Mechanic lathe WEILER MDU mit Spannzangenfutter, Hebelsupport

WEILER Primus

used

€5,500

Call

Nr. 3629: Lsjdndgpa 1 gebr. Leit- und Zugspindel-Drehmaschine Fabr. WEILER Typ Primus weitere Daten und Fotos auf Anfrage

Listing

Ubstadt-Weiher

7892 km

Weiler Matador VS2

like new (used)

€26,500

ONO plus VAT

Call

Weiler Matador VS-2 Lead & Tension Spindle Lathe with 3 Axis Digital Readout K&C NEW Geometrically Overhauled !!! Technical data: >> Machine-No. 91-0017 >> Center height 140 mm >> Center width 500 mm >> speed: 15 - 3550 rpm >> spindle passage 36mm >> short taper spindle head DIN 55022-5 with bayonet lock >> tailstock MK 3 >> feeds from 0,012 to 0,9 mm /U >> Possible threads metric , inch , module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 Kg >> Lengt...

Listing

Bühl

7895 km

Lathe - cycle-controlled

WEILER E 50/1

1997

used

Call

greates pass round over bed 570 mm swing diameter over slide rest 340 mm turning length 1100 mm centre height 280 mm centre distance 1000 mm spindle bore 66 mm spindle turning speed range 1 - 2500 U/min feeds - longitudinal 0,001 - 20 mm/U feeds - cross 0,001 - 20 mm/U rapid travel - longitudinal/face 10 / 5 m/min thread - mm pitch 0,1 - 250 mm thread - inch 1/4 - 56 Gg/" Cgixr3a2ig thread - module 0,125 - 28 mm workpiece weight max. 1300 kg spindle head DIN 55027 Gr. 8 max. torque on the spind...

Listing

Ahaus

7617 km

Cantilever rack used length: 11.500 mm

WEILER PRAKTIKANT 500 R

used

Call

turning length 500 mm turning diameter 280 mm turning diameter over slide rest 150 mm Bm080aco spindle bore 36,0 mm tailstock quill taper MT 3 MK bed width 205 mm turning speeds 42 - 2000 U/min spindle taper DIN 55027/5 voltage 380 V total power requirement 3,8 kW weight of the machine ca. 610 kg range L-W-H 1500 x 640 x 1200 mm Furnishing: - RÖHM 3-jaw chuck Ø 200 mm - RÖHM 4-jaw chuck Ø 200 mm - MULTIFIX quick-change holder, with inserts - Movable tailstock - chuck key - Machine base with ...

Listing

Hessisch Lichtenau

7826 km

L + Z Lathe

WEILER Ergodor B1

1988

used

Call

L + Z Lathe WEILER type Ergodor B1 Machine No. 126 Year of construction approx. 1988 center distance 450 mm turning diameter over bed 280 mm center height over bed 140 mm turning diameter over support 160 mm center height over support 80 mm Spindle bore in draw tube 35 mm chucking short taper DIN 55027 size 5, 4 x M10 Tailstock inner taper MK 3 Pinol adjustment 85 mm Spindle speed 30 - 3550 rpm. 16 steps drive power 3 kW Mains connection 380 Volt, 50 Hz - spindle speed over 16 gear steps - 3-jaw...

Listing

7 Kragarmregal-Ständer mit Dachträger Kragarmregal Höhe 4.200 mm x 1.200 mm

Bad Feilnbach

8183 km

7 Kragarmregal-Ständer mit Dachträger Kragarmregal Höhe 4.200 mm x 1.200 mm

2022

like new (used)

€5,910

ONO plus VAT

Call

Cantilever rack with roof girder: hot-dip galvanized bolted system Scope of delivery: 7 shelf uprights height 4,200 mm with foot section useful depth 1200 mm 21 cantilever arms with 1,200 mm useful depth, standard 7 roof girders with 1,500 mm projection pre-drilled for roof construction (Without wooden purlins and trapezoidal sheets for roof construction) 12 longitudinal bracings for 1,900 mm center distance 4 diagonal bracings for 1,900 mm center distance Gox2yen Incl. fastening material (With...

Listing

7633 km

Lathe - cycle-controlled

WEILER E 80 / 3000

2001

used

Call

turning diameter over bed 810 mm turning length 3.000 mm control Sinumerik 840 D Siemens swing diameter over face slide 510 mm radial face slide travel 410 mm travel upper slide 140 mm bed width 480 mm turning tool - shaft cross cut 32 x 25 mm Main spindle: turning speed range - main spindle 1 - 1.800 min/-1 transmission ratio 2 transmission ratio 1 1 - 450 min/-1 Tcbqz transmission ratio 2 4 - 1.800 min/-1 power capacity - main spindel 37,5 / 30 kW max. Torque 3.150 / 2.600 Nm spindle head ...

Listing

Niederlangen

7585 km

CNC Lathe

WEILER E30

1997

used

Call

turning diameter 330 mm turning length 750 mm control SIEMENS Sinumerik 810 turning diameter over slide 160 mm spindle bore 40 mm turning speed range 1 - 4500 U/min quill stroke 110 mm quill: MK 3 diameter of quill 50 mm total power requirement 11 kW weight of the machine ca. 1300 kg dimensions of the machine ca. 1800 x 1200 x 1700 m CNC lathe - cycle controlled - Chip protection wall with two moveable sliding protection hoods - Workroom lighting - Three-jaw chuck - Quick change steel hold...

Listing

Korschenbroich

(dealership location)

7648 km

Lathe - cycle-controlled

WEILER E 50-1

1992

used

Call

serial number 0736201 centre distance 1,.100 mm 570 mm 3-jaw chuck 250 mm multifix documentation Ytrvdo weight of the machine ca. 2,8 t

Listing

GEWEMA-CNC-Holzfräse mit Vakuum, sofort lieferbar 2513

Holm

7670 km

cnc-processing center

GEWEMA-CNC-Holzfräse mit Vakuum, sofort lieferbar 2513

2020

as good as new (ex-display)

€39,900

Support cylinder with hand pump

Call

axis stroke (X,Y,Z):2500x1300x190 mm Number of spindle head vertical:1 St. Brbop3zlsx Number of spindles head horizontal:0 St.

Listing

Bruchsal

7891 km

L+Z Drehmaschine

WEILER Praktikant 160 B

1991

excellent (used)

Call

L+Z lathe Weiler trainee 160 B Stock number: 04-03-056 Machine data: Year of manufacture: approx. 1991 L x W x H: approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ** Machine is in very good used condition ** ** Delivery time immediate prior sale reserved ** ** Machine workshop tested ** B7ygga8h Technical specifications: Digital Display: 3 - Axis - Digital Display Dimensions: Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter over support: approx. Ø 198 mm Max. ...

Listing

Olching

8116 km

CNC lathe

WEILER DZ 42 CNC

2001

used

Call

Manufacturer: WEILER Model: DZ 42 CNC Year of manuf.: 2001 Control: Siemens 840 D _____ Description: Mainspindle:Technology:Belt-driven spindle Speed:6.000 rpm Power:22 kW Torque:210 Nm Barcapacity:42 mm Workpiececlamping:Collet chuck Subspindle:Technology:Belt-driven spindle Speed:5.000 rpm Power:5,8 kW Torque:18 Nm Workpiececlamping:Collet chuck, Röhm KZF 40/Z-80 Movement in Z:300 mm Rapid travers in Z:30 m/min Toolcarrier I (X/Z):Technology:Turret with 16 stations Taper:VDI 20 Tooldrive:4....

Listing

Wiefelstede

(dealership location)

7608 km

mit Stützrollen 130/100/700

used

€450

Call

Hydraulic cylinder, support cylinder -Piston diameter: approx. 130 mm -Piston rod: 100 mm -Stroke: approx. 700 mm -with support rollers -Each cylinder with hand pump -Number: 3x cylinders available 20sqy3fj -Price: per piece

Listing

Bühl

(dealership location)

7891 km

Second-Operation Lathe

WEILER

used

Call

turning diameter over bed - mm turning diameter over slide rest - mm turning length 250 mm centre height 125 mm turning speeds 1800 U/min total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Bqwj8d2 with 6-hole turret acc.: various collets for turret

Listing

Korschenbroich

(dealership location)

7648 km

Lynette

WEILER W2

1980

used

Call

Weiler W2 Cxoob2f hollow 280 mm centre height 440 mm bed width 320 mm weight of the machine ca. 200 kg

Listing

Schwabach

8026 km

Vertical band saw

MÖSSNER mit Vorschubtisch , SSF 501

1980

used

Call

Technical data : Table size 800 x 820 mm , Table travel approx. 350 mm , cutting height under guide approx. 400 mm speeds infinitely variable approx. 15 - 944 m/min. . Equipment : - hydraulic feed table , - hydraulic unit with hand lever operation and fine adjustment via throttle and various saw bands Buofn7dl .

Listing

Heeze

7577 km

WEILER Condor VS2

like new (used)

€11,500

Semi automatic pallet wrapper

Call

Weiler Condor VS2 Leit and feed shaft lathe in excellent condition, technical and geometric like new, New painting. Technical Data: - machine Nr.6527 - Center height 165 mm - Center width 800 mm - Spindle speeds: from 12 to 2800 r / min - spindle passage 40 mm - short taper Spindle head Camlock 4 - tailstock MK 3 - Motor brake switchable - feeds 0.026 to 1.253 mm / U - Possible Thread metric, inch, module and diametric - pitch metric thread pitches from 0.35 to 12 mm - Weight app...

Listing

KVK 1A mit Ausschnitt für Hubwagen- elektromagnetischer Bremse

Pulheim

7670 km

KVK 1A mit Ausschnitt für Hubwagen- elektromagnetischer Bremse

2022

excellent (used)

€5,299

sheet metal folder, box and pan segments

Call

Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable, which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. Only the feeding and cutting of the film must still be done manually with this winder. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a 1500 mm turntable and can wrap pallets up to 2400 mm h...

Listing

Prod-Masz Abkantbank mit Segmenten Segmentabkantbank 1,4m/1.5 Klavierbank

Bad Berleburg

7760 km

Prod-Masz Abkantbank mit Segmenten Segmentabkantbank 1,4m/1.5 Klavierbank

2023

new

€5,200

Fixed price VAT not applicable

Call

Multi-use, powerful, heavy and very massive segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding bench is characterized by the full segmentation over the entire working length of 1.40M. The upper and lower segments can be removed quickly and easily, and the bending beam is divided into segments. The bending angle is from 0 to 155 degrees. Lock with the pedal, the hands are free and you can easily position the sheet metal - open and close...

Listing

Niederlangen

7585 km

WEILER LZ280

used

Call

turning diameter 280 mm turning length 800 mm swing diameter over bed slide 155 mm speeds 50-1700 U/min spindle bore 24 mm morse taper 2 MK Ccpt9cm3t3 total power requirement 1,4 / 1,9 kW quill stroke 80 mm weight of the machine ca. 800 kg dimensions of the machine ca. 1800 x 1200 x 1200 mm - Röhm 4-jaw chuck Ø 130 mm - Quick-change tool holder with 2 tool holders - Movable tailstock - live center

Listing

Beroun

8154 km

Lathes - CNC

WEILER E30 x 70 INV 21960

2018

good (used)

Call

Listing

Lienz

8297 km

Several autotransformers

SBA, Trafomodern mit 20.000/40.000 VA

like new (used)

Call

2 SBA transformers with 40.000 VA, unused, to sell 600 euros each (excluding VAT and freight costs)! Prepayment! More product information: see photos Bvofxmgzvc Several transformers from SBA and Trafomodern, hardly used or not used at all, for 200 euros each excluding VAT and freight costs! (Transformer no.8 (see pictures): bracket broken) Power: 20,000 VA, 50-60 Hz

Listing

Heeze

7577 km

Tool room lathe

WEILER Praktikant 140B

1993

excellent (used)

€15,500

Semi-automatic pallet stretch-wrapper

Call

Weiler Praktikant 140B toolroom lathe in excellent condition with digital read-out, toolcabinet with tooling. Original paintwork. Specifications: * Machine No. 93-140-3586 Y.o.c. 1993 * Peak height 140 mm * width 650 mm * Speed: 48 / 2500 U / min * spindle bore 40 mm * spindle nose DIN 55027/ 5 * tailstock MK 3 * feeds from 0.02 to 0.63 mm / rev * Possible thread Metric, inch, module and diametric pitch * metric thread pitches from 0.25 to 8 mm * Motor brake * Weight app. 700 kg...

Listing

Pulheim

7670 km

KVK 1A mit Ausschnitt für Hubwagen- elektromagnetischer Bremse

2022

excellent (used)

€5,199

Call

Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable, which in comparison to the KVK 2 MA is equipped with a cut-out for ground-level access with a hand pallet truck. Only the feeding and cutting of the film must still be done manually with this winder. With a weight of 700 kg this model is also designed for professional use and can be loaded up to 1500 kg. B9oczuxsg9 The 1A has a 1500 mm turntable and can wrap pallets up to 2400...

Listing

Ølstykke

7662 km

Fine mechanical lathe

WEILER LZD 220

1976

like new (used)

€4,420

Call

Very nice and very well maintained lathe, with lots of accessories, is fitted with a Ø 110 mm center chuck. Power connection 400V CE plug. has manual variable speed, bore is 23 mm, also comes with a box of gears to make threads marking. Giy0thxp0

Listing

Niederlangen

7585 km

WEILER Praktikant

used

Call

turning diameter over bed 300 mm Fb99wy9 turning diameter over slide rest 150 mm turning length 800 mm spindle bore mm turning speed range 42 - 2000 U/min feeds 0,011 - 0,91 mm/U tailstock quill taper MT 3 total power requirement 2,2 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,7 x 0,8 x 2,0 m

Listing

Leipzig

7966 km

Lathe - cycle controled

Weiler E 80/3

1996

used

Call

turning diameter over bed: mm turning dia. over face-slide: mm turning length: 3050 mm swing over bed: 810 mm swing diameter over slide rest: 510 mm centre distance: ca.3000 mm centre height: 400 mm swing diameter: über Kröpfung: 850 mm face slide travel: 410 mm control: Sinumerik 805 Weiler revolution per minute: 1 - 450 und 4 - 1800 U/min spindle passage: Ø 106 mm max. workpiece weight between centres: 3400 kg operating hours - idle run: 23492 h tailstock taper ISO: MK 6 X7tf80c7 tailstock qui...

Listing

Willich

7640 km

WEILER Commodor

1990

used

Call

. turning diameter max. 380 mm centre distance 1000 mm Nbkecl hollow 56 mm output 4 kw multifix .

Listing

Hessisch Lichtenau

7826 km

L + Z Lathe

WEILER Condor 81 A

1985

used

€14,800

Call

L + Z lathe WEILER type Condor 81 A Machine No. 36553 Year of construction approx. 1985 center distance 750 mm turning diameter over bed 330 mm center height over bed 165 mm Yw8gxw turning diameter over support 180 mm center height over support 90 mm spindle bore 40 mm chucking short taper DIN 55027 size 5 Tailstock inner taper MK 3 Pinol adjustment 110 mm Spindle speed 45 - 2800 rpm. 16 steps drive power 3 kW Mains connection 400 Volt, 50 Hz - spindle speed over 16 gear steps - 3-jaw lathe chuc...

Listing

Bickenbach

7855 km

Center lathe

Weiler Matador

used

Call

Listing

Hilden

7668 km

Radial Drilling Machine

WEILER VO 75

2008

used

Call

bore capacity in steel (diameter) 75 mm arm length 386 - 2000 mm workpiece height max. 2000 mm vertical swivel arm adjustment max. 950 mm bore slide adjustment 1614 mm spindle taper 5 MK spindle stroke - max. 380 mm number of gear stages 16 spindle turning speed range 11,2 - 2000 U/min quill feed 0,035 - 2,8 mm/U Sue9f spindle capacity 7,5 kW spindle throat 386 - 2000 mm distance spindle nose - table 670 - 2000 mm weight of the machine ca. 7,1 t Equipment / Accessories: - cooling device - d...

Listing

Niederlangen

7585 km

Pallet wrapper turntable stretching

WEILER Condor VS2

used

Call

turning diameter 330 mm turning length 800 mm swing diameter over bed slide 170 mm Qqwmf speeds 12 - 2800 U/min spindle bore 30 mm morse taper 3 MK total power requirement 2,2 kW quill stroke 120 mm weight of the machine ca. 850 kg dimensions of the machine ca. 1900 x 800 x 1700 mm

Listing

ATLANTA - mit Doppel Schnurbildung MYTHO - flacher Drehteller

Ludwigsburg

7944 km

ATLANTA - mit Doppel Schnurbildung MYTHO - flacher Drehteller

2021

as good as new (ex-display)

€8,500

EXW ONO plus VAT

Call

Exhibition machine - like new. MYTHO EASY Low C0muzmjdt3 Very low machine in height Winding height 2400mm Turntable 1650mm LP Flat turntable 30mm flat - 500mm long Max. Loading weight: 1200 KG PowerStretch 200%, changeable by gears 150-200-250%. Automatic adjustable double cord formation - see pictures. Automatic. Cutting Optionbal: foil clamp on turntable German. Schuko plug 6 programs individually storable Further demonstration unit immediately available from stock.

Listing

Weiterstadt

7845 km

WEILER lathe

WEILER Condor W

1980

used

€4,900

Call

Weiler lathe leading and traction spindle Type Condor VS 2 center height 160 mm turning length 800 mm Multifix B with holder Tailstock MK 3 speed stepless 23 -1650 rpm Cze8jlgbqz Rotary current 400 Volt

Listing

Oberpframmern

8157 km

Universal Center Lathe

WEILER Praktikant 160

like new (used)

Call

The machine was conscientiously overhauled by us with new Easson 3-axis digital display electrically secured chuck protection -new- spindle brake 2 emergency stop switches spindle cover of the pulling and leading spindle machine is UVV conform 160 x 670 mm spindle bore 38 mm 48 - 2.500 rpm. Multifix cassette holder size A with cassettes three-jaw chuck 160 mm Collet device Rhson collets 57 pieces 1 - 29 mm, 0,5 mm rising 1 drill chuck -new- 1 roller punch The machine, the guides and the gea...

Listing

Berlin

(dealership location)

7943 km

Center Lathe

Weiler Werkzeugmaschinen Condor VS1

1977

ready for operation (used)

Call

Center distance: 800mm, turning diameter: 170mm, rotational speed: 24-2800/min, max. workpiece weight flying: 100kg, connected load: 3kW, weight: 815kg, with tapping function, three-jaw chuck, collet holder and bezel. Gtcqt8p8o

Listing

Flensburg

7582 km

WEILER Matador W 1

1976

good (used)

€5,400