Field of application: Internal logistics
Lifting capacity: 1.300 kg
Lift height: 266 cm
Clearance lift height: 150 cm
0qyqhle9
Maximum passing height: 195 cm
Technical condition: very good
Visual appearance: very good
Fork carriage: Sideshifter
Please contact Pieter de Vries for more information
ruwterreinheftruck
Field of application: Internal logistics
Empty weight: 4.329 kg
Lifting capacity: 2.500 kg
Cfgzleax9p
Lift height: 378 cm
Maximum passing height: 210 cm
Technical condition: very good
Visual appearance: very good
Fork carriage: Sideshifter
Please contact Martijn Krommenhoek for more information
This AUSA Dumper is the D 1000 AP model from 2016.
Length: 4m 60
Width: 2.40m
Height: 2.75m
Weight: 4545 Kg.
Vv3r23
Tire size: 500/60-22.5
Tilting front unloading system
Bucket capacity to the brim: 3750 liters
Dump capacity in dome: 5225 litres.
Load capacity: 10,000 kg.
Maximum speed: 32 km/h
Kubota V3800-CR-TI-EF02 engine of 83.5 kW (113 hp).
1278 Hours
Vehicle description
Diesel all-wheel drive dumper AUSA D600 AHG
Gmclsqm
year 2007
acc. Counter 1.667 hours
60,5 KW Kubota engine
6.000 KG Payload
4.380 KG Own weight
215cm overall width
All wheel
Joystick control
Rotating trough
Selling price: 16.500,-- net
Also favorable delivery possible !!!
General information
Field of application: Construction
Technical information
Power: 23 kW (31 HP)
Chassis type: rigid
Empty weight: 2.400 kg
Drivetrain
Type of fuel: Diesel
Drive: Wheel
Make of engine: Kubota V-1505
Performance
Top speed: 20 km/h
Functional
Lifting capacity: 1.350 kg
Bzb083omml
Lift height: 400 cm
Maximum reach: 400 cm
Condition
General condition: very good
Technical condition: very good
Visual appearance: very good
Other information
EPA Marked: yes
Additional information...
Field of application: Internal logistics
Empty weight: 4.329 kg
Lifting capacity: 2.500 kg
Lift height: 378 cm
Maximum passing height: 210 cm
Jcgqixv
Technical condition: very good
Visual appearance: very good
Fork carriage: Sideshifter
Please contact Martijn Krommenhoek for more information
General information
Field of application: Construction
Technical information
Power: 23 kW (31 HP)
Chassis type: rigid
Empty weight: 2.400 kg
Drivetrain
Type of fuel: Diesel
Drive: Wheel
Make of engine: Kubota V-1505
Performance
Top speed: 20 km/h
Functional
Lifting capacity: 1.350 kg
Lift height: 400 cm
Jwkey3
Maximum reach: 400 cm
Condition
Technical condition: very good
Other information
EPA Marked: yes
All wheel ,Cabin ,Air condition
Bxa78uml9c
tyres (v):225/75 R 17,5, tyres (h):225/75 R 17,5, running hours:350, first registration:2012, control unit - double acting (1x), control unit - single acting, single lever control unit (electronic), implement carrier, hydrostatic drive, cab suspension (mechanical), radio, towing jaw - automatic _____ Ausa Multiservice implement carrier M 350 H 4x4 Full Grip 2.0 tdi VW engine CommonRail, Euro 5 with EEV, 74 KW / 102 hp MACHINE IS SOLD AS A BASTLER VEHICL...
Used stainless steel container / transport container
Bjotlkyqhd
Item number: 10507
Containers are completely emptied.
Final use: food
Manufacturer: Hausach / Ucon
Volume: 900 litres
Type: Standing in galvanized stacking frame
Material (wetted parts): 1.4301 / AISI304
Design: Single wall
bottom: pressed with outlet bead
Topsoil: Vaulted
Operating pressure according to type plate: 0.10 bar
Tank dimensions:
total width: 1000mm
total length: 1200mm
total height: 1450mm
Tare weight: approx. 225 kg
ma...
We have for sale a complete technological line for extrusion of PVC pipes from 20 to 200 mm, machine capacity 300 kg per hour, we also have a pipe expander.
Qstrv
The line is fully operational, it can be launched in our hall on site. The line has two automatic saws and a semi-automatic vacuum tub and two cooling tubs
Used stainless steel container / transport container
item number: 10508
Containers are completely emptied.
Final use: food
Volume: 500 litres
Type: Standing in galvanized stacking frame
Material (wetted parts): 1.4301 / AISI304
Design: Single wall
Bwvsixh
bottom: pressed with outlet bead
Topsoil: Vaulted
Operating pressure according to type plate: 0.10 bar
Tank dimensions:
total width: 1000mm
total length: 1200mm
total height: 1050mm
Tare weight: approx. 195 kg
materials:
Interior: 1.4301 / AISI...
Used stainless steel transport container / silo
Number of pieces: 17
Item number: 10440
Last use: Unknown
Capacity: 650L
Type: Standing in galvanized frame
Material (wetted parts): 1.4301 / AISI304
Vsshxe
Design: Single wall
bottom: conical bottom
Topsoil: Vaulted
Operating pressure according to type plate: ATM
Tank dimensions:
distance drain to floor: 250mm
total height: 1655mm
total width: 830mm
total length: 1030mm
materials:
Interior: 1.4301 / AISI 304
Outside: Galvanized steel
facilities:
N...
Used stainless steel container / transport container / IBC
Final use: Chemicals
Tank cleaned and with hazardous goods approval up to 10/22
Item number: 10495
Volume: 500 litres
Type: Standing in galvanized stacking frame
Material (wetted parts): 1.4301 / AISI304
Design: Single wall
Base: Vaulted
Topsoil: Vaulted
Operating pressure according to type plate: +0.1 Bar
Tank dimensions:
total width: 1200mm
Bi8yqkcpkn
total length: 1000mm
total height: 1000mm
materials:
Interior: 1.4301 / AISI 304
Exte...
Large GEA CFS mixer grinder, 1500 litres with 200mm grinding head. Machine has touchscreen controls and stainless steel gantry. Has very low running hours (3044) and was grinding chicken breast and thigh meat for satay product.
Vuoxfq
Tote bin loader available at extra cost. This machine cost £245,000 when new.
diameter - mm
workpiece length beliebig mm
work piece width 1500 mm
Sanding height max. 100 mm
feed stepless 1 - 5 m/min
Dust suction hood Ø 200, links mm
sanding disc diameter 250 mm
workpiece width - max. 1 - 100 mm
feed speeds 1 - 5 stufenlos / steples m/min
motor 6 x 2,2 KW / 1000 rpm
dimensions of the machine ca. 2,0 x 2,2 x 2,0 m
Heavy deburring and rounding machine with six oscillating transversal
Disc aggregates in working width 1500mm || - 2 disc aggregates infeed side with
each: la...
Single column hydraulic press, straightening press, punching unit ECKOLD
press frame with hydraulic cylinder, mobile press, punching unit
Type RSD 1500 - 125
Machine. No. 317 / 690 Year of construction approx. 1986
pressure force 150 ton.
throat 125 mm
Dwlv9a
ram stroke 35 mm
table size 280 x 210 mm
ram surface Ø 125 mm
Installation height (ram to table) max. 265 mm
Table height above floor 403 mm
Hydraulic operating pressure max. 500 bar
- without hydraulic power unit
- ram surface with 4 pcs. ...
The DMN-WESTINGHOUSE PTD plug type diverters have been specially designed to route powders and pellets with minimum degradation in pneumatic conveying systems. The PTD plug type diverter is applied in the chemical, pharmaceutical, plastic, food and other related industries. A smooth passage of products is guaranteed by precision machining, a good sealing and a complete obstruction free passage. The user friendly fool proof design enables fast in situ internal examination, cleaning and, if necess...
Extraction installation with briquette press
Extraction Riedex MD150P
Connection diameter 250mm
Capacity 4600 m³ /h
4.2kW main motor
Year of construction 2016
Some damage to the outside, see photos.
Briquette press Hö cker Polytechnik C30/16
Cba0d92cz8
Year of construction 2003
Machine no. 0276
Motor 3kW, 400V, 7.2Amp
30 kg/h
Diameter briquettes 65mm
Overall dimensions: 2400x1750x4700mm (LxWxH), Weight +/- 1000kg
General Data
Measurements width 12000 mm
Measurements depth 5540 mm
Control Unit
Brand SIEMENS
Model Sinumerik
Main Drive
Laser power 4 kW CO2
Movement
X-Axis Movement 1525 mm
Y-Axis Movement 3050 mm
Z-Axis Movement 80 mm
Table
Outer length 3000 mm
Outer width 1500 mm
Media
Main electronic connection 400 V / 50 Hz
Cicgmf2pki
This Balliu LD 1500 PS Laser cutting machine was manufactured in the year 2010 in Belgium and has 19813 production hours. It is equipped with a SIEMENS Sinumerik contr...
Fuel type Remaining
Suitable for the following machines: Mercedes Axor 1840
used Mercedes Axor cab, completely equipped.
Bietf0g
Type: cab long, roof high
Blank part number: A940 600 0205
Comes from Axor tractor type: 1840 LS
Date of delivery: 01.12.2004
First registration: 05.01.2005
Condition for the purchase conclusion is a business activity of the buyer and their appropriate proof. Please send us a proof of your business activity (e.g. sales tax identification number, trade licence or associ...
Stud welder HBS Type CD 1501
Capacitor discharge welder
Efvxb0y9u
Serial. No. 1010825 Year of construction 2010
Order No. 92-10-0151A
Charging energy 1.400 Ws
Capacity 66 mF
Welding range threaded studs M3 - M8, Ø 2 - 8 mm
Welding range plate pins Ø 2 and 2,7 mm
Welding range ISO nails Ø 2 and 3 mm
Welding sequence: 8 - 20 studs/min (depending on application and stud diameter)
welding time: 1 - 3 msec
Mains connection 230 Volt, 50 Hz
- digital display
- Power setting 50 to 220 volts
- Welding gu...
Auto loader for sausages into trays, machine is like brand new but missing the tray conveyor at the end. Easy enough to make one or buy replacement from Marel.
P7div
Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels
Questions about technical specifications, etc. contact us in writing or by telephone.
Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.
O7rh9tsl
offer consists of:
ring eyelet conversion kit
for stitching heads 48/5
Qnp8gdma8
We can also organize the following for you:
packaging, loading, transport ( by ship or plane) including customs
1-head linear scale as desktop version. Suitable for weighing fine granulates such as sugar, salt, glutamate, as well as coarser ones such as seeds, tea, cereals, nuts, glutamate, rice etc. - Specifications: capacity weighing hopper: 0.5 L; weighing range: 1-150g; HBM load cell; accuracy: 0.2-1g; max. speed of the machine in neutral: max. 15 cycles/minute; power: 220V; product contact parts from AISI 304; machine dimensions: L600xW500xH750mm; weight: 80kg.
Bwb8iqzsxq
Please note that our new pr...
PHD 1500 hydraulic tryout test press equipped with 5000 kN pressure cushion
2,500 kN upper slide cushion, platform, spotting function, movable table, electric cabinet, PLC Siemens S7 with LCD color touch display, instrumentation damping vibrations during trimming, drive for maintaining slider/table parallelism, height adjustment of slider position limiters.
According to the information from the ordering party, the device was operated in shift mode, serviced, and undergoing current and maintenanc...
Total number of conversion kits 2 Stück
Year unbekannt
Weight - g
Set of interchangeable parts for eyelets for the universal stapling head Hohner
Rdaaz
48/5 S
Draaibank lathes Travel cross slide in mm 290 Quill travel in mm 120 Thread metric in mm/r (41) 0,1-14 Turning spindle speed in min-1 (12) 25-2000 Max. swing without bridge in mm 690 Max. swing without bridge in mm 274 Tailstock taper MK4/MT4 Swing diameter cross slide in mm 274 Tailstock cone MK4/MT4 Spindle mount MK6/MT6 Spindle bore in mm 80 Cross feed 0.014-0.784 Feed rate 0.031-1.7 Travel top slide in mm 120 Center distance in mm 1500 Max. swing diameter bed in mm 460 Center height in mm 23...
The Werktuigen Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Werktuigen. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.