ATLAS 1702D
Year: 1985
Operation hours: 10.327
ROPS
Hydr. 2 piece boom
Stick: 1,90 meter
Gripper-, Hammer- line
2 shell grabs
Tyres: 10.00-20 approx 10-20% good
Blade support and 4 point stabilizer
Deutz 6 cylinder engine typ F6L918 with 72kW
CE
Operation weight: 21 to.
Rfscx
Type: AT 500 Condition: functionally tested, very good, used - suction capacity 650 l - boiler capacity 500 l - maximum pressure 12 bar - automatic star delta switch
Ch2uxcvtky
Atlas Copco
ZS4 VSD+ 45kW 1.0 E
screw blower
Screw blower, oil-free compressing with sound insulation hood with control and frequency converter.
Cooling: air
Drive power: 64.00kW
Final pressure: 1200mbar
Delivery quantity: 7.25 - 30.33m³/min
Cigyyg2wzn
Motor bearing damage
We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy:
• Fully inspected machines
• Delivered to your jobsite
• Money Back Guaranteed
- Atlas Copco - T 30 R-01 Flexiroc | Used Drill in good condition. Our expert inspector checked 68 inspection points - 68 were approved, 0 showed imperfections, 0 presented issues. Buy it now for
EUR 97.000
or make us an offer. We can deliver from Nokia, Finnland to your destination. You can estimate the cost using our price calculator. Surf...
-Year of construction 2019
-Weight approx. 9,850kg
-Financing for traders
-Hours approx. 822
-Engine Deutz TCD 3.6 L4 100KW
-20km/h
T9f2cnq
-Street legal
-Customer service NEW / UVV
-All wheel steering / front wheel / crab steering
-Fan reversible
-Automatic climate control
-LED headlights 2x front and rear
-Radio with speakerphone
-Hydr. quick coupler
-Earth bucket 2500 mm TPV 1.55 cbm
-Pallet fork 1200 mm
-3. Control circuit elec.prop.serial
-Pressure relief for control circuit in front
-Socke...
Commission 46352-32
Load capacity 2671 kg
Drive type Diesel
Mast type standard
Lifting height 2925 mm
Overall height 2475 mm
Free lift 0 mm
Forks 1000 mm
technically very good
Cdvro7c0dw
optically very good
tires_front 405 x 70 x 20 air
tires rear 405 x 70 x 20 air
special equipment 3rd valve, working light rear, working light front, heating, full cabin
attachments: bulk material bucket
Type of fuel: Diesel
Drp8msu0
Field of application: Construction
Empty weight: 1.100 kg
Make of engine: Kubota
Generator capacity: 30 kVA
Transport dimensions (LxWxH): 2.1x0.95x1.11
Please contact Sales Department for more information
Atlas-Copco 240 kVA (1.329 draaiuren) gemonteerd op een van wheel aanhanger (bouwjaar 1997) met een hydraulisch bedienbare lichtmast (+/-9 meter), hydraulische steunpoten en een hydraulisch neuswiel. De genoemde prijs is exclusief 21% BTW. Wijzigingen en schrijf- en typefouten voorbehouden.
Vwjfsu
= More information =
Type of fuel: Diesel
-Year of construction 2019
-Weight approx. 9,850kg
-Financing for traders
-Hours approx. 1100
-Engine Deutz TCD 3.6 L4 100KW
-20km/h
Dx30ul2ii
-Street legal
-Customer service NEW / UVV
-All wheel steering / front wheel / crab steering
-Fan reversible
-Automatic climate control
-LED headlights 2x front and rear
-Radio with speakerphone
-Hydr. quick coupler
-Earth bucket 2500 mm 1.55 cbm
-Pallet fork 1200 mm
-3. Control circuit elec.prop.serial
-Pressure relief for control circuit in front
-Socket...
Atlas Copco Generator P 6500 T - NEW/NEW - !
Atlas Copco gasoline engine AC390FD with 8.2 kW, 6.3 kvA continuous power,
Duddeujr
Starter electric / rope pull voltage 400 / 230 V, weight 79 kg,
Connections: 1 x 230 V / 16 A , 1 x 400 V / 16 A
Location of the machine warehouse D-46514 Schermbeck.
Type of fuel: Diesel
Field of application: Construction
Empty weight: 3.120 kg
Make of engine: Volvo Penta
Generator capacity: 200 kVA
Transport dimensions (LxWxH): 3.8x1.2x2
Please contact Sales Department for more information
Ci0tvbze2z
Machine has been traded in. This is a take-away price.
Is maintenance required.
Operating hours unknown (estimate 30,000)
Power consumption 5.5kW
Ci0wuxcsz0
Price is ex staphorst (NL)
We can ship these for a fee
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams
-comes: from an Atlas hydraulic excavator
-Piston diameter: approx. 115 mm
-Piston rod: Ø 70 mm
Zo327qo
-Bore piston rod: Ø 60 x 45 mm
-Bore hydraulic cylinder: Ø 50 x 71 mm
-Stroke: 720 mm
-universally applicable:
-Number: 1x stamp available
-Price: per piece
-Dimensions: 1290/250/H140 mm
-Distance to the center holes: 1130 mm
-Weight: 124 kg
We offer you well maintained/ rebuilt Atlas Copco/ Epiroc MB1700 from 2016 with NEW Auto Lube, seal kit, bushes, dust viper, 2 guide plate, 2 guide plate small, 2 shock absorber, dust viper, 2 tool pin, 2 stop pin, chisel, decals, hoses and new painted.
Kvyfay2x
We can ship worldwide.
MB1650 HB2200 HB2500 HB3000 HB3100 HB4100 HB4700 HB2000
Field of application: Construction
Empty weight: 1.060 kg
Civj2zm7wc
Make of engine: Deutz D2011L03
Capacity: 5 m³/m
Compressor type: Screw compressors
Working pressure: 7 bar
Please contact Sales Department for more information
content: 500 cbm
capacity in bar:
total power requirement: kW
operating pressure: 11 bar
content: 500 l
temperature range: +50° / -10° °C
Cayrk3vsvp
weight of the machine ca.: 0,4 t
dimensions L x W x H: m
The container is a standing tank on three-foot.
Generator in very good condition, looks like new. The unit has hydraulic outputs visible in the pictures.
The machine has documents
I issue a VAT invoice
Year 2019
Operating hours: 4510
Model Atlas Copco QAS60
Kva 60
Kw 48.6
H8ix9eeum
V 400
A 87.6
Country of manufacture Spain
I also have other aggregates at attractive prices.
Emulsion splitting plant Oil-water separation system
The inexpensive and permanently reliable
The solution to the problem is usually the oil/water
Separation for dispersed condensates. The
Befumu0m
purified water meets the legal
Sewer discharge regulations
-Dimensions: 650/520/H1000 mm
We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy:
• Fully inspected machines
• Delivered to your jobsite
• Money Back Guaranteed
Cvojwd7g
1994 - Atlas - 1204 | Used Wheeled Excavator with 11743 hours in poor condition. Our expert inspector checked 53 inspection points - 34 were approved, 14 showed imperfections, 5 presented issues. Buy it now for
EUR 8.500
or make us an offer. We can deliver from Lipsko, Polen to your destination. You can estimate the cost using our p...
We offer you well maintained Atlas Copco/ Epiroc HB2500 from 2014 with NEW Auto Lube, bushes, dust viper, 2 guide plate, 2 guide plate small, 2 shock absorber, elastic pad, dust viper, 2 tool pin, 2 stop pin, diaphragm, seal kit, chisel, decals, hoses and new painted.
We can ship worldwide.
B2onpcde83
Field of application: Construction
Make of engine: Deutz TCD2013
Capacity: 10,4 m³/m
Compressor type: Screw compressors
Cfuuvkssda
Working pressure: 12 bar
Please contact Sales Department for more information
All wheel
Wheel loader Atlas type AR40
Year 2014
Std 6800
Service weight 3250kg
Perkins engine 29,4 kW
Engine completely new instant set
Turbocharger new
Cgkux3n77q
Blade new
The machine is differential controlled
Year 2013
Engine hours 10,400
Nominal output power
40 KVA
rated current
57.1A
nominal voltage
400V
Libra
1041 kg
Type of cooling
in
Transport length
2.1m
Transport width
0.95m
Transport height
1.17m
Dmnkjkd
Engine manufacturer
Kubota
Engine type
V3800DI-T
Engine power
38 kW
Emission level
3A
Pneumatic double diaphragm pump
-Fast venting and immediate suction of the medium
-Dry running without: damage
-Hermetically sealed for: moisture-sensitive liquids
Bcavd2zxj9
-Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces:
-Air max. Pressure: bar
-Air connection: 1 "inch
-Water output: l/min
-Water max. Pressure: bar
-Connection: B coupling
-Dimensions: 480/400/H530 mm
-Weight: 32 kg
Used diesel power generators in good mechanical condition.
35kVA/28kW.
Engine: Yanmar
Alternator: Sincro
Operating hours: approx. 11000
Manufacturing date: 2004
Available for immediate collection in Denmark.
4699 EUR plus VAT. (VAT extempt if payment from outside Denmark).
EXW Greve, Denmark.
Payment prior to collection.
No warrenty. Bought as is.
First come first serve.
Civsz3vwuc
Screw compressor ATLAS COPCO type GA 310 PACK
Ser. # ABP718625
Technical data:
capacity 4,3 m3/min
max. power 10 bar
Speed 2925 rpm.
Power 30 kW
with
Dxflg922
- Water separator
- Flair dryer / Delair DDA 24
- Running time 44711 hours
used, in good condition
Field of application: Construction
Make of engine: Deutz TCD2013 L04
Capacity: 10,4 m³/m
Compressor type: Screw compressors
Working pressure: 12 bar
L9fps9f
Please contact Sales Department for more information
Used diesel power generators in good mechanical condition.
30kVA/24kW.
Pxq923
Engine: Kubota (Japan)
Alternator: Stamford
Operating hours: approx. 25000
Manufacturing date: 2008
Available for immediate collection in Denmark.
3999 EUR plus VAT. (VAT extempt if payment from outside Denmark).
EXW Greve, Denmark.
Payment prior to collection.
No warrenty. Bought as is.
First come first serve.
Type of fuel: Diesel
Field of application: Construction
Empty weight: 750 kg
Make of engine: Kubota D1703
Generator capacity: 14 kVA
I3tl8th7i
Transport dimensions (LxWxH): 1.78x0.87x1.2
Please contact Sales Department for more information
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
-Stroke: 250 mm
-Piston diameter: 40 mm
2rnqya
-Piston rod: 16 mm
-Price: per piece
-Number: 2 pieces
-Dimensions: 410/55/H55 mm
-Weight: 1.5 kg/piece
Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders
H8k3iu7
-Stroke: 50 mm
-Piston diameter: 50 mm
-Piston rod: 16 mm
-Price: per piece
-Number: 2 pieces
-Dimensions: 100/65/H65 mm
-Weight: 0.75 kg/piece
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
-Manufacturer: Atlas Copco, standard cylinder type C4-200-40
-Stroke: 240 mm
-Piston rod: Ø 40 mm
-Number: 2x cylinders available
-Price: per piece
-Dimensions: 320/280/H470 mm
-Weight: 34 kg/piece
Bub0ad2wri
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
-Manufacturer: Atlas Copco, standard cylinder type C4-200-40
-Stroke: 200 mm
-Piston rod: Ø 40 mm
Gtt3tl3uw
-Total dimensions: 330/280/H510 mm
-Weight: 33 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
-Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200
-Stroke: 194 mm
-Piston rod: Ø 40 mm
-Total dimensions: 220/265/H645 mm
-Total weight: 24 kg
H3xa9ti9
We make it easier for you to find: "atlas 1304m"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
The Werktuigen Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Werktuigen. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.