We offer here a used
rear wall grille for sale.
Included in delivery are:
01x back wall grille, used
material color: sendzimir galvanized
total width: approx. 2.200 mm
total height: approx. 2.000 mm
mesh size: approx. 95 x 45 mm
0mymypfr
Frame profile dim. Width: 30 x 30 mm
Frame profile dim. Height: 25 x 20 mm
Wire thickness: approx. 1.25 - 1.50 mm
General information about the article:
This item is offered for pickup only. A desired transport or a shipment of this article is associated with ad...
The BWA 45 is suitable for the production of caseless sausage (e.g. Oberländer, wool sausage, naked sausage.) dumplings and buttons. The filling machine is equipped with a portioning unit and clamping tongs. The portioning unit and the clamping tongs are controlled by separate pressure cylinders.
Funnel 45L
Connection 6bar compressed air (200L / min)
Weight range 10g-370g
Oxduv
Year of construction: 2008
We offer here a used
rear wall grille for sale.
Included in delivery are:
01x back wall grille, used
material color: sendzimir galvanized
total width: approx. 1.900 mm
total height: approx. 500 mm
mesh size: approx. 95 x 45 mm
Frame profile dim. width: 30 x 30 mm
Frame profile dim. Height: 25 x 20 mm
Wire thickness: approx. 1.25 - 1.50 mm
General information about the article:
This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional co...
We offer here a used
rear wall grille for sale.
Included in delivery are:
01x back wall grille, used
material color: sendzimir galvanized
total width: approx. 1.100 mm
B7ylhq7gzc
total height: approx. 500 mm
mesh size: approx. 95 x 45 mm
Frame profile dim. Width: 30 x 30 mm
Frame profile dim. Height: 25 x 20 mm
Wire thickness: approx. 1.25 - 1.50 mm
General information about the article:
This item is offered for pickup only. A desired transport or a shipment of this article is associated with ad...
Type of fuel: Diesel
Field of application: Construction
Cg2ebvlhc2
Make of engine: Yanmar 4TNV98TGGEH
Generator capacity: 45 kVA
Generator: Stamford
Frequency: 50
Voltage: 230
Please contact Sales Department for more information
sheet width 2500 mm
plate thickness 45 mm
pre-bending 40 mn
number of rolls 4 Walzen
diameter of upper rolls 550 mm
roll diam. bottom roll 450 mm
speed 1 - 4 m/min
total power requirement 66,0 kW
weight of the machine ca. 44,0 t
dimensions of the machine ca. 6,25 x 2,95 x 3,05 m
Basic equipment:
- Conical bending device
- Swiveling top roller
- Electrically adjustable rear roller
- Conical bending device
- driven top roller
- Pre-bending device
- brake motor
- Safety device emergency leash
- ...
sheet thickness: 45bending length: 3100upper roll diameter: 510
Technical specifications:
Fb8eqh9
- Hardened and polished rolls
- Complete body made of ST-52 Steel
- Machine have 4 rolls and designed for symmetrical working principle
- Hydraulic powered cover for easy material extracting
- Digital readout for side rolls (2 digital readout)
- Side rolls are free for rotation and upwards downwards movements are hydraulic powered
- Top and bottom rolls are driven by hydraulic and gearbox. Bottom ro...
Bending tool, die, lower knife, lower tool, prism tool
-Tool: for press brake
-Prisms: 90° 5/8/9/12 mm
-Square: 54 x 45 mm
-Length: 2550 mm
Qldylrhrk
-Weight: 70 kg
diameter: 400 mm
passage: 25 mm
width: 58 mm
revolution per minute: 1800 U/min
weight of the machine approx.: 48 kg
dimensions L x W x H: mm
Kraftspannfutter, mechanisch; Kraftspannung 40kN
Merkmale:
Kraftflansch AKS 315/5
Spannbereich min./max.: 60/240mm
Flanschaufnahme Größe Ø 300x5mm; Befestigung 3x Innensechskantschrauben Ø 20mm und 3x Bohrungen Ø 20,5mm / Teilkreis Ø 235mm
Qag8b
eine Backe ist gebrochen
sheet width 2000 mm
plate thickness 45 mm
pre-bending 40 mn
number of rolls 4 Walzen
diameter of upper rolls 500 mm
roll diam. bottom roll 400 mm
speed 1 - 4 m/min
total power requirement 60 kW
weight of the machine ca. 33,5 t
Qliuimzz
dimensions of the machine ca. 5,65 x 2,85 x 3,0 m
Basic equipment:
- Conical bending device
- Swiveling top roller
- Electrically adjustable rear roller
- Conical bending device
- driven top roller
- Pre-bending device
- brake motor
- Safety device emergency le...
sheet thickness: 45bending length: 3100upper roll diameter: 480
Technical specifications:
- Hardened and polished rolls
- Complete body made of ST-52 Steel
- Machine have 4 rolls and designed for symmetrical working principle
- Hydraulic powered cover for easy material extracting
- Digital readout for side rolls (2 digital readout)
- Side rolls are free for rotation and upwards downwards movements are hydraulic powered
- Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll&rsquo...
Press capacity: 45 ton
Ram stroke adjustable: 10 - 40 mm
Slide adjustment: 50 mm
Shut height (stroke down, adjustment up): 220 - 300 mm
Free frontal opening L-R: 560 mm
Table surface area : 550 x 450 mm
Slide area: 550 x 360 mm
Hole in table: 450 x 100 mm
Number of strokes: 100 - 500 s.p.m.
Required power: 7,5 kW
Bb83j7vi2l
Weight of machine approx.: 6,2 ton
Electric motor, three-phase motor
-Power: 5 kW
-Speed: 1450 rpm
-Shaft: Ø 32 mm
-Construction: B5
-Protection class: -
-Price: per piece
-Number: 1x available
-Dimensions: 440/360/H305 mm
-Weight: 69 kg
Wedufdm7d
Cabin
ref: 322402 without auxiliary hydraulics, full cab with sliding doors, heating, 1 x LED working lights front, 1 x LED reversing lights rear, lighting system with parking and driving lights, brake lights and indicators, flashing light, warning sound when reversing, table width: 1200mm, driver's seat air suspension (fabric cover), single pedal, joystick operation, front and rear camera, searchlight rotating Capacité de levage: 6tonnes Encombrement en hauteur: 3.2m Levée libre: 1.895m Largeur...
bending length: 3100sheet thickness: 45upper roll diameter: 510
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hydraulic p...
Field of application: Construction
EPA Marked: yes
Bucket type: Excavator bucket
Please contact Kristoff Van Havere for more information
- Complete line for machines from 0,8 until 35 ton
- More than 800 buckets in stock
B9uo89n
- CW quick hitch adapter
Bending tool, die, upper knife, upper tool, deer foot tool
-Transfer in current condition as seen
-partially damaged
-Tool: for press brake
Yqmjlo
-Tool radius: mm
-Dimensions: 45 x 202 mm
-Length: 3150 mm
-Weight: 158 kg
sheet thickness: 45bending length: 2100upper roll diameter: 430
Technical specifications:
- Hardened and polished rolls
- Complete body made of ST-52 Steel
- Machine have 4 rolls and designed for symmetrical working principle
- Hydraulic powered cover for easy material extracting
- Digital readout for side rolls (2 digital readout)
- Side rolls are free for rotation and upwards downwards movements are hydraulic powered
- Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll&rsquo...
Bending tool, die, upper knife, upper tool, straight tool
3v8wzyrf
-Tool: for press brake
-Tool radius: 10 mm
-Dimensions: 45 x 190 mm
-Length: 3000 mm
-Weight: 240 kg
sheet thickness: 45bending length: 2600upper roll diameter: 460
Technical specifications:
- Hardened and polished rolls
- Complete body made of ST-52 Steel
- Machine have 4 rolls and designed for symmetrical working principle
- Hydraulic powered cover for easy material extracting
- Digital readout for side rolls (2 digital readout)
- Side rolls are free for rotation and upwards downwards movements are hydraulic powered
- Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll&rsquo...
Painting-finishing line with spraying machine, for panels, max working width mm 1300
Dimensions of the line: length 53.580 meters (ca.) x width 8.660 meters (ca.)
Composed of the following machines:
a) Motorized belt transfer "CEFLA" Mod. TNS 3650 / RBT
b) "SORBINI" brushing machine Mod. SmartClean 34/AC-R
c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure
d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU2WP, with 4 + 4 spraying guns
e) Motorised belt tra...
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool
-Tool: from press brake EHT type EHP 11-40
-Measures: see drawing in the photos
Bvon7lak3r
-Dimension: 4050/45 / H130 mm
-Weight: 147 kg
Model: Single Screw PS/PP Extrusion Line
Year: 2012
Condition: Excellent
Availability: Immediately
Materials: PS-PP grnulate
Material Width Range: 0.18mm – 1,2mm
Max Sheet Width: 750mm
Output: 350kg/hour
Main Extruder: 105mm single screw extruder air cooled 120kW ac motor & inverter
Co-Extruder-1: 65mm single screw with 30kW ac motor & inverter
Co-Extruder-1: 45mm single screw with 20kW ac motor & inverter
Running from 0.18mm to 1.2mm thick PS/PP up to 450kg/hr.
Chuervdyu3
Mix of virgin an ...
Immediately available from location CH :
CNC press brake LVD
Type PPEB 2500 / 45
Year of manufacture 1990
Pressure capacity 250 to
Working length 4520 mm
column passage 2500 mm
stroke 250 mm
Closing speed mm/ s 120
Working speed mm/s 21
Return speed mm/s 200
Q8ejb
Drive 30 kw
Crowning device
Weight 17 to
Complete upper - lower tools
At the price of Euro 17.500.---plus VAT ex location
Rotary transfer machine PFIFFNER HB 32 - 45/16
Manufacturer: Pfiffner
Type: HB 32/45
Year of manufacture: 2002
Control: Siemens
Bg3fylf8
Technical data:
Number of stations: 16
Hydraulic oil quantity: approx. 120 liters
Scraper belt conveyor Knoll:
Type: 450 K-1/2000
Year of construction: 2002
Area requirement: 10,0 x 5,0 x 3,2m
Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter
Busfjwv3
-Mann air filter housing
-Inlet/outlet: Ø 39/39 mm
-Part Number: 45
-Price: per piece
-Number: 2 pieces
-Dimension: Ø 173/165 mm
-Weight: 1.8 kg
The Werktuigen Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Werktuigen. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.