Drilling Line

WEEKE BST 500 D

Condition: used, machine/vehicle number: 006157, Max. panel width: 1000 mm Max. panel length: 2500 mm No of Bottom Units: 5 Dlvrzd No of Top Units: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: excellent (used), AUTOMATIC MULTI-BORER "WEEKE" In line with another machine possible Numerical Control Power Control Software WoodWop (TOPDRILL BST 500) Through-feed motorized transport belts (No.) 2 (with adjustable speed) Horizontal units/supports (No.) 2 Drilling heads/Blocks for each horizontal unit (No.) 2 Spindles for each horizontal drilling head (No.) 11 Max. working width (mm) 3000 Min. working width (mm) 250 Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (No.) 2 Spindles for each drill head of the bottom vertical supports (No.) Various Top vertical units/supports (No.) 2 Drilling heads/block for each top vertical unit (No.) 2 Spindles for each drill head of the top vertical supports (No.) F92Avcl Vertical top pressure clamps (No.) 6 Transport belt to evacute chips (wastes) Quota (axes) digital display Total installed power (Kw) 26

Condition: used, machine/vehicle number: 005662, Max. panel width: 2500 mm Max. panel length: 1000 mm 3Lnldwc2K No of Bottom Units: 7 No of Top Units: 2 Lateral horizontal groups: yes

Condition: refurbished (used), Numerical Control Type Power Control Professional Software woodWOP / TopDrill BST No. 2 Through-feed motorized conveyoring belts (4 x Kw ?) No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the bottom vertical supports No. 2 Top vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each top vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the top vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes H3Agicqa8 Total installed power (Kw) 36

Condition: used, machine/vehicle number: 005660, Max. panel width: 2500 mm Dmetgx Max. panel length: 1000 mm No of Bottom Units: 8 No of Top Units: 3 Lateral horizontal groups: yes

Condition: reconditioned (used), Double-side working machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting 9X7O7Lc9V Electronic Programmer CONTROL SYSTEM IPC/NC WITH CONTROL SIMATIC C7 Software WINDOWS 98 Through-feed motorized conveyoring belts (N°) 2 Horizontal units/supports (N°) 2 (digital quota) Dowels inserting nozzles (and Glue Injectors) N. 5 + 5 Max. working width (mm) 2500 Min. working width (mm) 250 OPTIONAL: Bottom vertical units/supports (N°) 3 (digital quota) Drilling heads/blocks for each bottom vertical unit (N°) 2 Spindles for each drill head of the bottom vertical supports (N°) 11 Vertical top pressure clamps (N°) 3 Motorized carpet to evacuate chips and wastes Total installed power (Kw) 22

Condition: used, machine/vehicle number: 007267, Max. panel width: 1300 mm Max. panel length: 1000 mm No of Bottom Units: 5 No of Top Units: 3 Buvu7Jclds Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007236, Position 1: Roller Conveyors HOMAG + WEEKE-BST 500+FPR620 undefinedPosition 3: Roller Conveyors HOMAG + WEEKE-BST 500+FPR620 Position 4: Roller Conveyors HOMAG + WEEKE-BST 500+FPR620 Dpl88H Position 5: Automatic Drilling Machine HOMAG + WEEKE-BST 500+FPR620

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 3Jtzg X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Condition: used, machine/vehicle number: 007202, Max. panel width: 2500 mm Bsk99Tusl9I Max. panel length: 1000 mm No of Bottom Units: 3

Condition: excellent (used), Numerical Control Type Power Control Software TOPDRILL BST 500 No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 Ifiiq9Ucm No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the bottom vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 20

Condition: used, machine/vehicle number: 006993, Max. panel width: 2500 mm Max. panel length: 1000 mm No of Bottom Units: 3 Bokqb3Ofmhy

Condition: used, machine/vehicle number: 006158, Max. panel width: 1000 mm Max. panel length: 2500 mm No of injectors: 14 Positioning of Units by NC: yes Cihttnjspq

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Br9Al2Hjcyg

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PowerControl (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machines with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) With pushing system to automatically infeed the workpiece Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 2500 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y) 0A87Huk WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y)

Condition: used, Year of construction: 2007, Working dimension X: 2.500 mm Working dimension Y: 1.300 mm Working dimension Z: 80 mm Number of milling spindles: 2 Main motor power: 6 kW Rotation speed max: 18.000 rpm Tool clamping system: ETP 25 Dqlj8F Vertical drilling spindles: 76 Horizontal drilling spindles in X: 18 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Outfeed: belt conveyor Safety device: Safety mat UPS - Uninterruptible Power Supply: Yes Control: HOMAG POWER CONTROL PC 85T Software: SCHULER MDE BASIC, HOMAG WOODWOP 5.0 Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 20 kW

Condition: excellent (used), Year of construction: 2007, WEEKE BHX 500 - year 2007 - immediately available Cnvw9Fh7Eg - Workpiece length 200 - 2500 mm - Workpiece width 70 - 1000 mm - Workpiece thickness 4 - 80 mm

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-09-2894, Workpiece length X: 200-3050 mm Workpiece width Y: 50-1250 mm Workpiece thickness Z: 8 -80 mm Equipment DRILLING GEAR V 10 HIGH SPEED incl. quick-change system and spindle clamping HORIZ. DRILLING GEARBOX WITH 6 SPINDLES X_DIRECTION HORIZ. DRILLING GEARBOX WITH 2 SPINDLES Y_DIRECTION NUT SAWING IN X/Y DIRECTION 90° DOWEL INSERTION STATION PLAUSIBILITY CHECK (X/Y) TOOL CHANGING SPINDLE 10 KW incl. converter DRILLING GEAR V 10 HIGH SPEED incl. quick-change system and spindle clamping Cnp02Dbcfc HORIZ. DRILLING GEARBOX WITH 6 SPINDLES X_DIRECTION HORIZ. DRILLING GEARBOX WITH 2 SPINDLES Y_DIRECTION 4-FOLD PICK-UP CHANGER Sideways WORKPIECE CLAMPING SYSTEM RETURN SYSTEM CONTROL: POWERCONTROL with Powertouch Operating voltage: 400 VOLT Frequency: 50 HZ

Year of construction: 2008, Condition: excellent (used), Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 machining dimension X: 2.500 mm machining dimension Y: 1.300 mm Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 Cauuczac7G drilling spindles horizontal X: 16 drilling spindles horizontal Y: 4 grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18.000 rpm Disassembled - directly available

Condition: used, machine/vehicle number: 006351, X axis working area: 4250 mm Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 38 Ch9Zi2Besy

Condition: used, machine/vehicle number: 007219, Max. panel width: 1400 mm Max. panel length: 2500 mm No of Top Units: 2 Positioning of Units by NC: yes Lateral horizontal groups: yes Bljqlzewn0E

Condition: used, machine/vehicle number: 006413, X axis working area: 2500 mm Y axis working area: 1200 mm Main Electrospindle power: 6 KW Number of controlled axes: 3 axes H07Erqng Total number of drilling spindles: 92

Condition: used, machine/vehicle number: 005990, X axis working area: 2500 mm Y axis working area: 1000 mm Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Cdvcedvq Total number of drilling spindles: 92

Condition: used, machine/vehicle number: 005910, X axis working area: 2500 mm Y axis working area: 1000 mm Qynb7 Main Electrospindle power: 6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 112

Condition: used, machine/vehicle number: 007390, Position 1: Vertical CNC Machine Centres WEEKE-BHX 200/D + KR 120 Bk2U3Ayvia Position 2: Robot WEEKE-BHX 200/D + KR 120