Bernardo twin band saw MITRE MBS 300 DG-V PRO
Technical specifications
Cutting capacity round / square 90 ° 255 mm / 210 x 210 mm
Section flat 90 ° 310 x 210 mm
Cutting capacity round / square 45 ° R 220 mm / 210 x 210 mm
Section flat 45° R 220 x 200 mm
Cutting capacity round / square 45 ° L 230 mm / 200 x 200 mm
Section flat 45° L 230 x 200 mm
Cutting capacity round / square 60 ° R 135 mm / 135 x 135 mm
Section 135 x 135 mm flat 60 ° R
Working height 930 mm
Band saw blade dimensions 2750 x 27 x...
Horiz. Miter bandsaw, double miter bandsaw BERNARDO type MBS 315 DG-VR PRO
Band saw for metalworking with swiveling saw bow.
New machine from year of manufacture 2022
sawing range at 90° round Ø 255 mm
sawing range at 90° square 230 x 230 mm
sawing range at 90° rectangle 315 x 230 mm
Sawing area at 45° round Ø 195 mm
Sawing area at 45° square 195 x 195 mm
Sawing area at 45° rectangle 195 x 230 mm
Sawing area at 60° round Ø 115 mm
Sawing area at 60° square 115 x 115 mm
Sawing area at 60° recta...
Band saw machine
Make: METALLKRAFT
Model: BMBS 300 x 320 HA-DG
Art.no.: 3690041
Condition: New machine
cutting range (round): 300 mm
belt speed: 20-100 m/min, infinitely variable
Cfpzebnkvd
standard equipped with:
- Fully hydraulic, semi-automatic version.
after starting, the machine clamps automatically
after the end of the cut, it returns to the starting position
stops the saw band and opens the vice.
- Cutting probe for automatic detection of material height
- Horizontal vice, mec...
Dimensions LxWxH: 1.8x0.95x2.1m
Net weight: 650kg
Cutting area round: 300mm
Miter device: +60 to -45 degrees
Cdzcxo9bhy
miter device: +60 to -45 degrees
AVAILABLE FROM STOCK Technical specifications Cutting range around 0 degrees 300 mm Cutting area rectangle 0 degrees 320x300 mm Cutting range around -45 degrees 300 mm Cutting range around -60 degrees 200 mm Cutting range around +45 degrees 270 mm Dimensions LxWxH 1.8 x 0.95 x 2.1 m Weight 650kg SCOPE OF DELIVERY saw band operating tool Length s...
belt width: 150mm
B0qb7spuw7
belt length: 3000mm
table size: 960mm x 350mm
table for rounds: 330mm x 330mm
veneer grinding unit: ja
oszillation: ja
grinding unit tiltable: ja 90° - 45°
suction connection: 120mm
motor power: 3 kW
machine length: 1910mm
machine width: 840mm
weight: 330kg
Bernardo edge sanding machine KSM 3000 C with veneer sanding device
Technical specifications
working table 960 x 350 mm
table height adjustment 210 mm
belt length 3000 mm
belt width 150 mm
sanding belt back 1060 x 200 mm
sanding unit swivelling 90° - 45°
belt speed 20 m/sec.
additional table 330 x 330 mm
Oscillation stroke 20 mm
Oscillation motor 0,25 kW (0,34 PS)
Be79w2qslk
suction connection Ø 120 mm
Motor output power S1 100% 3,0 kW (4,0 PS)
Motor input power S6 40% 4,5 kW (6,0 PS)
Voltage 40...
Bernardo Abricht - and thick-planing machine
ADM 300 - 400 V/ 3.0 kW
Technical specifications
Abrichthobel
Dressing width 305 mm
Table length 1510 mm
Table height 915 mm
Planing shaft speed 5500 rpm
Planing knife 4 pcs.
Planshaft diameter 78 mm
Dressing stop 1105 x 155 mm
Dressing stop swivel90° to 45°
Max chip removal 3 mm
Dickenhobel
Table length 585 mm
Planing width 300 mm
Thickness pass min./max. 3 - 220 mm
Max chip removal 3 mm
Feed speed 6.6 m/min
Suction connection of 100 mm
Engine power ...
Belt conveyor, troughed belt conveyor, troughed belt conveyor GASUS type DG 300-5/2,75
belt conveyor, conveyor belt, belt conveyor
Fabrig No: D-7321915 Year of construction 1996
useful length: 2,75 meter
belt width: 230/300 mm
Deflection roller diameter: 210 / 230 mm (rubberized drive roller)
deflection roller width: 400 mm
belt speed: approx. 15 meters/min.
motor power: 0,75 kW
Mains connection: 400 Volt, 50 Hz
- Drive via SEW gear motor
- Feed hopper 550 x 430 mm
B9vus7v90j
- Metal support rol...
cutting diameter max. 255 mm
saw band length 2.750 mm
width of saw-band 27 mm
dimensions of saw-band 2.750 x 27 x 0,9 mm
cutting angle - 60° / + 45 °
band speed 35 / 70 m/min
Cuttingrange 90° max. 255 mm
capacity 90 degrees: square 190 mm
capacity 90 degrees: flat 190 x 310 mm
capacity 60 degrees: round 135 mm
capacity 60 degrees: square 135 mm
capacity 60 degrees: flat 135 x 135 mm
capacity 45 degrees: round 220 mm
capacity 45 degrees: square 190 mm
capacity 45 degrees: flat 135 x 190 mm
total ...
cutting diameter 255 mm
cutting width 310 mm
capacity 90 degrees: flat 310 x 190 mm
Ffxrztod
capacity 90 degrees: square 190 mm
capacity 45 degrees: round 215 mm
cutting speed 35 / 70 m/min
engine output 1,5 kW
weight of the machine ca. 0,335 t
dimensions of the machine ca. 1,5 x 0,8 x 1,5 m
Offer 22649
Technical data:
- Saw blade dimension 2920 x 27 x 0,9 mm
- 2 cutting speeds approx. 30 + 60 m/min
- manual lifting + lowering of the saw frame
Bd30ggf8
- Machine table left + right tiltable for miter cuts
- Cutting range approx.
- at 90° round 270 mm
- flat 300 x 150 mm
- at 45° around 210 mm
- max. opening width of the vice 310 mm
- coolant device
- drive 400 V / 2,65 / 3,2 kW
- space requirement approx. W 900 x H 1500 x D 1600 mm
- weight approx. 400 kg
format table length 3200 mm guiding on steel rods
cutting width 1300 mm
cutting on transverse fence 3200 mm
undercutter is present
inclination and lifting of the saw blade 90°- 45°
Mydpyc
power 5.5 kW
turning length 3000 mm
turning diameter 660 mm
turning dia. in gap 900 mm
turning diameter over slide 460 mm
turning speeds 25 - 1600 U/min
quill: 5 MK
quill travel 235 mm
spindle bore 105,0 mm
engine output 7,5 kW
spindle taper DIN 55029 D 1-8
weight of the machine ca. 3.300 kg.
dimensions 4.630 x 1.200 x 1.529 mm
scope of delivery :
- 3-axis digital display ES-12 V with LCD display
- slip clutch
- Rapid traverse lengthways and flat
- LED machine light
- 3-jaw steel chuck PO3-315 mm / D8
- ...
Vertical machining center serial. BRIDGEPORT type interact 412
Masch.# 73440A year of production 1988
Drtvg3h7i
Technical data:
Table size 840 x 320 mm
Traverse path x 450 mm
Travel Y 310 mm
Z stroke 300 mm
maximum table load 250 kg
Spindle speed 40-4000 RPM.
Spindle carrier ISA 40
Feed range 0-4.5 / 7.5 m / min.
Rapid traverse 12 m / min.
Number of tools in the changer 12
Max tool diameter 75 mm
maximum tool length 250 mm
maximum tool weight 6.0 kg
Tool change time 8.0 seconds.
Power 5,5 / 3,7...
Roller conveyor RB 10 - 3000 A
Technical specifications
web length 3000 mm
Ql2dx
roller width 360 mm
Roller diameter 60 mm
Height adjustment 620 - 1055 mm
Load capacity, max. 900 kg
Standpipe diameter 50 mm
Weight approx. 70 kg
Features
Fold-up material stop, can be used either on the right or left side
Height-adjustable, galvanized steel tubes with compensating feet
The frames of the roller conveyors consist of a stable U-profile
Problem-free and efficient material transport for feeding and dis...
Roller conveyor / roller table RB 10 - 3000
Technical specifications
web length 3000 mm
roller width 360 mm
Roller diameter 60 mm
Height adjustment 620 - 1055 mm
Load capacity, max. 900 kg
Standpipe diameter 50 mm
Dimension (L x W) 3000 x 450 mm
B8a8fftfts
Weight approx. 66 kg
Properties
The frames of the roller conveyors consist of a stable U-profile
Problem-free and efficient material transport for the supply and removal of workpieces
Safe workpiece support due to solid and heavy-duty galvaniz...
Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp
Ihqvnlkh
-Stroke: 300 mm
-Piston: Ø 40 mm
-Piston rod: Ø 16 mm
-Total length: 522 mm
-Total length extended: 822 mm
-End position cushioning: adjustable on both sides
-Dimensions: 70/64/H522 mm
-Weight: 4.65 kg
Dimensions LxWxH: 3.6x1.13x2.7m
drive power: 4.0 KW
max. cutting range round: 460 mm
Miter device: +60 to -45 degrees
max cutting area rectangle: 600x460 mm
Net weight: 650kg
Be2yhnd
Cutting area round: 120mm
miter device: +60 to -60 degrees
For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic With fully hydraulically controlled sawing functions Saw band drive with low-maintenance, oil-lubricated worm gear With robust three-pha...
We are selling a 2K mixing and metering system for processing reactive resins. The plant was last used in 2017.
The plant is very well maintained, cleaned and in working condition.
The technical equipment to be provided as a data sheet.
Operating instructions and technical documentation available.
2x stainless steel container 70/70 litres + 1x agitator with interval control
Discharge capacity approx. 4.0 kg / min
Pneumatic mixer drive + plastic static mixer
Cgws8yniaa
Gear pumps for A and B com...
For sawing tubes and solid materials made of stainless and tool steelTwo band speeds by means of pole-changing motorRobust gear with hardened and ground shaftPrecise and robust band guides with adjustable carbide platesLonger service life of the saw band due to saw arm inclination of 25°Efficient coolant application to the saw band guidesElectromechanical monitoring of the saw band tension, In case of deviations, a microswitch switches off the machine chip clearing brush for optimum cleaning and...
Good condition.
Ready for immediate use
Dimensions and weights
Length approx. 1610 mm
width/depth approx. 890 mm
Height approx. 1950 mm
Weight approx. 320 kg
Electrical data
Supply voltage 400 V
Mains frequency 50 Hz
Machine data
Saw band speed(s) 35 / 70 m/min
Speed levels 2
Cfvzdgkk7i
Saw band length 2720 mm
Saw band width 27 mm
saw band thickness 0,9 mm
Material feed
Table height material feed 787 mm
Cutting range
0° round (tube) 230 mm
0° round (solid material) 150 mm
0° rectangular lying (...
belt width: 150mm
belt length: 2600mm
oszillation: ja
sanding rollers for rounding: 1
grinding unit swiveling: ja
table size: 750mm x 290mm
suction connection: 120mm
motor power: 3kW
Vn9ekopx
machine length: 1700mm
machine width: 700mm
weight: 180kg
The KSM 2600 edge sanding machine is equipped as standard with a sanding belt oscillation with separate gear motor. The sanding unit, which can be quickly adjusted from 90° to 45°, enables the sanding of straight and angled edges.
Working table: 750 x 290 mm
table height adjustment: 185 mm
belt length: 2600 mm
belt width: 150 mm
sanding belt back: 850 x 200 mm
sanding unit swiveling: 90° - 45°
belt speed: 20 m/sec.
additional table: 330 x 330 mm
oscillation stroke: 20 mm
oscillation motor: 0...
belt width: 150mm
belt length: 2260mm
veneer grinding unit: nein
oszillation: ja
weehl diameter: 115 mm
grinding unit tiltable: ja / 90° - 0°
working table: 750 x 250 mm
seperate table: 300 x 245 mm
belt speed: 16,3 m/sek.
suction connection: 100mm
motor power: 3 kW / 400V
machine length: 1270mm
C2kaihf3
machine width: 600mm
weight: 120kg
Strip width: 150mm
Belt length: 2740mm
veneer sanding device: no
oscillation: yes
roller diameter: 115 mm
Grinding unit swivels: yes / 90° - 0°
worktable: 900 x 305 mm
additional table: 290 x 260 mm
Belt speed : 16 m/sec. m/sec.
Suction connection : 100mm
P83nx
Motor power : 3 kW / 400V
Machine length: 1540 mm
Machine width: 750 mm
Weight: 220 kg
Code: 0806
Brand: HIRZT - ITALIA
Model: B 300 - CE Standard
Automatic edge bander for pre-glued edges in strips or rolls: melamine, plastic laminates, veneer, etc . up to 3 mm thickness - CE Standard
Composition:
Motor V. 220 single-phase
Pneumatic end cutting unit (shear) front and rear
Blower with air filter - Power 440 W
Trimming copying unit with adjustment from the outside - Motors 220 x 2 W - Trimmer speed rpm 10000
End cutting finishing unit with foot control
N° 20 rollers inclined ...
Many of our machines are available from stock. Call and ask to find out more.
CNC plasma cutting machine PCO-3020-DG
Bqjozijb
The machine was engineered and manufactured in Poland.
Working parameters:
- XY operating range (working area): 2020 x 3100 mm
- Clearance between table and gantry: 240 mm
- Maximum cutting tube height: 200 mm
- Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min.
- Compatible with Hypertherm Powe...
description
Optimal solution for sanding workpiece up to 300 mm.
* constant tape tension by pneumatic
* use hole sanding belt because of height adjustable table by spring pressure (also for safe work with small workpieces)
* different sanding belt sizes on demand!
motor power:
3 kW
size of sanding belt:
300 x 2280 mm
speed of belt:
X7gqgzh8
11 m/sec.
table size:
ca. 350 x 700 mm
required place:
ca. 1250 x 750 mm
weight:
280 kg
Tooth edge deburring machine make RAUSCH type GRATOMAT GR 300 HV - HORI - FB,
special machine for left and right spiral bevel pinions / soft
machine # 4337, year of construction 1998
Technical data:
Milling unit:
- Hydropneumatic, retracting with additional pneumatic slide.
(110 mm fast feed stroke, 50 mm working stroke)
Pneumatic milling spindle:
- 950 mm rpm
Gyy2hc
- Right or left rotation
Brush unit:
- Hydropneumatically retracting
- stroke 0 - 100 mm
- 1,1 kW
- 2800 rpm
- Collet diamete...
edge banding machine Felder G 300, year of construction 2008, cross cut saw unit, polishing unit, glue pot, flush trimming unit, edge thickness 0,4 - 3,0 mm, work piece height 10 - 45 mm, with support plate, with spare feed belt, last maintenance March 2021 from Felder according to previous owner
Tpmmusvx
Cutterdredger – Year 2012 – Length cutter-leader 12 meter – Max dredging depth 10 meter – 2 X hydraulic spuds – 1 X Detroit engine 12 cilinder (400 hours) C – 1 X Volvo engine type TAMD121C for the hydraulics. – Warman dredge pump 12/10 (300/250mm)
Edbk79ncq
Nr. 5009:
Bx3d3mstgc
1 gebr. Kugeldrehgerät / Kugeldrehapparat
Fabr. ELKA / Lothar Kretz Tübingen
Typ KDG 1300 / Größe 1
in Original Holzkiste
Arb.-Ber.: Ø 0-80 / 125 mm,
3 Stahlhalter für verschiedene Ø
Beschreibung
Holzkiste ca. 300 x 200 x 100 mm
Gewicht ca. 8 kg
It is a highly efficient automatic hydraulically controlled band-saw with servo controlled multiple material feed with optional regulation press of vice – set of 2 pcs for both vices.
The machine is designed for vertical and angular cuts.
Angles setting (turning of the bow) manualy:
- fluently between 0° and +45°right in automatic mode
- fluently between 0° and +60°right in semi-automatic mode
Cutting parameters
One feed step of the material max - 500mm
One feed step of the material Min -3mm
A:...
Ex works price (EXW incoterms)!
Suvaek
HMI is not reperable, we sell the machine as defect / Sparepart.
Sindle is nearly new one less then 300h runtime.
Glass thickness: up to 50 mm feed speed adjustable via CNC control 20 kW 380 V 45 A 50 Hz Pneumatic supply: 7 bar Hydraulic supply: 2.5 bar Air consumption (liter / min): 400 Water consumption (liter / min): 6.5 Weight: 8,100 kg
Including programming station and I-Cam programming software
Including a lot of tools
Two column band saw machine
Raising and lowering of saw frame with ball screw spindle with automatic speed control
Control panel
Hydraulic workpiece clamping
Nah2mt
Servo controlled angle rotation
Automatic feed
Control: Fully automatic
Degree-measuring system: Digital
Belt speed: 15-150 m/min
Cutting angle (degrees): 0-60° L; 0-45° R
Cutting capacity rectangle: 500 x 335 mm
Cutting capacity Round: 335 mm
Sawing band dimension: 4400x34x1,1 mm
MEBA ECO 410 DGA-130 CNC
-control by siemens (any settings possible
-cutting diameter 410mm
B8f09s0vnz
-size 620x410
-twisting left/right
-feed max 1300mm x 999(times)
(more data on one of the pictures)
-double cooling system (spray + coolant pump)
-package docking system
-automatic chip conveyor
-belt 5800x41x1.3
net price
weight about 3 t
-possibility to transport in any bowl in the country
-price includes 10 pieces of original German belts + some new service parts (bearings, belts, pinions, b...
Here we offer an HPLC system.
As you know, UHPLC offers numerous advantages – shorter analysis times, higher resolution, lower operating costs.
Jzompgdy
In recent years, the apparatus solutions for UHPLC have become increasingly sophisticated and therefore more expensive,
That's why many HPLC users are still reluctant to use this technology.
Thanks to Dionex, this has now come to an end. At Dionex, you now get the full power of UHPLC
For the price of a traditional HPLC system.
At Dionex, we stri...
Traces of use: Slight traces of usage
Guarantee in months: 12
Ipb77som3
Case: slight scratches, slightly soiled
Diameter Of Pitch Circle: 51,5 mm 4 x 5,5 / 10 mm
Product condition: Used from old Stock
Item No.: DG4V-3-2C-U-D-10-S300+D
through-put width 580 mm
working heigth 615 mm
discs 570 x 260 mm
Air consumption 400 l/min.
air pressure 2,7 - 5,5 bar
Vqmt9g32
weight 125 kg
Box Width 1200 mm
Furnishing:
- Working space: 1220 x 615 x 580 mm LxWxH
- Jet head (grain size 0.149 - 0.250 mm can be used)
- Container for blasting material
- dust extraction
- foot switch
- Lighting in the work area
- Operating instructions in German
We make it easier for you to find: "bernardo mbs 300 dg"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
The Werktuigen Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Werktuigen. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.