4
Cabin
ref: 307244 Lifting capacity 1800 kg at 500 mm load centre, fork cross section 120 x 60 mm, fork length: 800 mm, suspension: FEM2A, own centre of gravity: 260 mm, manual telescopic forks Grip&Reach, as new, basic length 800 mm, extension 400 mm, cross section 118x58 mm, lateral locking with automatic locking, continuous 8 mm thick wear strip under the basic fork, outer fork open at the bottom, anti-slip device capacity: 1800 forkLength: 800 loadCentreOfGravity: 500 ownCentre: 260 weight: 1...
12
Lot combined duoburners, gas and oil operated Fabr.: Steinmüller, Type 1: G-18-K 1120/800, Type 2: DAG-18-K 1120/800, Year of manufacture: 1996, burner data natural gas burner: heat output GT operation 43.6 MW, calorific value 40.09 MJ/kg, fuel mass flow 1.089 kg/s, control range 1:8, pmax.: approx. 1.500 Pa, exhaust gas temperature 424 degrees, (8 pieces), burner data for dual oil burners: calorific value 42MJ/kg, fuel oil throughput 4,600 kg/h, max. pressure before burner 13 bar, burner operat...
12
Very well maintained multi-blade saw.
Cutting height 90 mm. Passage height 100 mm.
Passage width 800 mm. Cutting width approx. 700 mm.
Hydraulic feed stepless from 0 - 50 m/min.
Hydraulic roller lifting with hydraulic roller pressure.
Hydraulic height adjustment of the saw shaft.
8 pcs. feed rollers on top. 6 pcs. feed rollers below.
Motor 37 KW. Electric control cabinet with control and standstill monitoring. Shafts out and in feed device. HM saw blades.
Fk9ssav
Saw shaft with new bearings. Mac...
3
honing diameter 150 mm
stroke 0,05 mm
throat 410 mm
total power requirement 1,5 kW
Prg8b
weight of the machine ca. 800 kg
dimensions of the machine ca. m
10
15
Qo3a9
Multi-rip saw
Brand: Paul
Type: K34 / G 1800
Year: 2004
Technical Data:
- max. thoughfeed width 1.690 mm
- max. cutting hight (depending on material) 85 mm
- feed from 2 - 48 m/min.
- 8 drive top pressure rollers
- 5 driven bottom rollers
- feed engine power 2,2 kW
- min. workpiece length 340 mm
- max. saw blade Ø 270 mm
- driven top pressure rollers hydraulically adjustable
- drive power 90 kW
- rotational speed 4.500 rpm
- length 1.830 mm
- width 3.040 mm
- height 1.430 mm
- weight 3.500...
11
4
AC motor, electric motor
-Power: 0.9/1.2 kW
-Speed: 1410/2800 rpm
-Voltage: 220 V.
-Shaft: Ø 18 x 40 mm
-Design: B3
-Protection class: P12
-Dimensions: 340/250/H200 mm
-Weight: 21 kg
Vl2b8gg
4
Three-phase motor, electric motor
3y2dgis2
-Power: 0.25 kW
-Speed: 2800 rpm
-Shaft: Ø 11 mm
-Construction: B3
-Protection class: IP 55
-Weight: 7 kg
6
No. 4105:
1 used hydraulic press / riveting press
make G + K,
type SI 40 / 50
year 2000
table 500 x 400 mm
miscellaneous:
Compressive force max. 600 kN
ram stroke 150 mm
weight approx. 4500 kg
2xbjjksn
Immediately free ex works
4
floor-plate length: 470 mm
plate width: 340 mm
7nkd73vzc
plate height: 120 mm
weight of the machine approx.: 107 kg
space requirements of the machine approx.: 470x340x120 m
from a BAZ IMA NORTE VS 800
- 2 clamping plates, without eyelets
T-slots to DIN 650
- a = 14mm; h = 26mm; b = 24mm; c = 11mm
T-slot centerstand = 125mm
- side-slot left and right = width: 20mm
Price per plate
In this offer you will purchase a used color production system "Xerox 800 Colour Press".
Item for sale:
1 x Xerox 800 Colour Press with the following equipment:
incl. 2x large capacity stacker LCS-1
incl. Finisher Interface Module A-GW01
incl. Paperdeck JCF-1
incl. Free Flow Controller (Software expired)
Counter readings:
Total: Approx. 17,171,752 pages
Color: Approx. 15,509,952 pages
Black: Approx. 1,661,800 pages
Condition:
This is a used unit and may show signs of use (minor scratche...
5
For sale we have new diesel gensets with the following data:
Condition : NEW, 2022
Engine : Doosan DP222LB, 664KW/1500 U
Generator : MeccAlte ECO40-2L/4
Rated power: 830 KvA
Continuous power : 750 KvA
Frequency : 50 Hz
Voltage : 400/231 V
Bjnhvj3yyq
RPM : 1500 rpm
Year of manufacture : 2021
Dimensions (LxWxH) : 480x160x250cm
Weight : 5800Kg
Super soundproofed
- High quality galvanized steel acoustic hood
- Pull coated
- Integrated diesel tank 1200L
Auto-start, mains monitoring
Batteries
Power d...
6
"METALIKA" tradition in manufacturing concrete product making machines (manufacturing machines for making paverstones, concrete blocks, curbstones - kerbs, etc) dates back to 1973, we export to 48 countries around the world, you can see the references on our website.
The factory "METALIKA" employs 135 workers, the factory of 6,000 m3 has all the machines for the complete production process, from preparation and laser cutting of metal, through bending and CNC machining, to welding parts and asse...
4
For sale is a K+G weather 90L bowl.
This machine is currently still in the overhaul.
B9o7kne8
Information:
Kutter K+G Wetter 90 STL.
CE-conform execution
Highest running smoothness due to solid, stainless steel covered and bottom closed machine stand
Easy cleaning due to slanted outer surfaces
Machine feet adjustable and vibration damped
Main switch and electrical control integrated in machine housing
Centrally arranged control panel
Temperature sensor for highest measuring accuracy mounted dire...
1
The gravity conveyor for pallets is a gravity and free roller conveyor. The gravity conveyor is a solution to accumulate loads with only the force of gravity as engine...
bought at VM Développement, agent of Comarme and G+Technologies brands
Year 2014
Number of conveyors 10
Departure from the ground at 0cm arrival height 1,00mm Adjustable
Number of pallets / RAMP 16
Gravity conveyor with pallet centering device
Dimensions of the pallets : 800 x 1200mm
Maximum pallet weight : 250 kg
Width : 850 m...
4
Knife grinders for 800 kofama lignum strips
Sharpening bar 800 used 1987
Rating:
Table
Model:
800
Description:
Ibnevyh
800 grinders with a slat knife
2
1 surface grinding machine
make G+H, Geibel and Hotz
type FS 40 Primus SE,
make no. 470186,
grinding length 400 mm
B08abgcgt0
grinding width 200 mm
workpiece height 300 mm
spindle speed 2800 rpm
space requirement approx. 1,4 x 1,2 x 2,2 m
Magnetic plate size 400 x 200 mm
machine weight approx. 1,5 t
6
TOP SANDING MACHINE G&N - MPS1/Kugelmüller
Year of manufacture 2009
Control - Conventional
magnetic clamping plate approx. 200x100mm
grinding height over table approx. 200mm
grinding height over magnetic clamping plate ca. 100mm
Dimensions of cup grinding wheel : 125x60mm
infeed/smallest/step 0.001mm
Speed of grinding spindle approx. 3150 rpm
Grinding accuracy(manufacturer specification)0.002mm
Total power consumption approx. 1KW
honing device
Qjnbjohr
Coolant device
Machine housing
magnetic cl...
1
Your contact persons in our company:
Mr.: Andre Evering
Mr.: Mario Klöver
Mr.: Falk Deutsch
Dimension workbench
approx. 2.940 x 800 x 985 mm (W x D x H)
Dimension shelf
approx. 1,730 x 320 x 985 mm (W x D x H)
B9n7wbcbr0
Included in delivery are:
03 x shelf upright S-1, completely galvanized
total height 1.972 mm
Depth up to height 985 mm: 800 mm
Depth from height 985 mm: 320 mm
02x Shelf upright S-1, completely galvanized
total height: 985 mm
Depth: 800 mm
10 x plastic cover caps
10 x stee...
15
New entry
Offer a precision rotary table - surface grinding machine /vacuum unit, cup grinding machine for difficult materials such as silicon,GaAs, germanium,indium phosphate,AI2O3, piezo ceramics, quartz,territ etc.
with µm precision
Make G&N, Nuremberg
Type : MPS 2 R 300 S with vacuum unit in top condition
year of construction 2004
Machine number : 516705
This adaption of the MPS 2 R300 S is equipped with automatic fine infeed
to the grinding head, gauge block control and vacuum clamping.
...
3
The machine is in the process of overhaul.
Delivery time on request.
Information:
Hopper capacity: 380L
Weight:1200KG
Width:1380 mm
Depth:1040 mm
Height:1330 mm
Frequency:50 Hz
Rated power:19 kW
Total rated current:40 A
Fuse protection (recommended) 3 x 50 A gL.
Speed working auger:180/360 rpm
Speed feeder screw:19/38 rpm
Speed mixing shaft:9.5/19 rpm
Errors excepted and subject to prior sale.
All information is non-binding.
The correctness and accuracy of the information and prices contained...
14
On offer is a meat cutter K+G Wetter SM-65STL.
The machine is overhauled. Completely VA, ready for immediate use. Power 380v.63A.24Kw. Cutter stepless before Wertz 50-5000 rpm. Mixing speed back Wertz 50-500 rpm. Cast iron bowl. 2-speed 9/18 rpm. Temperature monitoring. 6-piece cutter head.2x70-piece wrench.
Renewed parts: bowl, noise cover, cutter head incl. bearings and seals, cutter head sleeve, encoder, bowl gearbox bearing...
More on request.
8p8fa70
Cash payment or prepayment.
Sale on...
Copex Scrap Shear Compression Unit
CVV 630t/800
Volvo Engine Powered
B7i7wvytbc
No Hydarulic Leaks
All cyclinders and bearings in good condition
Several Videos of Machine can be sent via Whats app
6498 Hours Total
7
We sell cheap our fully automatic labeling machine! It was only used for test purposes and is unfortunately no longer needed.
Cbcrq779x2
Machine type: Fully automatic labeling machine b+b
Manufacturer: b+b Automations- und Steuerungstechnik GmbH
Model: FM-DS eco
Labelling: All types of containers! Cylindrical containers (e.g. bottles, cans) and canisters made of plastic, glass, metal and more.
Brief description
The labeler is a labeler for side labeling and wrap-around labeling. It can label up...
7
Faceplate
800 mm diameter
KK 11 diameter 196.885
Bolt circle diameter 235 mm
Face plate height 150 mm
jaw width 70 mm
Qgwhp
Jaw height 90 mm
width of T-slots 28 mm
Weight 420 kg
8
Dimension:
Width: approx. 2,900 mm
Height: approx. 900 mm
Depth: approx. 800 mm
Technical data of the workbench frame:
Manufacturer: Meta (Thyssen)
Type: Multipal S
Included in delivery are:
02x workbench stand, used
material color: sendz. galvanized
stand height: 900 mm
stand depth: 800 mm
Incl. cross and diagonal braces, foot plates
The stands are pre-assembled
( screwed truss )
04x workbench crossbars, used
Cay0cxvvo0
Material color: orange
box profile: 85 x 50 mm
clear width: 2.700 mm
...
4
Name: Chamber Filter Press
Manufacturer: Filox
Type: KF 080.040.025
Year built: 1995
B9n8crtn2e
Empty weight: approx. 5165 kg
Plate size: 800 x 800 mm
Number Plates: 51
Filter area: 52 m2
Press content: 596 liters
Cake thickness: 25 mm
Plate material: polypropylene
Filter pressure:: 16 bar
Construction form: side rail press
Cycle: open
Closing pressure: 380 bar
Plate Transport: automatic
Dimensions: L 5500 mm x W 1900 mm x H 1680 mm
Condition: Used
Technical documentation: yes, in German langua...
7
K&G AutoMince 280 block grinder. In nice condition, can be supplied with optional tote bin loader or elevated conveyor at extra cost.
Byzhj93wxn
3
60 ton hydraulic press stands there like new, was only briefly used as a trial press, table size 1200 x 800 mm incl. belt system and straightener. Weight 14.5 tons. If interested, technical data and operating instructions will be sent.
Fh9w87t
9
foil wrapping machine, manual assembly
Can03jbz3m
3
Angle
Width 800 mm
Height 800 mm
Depth 400 mm
Thickness 40 mm
Juqnqm
6
Dimension:
Width: approx. 2,900 mm
Height: approx. 900 mm
Depth: approx. 800 mm
Technical data of the workbench frame:
Manufacturer: Meta (Thyssen)
Type: Multipal S
Included in delivery are:
02x workbench stand, used
material color: sendz. galvanized
stand height: 900 mm
stand depth: 800 mm
Incl. cross and diagonal braces, foot plates
Goe8tisx
The stands are pre-assembled
( screwed truss )
02x workbench crossbars, used
Material color: orange
box profile: 85 x 50 mm
clear width: 2.700 mm
...
4
max. working width: 2000 mm
for metal sheets up to: 1 mm
Cdea7b0l
opening width top clamping bar: 70 mm
adjustment bending cheek: 10 mm
space needed: 2300 x 600 x 1050 mm
4
Precision flat grinding machine for quick and easy grinding of metals and other materials.
Description
vertical spindle, Topfschleifschiebe, frequency-controlled rotary table with high-precision fine delivery
Cuoq77t
Areas of application
Pre-and finish grinding of metals and other materials with high requirements on the accuracy of the plan. Especially suitable for rings, tuning discs, hard metals and ceramics.
-Mechanical engineering
-Precision mechanics
-Tooling and fixture design
-Traini...
14
Catalog number 6481
TECHNICAL DATA
- max diameter of the disc 350mm
- disc hole diameter 30mm
- shield for the shield
- max cutting height 100mm
- max cutting width 800mm
- the possibility of cutting at an angle in the vertical plane + 90 ° / -90 ° (arm movement or blade movement)
Qa8o2
- the possibility of turning the arm right / left
- arm up / down adjustment
- diameter of the extraction connector 60mm
- 3kW engine
- table top dimensions 1100x1040mm
- dimensions length / width / height 1550x...
15
*2 pieces available*
2ubw3q
Has signs of wear, works perfectly.
A visit in advance is possible at any time.
Viewing by appointment only!
12
Used K&G 325 vacuum cutter, in running condition. Sold direct from factory In Poland. Great value.
Platf
