. 80 mm
total power requirement 1,1/1,5 kW
Pudeoe
weight of the machine ca. 0,35 t
dimensions of the machine ca. 0,8 x 0,75 x 1,85 m
Drilling and milling machine
- Cross Support
- Cabinet
- Swivel spindle head left / right 90 °
- Feed via hand crank
4
CTS climatic test chamber
Here we offer you a CTS climatic test chamber.
CTS climatic test chamber air cooled
Test chamber volume 350 liters
Test chamber dimensions: Height 750 mm Width 650 mm Depth 720 mm
Outer dimensions: Height 1800 mm Width 850 mm Depth 1640 mm
Test volume: 350 liters
Design: floor standing
Temperature working range:
Temperature range -40°C/+180°C
cooling speed: 4,0 K/min
heating speed: 3,0 K/min
Climatic working range:
Temperature range +10°C to +90°C
Humidity range: +10% t...
8
OPPORTUNITY
0 HOURS IN OPERATION
HIGH PERFORMANCE DEBARKING
FROM 10.2 CM TO 61 CM
ALL TYPES OF WOOD
ALSO CUMMERS
UP TO 12 M LENGTH
WITH REINFORCED FEED SERIES 10.000 LYNCON
74.6 KW MOTOR
WITH 2 DROPS
COMPLETE HYDRAULIC SYSTEM
B8lnkn8jig
8
CNC FANUC series 16-TT - diameter of the plate : 3500 mm - Height of frame with tray : 1150 mm - Height of the tray surface above the ground : 150 mm - Part height : 2000 mm - Passage diameter : 4000 mm - Traverse trolley : 2200 mm - Right orientation ; 30° - Left orientation : 30° - displacement of the tool holder slide outils (right) : 1250 mm - displacement of the tool holder slide (left) 1250 mm - Max displacement of the side carriage : 1500 mm , max table load 40.000 kg, 80 rpm, hydrostatic...
15
Dzmgby
15
Dfqesyzi8
10
bore capacity in steel (diameter) 40 mm
throat 275 mm
bore stroke 120 mm
spindle taper MK 4
turning speed range 75 - 3200 U/min
190 mm
490 mm
table surface area 730 x 210 mm
connected load frequency 400 V
boring feeds: 0,1 - 0,18 - 0,26 mm/U
total power requirement 1,1/1,5 kW
weight of the machine ca. 0,35 t
dimensions of the machine ca. 0,8 x 0,75 x 1,85 m
Drilling and milling machine
- Cross Support
Vvv3s3
- Cabinet
- Swivel spindle head left / right 90 °
- Feed via hand crank