Wood shredder

Weima WL4 V-Rotor

Year of construction: 2013, Condition: used, Width rotor: 600 mm Rotor diameter: 252 mm Rotation speed of the rotor: 100 rpm Hopper content: 0,5 m³ Number of spindles: 1 Screen hole diameter: 35 mm Main motor power: 18,5 kW Reverse-startup automatic: Yes Hydraulic pusher: Yes Single knives interchangeable: Yes Feeding from top: Yes Shut down while idling: Yes Tool: Reversible cutters Declaration of CE-conformity: Yes Conformity marking: CE mark Weight: 1.320 kg Iswgbzu Space requirement Length: 2,05 m Space requirement Width: 1,2 m Space requirement Height: 1,65 m

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Dimensions (L/W/H) 1700x1130x1595 mm Weight 1300 kg Number of working hours 1741 h WEIMA shredder WL 4, machine will be checked by us ----- The Weima high-performance shredders with their flexible application options Can be used with all types of wood materials (hardwood, softwood, chipboard, MDF Materials, plywood, veneer scraps, etc.) into fuel chips and achieve an enormous volume reduction with bulky materials materials. Functionality : The machine is equipped with a large filling hopper and can be used using a conveyor belt or can be fed by hand. This funnel can do that can be adapted to individual needs and guarantees continuous and cost-effective material feeding without requiring manual assistance must be taken. The hydraulically controlled pusher guides the wood waste to be shredded Cutting area of the rotor and becomes automatic and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant Plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended on gimbals to exert lateral forces on the piston sleeves avoid. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works with a rotor speed of 80 - 120 rpm. The concave ground, aggressive and 4-way rotating knives/cutting turning crowns are located in milled knife pockets on special knife carriers. This patented system guarantees that this is possible for the first time Reduction of the cutting gap between counter knife and rotor, high Throughput performance, low energy consumption and optimal discharge of the shredded material. The sieve mounted under the rotor determines the chip size (10 - 100 mm). A sieve basket that can be opened hydraulically is also available upon request. The power is transmitted from the electric motors via V-belts heavily dimensioned gearbox, which is located on one side of the rotor Shaft stub is attached. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard funnel content: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Paint finish: Weima standard RAL 2002/7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 k included: Electrical control (Moeller/Siemens/Allen-Bradley) Control cabinet (Rittal / Sarell) concavely ground cutting turning crowns (40 x 40 mm) Sern triangle approach Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!) Dpr89H

Condition: used, Year of construction: 2016, Anzahl Messer Z = : 28 Stk Wellenanzahl : 1 Stk Wellendurchmesser : 252 mm Wellenbauform : V- Rotor Drehzahl Motor : 60-100 U/min Trichterlänge : 1050 mm, Logspacer, freischneidender Trichter Trichterbreite : 600 mm Trichterhöhe : 1050 mm Schublade : vierseitig segmentiert Steuerungsart : Siemens SPS Steuerung und 5 m Kabel Motorenart : Langsamläufer Gewicht ca. : 1300 kg Motorleistung : 18,5 kW Absaugdurchmesser : 160 mm Zusatzausstattungen: Schnelle Hydraulilk rückwärts mit Schockventil Iswhe8U

Condition: ready for operation (used), Weima WL 4 In perfect condition. Bvhlfdcbbs

Condition: used, Year of construction: 2024, Sonderpreis – Ausstellungsmaschine Technische Spezifikation WL 4 Trichteröffnung 600 x 800 mm Trichteröffnung mit Logspacer 600 x 1.050 mm Trichterinhalt 0,6 m³ Arbeitsbreite des Rotors 600 mm Durchmesser des Rotors 252 mm Antriebsleistung 18,5 kW Rotordrehzahl 80 -120 U/min Messeranzahl 28 Stück Art und Größe der Messer konkav / 40 x 40 mm, Schneidwendekronen Sieblochung 15-20 mm Lackierung WEIMA Standard RAL 2002 / 7016 Anschlußwert 400 V +/- 5% / 50 Hz Gewicht ca. 1.300 kg Inklusive: • Schaltschrank* ( Rittal ) inkl. elektrische Steuerung ( Moeller / Siemens ) und Sterndreieck-Anlauf • Gummischwingelemente • V - Rotor ( Patentiert ) mit im Profil eingefrästen Messertaschen • Getriebeendschalter • Schiebertakt • Schieber halb zurück • Logspacer Trichter • 2. Messerreihe Lagerort: Lieferant Ully2N7Cml

Condition: ready for operation (used), Year of construction: 1998, Empty load weight: 1,700 kg, WEIMA WL 4 S chopper New knives and counter knives New bearing on gearbox side Hopper opening 600 mm x 900 mm Hopper volume 0.7 m³ Sieve perforation 15 / 20 mm Motor power 18.5 kW Hydraulic unit 0.75 kW Rotor shaft with 17 cutting crowns (can be used on four sides) Concave ground cutting crowns 2 lateral reamer blades Rotor diameter D=368 mm Rotor length 600 mm Rotor speed 90 rpm Automatic star-delta start Hydraulic push floor Suction nozzle D=200 mm Dpjdgt Air speed 28 m/s Overall dimensions: Length 1,930 mm Width 1,190 mm Height 1,800 mm Weight 1,700 kg

Condition: good (used), Hydraulic slide valve Rotor diameter approx. 250 mm Feed opening approx. 600 x 800 mm Rotor length approx. 600 mm Motor 18.5 KW D7Vbhzk Technical data on request

Condition: like new (used), Year of construction: 2009, Functionality: fully functional, Overall weight: 1,300 kg, WEIMA -Zerkleinerer-Shredder Bmfhh97Lub Typ: WL.4. 18.5.kw

Condition: new, Year of construction: 2023, Year of manufacture: 2023/3 Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs S7Oatkd Funnel: 600 x 1050 mm Machine with standard equipment

Condition: good (used), Year of construction: 2009, Functionality: fully functional, Machine/vehicle number: WL 4, Overall weight: 1,300 kg, WEIMA-Shredder WL 4 Fziirsg KW 18,5

Condition: new, Year of construction: 2024, Year of manufacture: 2024/1 Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm Machine with standard equipment Dmnod2Q3

Condition: excellent (used), Year of construction: 1996, Power: 18.5 kW (25.15 HP), WEIMA. Shredder Typ: WL 4. Do0Mzp Antrieb: 18.5 kw. Rotorbreite: 600 mm.

Condition: new, Year of construction: 2024, Year of manufacture: 2024/1 Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Blafnhwazqe Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm Additional equipment: 4-sided ribbed sliding plate and double row of knives

Condition: new, Year of construction: 2024, WEIMA shredder/shredder for shredding many types of wood waste such as production waste, waste wood, etc. Type:WL 4 Drive:18,5kW. Rotor width: 600mm with second row of knives (28 pcs.) 40x40 mm concave Bhg390Bnf8O complete with connected switch cabinet (with 5m cable) with logspacer hopper opening (600 x 1050 mm) Weight: 1300 kg

Condition: new, Year of construction: 2024, WEIMA WL.4. Shredder Antrieb: 18.5 kw Baujahr:2023. B9Lpxsqqei

Condition: excellent (used), Year of construction: 2008, Gross GAZ 62 single-shaft shredder built in 2008 V-rotor Gu93Y7Cmb New knives and counter knives New rotor bearings Hopper opening 600x850mm Hopper capacity 0.6m/3 Working width of the rotor 600mm Rotor diameter 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Number of knives 14 pieces Type and size of knives concave / 40 x 40 mm Screen perforation 15/20 mm Connected load 400 V +/- 5 % / 50 Hz Weight approx. 1,300 kg Can be tested under power at our premises. Forklift available for loading

Condition: as good as new (ex-display), Year of construction: 2024, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Onfonc3Bz Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available

Condition: used, Year of construction: 2006, Machine/vehicle number: 500-7769, A small shredder with big capabilities. The 22kW motor will ensure uninterrupted operation on both soft and hard wood. The chipper can process a wide range of wood waste that accumulates, for example in carpentry or joinery workshops, sawmills or the furniture industry. The list includes pallets and crates, as well as long and short wood offcuts, veneers, chipboard, fibreboard, plywood, as well as joinery products such as bulky furniture, window profiles, doors and stairs. Technical specifications: • 22 kW motor • Year of manufacture: 2006 • 28 knives • Blade size 40x40mm • Weight 1300 kg • Width of rotor 600mm • Length: 1900mm Xsyilhgy • Width: 1680mm • Height: 1800mm

Year of construction: 2024, Condition: new, WEIMA WL4 Zerkleinerer Rfg9Lr9Wb7 Antrieb:18.5.kw.

Condition: excellent (used), Weima WL4S 12mm chipper screen no1 Crvydltbft Width 59.5cm Mesh opening 12mm Weima chipper application

Condition: as good as new (ex-display), Year of construction: 2024, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer:600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Ev8Oyqp Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Top equipment Location: Ex stock Bitburg - immediately available - at a special price

Condition: new, Year of construction: 2024, Single-shaft shredder Weima / HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating blades / reversible cutting crowns are located in milled blade pockets on special blade carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW Uwclosmy0Z 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: like new (used), Year of construction: 2007, Weima ZM30S 2x15Kw year 2007 Reinforced version with main shafts 125mm and auxiliary shafts 95mm Larger blade diameter: HW: 310mm NW: 266mm Cutter opening: 680x545mm Very few operating hours Dplugp Knives in mint condition Shaft bearings and motors on gearbox newly sealed, new oil, Knives freshly resharpened. Perforated sieve 20mm Weight approx. 1800Kg

Condition: new, Year of construction: 2024, The LR700 is a single-shaft shredder that was designed for a broad range of applications. Customers appreciate its compact design and universal application opportunities. The tried-and-tested UNTHA cutting system and the powerful, wear-free swivelling pusher ensure the reliable shredding of different types and volumes of wood. The robust machine frame and high-grade components have a particular long service life. Thanks to the compact design, the machine only has a small footprint. The powerful drive system and the high speed of the pusher ensure a high throughput. The homogeneous final product is extremely well suited for use in a wood-chip heating system or for manufacturing wood briquettes. Areas of application » Hard and soft wood » OSB » Chipboard panels » MDF panels » Veneers Bdq8S9Gw » Cap pieces » etc. The machine is equipped with one row of knives and an 18.5KW motor. Machine available from stock.

Condition: new, Year of construction: 2024, Brand New - available immediately Dimensions LR1000 WxHxD 1805 / 2005x1630x1706 mm Rotor diameter 300 mm Shredder chamber opening 1000 x 1050 mm Hopper capacity approx. 1000 L. Qunir Drive Drive power 1x30 kW Construction Flexible belt drive, Elastomer shock absorbers Power of the hydraulic aggregate 2.2 kW Rotor speed 96 U / min Gear Bauweise 2-speed oil-bath transmission. Cutting tools Number of knives 54 Pieces Control Cable length. engine - control cabinet 4 m Cabinet dimensions WxHxD 600 / 760x760x210 Requirements for the electrical installation Air temperature + 0ºC to + 40ºC Power Voltage and voltage stability 0.9 - 1.1 of the rated voltage Frequency 0.99 - 1.01 Rated frequency 0.98 1.02 short-term. cos φ = 0.90 - 1.00. Limits for voltage fluctuations - unbalanced, voltage drop and overvoltage In accordance with EN60204-1; 1997 Fuses [A] 1x30 kW: 100 Service space The service space necessary for good machine operation is 700 mm on each side! Lifting equipment Extraction connection Ø 250 mm The minimum speed of sucked air. 28 m / s Additional data weight About 3000 kg Noise level (DIN 45635-31): Workplace sound pressure level (LpA, 1m) Acoustics Level (LWA) ca. 82 dB (A) ca. 90 dB (A)