Type: AT 500 Condition: functionally tested, very good, used - suction capacity 650 l - boiler capacity 500 l - maximum pressure 12 bar - automatic star delta switch
Ch2uxcvtky
Atlas Copco
ZS4 VSD+ 45kW 1.0 E
screw blower
Cigyyg2wzn
Screw blower, oil-free compressing with sound insulation hood with control and frequency converter.
Cooling: air
Drive power: 64.00kW
Final pressure: 1200mbar
Delivery quantity: 7.25 - 30.33m³/min
Motor bearing damage
We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy:
• Fully inspected machines
• Delivered to your jobsite
• Money Back Guaranteed
- Atlas Copco - T 30 R-01 Flexiroc | Used Drill in good condition. Our expert inspector checked 68 inspection points - 68 were approved, 0 showed imperfections, 0 presented issues. Buy it now for
Yvjk2c
EUR 97.000
or make us an offer. We can deliver from Nokia, Finnland to your destination. You can estimate the cost using our price calculato...
Type of fuel: Diesel
Field of application: Construction
Empty weight: 1.100 kg
Make of engine: Kubota
Generator capacity: 30 kVA
Drp8msu0
Transport dimensions (LxWxH): 2.1x0.95x1.11
Please contact Sales Department for more information
Atlas-Copco 240 kVA (1.329 draaiuren) gemonteerd op een van wheel aanhanger (bouwjaar 1997) met een hydraulisch bedienbare lichtmast (+/-9 meter), hydraulische steunpoten en een hydraulisch neuswiel. De genoemde prijs is exclusief 21% BTW. Wijzigingen en schrijf- en typefouten voorbehouden.
= More information =
Type of fuel: Diesel
Vwjfsu
Atlas Copco Generator P 6500 T - NEW/NEW - !
Atlas Copco gasoline engine AC390FD with 8.2 kW, 6.3 kvA continuous power,
Duddeujr
Starter electric / rope pull voltage 400 / 230 V, weight 79 kg,
Connections: 1 x 230 V / 16 A , 1 x 400 V / 16 A
Location of the machine warehouse D-46514 Schermbeck.
Emulsion splitting plant Oil-water separation system
Befumu0m
The inexpensive and permanently reliable
The solution to the problem is usually the oil/water
Separation for dispersed condensates. The
purified water meets the legal
Sewer discharge regulations
-Dimensions: 650/520/H1000 mm
Type of fuel: Diesel
Field of application: Construction
Empty weight: 3.120 kg
Ci0tvbze2z
Make of engine: Volvo Penta
Generator capacity: 200 kVA
Transport dimensions (LxWxH): 3.8x1.2x2
Please contact Sales Department for more information
Machine has been traded in. This is a take-away price.
Is maintenance required.
Operating hours unknown (estimate 30,000)
Power consumption 5.5kW
Ci0wuxcsz0
Price is ex staphorst (NL)
We can ship these for a fee
Pneumatic double diaphragm pump
-Fast venting and immediate suction of the medium
-Dry running without: damage
-Hermetically sealed for: moisture-sensitive liquids
-Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces:
Bcavd2zxj9
-Air max. Pressure: bar
-Air connection: 1 "inch
-Water output: l/min
-Water max. Pressure: bar
-Connection: B coupling
-Dimensions: 480/400/H530 mm
-Weight: 32 kg
We offer you well maintained/ rebuilt Atlas Copco/ Epiroc MB1700 from 2016 with NEW Auto Lube, seal kit, bushes, dust viper, 2 guide plate, 2 guide plate small, 2 shock absorber, dust viper, 2 tool pin, 2 stop pin, chisel, decals, hoses and new painted.
We can ship worldwide.
Kvyfay2x
MB1650 HB2200 HB2500 HB3000 HB3100 HB4100 HB4700 HB2000
Field of application: Construction
Empty weight: 1.060 kg
Make of engine: Deutz D2011L03
Capacity: 5 m³/m
Compressor type: Screw compressors
Civj2zm7wc
Working pressure: 7 bar
Please contact Sales Department for more information
content: 500 cbm
Cayrk3vsvp
capacity in bar:
total power requirement: kW
operating pressure: 11 bar
content: 500 l
temperature range: +50° / -10° °C
weight of the machine ca.: 0,4 t
dimensions L x W x H: m
The container is a standing tank on three-foot.
Generator in very good condition, looks like new. The unit has hydraulic outputs visible in the pictures.
The machine has documents
I issue a VAT invoice
Year 2019
Operating hours: 4510
H8ix9eeum
Model Atlas Copco QAS60
Kva 60
Kw 48.6
V 400
A 87.6
Country of manufacture Spain
I also have other aggregates at attractive prices.
Used diesel power generators in good mechanical condition.
35kVA/28kW.
Engine: Yanmar
Alternator: Sincro
Operating hours: approx. 11000
Manufacturing date: 2004
Available for immediate collection in Denmark.
4699 EUR plus VAT. (VAT extempt if payment from outside Denmark).
EXW Greve, Denmark.
Payment prior to collection.
No warrenty. Bought as is.
Civsz3vwuc
First come first serve.
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
2rnqya
-Stroke: 250 mm
-Piston diameter: 40 mm
-Piston rod: 16 mm
-Price: per piece
-Number: 2 pieces
-Dimensions: 410/55/H55 mm
-Weight: 1.5 kg/piece
We offer you well maintained Atlas Copco/ Epiroc HB2500 from 2014 with NEW Auto Lube, bushes, dust viper, 2 guide plate, 2 guide plate small, 2 shock absorber, elastic pad, dust viper, 2 tool pin, 2 stop pin, diaphragm, seal kit, chisel, decals, hoses and new painted.
B2onpcde83
We can ship worldwide.
Field of application: Construction
Make of engine: Deutz TCD2013
Capacity: 10,4 m³/m
Compressor type: Screw compressors
Cfuuvkssda
Working pressure: 12 bar
Please contact Sales Department for more information
Screw compressor ATLAS COPCO type GA 310 PACK
Ser. # ABP718625
Technical data:
capacity 4,3 m3/min
max. power 10 bar
Speed 2925 rpm.
Dxflg922
Power 30 kW
with
- Water separator
- Flair dryer / Delair DDA 24
- Running time 44711 hours
used, in good condition
Year 2013
Engine hours 10,400
Nominal output power
40 KVA
Dmnkjkd
rated current
57.1A
nominal voltage
400V
Libra
1041 kg
Type of cooling
in
Transport length
2.1m
Transport width
0.95m
Transport height
1.17m
Engine manufacturer
Kubota
Engine type
V3800DI-T
Engine power
38 kW
Emission level
3A
Used diesel power generators in good mechanical condition.
30kVA/24kW.
Engine: Kubota (Japan)
Alternator: Stamford
Operating hours: approx. 25000
Manufacturing date: 2008
Available for immediate collection in Denmark.
3999 EUR plus VAT. (VAT extempt if payment from outside Denmark).
EXW Greve, Denmark.
Payment prior to collection.
Pxq923
No warrenty. Bought as is.
First come first serve.
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
-Manufacturer: Atlas Copco, standard cylinder type C4-200-40
-Stroke: 240 mm
Bub0ad2wri
-Piston rod: Ø 40 mm
-Number: 2x cylinders available
-Price: per piece
-Dimensions: 320/280/H470 mm
-Weight: 34 kg/piece
feed pressure: 10 bar
liter capacity: 10 l
total power requirement: kW
volume capacity: 10,1 l/sec.
Qkp72
Number of working hours: 35642 h
revolutions per minute of the motor:: 1500 U/min.
rated capacity: KW
connected load: 11 kW
machine weight approx.: 488 kg
dimensions L x W x H: ca. 1,1 x 0,8 x 1,0 m
Field of application: Construction
Make of engine: Deutz TCD2013 L04
Capacity: 10,4 m³/m
L9fps9f
Compressor type: Screw compressors
Working pressure: 12 bar
Please contact Sales Department for more information
A fully refurbished desiccant drum, replaced parts:
Top and bottom centre wear seals in PTFE
Outer perimeter wear seals in PTFE
Centre to outer seals in PTFE
Fully guaranteed process in use since 2008 100% satisfaction
Installation service available can offer replacement drum seal, O-rings and demisters
All models available
IMD260, MD27, MD50, MD100-MD400, MD600-MD800, MD1000-MD1300, MD1800-MD2600, MD3, MD4, MD5 & MD6 IMD600-800
This is a service exchange offer
Bpl3hnjco
feed pressure: 9,75 bar
liter capacity: 10,1 l
total power requirement: 5,5 kW
volume capacity: 10,1 m³/min.
Number of working hours: 26071 h
revolutions per minute of the motor:: 3000 U/min.
protection class: CE 0038
machine weight approx.: 310 kg
dimensions L x W x H: 1,2 x 0,6 x 1,0 m
Z2vrs
Condensate separator installed
Type of fuel: Diesel
I3tl8th7i
Field of application: Construction
Empty weight: 750 kg
Make of engine: Kubota D1703
Generator capacity: 14 kVA
Transport dimensions (LxWxH): 1.78x0.87x1.2
Please contact Sales Department for more information
This Atlas Copco ZT37, 2 stage oil free air compressor provides 170 cfm at 7.5bar. The outlet is 1 1/2″bsp connection is 1140kg and 1560L x 990W x 1615H (mm). Great machine ready to go
Sgwag0if
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
-Manufacturer: Atlas Copco, standard cylinder type C4-200-40
-Stroke: 200 mm
-Piston rod: Ø 40 mm
-Total dimensions: 330/280/H510 mm
Gtt3tl3uw
-Weight: 33 kg
An Atlas Copco GA50VSD 2004 air compressor, 68K hours however had a full overhaul to include new coolers and hoses, new air end and complete service at 43K hours. 50kW, 415v variable speed. 324cfm max 13bar
Rbh8qb0r
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
H3xa9ti9
-Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200
-Stroke: 194 mm
-Piston rod: Ø 40 mm
-Total dimensions: 220/265/H645 mm
-Total weight: 24 kg
This Atlas Copco ZT30, 2 stage oil free air compressor provides 163cfm at 7.5bar. The outlet is 1 1/4″bsp connection is 1195kg and 1910L x 965W x 1750H (mm). This compressor is in fantastic mechanical condition, the intercooler pressure is just 2.25bar can be seen running
Byalzeyboc
Atlas Copco Oil Free two stage screw air compressor
102cfm at 7.5bar 415volts 18.5kw 50hz
1560L x 990W x 1545H (mm) 850kg
YOM 2002
Connection 1 1/2" bsp
2uyzly
Ready to go sold Ex Works UK
A set of low hours used oil free air ends, LP & HP taken from compressor with run hours of 24000 hours, removed as part of the all inclusive cover These units are good for 60000 - 80000 hours, I have test run, the intercooler pressure is 2.2bar on load and -0.65bar off load
1616 6990 81 HP Superseded by 1616 7271 81
1616 6960 81 LP Superseded by 1616 7275 81
Y3bx3ejd
Atlas Copco Oil Flooded Rotary Screw Air Compressor system, (with built in refrigerant air Please note this dryer does not work) mounted on a air receiver in full working order requires 3 phase 415V
YOM 2013 only 17398 hours
Qz9iz
We make it easier for you to find: "atlas-copco"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
The Werktuigen Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Werktuigen. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.