Field of application: Internal logistics
Lifting capacity: 1.300 kg
Lift height: 266 cm
Clearance lift height: 150 cm
0qyqhle9
Maximum passing height: 195 cm
Technical condition: very good
Visual appearance: very good
Fork carriage: Sideshifter
Please contact Pieter de Vries for more information
ruwterreinheftruck
Field of application: Internal logistics
Empty weight: 4.329 kg
Cfgzleax9p
Lifting capacity: 2.500 kg
Lift height: 378 cm
Maximum passing height: 210 cm
Technical condition: very good
Visual appearance: very good
Fork carriage: Sideshifter
Please contact Martijn Krommenhoek for more information
Persons Basket
Capacity: 300kg
Load Centre: 400
Overall Length: 800mm
Overall width: 1200mm
Nsqhl
Overall weight: 125kg
YOM: 2019
Condition: very good
Description: Der Arbeitskorb bietet Sicherheit bei Reparatur- und Wartungsarbeiten an hochgelegenen Gebäudeteilen. Mit Steckbolzensicherung gegen Abrutschen von den Lastgabeln. Euínfahrtaschen 620 x 180 x 90 mm
RMS Vibration Test System
Here we offer you a RMS electrodynamic vibration test equipment.
Technical data:
Sine: 10 KN
Noise: 10 KN
Shock: 20 KN
Mass of the vibrating system (DYN) : 13.3 kg
Main resonance(unloaded) typ . 2,5 kHz
Max amplitude: sine 18 mm
Noise, shock 26 mm
Max velocity: sine 2 m/s
Noise, shock 3.5 m/s
Max acceleration sine:
oscillating system unloaded : 782m/s²
Additional load 30 kg 231 m/s²
Additional load 50 kg 158 m/s²
Cgwxhry8kl
Max. Acceleration noise:
Additional ...
This AUSA Dumper is the D 1000 AP model from 2016.
Length: 4m 60
Width: 2.40m
Height: 2.75m
Weight: 4545 Kg.
Tire size: 500/60-22.5
Vv3r23
Tilting front unloading system
Bucket capacity to the brim: 3750 liters
Dump capacity in dome: 5225 litres.
Load capacity: 10,000 kg.
Maximum speed: 32 km/h
Kubota V3800-CR-TI-EF02 engine of 83.5 kW (113 hp).
1278 Hours
General information
Field of application: Construction
Technical information
Power: 23 kW (31 HP)
Chassis type: rigid
Empty weight: 2.400 kg
Drivetrain
Type of fuel: Diesel
Drive: Wheel
Make of engine: Kubota V-1505
Performance
Top speed: 20 km/h
Functional
Lifting capacity: 1.350 kg
Lift height: 400 cm
Maximum reach: 400 cm
Condition
General condition: very good
Technical condition: very good
Bzb083omml
Visual appearance: very good
Other information
EPA Marked: yes
Additional information...
Field of application: Internal logistics
Empty weight: 4.329 kg
Lifting capacity: 2.500 kg
Lift height: 378 cm
Jcgqixv
Maximum passing height: 210 cm
Technical condition: very good
Visual appearance: very good
Fork carriage: Sideshifter
Please contact Martijn Krommenhoek for more information
Vehicle description
Diesel all-wheel drive dumper AUSA D600 AHG
year 2007
acc. Counter 1.667 hours
60,5 KW Kubota engine
6.000 KG Payload
4.380 KG Own weight
215cm overall width
All wheel
Joystick control
Rotating trough
Selling price: 16.500,-- net
Gmclsqm
Also favorable delivery possible !!!
Here we offer you a vibration test system.Test Manager SWR 900Control cabinet SWS 200-10Vibration exciter SW 1508/1Hydraulic supply SWT 1110/11Power amplifier TGA sound insulation housing SWG 211/1Fan SWG 103Operating hours: approx. 1,300 hoursCondition: used / usedScope of delivery: Vibration test system as shown(Changes and errors in the technical data, specifications reserved!)We are happy to answer further questions for you on the phone.
Bjimvh8wq
Offered is a shaker system from RMS, water cooled, consisting of:
1 junction box (fuse box to be mounted on wall)
2 control cabinets (water cooling and amplifier, each approx. 250kg)
1 shaker (2200kg)
1 sliding table (450kg)
1 lifting expander (50kg)
1 Angle for test part support horizontal shocks (25kg)
Connected load: total 30-35 kVA
Required cooling water: Optimal: 15°C-20°C, water quantity approx. 25L/min, 3 bar
Compressed air: 6bar for weight compensation and center suspension
Sine power:...
General information
Field of application: Construction
Technical information
Power: 23 kW (31 HP)
Chassis type: rigid
Empty weight: 2.400 kg
Drivetrain
Type of fuel: Diesel
Drive: Wheel
Make of engine: Kubota V-1505
Performance
Top speed: 20 km/h
Functional
Lifting capacity: 1.350 kg
Lift height: 400 cm
Jwkey3
Maximum reach: 400 cm
Condition
Technical condition: very good
Other information
EPA Marked: yes
RMS Vibration Test System
Here we offer you a RMS electrodynamic vibration test equipment.
Technical data:
Sine:7,5 KN
Noise:6,7 KN
Shock:13 KN
Displacement pk-pk:26 mm
Speed:
Sine 1,5 m/s
noise 2,5 m/s
Shock 2,5 m/s
Acceleration:100g
Cooling:air cooled
Type : SW 3509 + amplifier TGD 6000-000.00 and fan
Yuuw3k
total weight ca 4000kg
Condition: used / used
Scope of delivery: (see picture)
(Changes and errors in technical data, specifications are reserved!)
Further questions we can answer on the...
RMS Vibration Test System
Here we offer you a RMS electrodynamic vibration test equipment.
RMS Vibration Test System
24kN sine wave
20kN noise
28kN shock
Displacement: 1,5"
Headexpander (Magnesium) 50kg Clamping surface: 800x700mm with 50x50mm grid, M8
Angle for specimen mounting (25kg) (for use with high performance horizontal shocks, 230x230mm, M8)
The system was upgraded in 2021 to run higher performance:
The water cooling system has been upgraded with a plate heat exchanger for better heat...
RMS vibration exciter with power amplifier and cooling fan
Here we offer you a RMS vibration exciter with power amplifier.
Vibration exciter SW 1507
Bscgzmwxqh
Max force 2158 N
max. speed 1,3 ms
Power amplifier TGA 1500
3 x 380V/ 50Hz/ 35A / 8 kVA
Condition: used / used
Scope of delivery: (see picture)
(Changes and errors in technical data, specifications are reserved!)
Further questions we can answer on the phone for you.
Written order possible by email or fax
RMS Vibration test system
Here we offer you a RMS electrodynamic vibration test system.
RMS Vibration Test System
Test Manager SWR 900
Vibration exciter SW 3006
30V-50A-3434 N
power amplifier TGA 3000-000.00
Condition: used / used
Untested! Tests were not possible
Scope of delivery: (See picture)
Bskfqugls8
(Changes and errors in the technical data, data are reserved!)
Further questions we can answer on the phone for you.
Written order possible by email or fax
Here we offer electrodynamic vibration unit a RMS.
RMS electrodynamic vibration equipment
Test Manager SWR 900
Subrack SWE 348
Charge amplifier SWE 366
Ckxx92mz
Charge amplifier SWE 366
PSU SWE 350
Type: Test Manager SWR 900
Condition: pre-owned / used
Scope of delivery: (See image)
(Errors and omissions in the technical data, information are reserved!)
We can answer questions on the phone for you.
Written order possible by email or fax
RMS Vibration Test System
Here we offer you a RMS electrodynamic vibration test equipment.
RMS Vibration Test System
Air cooled
18kN sine wave
16kN noise
31kN shock
Frequency range 0 - 3 kHz
Mass of the oscillating system 16 kg
Main resonance (unloaded) 2.4 kHz
Max Aplitude Sine 18 mm
Noise,Shock 26 mm
Max velocity sine 1.6 m/s
Noise,Shock 2,65 m/s
Stray field
On table surface 5,5 mT
120mm or above table surface 1 mT
Pneumatic weight compensation
Max 150 kg
Operating air pressure 5 bar
Sliding t...
Here we offer you a RMS vibration vibration exciter SW 3009 with side channel blower SKP49033-01/06Type: SW 3009Condition: used / usedScope of supply: (See picture)(Changes and errors in the technical data, specifications are reserved!)We are happy to answer further questions for you on the phone.
Npf7f
Here we offer a RMS vibration Exciter with power amplifier & cooling fan.
RMS vibration Exciter with power amplifier & cooling fan
Vibration generator SW 1511/2
Power amplifier TGD 3000-000 00
IN: 3X400V-50Hz 14.5 KVA
Cooling fan SWG 108
Condition: pre-owned / used
Scope of delivery: (See image)
Scg239nf
(Errors and omissions in the technical data, information are reserved!)
We can answer questions on the phone for you.
Written order possible by email or fax
CTS/RMS temperature test chamber with shaker system
Air cooled
Here we offer a CTS temperature test chamber with shaker.
Temperature test chamber type: T-65/50
Test chamber volume: 50 litres
Test chamber dimensions:
Height approx. 400 mm, width approx. 400 mm, depth approx. 320 mm
Overall dimensions:
Height approx. 1680 mm, width approx. 1270 mm, depth, approx. 840 mm
Temperature range -60 to +180°C
Cooling rate: 4 K/min
Heating rate: 6 K/min
Temperature constancy: ≤± 0.3
Electrical connection 2...
RMS vibration exciter with power amplifier and cooling fan
Here we offer you a RMS vibration exciter with power amplifier and cooling fan.
RMS vibration exciter with power amplifier and cooling fan
Vibration exciter SW 3009
Pve273
Tightening torque 21 Nm
Screw-in depth 15 mm
Power amplifier TGA 6014
3 x 380V/ 50Hz/ 35A / 23 kVA
Condition: used / used
Scope of delivery: (see picture)
(Changes and errors in technical data, specifications are reserved!)
Further questions we can answer on the phon...
RMS vibration exciter with power amplifier and cooling fan
Here we offer you a RMS vibration exciter with power amplifier.
Vibration exciter SW 1507
Max force 2158 N
max. speed 1,3 ms
Power amplifier TGA 1500
3 x 380V/ 50Hz/ 35A / 8 kVA
Bschuhar2b
Condition: used / used
Scope of delivery: (see picture)
(Changes and errors in technical data, specifications are reserved!)
Further questions we can answer on the phone for you.
Written order possible by email or fax
RMS Vibration Test System
Here we offer you a RMS electrodynamic vibration test equipment.
RMS Vibration Test System
Vibration exciter SW 3006
Power amplifier TGA 1500
Technical data:
B9ivklzxe3
Sine:3,7 kN
Noise:3,7 kN
Shock:3.7 kN
Displacement pk-pk:26 mm
Speed: 0.9 m/s
Acceleration: 80 g
Cooling: air cooled
Condition: used / used
Untested! Tests were not possible
Scope of delivery: (See picture)
(Changes and errors in the technical data, specifications are reserved!)
Further questions we ca...
max. grinding diameter:140 mm
grinding length:450 mm
workpiece length:200 mm
number of grinding positions:2
Emu8vs9uw
sanding disc diameter:175 mm
grinding motor turning speeds up to:3000 U/min
grinding motor:0,8 KW
total power requirement:1,5 kW
weight of the machine ca.:0,3 t
dimensions of the machine ca.:1,2 x 0,9 x 1,6 m
Double spindle tool grinder with CBN wheels
- dressing device
- misc. accessories
material width 450 mm
material thickness 1,0 - 14,0 mm
coil weight 10,0 t
coil internal diameter 470 - 520 mm
coil external diameter 1100 - 2000 mm
no. of straightening rolls 12
straightening roll diameter 2x70 / 2x96 / 8x127 mm
number of draw-in rolls 2
inlet roll diameter 160 mm
min. material width 100 mm
speed 15 m/min
power requirement 75,0 kW
weight of decoiler 6,4 t
weight of straightening machine 12,8 t
dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm
dimensions straightener (WxDxH) 2,5 x...
All wheel ,Cabin ,Air condition
tyres (v):225/75 R 17,5, tyres (h):225/75 R 17,5, running hours:350, first registration:2012, control unit - double acting (1x), control unit - single acting, single lever control unit (electronic), implement carrier, hydrostatic drive, cab suspension (mechanical), radio, towing jaw - automatic _____ Ausa Multiservice implement carrier M 350 H 4x4 Full Grip 2.0 tdi VW engine CommonRail, Euro 5 with EEV, 74 KW / 102 hp MACHINE IS SOLD AS A BASTLER VEHICLE! RUNS ON ...
Description Strip feeding system reel
G2aicjv2
Schleicher type HP-D-02-670
material width 50-450 mm
Material thickness 0,5-2,5 mm
Max. Cross section 1125mm²
Max. Coil weight per side 2500kg
Voltage 24/220/380V 50Hz
Power 1.1 kW
Spreading range: 400 - 550?
With movable control panel
L2200xW1500xH2300
Year of manufacture 06.02.84
Description straightener
Schleicher/GSW Schwabe type RMS 10-53/160-450
Max. strip width 450 mm
Material thickness 0,5-2,5 mm
Voltage 24/220/380V 50Hz
Power 9,1 kW
Roll...
Rolling, feeding and straightening machine make SCHLEICHER type RMS 8 - 53 / 160 - 1050
year of construction 1985
consists of:
- Straightening machine
- control desk
- control cabinet
Technical data:
Strip width 250 - 90 mm
belt thickness 0,5 - 0,8 mm
Drive power 7,7 kW
Number of straightening rolls 8
diameter of straightening rolls 53 mm
Cc7jejfp8y
with
- loop control
used, in good condition
material width 800 mm
coil weight 12,0 t
coil internal diameter 470 - 520 mm
coil external diameter 1500 mm
material thickness 0,4 - 2,5 mm
no. of straightening rolls 8
straightening roll diameter 53 mm
number of draw-in rolls 2
inlet roll diameter 160 mm
speed 35 m/min
material thickness at 150 mm material width 2,5 mm
B2yie9evcz
material thickness at 650 mm material width 1,5 mm
material thickness at 800 mm material width 1,0 mm
power requirement kW
weight t
dimensions straightener (WxDxH)...
material width 1300 mm
coil weight 15,0 t
material thickness 0,5 - 1,5 mm
material width min. 150 mm
coil internal diameter 470 - 520 mm
coil external diameter 800 - 1800 mm
no. of straightening rolls 8
straightening roll diameter 53 mm
number of draw-in rolls 2
diameter of inlet rolls 260 mm
diameter feeder rolls 160 mm
feed length 0,1 - 9999,9 mm
power requirement kW
dimensions decoiler (WxDxH) 2,9 x 1,9 x 2,3 m
weight decoiler 4,8 t
dimensions straightener (WxDxH) 2,75 x 2,0 x 2,0 m
weigh...
Crushing capacity: 6000 b/h
Current: 6,5 A
Voltage: 380 V
Frequency: 50 Hz
Length: 15220 mm
Width: 1300 mm
Height: 22600 mm
Base construction: On dome feet
Features: Fragment tub, noise protection box, slot for manual disposal of single bottles
Cf008rmyyl
Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement)
Capacity: 2400 b/h manual
Q2qhl
Current: 6,5 A
Voltage: 380 V
Frequency: 50 Hz
Length: 1620 mm
Width: 1200 mm
Height: 1900 mm
Base construction: on dome feet
Features: fragment tub, noise protection box
Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement))
Used stainless steel container / transport container
Item number: 10507
Containers are completely emptied.
Final use: food
Manufacturer: Hausach / Ucon
Volume: 900 litres
Type: Standing in galvanized stacking frame
Material (wetted parts): 1.4301 / AISI304
Design: Single wall
bottom: pressed with outlet bead
Topsoil: Vaulted
Bjotlkyqhd
Operating pressure according to type plate: 0.10 bar
Tank dimensions:
total width: 1000mm
total length: 1200mm
total height: 1450mm
Tare weight: approx. 225 kg
ma...
Used stainless steel container / transport container
item number: 10508
Containers are completely emptied.
Final use: food
Volume: 500 litres
Type: Standing in galvanized stacking frame
Material (wetted parts): 1.4301 / AISI304
Design: Single wall
bottom: pressed with outlet bead
Topsoil: Vaulted
Operating pressure according to type plate: 0.10 bar
Tank dimensions:
total width: 1000mm
total length: 1200mm
total height: 1050mm
Tare weight: approx. 195 kg
materials:
Interior: 1.4301 / AISI 304
Ext...
Used stainless steel transport container / silo
Number of pieces: 17
Item number: 10440
Last use: Unknown
Capacity: 650L
Vsshxe
Type: Standing in galvanized frame
Material (wetted parts): 1.4301 / AISI304
Design: Single wall
bottom: conical bottom
Topsoil: Vaulted
Operating pressure according to type plate: ATM
Tank dimensions:
distance drain to floor: 250mm
total height: 1655mm
total width: 830mm
total length: 1030mm
materials:
Interior: 1.4301 / AISI 304
Outside: Galvanized steel
facilities:
N...
Used stainless steel container / transport container / IBC
Final use: Chemicals
Tank cleaned and with hazardous goods approval up to 10/22
Item number: 10495
Volume: 500 litres
Type: Standing in galvanized stacking frame
Material (wetted parts): 1.4301 / AISI304
Design: Single wall
Base: Vaulted
Topsoil: Vaulted
Operating pressure according to type plate: +0.1 Bar
Tank dimensions:
total width: 1200mm
total length: 1000mm
Bi8yqkcpkn
total height: 1000mm
materials:
Interior: 1.4301 / AISI 304
Exte...
We make it easier for you to find: "ausa d175 rms"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
The Werktuigen Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Werktuigen. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.